Painting work of Type F Government Houses No 19 to 30 SC Compound Golghar Gorakhpur in Gorakhpur district Lot No 4 of 12

Dismantling existing plaster including disposal of refuse as directed by the Engineer- in - charge within a distance of 60 metre (200 feet) as per DSR 15.56

Scraping old white or colour wash includin disposal of refuse as directed by the Engineer - in - charge within a distance of 60 metre (200 feet) as per DSR. 13.91

Repairs to plaster of thickness 12 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.As Per DSR 13.4.2 With cement mortar 1:6 (1cement: 6 coarse sand)

Providing and applying white cement based putty of 1mm thickness over plastered surface to prepare the surface even and smooth complete As per DSR 13.80

Finishing walls with Acrylic Smooth exterior paint of required shade & New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 0.9 kg/10sqm.).:-DSR.No.13.111.1

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre.As per DSR No- 13.41

Providing and fixing fly proof galvanised M.S. wire gauge to windows and clerestory windows using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm. as per S.I.DSR No. 9.51.1

Renewing glass panes and refixing existing wooden fillets:Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm As per As per DSR No- 24.4.2

Painting letters upto 2.5 cm. size complete including supply of all items, labour and materials and T&P etc.S.I No As per 818 Ch- 13.9

Supply and fixing of 10cm internal dia A.C down pipe everest or charminar make complete with bends with door at top and plain at bottom and grating and including supply of necessary M.S clamps 2.5cm x3mm fixed to walls with and including supply of 15cm long 6mm dia nails all material labour and T&P etc Required for completion of the work and also including repair of plaster pointing etc. If damaged during fixing of the pipe. S.I No- 730 CH-19

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part 1) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges Description with necessary screws As per DSR 9.21.2

Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 25 mm diameter.As per DSR No- 14.28.2

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32mm dia (Flexible pipe) As per DSR No- 17.28.2.1

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :as per DSR 17.25.1.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. linternal work - Exposed on wall :As per DSR No-18.10 .15 mm dia. nominal bore DSR No- 18.10.1

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. linternal work - Exposed on wall :As per DSR No-18.10 20 mm dia. nominal bore DSR No- 18.10.2

Providing and fixing brass bib cock of approved quality: As per DSR 18.15.1

Providing and fixing C.P. brass long body bib cock of approved quality conforming to ISI Stards, 15 mm nominal bore DSR No. 18.51.1

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm Nomunal Bore DSR No. 18.50.1

Providing and fixing water Closet squatting pan (Indian type) W.C. Pan size 580 x 440mm CERA with 100 mm Sad Cast Iron P or S Trop with all fittings & Fixture canplule but white vitreous china orissa patirn W.C. panof size 580 x 480 mm with integral type foot rests as per DSR No. 17.2.2

Providing and fixing Towel rail of approved quality conforming to ISI Stards Required for proper completion of the work as per DSR No. 7506 PMT 600 mm 17.73.2

40 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete As per DSR 2023 Vol-1 (11.3.1)

Please Enable Macros to View BoQ information