Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.2 LAccepted-AOC | L1 | Accepted-AOC Being lowest tender | |
| 2 | L2₹19.5 L+₹912.70 (0.05%)Rejected-Finance | L2 | Rejected-Finance Not being lowest tender | |
| 3 | L3₹20.7 L+₹1.2 L (6.35%)Rejected-Finance NAKA CHANDRA WADANI NAHARWALI MATA ROAD LASHKAR GWALIOR MP | GWALIOR | GWALIOR | MP | L3 | Rejected-Finance Not being lowest tender | |
| 4 | L4₹20.9 L+₹1.4 L (7.17%)Rejected-Finance | L4 | Rejected-Finance Not being lowest tender | |
| 5 | L5₹22.3 L+₹2.8 L (14.6%)Rejected-Finance WARD NO 20 BIRLA HOUSE JEDERUA KALA DISTT GWALIOR M P 474006 | GWALIOR | GWALIOR | MADHYA PRADESH | 474006 | L5 | Rejected-Finance Not being lowest tender |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
27 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF TA
GE AF TA GWL-474020
REPAIR/MAINT OF CERTAIN B/R WORKS SERVICES TO INSTALLATION IN TECH AREA AT AF STATION GWALIOR
2022_MES_526571_1
8900/1407/GWL/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF TA GWALIOR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE AF TA GWALIOR
₹50,000
Yes
18 Aug 2022
26 May 2022
5 Jul 2022
26 May 2022
27 Jun 2022
9 Jun 2022
60 days
Amount
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.
M&L for joint free coloured glazed ceramic tiles in vertical surface 450x300x7mm thick etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 10mm thick rendering cm 1:4 for back coat all as specified and as directed.
Demolition of cement concrete ( unreinforced) ground floors, pavings, tile of any description n. exc 15 cm thick below or above ground level and removing the demolished material to a distance exc 500 m but not exceeding 1.5 km and depositing where directed, complete all as specified and directed .
M & L for 25mm thick cement concrete type B-0. 1:2:4 (12.5mm graded aggregate) as in sub base all as specified and directed.
M & L for 75mm thick cement concrete type D-2, 1:4:8 using (40 mm graded aggregate) as in sub base all as specified and directed.
M&L for 20 mm thick screed bed or bedding in layer of mortar for laying floor finishes in cement plaster 1:6 complete all as specified and directed.
M&L for 15 mm thick screed bed or bedding in layer of mortar for laying floor finishes in cement plaster 1:4 complete all as specified and directed.
M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge.
S & F for Non-skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles all as specified and directed.
All as per item no. 9 here-in-before but as in skirting/dado including jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including 10mm thick cement plaster1:4 as backing coat complete all as specified and directed.
M&L for 75 mm thick plain cement concrete (1:3:6) type C2, using (40 mm graded stone aggregate) as in Plinth protection etc and finishing the surface even & fair complete all as specified and directed.
M&L for 100 mm thick plain cement concrete (1:2:4) type B2, using 40 mm graded stone aggregate as in pavings/hard standings and finishing cement concrete surface even & fair,laid in alternate panels complete all as specified and directed.
Forming contraction (Dummy) joints 65mm deepx10mm wide filled with sealing compound Grade 'B' all as specified and directed by Engr-in-Charge.
M&L for 12mm thick Endura designer tiles of size n.exc 0.16 Sqm any colour and shape with grey cement and pigment set, jointed and pointed on neat cement slurry as in floors complete all as specified and directed by Engr-in-Charge. Make - DUROTA/JOHNSON
M&L Machine pressed precast conctete interlocking paver block with grey cement and pigment glosy any shape and size of 60 mm thickness all as specified and directed. Make :- ISI Marked as approved by GE.
M&L for Sand filing under floors or in foundation including watering and consolidation
Dismantling of asbestos cement/ (corrugated or semi corrugated etc) sheet / galvalume sheet (any type ) in roof covering including ridges complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwss complete as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwss complete as specified and directed.
All as Item No 19 above but except sheet complete all as specified and directed.
S & F in repair 2mm thick pvc tiles/ sheets , liminated plain coloured ,marbled mosaic or mottled finish laid with approved rubber based adhesive in floors including all cutting and waste and work in all position complete all as specified and directed .
Demolition of brick work or stone boulders masonry built in cement mortor or cement lime mortor including all quoins arches pillars etc., but excluding ashlar facing dressed stone work and precast concrete articles, complete all as specified and directed.
M&L for brick work with sub class 'B' bricks , straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and directed.
All as per item No 23 herein before but except brick in CM 1:6 complete all as specified and directed.
Taking down cement plaster on brick surface or stone including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed .
M&L for 15mm thick rendering other than farir face of brick/stone masonry walls in CM 1:6 finished complete all as specified and directed.
M&L for 15mm thick rendering on fair face of brick/stone masonry walls in CM 1:4 finished complete all as specified and directed.
M&L for preparation of new plastered surfaces on walls of any height and apply two coats of oil bound distemper over one coat of primer with roller complete all as specified and directed.
M&L for preparation of new plastered surfaces on walls of any height and apply two coats of external emulsion paint (Make-Ace Paint of M/s Asian Paint or equivalent as approved by GE) white or tinted complete all as specified and directed.
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n. exc 1.5 Sqm each including iron mongories complete all as specified and directed.
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n'exc 4 Sqm each including iron mongories complete all as specified and directed.
S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc (minimum thickness of powder coating 50 micron) complete all as specified and directed by Engr-in-Charge.
S&F powder coated aluminium door shutters aluminium section weight 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws (Thickness of powder coating not less than 50 micron) etc complete all as specified and directed by Engr-in-Charge.
S&F powder coated aluminium window and ventilator shutters, side hung type without sash bar, aluminium sections weight 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws (Thickness of powder coating not less than 50 micron) etc complete all as specified and directed by Engr-in-Charge.
S&F 4mm thick aluminium composit panel of any colour fixed to door with necessary rubber gasket and aluminium snap beadings tint match with existing complete all as specified and directed by Engr-in-Charge.
S&F 5mm thick tinted glass fixed with necessary rubber gasket and aluminium snap beadings tint match with existing complete all as specified and directed.
S&F 4mm thick tinted glass fixed with necessary rubber gasket and aluminium snap beadings tint match with existing complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S Square tube, complete all as specified and directed.
S&F 100 mm long powder coated Aluminium tower bolt, tint existing to match complete all as specified and directed.
S&F 150 mm long powder coated Aluminium tower bolt, tint existing to match complete all as specified and directed.
S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F 150mm long Aluminium handles, cast type anodised, complete all as specified and directed.
S&F 100 mm long powder coated Aluminium handles, tint existing to match complete all as specified and directed.
S&F for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed and specified
S&F 75 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as directed and specified
S&F 125 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as directed and specified
S&F in repair cast iron body, door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.
S&F in repair double action floor spring hydaulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, govering pivot, other parts made of mild steel heavy duty complete all as specified and directed.
Dismantling mild steel work of any description not otherwise provided for complete all as specified and directed
M&L for Steel work in tubular trusses as in purlin, rafters, post etc including special shaped washer complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St-240 complete all as specified and as directed
M&L for MS work for wind tie in roofs and similar work including securing bolts, drilling hole etc confirming to Fe- 290 Gde E-165 complete all as specified and directed.
M&L for Preparing new steel and iron surface of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.
M&L for Preparing new steel and iron surface of any description n.exc over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.
M&L for Preparation of old surface of wall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of distemper oil emulsion white or tinted as approved complete all as specified and directed.
M&L for Preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for Preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for Preparing old decorated plastered or unplastered surfaces of walls and applying one coat of white wash complete all as specified and directed.
M&L for Preparing old decorated plastered or unplastered surfaces of external walls and applying one coat of exterior emulsion paint complete all as specified and directed [Make:-'Ace Paint' of M/s Asian Paints or equivalent in M/s Berger or M/s ICI as approved by GE].
Demolition of cement concrete (unreinforced of any escription other than ground floor and in any position not otherwise specifically provided for complete all as specified and directed.
Removal of existing roof treatment (screed plaster and tarfelt of any description) and removing to a distance exc. 500m and n.exc. 1.5 Km from site complete all as specified and directed
M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in benching, kerbs and levelling course etc over roof surface complete all as specified and as directed.
Supply only liquid water proofing compound complete all as specified and directed.
M&L for 10mm thick screed bed in cement mortar 1:4 mixed with using liquid water proofing compound as per manufacturers instructions (Note : Water proofing compound shall be measured and paid seperately under respective item of ''BOQ'') over roof top surface finished even and smooth using extra cement and application of water proofing treatment using APP modified roof membrane RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying bitumen primer @ 0.30 litre / Sqm manufactured by the same agency as that of APP membrane with a density 0.87-0.89 Kg per liter at 25 degree centigrade onprepared surface. (c) Applying hot blown grade bituminen 85/25 @ 1.2 Kg/Sq M over primer. (d) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gms/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap by authorized applicaators. (e) Applying a coat of bituminious aluminium Paint over APP Membrane.
M&L for providing cement concrete (1:2:4) Type B0 (using 20mm & 12.5mm graded stone aggregate) as in kerbs, haunching coping & flooring including necessary formwork rounded or chamfered angles all as directed.
S&F in repair for 4mm thick HPSC pre-prime non absestos fibre cement building board (E-classic) decorative finish fixed to existing GI/Aluminium grid at any position matching to existing complete all as specified and directed.
M/S NIRMAL SINGH DHANJAL
M/s JAY AMBEY CONSTRACTION .CO
m/s vikash Engineers
J.N.R. Engineers and Builders
vikas traders
M/s Subhash Construction Co.
Tara Mai Enterprises
M/S YOGANSH CONSTRUCTION CO.
M/S M.D. CONSTRUCTION .CO
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .