Drilling of tubewell by FDR machine and providing and installation of single phase motor pumps at various places Ujjain city

Carrying out the resistivity survey by VES method using schlumberger confirguration for locating the proper spot with three soudings for drilling of tube well with in the selcted habitation, including photography, interpretation of resistivity data and submission of report in the desired format along with resistivity readings, necessary graph and photographs. 20/20.1

Drilling of perfectly vertical bore hole of a diameter suitable to receive 200 mm nominal diameter casing pipe upto desired depth below ground level inclusive of the labour charges for transporting, lowering and fixing of 200 mm nominal diameter M.S./ G.I. / U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete

(a) In all types of collapsible strata consisting of soil clays, moorum, graval,boulders etc. (From 0.00 to 17.85 mtr.)

(b) In all types of rocks. (From 17.85 to 18.00 mtr.)

Drilling of perfectly vertical bore hole of 200 m.m. diameter up to desired depth below ground level including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete.b)In all types of rocks. (From 18.00 to 98.00 mtr) 20.7.2

(a) In all types of collapsible strata (intertrappen formations) including charges for transportation and making all necessary arrangements etc, including lowering and fixing of 150 mm nominal diameter (GI of UPVC casing pipe). (From 98.00 to 110.50 mtr) 20.7.1

Drilling of perfectly vertical bore hole of 150 mm dia mtr. up to desired depth below ground level in all types of rock including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete. (From 110.50 to 240.00 mtr) 20.5.

Providing and fixing of well cap on top of the tube well for protection M. S. Caps -200 mm dia 20.9.4

ISI marked UPVC casing pipe confirming to IS 12818/92 (with upto date amendments) CS Casing pipe 200 mm dia 20.26.10

ISI marked GI casing pipe (plain) medium class in 4 to 7 mtrs length one end fitted with socket as per IS:1239 (part-2) 1992 with IV revision (upto date amendments) 150 mm dia 20.25.3

Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ±10%, 3 Ph, 50 Hz A.C. supply, with cable guard, thrust carbon / fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge outlet as per manufacturer's design. Anti‑thrust streamlined non‑return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump. Submersible Pump set 100 mm dia(with Polypropylene/ Noryl Impeller) up to 20 stages 5.0 HP 16.3.1.6

Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make. 4.0 Sq.mm multi strand MPPHED SOR 11.5.2

Supplying and laying of approved Make Nylon rope 12mm thick complete with binding for support of pump and motor 11.6

Labour only for lowering of single phase submersible pumping set of capacity 1 to 3 hp in the tube well with flexible/ rigid pipe line assembly, electrical cable, nylone rope, testing etc. Complete including connecting the electrical cable from pump & starter - \depth up to 150 mtr.

Providing, laying, jointing and field testing of High Density Polyethylene pipes (HDPE) confirming to IS 4984 / 14151 / 12786 / 13488 with necessary jointing material like mechanical connector or jointing pipes by heating the ends of pipes with the help of Teflon coated electric mirror / heater to the required temperature and then pressing the ends together against each other to form a monolithic and leak proof joint by thermosetting process. It may be required to be done with jacks / hydraulic jacks / butt fusion machine. (50 mm and above fusion jointed and below 50 mm mechanical jointed) 40 mm Outer Dia 10Kg sor no. 7.1.4

Providingand fixinggunmetal/ brass check (non-return) valves Class-II, female ends, tested to 21.09 kg/sq.cm. 40 mm sor no. 6.8.5