REPAIRS AND POLISHING TO WOODEN FURNITURE INCLUDING ALL TYPES OF TABLE AT NAVAL BASE UNDER GE(SB) KARWAR

Amount

M & L for removing unsv top of Table dining 8 persons (Drg No. C3/MEC/SP/201/MO/25) by S & F new table top in one piece made out of 18/19 mm thick plywood commercial BWP grade ISI marked fixed with 1.5 mm decorative lamination of required shade including teak wood edging made out of 1st class well seasoned teak wood free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as shown on drawing and as directed .

M & L for removing unsv top long rail of Table dining 8 persons (Drg No. C3/MEC/SP/201/MO/25) by S & F new top long rail made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv top short rail of Table dining 8 persons (Drg No. C3/MEC/SP/201/MO/25) by S & F new top short rail made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv leg of Table dining 8 persons (Drg No. C3/MEC/SP/201/MO/25) by S & F new leg made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv stiffener of Table dining 8 persons (Drg No. C3/MEC/SP/201/MO/25) by S & F new stiffener made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv hard rubber shoe of Table dining 8 persons (Drg No. C3/MEC/SP/201/MO/25) by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

Preparation of old decorated / new replaced parts /surface of Table dining 8 persons (Drg No. C3/MEC/SP/201/MO/25), smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

M & L for removing unsv top of Table dining 8 persons (Drg No. C3/MEC/SP/193) by S & F new table top in one piece made out of 18/19 mm thick plywood commercial BWP grade ISI marked fixed with 1.5 mm decorative lamination of required shade including teak wood edging made out of 1st class well seasoned teak wood free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as shown on drawing and as directed .

M & L for removing unsv top long rail of Table dining 8 persons (Drg No. C3/MEC/SP/193) by S & F new top long rail made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv top short rail of Table dining 8 persons (Drg No. C3/MEC/SP/193) by S & F new top short rail made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv leg of Table dining 8 persons (Drg No. C3/MEC/SP/193) by S & F new leg made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv stiffener of Table dining 8 persons (Drg No. C3/MEC/SP/193) by S & F new stiffener made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv hard rubber shoe of Table dining 8 persons (Drg No. C3/MEC/SP/193) by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

Preparation of old decorated / new replaced parts /surface of Table dining 8 persons (Drg No. C3/MEC/SP/193) smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

M & L for removing unsv top of Table dining 6 persons (Drg No. MEC 2913) by S & F new table top in one piece made out of 18/19 mm thick plywood commercial BWP grade ISI marked fixed with 1.5 mm decorative lamination of required shade including teak wood edging made out of 1st class well seasoned teak wood free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as shown on drawing and as directed .

M & L for removing unsv top long rail of Table dining 6 persons (Drg No. MEC 2913) by S & F new top long rail made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv leg of Table dining 6 persons (Drg No. MEC 2913) by S & F new leg out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv top short rail of Table dining 6 persons (Drg No. MEC 2913) by S & F new top short rail made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv hard rubber shoe of Table dining 6 persons (Drg No. MEC 2913) by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

Preparation of old decorated / new replaced parts /surface of Table dining 6 persons (Drg No. MEC 2913) smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

M & L for removing unsv top of Table dining 6 persons, 1500 x 900 mm (Drg No. FD/MAP-II/03) by S & F new table top in one piece made out of 18/19 mm thick prelaminated particle board exterior grade confirming to IS including teak wood edging 6 mm thick made out of well seasoned teak wood free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed .

M & L for removing unsv top long rail of Table dining 6 persons, 1500 x 900 mm (Drg No. FD/MAP-II/03) by S & F new top long rail made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv top short rail of Table dining 6 persons, 1500 x 900 mm (Drg No. FD/MAP-II/03) by S & F new top short rail made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv leg of Table dining 6 persons, 1500 x 900 mm (Drg No. FD/MAP-II/03) by S & F new leg out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv stiffener of Table dining 6 persons, 1500 x 900 mm (Drg No. FD/MAP-II/03) by S & F new stiffener out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv hard rubber shoe of Table dining 6 persons, 1500 x 900 mm (Drg No. FD/MAP-II/03) by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

Preparation of old decorated / new replaced parts /surface of Table dining 6 persons, 1500 x 900 mm (Drg No. FD/MAP-II/03) smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

M & L for removing unsv top of Table dining 6 persons, 1500 x 900 mm (Drg No. FD-273) by S & F new table top in one piece made out of 18/19mm thick prelaminated particle board exterior grade confirming to IS including teak wood edging 6 mm thick made out of well seasoned teak wood free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed .

M & L for removing unsv top long rail of Table dining 6 persons, 1500 x 900 mm (Drg No. FD-273) by S & F new top long rail made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv top short rail of Table dining 6 persons, 1500 x 900 mm (Drg No. FD-273) by S & F new top short rail made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv leg of Table dining 6 persons, 1500 x 900 mm (Drg No. FD-273) by S & F new leg out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv stiffener of Table dining 6 persons, 1500 x 900 mm (Drg No. FD-273) by S & F new stiffener out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv hard rubber shoe of Table dining 6 persons, 1500 x 900 mm (Drg No. FD-273) by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

Preparation of old decorated / new replaced parts /surface of Table dining 6 persons, 1500 x 900 mm (Drg No. FD-273) smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

M & L for removing unsv top of Table dining 4 persons, 1200 x 900 mm (Drg No. FD/MAP-II/03) by S & F new table top in one piece made out of 18/19mm thick prelaminated particle board exterior grade confirming to IS including teak wood edging 6 mm thick made out of well seasoned teak wood free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed .

M & L for removing unsv top long rail of Table dining 4 persons, 1200 x 900 mm (Drg No. FD/MAP-II/03) by S & F new top long rail made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv top short rail of Table dining 4 persons, 1200 x 900 mm (Drg No. FD/MAP-II/03) by S & F new top short rail made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv leg of Table dining 4 persons, 1200 x 900 mm (Drg No. FD/MAP-II/03) by S & F new leg out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv stiffener of Table dining 4 persons, 1200 x 900 mm (Drg No. FD/MAP-II/03) by S & F new stiffener out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv hard rubber shoe of Table dining 4 persons, 1200 x 900 mm (Drg No. FD/MAP-II/03) by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

Preparation of old decorated / new replaced parts /surface of Table dining 4 persons, 1200 x 900 mm (Drg No. FD/MAP-II/03) smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

M & L for removing unsv top of Table dining 4 persons (Drg No. MEC 178, MEC 179) by S & F new table top in one piece made out of 18/19mm thick plywood commercial BWP grade ISI marked fixed with 1.5 mm decorative lamination of required shade including teak wood edging made out of 1 st class well seasoned teak wood free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as shown on drawing and as directed .

M & L for removing unsv top long rail of Table dining 4 persons (Drg No. MEC 178, MEC 179) by S & F new top long rail made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv leg of Table dining 4 persons (Drg No. MEC 178, MEC 179) by S & F new leg out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv hard rubber shoe of Table dining 4 persons (Drg No. MEC 178, MEC 179) by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

Preparation of old decorated / new replaced parts /surface of Table dining 4 persons (Drg No. MEC 178, MEC 179) smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

M & L for removing unsv top of Table dining, 1200 x 900 mm (Drg No. FD-273) by S & F new table top in one piece made out of 18/19mm thick prelaminated particle board exterior grade confirming to IS including teak wood edging 6 mm thick made out of well seasoned teak wood free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed .

M & L for removing unsv top long rail of Table dining, 1200 x 900 mm (Drg No. FD-273) by S & F new top long rail made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv top short rail of Table dining, 1200 x 900 mm (Drg No. FD-273) by S & F new top short rail made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv leg of Table dining, 1200 x 900 mm (Drg No. FD-273) by S & F new leg out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv stiffener of Table dining, 1200 x 900 mm (Drg No. FD-273) by S & F new stiffener out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv hard rubber shoe of Table dining, 1200 x 900 mm (Drg No. FD-273) by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

Preparation of old decorated / new replaced parts /surface of Table dining, 1200 x 900 mm (Drg No. FD-273) smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

M & L for removing unsv top of Table peg (Drg No. C3/MEC/SP/202/MO/14) by S & F new table top in one piece made out of 18/19 mm thick plywood commercial BWP grade ISI marked fixed with 1.5 mm thick decorative lamination including well seasoned teak wood edging 6 mm thick free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed and as shown on drawing.

M & L for removing unsv top long rail of Table peg (Drg No. C3/MEC/SP/202/MO/14) by S & F new top long rail made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv top short rail of Table peg (Drg No. C3/MEC/SP/202/MO/14) by S & F new top short rail made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv leg of Table peg (Drg No. C3/MEC/SP/202/MO/14) by S & F new leg out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv hard rubber shoe of Table peg (Drg No. C3/MEC/SP/202/MO/14) by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

Preparation of old decorated / new replaced parts /surface of table peg (Drg No. C3/MEC/SP/202/MO/14) smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

M & L for removing unsv top of Table peg (Drg No. FD-384) by S & F new table top in one piece made out of 18/19 mm thick plywood commercial BWP grade ISI marked fixed with 1.5 mm thick decorative lamination including well seasoned teak wood edging 6 mm thick free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed and as shown on drawing.

M & L for removing unsv top long rail of Table peg (Drg No. FD-384) by S & F new top long rail made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv leg of Table peg (Drg No. FD-384) by S & F new leg made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv stiffener of Table peg (Drg No. FD-384) by S & F new stiffener out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv hard rubber shoe of Table peg (Drg No. FD-384) by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

Preparation of old decorated / new replaced parts /surface of Table peg (Drg No. FD-384), smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

M & L for removing unsv top of Table with drawer, 90 x 60 x 76 cm (Drg No. FD-283) by S & F new top made out of 18/19 mm thick pre laminated particle board one side white and other side decorative choise lamination exterior grade including well seasoned teak wood edging free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed and as shown on drawing.

M & L for removing unsv top long rail of Table with drawer, 90 x 60 x 76 cm (Drg No. FD-283) by S & F new top long rail made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv top short rail of Table with drawer, 90 x 60 x 76 cm (Drg No. FD-283) by S & F new top short rail made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv hard rubber shoe of Table with drawer, 90 x 60 x 76 cm (Drg No. FD-283) by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

M & L for removing unsv CP knob of Table with drawer, 90 x 60 x 76 cm (Drg No. FD-283) by S & F new CP knob of superior quality as per sample approved all as directed.

M & L for removing unsv leg of Table with drawer, 90 x 60 x 76 cm (Drg No. FD-283) by S & F new leg out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv stiffener of Table with drawer, 90 x 60 x 76 cm (Drg No. FD-283) by S & F new stiffener made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv drawer of Table with drawer, 90 x 60 x 76 cm (Drg No. FD-283) by S & F new drawer including CP knob of superior quality all as shown on drawing and as specified.

Preparation of old decorated / new replaced parts /surface of table with drawer 90x60x76cm (Drg No. FD-283) smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

M & L for removing unsv top of Table writing (Drg No. FD-275) by S & F new top made out of 18/19 mm thick pre laminated particle board one side white and other side decorative choise lamination exterior grade including well seasoned teak wood edging free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed and as shown on drawing.

M & L for removing unsv door shutter of Table writing (Drg No. FD-275) by S & F door shutter made out of 18/19 mm thick pre laminated particle board exterior grade ISI marked of required shade including well seasoned teak wood edging 4 mm thick free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed and as shown on drawing.

M & L for removing unsv hinges of Table writing (Drg No. FD-275) by S & F new CP piano type hinges of superior all as shown on drawing.

M & L for removing unsv top long rail of Table writing (Drg No. FD-275) by S & F new top long rail made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv top short rail of Table writing (Drg No. FD-275) by S & F new top short rail made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv stiffener of Table writing (Drg No. FD-275) by S & F new stiffener made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv hard rubber shoe of Table writing (Drg No. FD-275) by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

M & L for removing unsv CP knob/Handle of table writing (FD-275) by S & F new Handle SS 75mm of superior quality as per sample approved and all as directed.

M & L for removing unsv leg of Table writing (Drg No. FD-275) by S & F new leg out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv drawer of table writing (FD-275) by S & F new drawer including Handle SS 75mm (as per sample) of superior quality all as shown on drawing and as directed.

Preparation of old decorated / new replaced parts /surface of table writing (FD-275) smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

M & L for removing unsv top of Table with drawer, 90 x 60 x 76 cm (Drg No. MEC 2919) by S & F new table top in one piece made out of 18/19 mm thick plywood commercial BWP grade ISI marked duly fixed with 1.5 mm thick decorative lamination of required shade including well seasoned teak wood edging 6 mm thick free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed and as shown on drawing.

M & L for removing unsv top long rail of Table with drawer, 90 x 60 x 76 cm (Drg No. MEC 2919) by S & F new top long rail made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv top short rail of Table with drawer, 90 x 60 x 76 cm (Drg No. MEC 2919) by S & F new top short rail made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv hard rubber shoe of Table with drawer, 90 x 60 x 76 cm (Drg No. MEC 2919) by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

M & L for removing unsv CP knob/Handle of Table with drawer, 90 x 60 x 76 cm (Drg No. MEC 2919) by S & F new Handle SS 75mm of superior quality as per sample approved all as directed.

M & L for removing unsv leg of Table with drawer, 90 x 60 x 76 cm (Drg No. MEC 2919) by S & F new leg made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv drawer of Table with drawer, 90 x 60 x 76 cm (Drg No. MEC 2919) by S & F new drawer including Handle SS 75mm (as per sample) of superior quality all as shown on drawing and as specified.

M & L for removing unsv back ply of Table with drawer, 90 x 60 x 76 cm (Drg No. MEC 2919) by S & F new back ply in one piece made out of 6 mm mm thick plywood commercial BWP grade ISI marked all as specified and as shown on drawing.

Preparation of old decorated / new replaced parts /surface of Table with drawer, 90 x 60 x 76 cm (Drg No. MEC 2919) smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

M & L for removing unsv top of Table with drawer, 90 x 60 x 76 cm (Drg No. MEC 176) by S & F new table top in one piece made out of 18/19 mm thick plywood commercial BWP grade ISI marked duly fixed with 1.5 mm thick decorative lamination of required shade including well seasoned teak wood edging 6 mm thick free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed and as shown on drawing.

M & L for removing unsv top long rail of Table with drawer, 90 x 60 x 76 cm (Drg No. MEC 176) by S & F new top long rail made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv top short rail of Table with drawer, 90 x 60 x 76 cm (Drg No. MEC 176) by S & F new top short rail made out of 1 st class well seasoned teak wood free from cracks and knotes all as shown on drawing.

M & L for removing unsv leg of Table with drawer, 90 x 60 x 76 cm (Drg No. MEC 176) by S & F new leg out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv CP knob/Handle from Table with drawer, 90 x 60 x 76 cm (Drg No. MEC 176) by S & F new Handle SS 75mm of superior quality as per sample approved all as shown on drawing and as specified.

M & L for removing unsv stiffener of Table with drawer, 90 x 60 x 76 cm (Drg No. MEC 176) by S & F new stiffener made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv hinges of shutter of Table with drawer, 90 x 60 x 76 cm (Drg No. MEC 176) by S & F new CP piano type hinges of superior quality as per sample approved all as directed.

M & L for removing unsv hard rubber shoe of Table with drawer, 90 x 60 x 76 cm (Drg No. MEC 176) by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

M & L for removing unsv back ply of Table with drawer, 90 x 60 x 76 cm (Drg No. MEC 176) by S & F new back ply in one piece made out of 6 mm thick plywood commercial BWP grade ISI marked all as shown on drawing.

Preparation of old decorated / new replaced parts /surface of Table with drawer, 90 x 60 x 76 cm (Drg No. MEC 176) smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

M&L for removing of unsv old mirror alongwith unsv back plywood and frame of Table dressing gents (Drg No. MEC 173) by S & F new sheet glass electro-copper plated mirror 5mm thick of indlidung 6 mm thick back plywood commercial BWP grade ISI marked and frame made from first class teak wood duly french polished complete all as specified and shown on drg.

M & L for removing unsv back mirror plywood of Table dressing gents (Drg No. MEC 173) by S & F new back made out of 6 mm thick commercial plywood BWP grade ISI marked as as shown on drawing.

M & L for removing unsv frame of Table dressing gents (Drg No. MEC 173) by S & F new frame made out of 1st class well seasoned teak wood free from crackes and knots all as specified and as shown on drawing.

M & L for removing unsv beading from mirror of Table dressing gents (Drg No. MEC 173) by S & F new beading made out of 1st class well seasoned teak wood free from crackes and knots all as specified and as shown on drawing.

M&L for removing of unsv old looking mirror of Table dressing gents (Drg No. MEC 173) by S & F new sheet glass electro-copper plated mirror 5 mm thick all as specified and as shown on drawing.

M & L for removing unsv drawer of Table dressing gents (Drg No. MEC 173) by S & F new drawer made out of 12 mm thick commercial plywood BWP grade including CP knob of superior quality all as per shown on drawing and as specified.

M & L for removing unsv sliding glass of Table dressing gents (Drg No. MEC 173) by S & F new plain glass 5 mm thick of superior quality all as per shown on drawing and as specified.

M & L for removing unsv CP knob/Handle of Table dressing gents (Drg No. MEC 173) by S & F new Handle SS 75mm of superior quality as per sample approved all as directed.

M&L for removing of unsv complete drawer assymbely of Table dressing gents (Drg No. MEC 173) by S & F new drawer assymbely made out of 18/19 mm thick commercial plywood BWP grade fixed with 1.5 mm thick decorative lamination all around the outer side including 02 Nos new drawer with CP knob of superior quality and 5 mm thick plain sliding glass shall be provided all as shown on drawing and as directed.

Preparation of old decorated / new replaced parts /surface of Table dressing gents (Drg No. MEC 173) smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

M&L for removing of unsv mirror alongwith unsv back plywood and frame of Table dressing gents (Drg No. MEC C3/MEC/SP/203/MO/26) dressing gents by S & F new sheet glass electro-copper plated mirror 5 mm thick indlidung 6 mm thick back plywood commercial BWP grade complete all as specified and shown on drg.

M&L for removing of unsv old mirror of Table dressing gents (Drg No. MEC C3/MEC/SP/203/MO/26) by S & F new sheet glass electro-copper plated mirror 5 mm thick including all as specified and as shown on drawing.

M & L for removing unsv back plywood from mirror of Table dressing gents (Drg No. MEC C3/MEC/SP/203/MO/26) by S & F new back made out of 6 mm thick commercial plywood BWP grade ISI marked as as shown on drawing.

M&L for removing of unsv complete drawer assymbely of Table dressing gents (Drg No. MEC C3/MEC/SP/203/MO/26) by S & F new drawer assymbely made out of 18/19 mm thick commercial plywood BWP grade fixed with 1.5 mm thick decorative lamination all around the outer side including 06 Nos new drawer with CP knob of superior quality shall be provided all as shown on drawing.

M & L for removing unsv drawer Table dressing gents (Drg No. MEC C3/MEC/SP/203/MO/26) by S & F new drawer made out of 12 mm thick commercial plywood BWP grade including CP knob of superior quality all as per shown on drawing and as specified.

M & L for removing unsv CP knob/handle of Table dressing gents (Drg No. MEC C3/MEC/SP/203/MO/26) by S & F new Handle SS 75mm of superior quality as per sample approved all as directed.

Preparation of old decorated / new replaced parts /surface of table dressing gents (Drg No. MEC C3/MEC/SP/203/MO/26) smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

M&L for removing of unsv mirror of Dressing mirror gents (Drg No. FD/E6/MAP/16) by S & F new sheet glass electro-copper plated mirror 5mm thick all as shown on drawing.

M & L for removing unsv back plywood from Dressing mirror gents (Drg No. FD/E6/MAP/16) by S & F new back made out of 12 mm thick commercial plywood BWP grade ISI marked as as shown on drawing.

M & L for removing unsv back plywood of frame of Dressing mirror gents (Drg No. FD/E6/MAP/16) by S & F new back made out of 12 mm thick commercial plywood BWP grade ISI marked as as shown on drawing.

M & L for removing unsv glass shelves with glass holder of Dressing mirror gents (Drg No. FD/E6/MAP/16) by S & F new 5.5 mm thick plain glass of superior quality with glass holder all as specified and as directed.

M & L for removing unsv hinges of Dressing mirror gents (Drg No. FD/E6/MAP/16) by S & F new CP piano type hinges of superior quality all as shown on drawing and as specified.

M & L for removing unsv magnatic catcher of Dressing mirror gents (Drg No. FD/E6/MAP/16) by S & F new magnatic catcher of superior quality as per sample approved all as shown on drawing and as specified.

Preparation of old decorated / new replaced parts /surface of Dressing mirror gents (Drg No. FD/E6/MAP/16) smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

M & L for removing unsv top of Teapoy (Drg No. FD-382) by S & F new top made out of 18/19 mm thick pre laminated particle board one side white and other side decorative choise lamination exterior grade including well seasoned teak wood edging 4 mm thick free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed and as shown on drawing.

M & L for removing unsv top long rail of Teapoy (Drg No. FD-382) by S & F new top long rail made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv stiffener of Teapoy (Drg No. FD-382) by S & F new stiffener made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv leg of Teapoy (Drg No. FD-382) by S & F new leg out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv hard rubber shoe of Teapoy (Drg No. FD-382) by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

Preparation of old decorated / new replaced parts /surface of Teapoy (Drg No. FD-382) smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

M & L for removing unsv top of Teapoy (Drg No. C3/MEC/SP/202/MO/29) by S & F new top made out of 18/19 mm thick pre laminated particle board one side white and other side decorative choise lamination exterior grade including well seasoned teak wood edging 4 mm thick free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed and as shown on drawing.

M & L for removing unsv top long rail of Teapoy (Drg No. C3/MEC/SP/202/MO/29) by S & F new top long rail made out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv top short rail of Teapoy (Drg No. C3/MEC/SP/202/MO/29) by S & F new top short rail made out of 1 st class well seasoned teak wood free from cracks and knotes all as shown on drawing.

M & L for removing unsv leg of Teapoy (Drg No. C3/MEC/SP/202/MO/29) by S & F new leg out of 1st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv hard rubber shoe of Teapoy (Drg No. C3/MEC/SP/202/MO/29) by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

Preparation of old decorated / new replaced parts /surface of Teapoy (Drg No. C3/MEC/SP/202/MO/29) smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

M & L for removing unsv top of table centre(Drg No:FD 274) by S & F new table top in one piece made out of 18/19mm thick prelaminated MDF board of required shade exterior grade confirming to IS including teak wood edging 6 mm thick made out of 1 st class well seasoned teak wood free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as shown on drawing and as directed .

M & L for removing unsv long rail of table centre(Drg No:FD 274) by S & F new long rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv leg of table centre(Drg No:FD 274) by S & F new leg made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv stiffener of table centre(Drg No:FD 274) by S & F new stiffener made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv hard rubber shoe of table centre(Drg No:FD 274) by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

Preparation of old decorated / new replaced parts /surface oftable centre(Drg No:FD 274) smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

M & L for removing unsv glass top of table centre lounge (Drg No:C3/MEC/SP/204/02) by S & F new Glass top made out of 12 mm thick plain glass all as shown on drawing

M & L for removing unsv hard rubber shoe of table centre lounge (Drg No:C3/MEC/SP/204/02) by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

Preparation of old decorated / new replaced parts /surface of table centre (Drg No:C3/MEC/SP/204/02) smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

M & L for removing unsv glass top of table centre with glass top 2 tier (Drg No MEC 2911) by S & F new 8mm thick Black glass top all as shown on drawing.

M & L for removing unsv leg of table centre with glass top 2 tier (Drg No MEC 2911) by S & F new leg made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv stiffener long of table centre with glass top 2 tier (Drg No MEC 2911) by S & F new long stiffener made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv short stiffener of table centre with glass top 2 tier Drg No MEC 2911 by S & F new short stiffener made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv top short rail of table centre with glass top 2 tier Drg No MEC 2911 by S & F new top short rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv top long rail of table centre with glass top 2 tier Drg No MEC 2911 by S & F new top long rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv hard rubber shoe of table centre with glass top 2 tier Drg No MEC 2911 by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

Preparation of old decorated / new replaced parts /surface of table centre (Drg No MEC 2911) smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

M & L for removing unsv glass top of table centre (Drg No: C3/MEC/202/MO/24) by S & F new 8mm thick plain glass top all as shown on drawing.

M & L for removing unsv top of table centre(Drg No: C3/MEC/202/MO/24) by S & F new table top in one piece made out of 18/19mm thick prelaminated particle board exterior grade confirming to IS all as shown on drawing and as directed.

M & L for removing unsv leg of table centre(Drg No: C3/MEC/202/MO/24) by S & F new leg made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv centre long stiffener of table centre(Drg No: C3/MEC/202/MO/24) by S & F new centre long stiffener made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv side short stiffener of table centre(Drg No: C3/MEC/202/MO/24) by S & F new side short stiffener made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv top short rail of table centre(Drg No: C3/MEC/202/MO/24) by S & F new top short rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv top long rail of table centre(Drg No: C3/MEC/202/MO/24) by S & F new top long rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv hard rubber shoe of table centre(Drg No: C3/MEC/202/MO/24) by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

Preparation of old decorated / new replaced parts /surface of table centre (Drg No: C3/MEC/202/MO/24) smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

M & L for removing unsv top of table center (Drg No: MEC 177) by S & F new table top in one piece made out of 18/19mm thick plywood commercial BWP grade ISI marked fixed with 1.5 mm decorative lamination of required shade including teak wood edging 6 mm thick made out of 1 st class well seasoned teak wood free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as shown on drawing and as directed .

M & L for removing unsv long rail of table center (Drg No: MEC 177) by S & F new long rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv short rail of table center (Drg No: MEC 177) by S & F new short rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv leg of table center (Drg No: MEC 177) by S & F new leg made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv stiffener of table center (Drg No: MEC 177) by S & F new stiffener made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing.

M & L for removing unsv hard rubber shoe of table by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

Preparation of old decorated / new replaced parts /surface of table centre smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

M & L for removing unsv peg hook of Peg set of two, three, four and six (Drg No: C3/MEC/SP/205, MEC 2908, FD 80M, MEC 173, MEC 2908, MEC 182, MEC 192) by S & F new Aluminium (125x75mm) peg hook of superior quality with screw as per sample approved all as specified and as directed.

M & L for removing unsv key plate from Peg set of two, three, four and six (Drg No: C3/MEC/SP/205, MEC 2908, FD 80M, MEC 173, MEC 2908, MEC 182, MEC 192) by S & F new key plates (as per sample) to its existing position all as shown on drawing as approved by Engr-in-charge..

Preparation of old decorated / new replaced parts /surface of peg set of three Drg No: 3/MEC/SP/205,MEC 2908 smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

Preparation of old decorated / new replaced parts /surface of peg set of six Drg No: FD 80M MEC 173 MEC 2908 smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

Preparation of old decorated / new replaced parts /surface of peg set of two Drg No MEC 182 smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

Preparation of old decorated / new replaced parts /surface of peg set of four Drg No MEC 192 MEC 182 smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

SAIRAM INDUSTRIES

Yash enterprises

Rao Sales and service