Loading
Loading…
Loading…
Tender Value
₹4.2 Cr
EMD Value
₹3.6 L
Closing Date
10 Apr 2025, 1:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
Above/Below/Par
DYCSTE2MLG
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of "V/N" or "V" whichever is less; where V= Advertised value of the tender in crores of Rupees N=Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-D, Part C, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: i.Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or ii.Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or iii.One similar work costing not less than the amount equal to 60% of advertised value of the tender. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. Signaling works of RRI or PI or EI indoor works with or without outdoor works with supply of EI or Relay and other signaling equipment. Special Condition: The Successful bidder shall submit an undertaking from RDSO approved EI OEM, before supply of material, to confirm compliance with extant RDSO guidelines and to meet contract specific requirements.
Any other condition as per Tender document.
1 condition
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
"Design, supply, installation, testing and commissioning of Electronic Interlocking System (Hot Standby) including all INDOOR WORK in connection with Provision of EI Training Setup at STTC/PNO in LUMDING DIVISION of N.F. Railway"
DyCSTE_C_2_MLG_2025_05_01
DyCSTE_C_2_MLG_2025_05_01
Open
Works - General
180 Days
Kamrup, Assam
₹0
₹3.6 L
10 Apr 2025
6 Mar 2025
140 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 2,79,07,952.69 | ||
| — | 110.00 | — | — | ||
| Design, manufacture and supply of Hitachi Make Electronic interlocking hot standby suitable for 25 KV RE Area system complete as per Special condition of contract and technical specifications enclosed mainly consisting of micro-processor equipments, interface equipments, PC based operator's console with DUAL (MAIN+STANDBY) VDU(minimum 55" Size), Relay rack, relays , interlocking cables,maintenance terminals for EI (42"),Power supply equipments racks, fixture mounting arrangement and accessories necessary to make the system functional for following stations as per RDSO Specification RDSO/SPN/192/2019 Ver.2.0 or latest: (i) 2 RL Single Line Station (Centralised)- 110 Function. This item also includes Supply of essential spares which shall consisit as mentioned below item . A. Input Cards, - 1 No, B. Output cards, - 1 No, C. PSU Card, - 1 No, D. CPU Card, - 1 No, E. DC-DC converter of each Type,- 2 Nos. F. VDU with Embeded PC of all Type/Size (Operator +Maintenance VDU), - 1 No. G. Fuses of each Type,- 20 Nos. H. All type of Indoor Relays.- 11 Nos. I. Cards Other than Above : Minimum 1 No. against each Card. The above components of spares are compulsory against this item. If any other material certified by OEM as Essential Spare other than above, then the same will be supplied free of cost by the contractor. NOTE-: 1) Successful Bidder has to give breakup of E.I Cards/Modules/Relays and other accessories Station-wise duly certified by OEM at the time of submission of MoU from RDSO Approved EI OEM. Also he has to submit Rate of each E.I Cards/Modules/Relays and other accessories as above for part Payment Purpose only. 2) The contractor has to supply all types of Indoor Relays as per RDSO approved Typical or N.F Railway typical circuits which is applicable to make the System functional and in case of left out of the required Relay in the list breakup cost of items, the contractor has to supply the Relays free of cost. 3) The Tenders cater for functions as stated in Qty column. In case of decrease of function, the Contractor will be paid fully for the Tendered Quantity against the hardware supplied. In case of increase of function, the Railway will procure required cards/Relays and other associated accessories as variation, considering it as separate item, 4) The list of Essential Spares is to be certified by OEM . | — | — | — | 90,56,395.7 | |
| — | 164.00 | — | — | ||
