Repair/Renovation of Divisional Office Jal Shakti (PHE) Division Doda by way of Providing and fixing of Doors, Windows, Tile work, whitewash etc. and other allied works

Amount

Earth work in bulk excavation by Manual means over areas (Exceeding 30 cm and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. On plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be leveled and neatly dressed in all kinds of soil.

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 fine sand) including curring.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead of area of 3 sqm. and below.

Labour engage for clearence of mulba/ mud fuska etc and other necessesary work at divisional office comlex.

Carriage of raw meterial mulba mud fuska etc by Mechenical transport to stack place as per direction of Engineer incharge.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).Second kail wood 35mm.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.12 mm thick pre-laminated particle board (decorative lamination on both sides) for door panelled grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848 and pre-laminated conforming to IS: 12823, Grade-I, Type-II marked.

4 mm thick glass pane (weighing not less than 10 kg/sqm)

Providing and fixing wooden moulded beading to door and window frames with necessary nails, etc. complete job.

Providing wood work in joist wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) Second class kail wood

Providing and fixing 6mm plywood for walls complete Job as per direction of Engineer incharge.

Providing and fixing PVC Panelling for walls complete Job as per direction of Engineer incharge.

Providing and fixing electric fitting for two room and gallery including Fans, tube light Exhaust fan etc complete job.as per Direction of Enginer Incharge

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :125x65x2.12mm

Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete 125 mm

Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete 100 mm

Providing and fixing ISI marked eldrop for doors with necessary bolts screws etc, complete job.

Repair of 02 Nos. Washroom , including Fulsh, cestran box, bibcok, valve etc as per direction of Engineer incharge ( paid to be as per actual)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer.

Colour washing such as green blue or buff to give an even shade New work (two or more coats) with a basecoat of white washing with lime.

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

carriage of Cement from market including loading unloading and stacking 01 km by Mechenical Transport & 100 meter by head load.

carriage of Sand and stone agg. 20mm Size from Source including loading unloading and stacking 07 km by Mechenical Transport & 100 meter by head load.

Providing Supply one No. Wooden Office Table

Provision for Office Chair.

Supply of Tuffen Glass 4 x 6

Providing Supply of HP Computer System HRD 500GB, 04GB RAM 19 inch size, UPS single Battery and HP LaserJet Printer Blank in white complete job.

NAWAZ AHMED