WBPWD/AE/KMCESD/NIQ-63/25-26

Amount

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire ( make: KEI, Polycab , Gloster, Havells) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. Bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish. A) Average run 12 mtr. [2(g)/E-14]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire ( make: KEI, Polycab , Gloster, Havells) of the following sizes in the prelaid polythene pipe/PVC Rigid Conduit pipe and by the prelaid GI fish wire and making necy. connection as required [1 /E-9] (b)} A) 3 x 22/0.3 (1.5 sqmm)

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make]on wall, ceiling with saddles and other accessories as required and mending good damages to building works. [7 (a)/E-16] A) 20mm size

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment. (D9/11)

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections [18(a)/E-6]

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length as per G S (Vide page no C2 Item no 16 )

S & F fan down rod (14 SWG) incl. necessary connection wire (2X1.5sqmm cu wire) and painting the down rod as per direction of EIC as per market rate.

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991) [29/D-14].

Supply & Fixing Al louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) (D-14/32 - a) (a) 30 cm (12")

Supply and Fixing 4' long twin LED tube fittings ( make-- Philips TMC 502 2 X T - LED 22W / CG Eco- I IGP161LT8-16 2xT8 / Wipro WIO922208P) ) complete with all accessories with 2 x 18/20 Wt (Make- Crompton LT8-20-865-(2) ULTRON / Bajaj BLRB-DB-118) Led tube lamp corrosponding to (Make- PhilipsMAS LED Tube 18W, 2100lm 865 T8 (ve)/ Crompton LT8-20-865-(2)/ Wipro LL13-181-65SESL1-G1/ Bajaj BLRB 20W CW LED) suspended 25 cm bellow the ceiling with 2 no. 20 mm dia E.I conduit (14 SWG) supports fixed with 'L' type MS clampp whose one side fixed on ceiling with suitable size 4 nos. fastner and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit "L" type (125 mm x 125mm) 6mm thick and 25 mm with MS clamps and connecting the length of PVC insulated wire and mending good the damages to original finish and painting etc.

S & D 230V, 50 Hz 1420 RPM. 80 watt Heavy Duty 12" (30 cm) dia exhaust fan (Make -- EPC, Heavy duty).

S & D 230V, 50 Hz. 920 RPM 75 Watt Heavy Duty 15" (380mm) dia exhaust fan (Make -- EPC, Heavy duty).

S & D 230V, 1200mm sweep ceiling fan, air delivery 230 CMH, ( make-- Usha Striker 1 star/CG Hi speed (HS) 1 star/Orient Falcon-425 SHS) complete with blades, canopy, fork, rubber bush, down rod, 1000mm safety wire & S3 capacitor etc.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush, etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire as per G.S. (Vide page no C-3, Item no 21.a.)

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: (C4/28) a) 30 cm ( 12" )

Supply and Fixing of Digital time switch for AC Make L&T (GIC) cat no 67DDT0/ABB/Schneider on existing enclosure as per direction of EIC.

Special Terms and Conditions 1. It is stated that the above work place is existing COVID Hospital, In case of any mishap or accidental to any staff that deputed by the agency the whole responsibility is to be borne by the concern agency. 2. The Agency shall be responsible for provisioning of all COVID safety measures including regular sanitiziation of work places, vaccination of employees and compliance of stated directive and COVID appropriate norms. 3. All the issues related to the safety of the staffs should be taken care by the agency itself. (Defect Libilities period for 01 year from the date of completion of work) (Rate should be quotated including all taxes and duties)

S T ENTERPRISE (BID ID -6907961)

DIAMOND ELECTRIC SALE AND SERVICE (BID ID -6907988)