| Design, manufacture and supply of Kyosan Make Electronic interlocking hot standby suitable for 25 KV RE Area system complete as per Special condition of contract and technical specifications enclosed mainly consisting of micro-processor equipments, interface equipments, PC based operator's console with DUAL (MAIN+STANDBY) VDU(minimum 55" Size), Relay rack, relays , interlocking cables,maintenance terminals for EI (42"),Power supply equipments racks, fixture mounting arrangement and accessories necessary to make the system functional for following stations as per RDSO Specification RDSO/SPN/192/2019 Ver.2.0 or latest: (i) 4 RL Double Line Station (Centralised)- 164 Function. This item also includes Supply of essential spares which shall consisit as mentioned below item : . A. Input Cards, - 1 No, B. Output cards, - 1 No. C. PSU Card, - 1 No, D. CPU Card, - 1 No. E. DC-DC converter of each Type,- 2 Nos. F. VDU with Embeded PC of all Type/Size (Operator +Maintenance VDU), - 1 No. G. Fuses of each Type,- 20 Nos. H. All type of Indoor Relays.- 20 Nos. I. Cards Other than Above : Minimum 1 No. against each Card. The above components of spares are compulsory against this item. If any other material certified by OEM as Essential Spare other than above, then the same will be supplied free of cost by the contractor. NOTE-: 1) Successful Bidder has to give breakup of E.I Cards/Modules/Relays and other accessories Station-wise duly certified by OEM at the time of submission of MoU from RDSO Approved EI OEM. Also he has to submit Rate of each E.I Cards/Modules/Relays and other accessories as above for part Payment Purpose only. 2) The contractor has to supply all types of Indoor Relays as per RDSO approved Typical or N.F Railway typical circuits which is applicable to make the System functional and in case of left out of the required Relay in the list breakup cost of items, the contractor has to supply the Relays free of cost. 3) The Tenders cater for functions as stated in Qty column. In case of decrease of function, the Contractor will be paid fully for the Tendered Quantity against the hardware supplied. In case of increase of function, the Railway will procure required cards/Relays and other associated accessories as variation, considering it as separate item, 4) The list of Essential Spares is to be certified by OEM . | — | — | — | 1,35,02,262.68 | |
| — | 6.00 | — | — | ||
| Supply, Installation, Testing and Commissioning with OEM certification of modular power supply arrangement for VDU(42"-85") and provison for power supply of embedded PC with input and output redundancy arrangement and hot pluggable modules having voltage & load current digital display on each module. Each set consisting of:- 1. Isolated inverters (master/slave with auto changeover) -2 Nos. input: 110VDC, output: 110VAC, 500VA (as per RDSO TAN No. STS/E/TAN/3012 Version 3.0 Dated. 03.11.22). 2. Input(redundancy) O-ring diode module with two input sources and one output supply along with potential free contacts, alrarm, and acknowledgement switch. 3. 3U stainless steel rack with back panel mother and front panel power connectors with auto changeover facility for embedded PC | — | — | — | 9,20,400 | |
| — | 1.00 | — | — | ||
| Supply of PC based Portable Work Station for Data input and configuration, simulation and functional testing, diagnostics and trouble shooting and commissioning of EI system as per TS. | — | — | — | 1,61,312.74 | |
| — | 2.00 | — | — | ||
| Earthing (Ring earth with minimum Ten earth Electordes) of EI Equipments along with supply of all requisite materials including welding as per RDSO TAN No. STS/E/TAN/3006 Ver.1.0 dated 02.11.2012 or latest & as per drawing(enclosed in technical specification) Note :- Earthing material used for earthing to be supplied from RDSO approved source if any. The unit earth shall be as per RDSO spec No,RDSO/SPN/197 Ver.1.0 or latest. Supply of all materials and installation preocedure should be as per RDSO latest design of earthing for EI to suit hotstandby system. Beautification of earthing area with Grass/Plantation or as per instruction of Engineer Incharge is to be done. | — | — | — | 11,49,468.82 | |
| — | 100.00 | — | — | ||
| Supply & laying of 25 X 3 mm pure electrolytic copper tape for loop earthing and bonding as per site requirement. | — | — | — | 56,818 | |
| — | 2.00 | — | — | ||
| Supply and installation of Workspace/ Table (Modular) of suitable size for Dual VDUs as per drawing of IRSEM Drg. No. 21-D5. for provision of 2 Nos. VDU of size 55 inches on top either end and manual veeders counters at center as per RDSO EIs standard circuit directive with wooden supporting sidewall and self-inside the bottom with covered WPC wall throughout the table to accommodate Various EI equipment like 2 Nos. embedded PC, two FDMS & their power supply arrangement, communication equipment, CPU, various terminals etc. The back side door should be provision for locking and sealing arrangement, and the table should have enough airflow as needed. They ought to have two exhaust fans available. The table needs to be set on 10 mm rubberized antistatic matting. There should be two key board trays available. Service light should be provided inside the cabinet enclosure for maintenance of equipment which should switch on with opening of back panel automatically with optional provision of manual on/off switch. Two Nos, of chairs for each station of make Godrej/Methodex/Zuari Model PCH-7002 or similar for operators along with the table are to be provided. Before supply of above materials , necessary drawings, size, make etc. are to be appoved by Engineer In-Charge | — | — | — | 12,50,854.9 | |
| — | 200.00 | — | — | ||
| Supply and installation of ISI marked anti Electrostatic mat of standard size having 2 mm in thickness Blue colour as per instruction of Engineer In charge. Proportionate payment will be made if Thickness of mat varies as per the instruction of Engineer Charge | — | — | — | 35,078 | |
| — | 2.00 | — | — | ||
| Installation and wiring of Power Supply arrangement including laddering and drawing of wires etc. as per technical specification - . Note:-All IPS related works, except installation of IPS, is to be carried out, as per directions of Engineer In Charge and ladders to be supplied by contractor having minimum width 300mm and iron angle of size shall be 25mmX25mm with Grey Sigma Coating. Closed slotted duct of Blue colour or any other as instructed along with other accessories (end cap,T- bend etc.) to draw flexible cables, wires, power cable etc. to be supplied by contractor. Ring Arrangement for 110V & 24V and other supplies are to be provided, as per directions of Engineer In Charge. | — | — | — | 1,37,595.84 | |
| — | 4.00 | — | — | ||
| Supply of Relay fail safe electronic timer conforming to IRS:S;61-2000 with Amendment No.1 or with latest Amendment/specification, mounted on Q series realy base & covered.with fix timing of 60/120/180/240 second (as specified) complete with connectors, retaining clip. | — | — | — | 13,473.4 | |
| — | 2.00 | — | — | ||
| Installation, testing and commissioning of EI equipments supplied as per items no. 1 and 2 of Schedule-A, as per RDSO Specifications. No. RDSO/SPN/192/2019 Version 2.0 or latest. Note: 1.Relay Test Jigs to be provided in Relay Room/Equipment Room for 24 V (DC), & 110 V (AC) seperately. 2.All 24 Fibers to be spliced for VDU and sufficient number of spare patch cords to be made available. 3.Ladders having minimum width 300mm and iron angle of size 25mmX25mm with Grey Sigma Coating to be supplied by contractor. 4.Close slotted duct of Blue colour or any other as instructed along with other accessories (end cap,T-bend etc) to draw flexible cables, wires, power cable etc. to be supplied by contractor. 5. FAT and SAT to be done by OEM. | — | — | — | 13,64,936.74 | |
| — | 1.00 | — | — | ||
| Supply of insulated Tools kits and measuring instruments for testing, maintenance and repair at site. The following tools shall be provided by the manufacturer against this item: i) True RMS digital multimeter:-RISHMulti 16S (3 ¾ Digit Auto-ranging DMM) or similar. i i ) Clamp type Earth Resistance Meter ( Make- Fluke 287/MEGGER/RISHAV or better). iii) Insulation Resistance Tester, Fluke 1507 Insulation Tester or superior. iv) EI Card extractor and any other tool recommended by OEM of EI v) Crimping tools for all types ofspecial cable assembly used in EI system. (vi)Insertion tool for all types of special cable assembly used in EI system. (vii) Removal tool for all types of special cables assembly used in EI. (vii)Clamp Current Meter. (Fluke 287/MEGGER/RISHAV or better) | — | — | — | 1,71,706.13 | |
| Man-Month | 1.00 | — | — | ||
| Training on EI system at Site / Field / HQ office of PCSTE/ MLG: for Technician, Supervisors & Officers | — | — | — | 87,649.74 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .