CERTAIN B/R REPAIR TO OTM AND MD ACCN AT AIR FORCE STATION BARWALA UNDER AGE (I) HIGHGROUND CHANDIGARH

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frame), not exceeding 1.5 Sqm each and removing from site as in Sch of credit and removal of debris outside MOD land, complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame), exceeding 1.5 sqm but not exceeding 4 sqm each and removing from site as in Sch of credit, and removal of debris outside MOD land, complete all as specified and directed.

Taking down shutters of any description not exceeding 1.00 Sqm each, from chowkhats/frames and removal to store for reuse or credit, complete all specified and directed

Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each, from chowkhats/frames and removal to store for reuse or credit, complete all specified and directed

Taking down wooden shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each, from chowkhats/frames and refixing in the same opening after necessary repair, easing and adusting, jointing replacement/refixing of mongries etc, complete all as specified and directed.

Resecuring or easing & adjusting without taking down Shutters of any description exceeding 1 sqm each and not exceeding 2 sqm complete all as specified and directed.

Supply and fixing factory made pressed steel frames for doors with two rebates, of size 125 mm x 60mm, made out of 1.25mm thick sheet, one shop coat primer and necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

Supply and fixing factory made pressed steel frames for doors with two rebates, of size 105 mm x 60mm, made out of 1.25mm thick sheet, one shop coat primer and necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

Supply and fixing, Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube, as per specification & drawing in SSR Part-II, in opening, complete all as specified and directed.

Supply and fixing flush shutters 35 mm thick, solid core constuction, with block board core and plywood face panels commercial face on both side complete all as specified and directed.

Supply and fixing second class hard wood 35 mm thick plain, glazed and skelton factory made shutters, open rebated and prepared divided into squares(04 Nos) with plain chamfered or rounded mitred and rebated sash bars any number, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutter as specified in SSR Part I, Section 8, Clause 8.24(a), kiln seasoned and chemically pressure treated , supplied and fitted to chowkats complete all as specified and and directed. Note:- Glass or Wire cloth in panels will be measured and paid separately.

Supply and fixing factory made solid PVC moulded door shutter with particle board core, 28 to 30 mm thick (stiles) with 2, 4, or 6 raised panel design with 2 mm thick Moulded prelaminated PVC sheet on the front face & 2 mm plain colour prelaminated PVC sheet on back face supplying and fixing in frame at site as shown in drawing in SSR complete all as specified & directed.

Supply and fixing in repair 25 mm thick block boards grade 1 quality, interior grade, commercial type as in shelves or doors of coupboards fixed with screw to timber frame work complete all as specified and directed.

Supply and fixing factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolt to each shutter, steel handle and without glazing bars, including flat iron 12x3mm for securing wire mesh, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing no CEAF/STD-185-2012 sheets 1/2 & 2/2.

Supply and fixing factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolt to each shutter, steel handle and with glazing bars, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing no CEAF/STD-185-2012 sheets 1/3 & 3/3.

Supply and fixing factory made box type steel section ventilator with top/centre hung shutter double leaf shutter for glazing and wire gauze with pintle hinges & 01 No 150mm mild steel tower bolt, hinges, steel peg stay, steel handle to each shutter, steel handle dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEAF/STD-186-2012 Sheets 1/1.

Supply and Fixing MS Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed.

Supply and Fixing, mild steel 300mm long, ordinary rat tail rod pattern MS door springs including roller and roller plate, complete all specified and directed.

Supply and Fixing in repairs, mild steel 300mm long, ordinary rat tail rod pattern MS door springs including roller and roller plate,with necessary welding etc complete all specified and directed.

Supply and fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed to steel frames with stainless steel tacks, or stainless steel wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and directed.

Supply and fixing in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed to steel frames with stainless steel tacks, or stainless steel wire staples, or fixed to wooden frames with first class hard wood bead, including replacement of damaged wooden bedding with and including two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Supply and fixing plain sheet glass 4 mm thick, ordinary quality, not exceeding 0.50 Sqm in each pane, and glazing with oil putty and securing pins, complete all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames, glazed with putty or fixed with wooden beads/ metal pins, complete all as specified and directed.

Supply and fixing butt hinges, medium weight, 100mm long, cold rolled mild steel , complete all as specified and directed.

Supply and fixing 140 mm door stopper of aluminium alloy body and tongue , anodised, with hard drawn steel spring fixed in door, complete all as specified and directed.

Supply and fixing in repairs, 140 mm door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in door, complete all as specified and directed.

Supply and fixing Hasp and staple of size 100mm, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, with width of flaps 30 mm when open, bright finish or electrogalvanised complete all as specified and directed.

Supply and fixing in repairs Hasp and staple of size 100mm, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fixing, 125 mm long, extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and directed.

Supply and fixing, in repairs 125 mm long, extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and directed.

Supply and fixing 150 mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specified and directed.

Supply and fixing in repairs 150 mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specified and directed.

Supply and fixing Aluminium alloy, anodised, sliding door bolts 250 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 12mm dia, complete all as specified and directed.

Supply and fixing in repairs, Aluminium alloy, anodised, sliding door bolts 250 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 12mm dia, complete all as specified and directed.

Supply and fixing Door seal strip with plastic beading, complete all as specified and directed.

Material and labour applying two coats of synthetic enamel paint over and including a coat of pink primer, on new wooden surfaces over 10cm width or girth, including preparation of wooden surface, complete all as specified and directed.

Material and labour, applying two coats of synthetic enamel paint over and including a coat of red oxide primer, on new steel surfaces over 10cm width or girth, including preparation of steel surface, complete all as specified and directed.

Supply and fixing, in repair curtain rod of stainless steel 25 mm dia, any shade, including a set of fixing brackets, for span not exceeding 2m, fixed to wall in repairs, with steel finols/finnels, connected accessories, required screws and steel rawal plugs as required complete all as specified and as directed.

Welding in repairs not exceeding 2.5 cm in length (thickness of metal to be welded not exceeding 6 mm), for maintenance of steel items such as gates, grills, doors, windows etc, including cleaning and preparing surfaces and holding the members in true position, complete all as specified and directed.

Demolition of brick masonry work built in cement mortar including all quoins, arches, pillars, staging etc and removal of rubbish outside MOD land, complete all as specified and directed.

Material and labour for brickwork with using subclass 'B' old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), complete all as specified and directed.

Material and labour for brickwork with using subclass 'B' old size bricks, straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:6), complete all as specified and directed.

Material and labour, brickwork with using retrieved subclass 'B' old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), except bricks, complete all as specified and directed. Note : Old serviceable bricks retrieved from demolition vide srl item No 41 here-in-before shall be reused after proper cleaning & washing etc.

Taking down cement plaster on brick or stone walls or concrete surfaces, etc, any description including raking out joints, hacking for key, scrubbing down with water, etc and removal of rubbish outside MoD land, complete all as specified and directed.

Material and Labour for rendering 15mm thick in cement mortar 1:4 as on brick walls finished the surface even & smooth w/o using extra cement all as specified.

Material and Labour for preparation and applying two coats of cement base paint on newly plastered surfaces of walls complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:6), on brick/concrete surfaces of walls, finished even smooth without using extra cement, complete all as specified and directed.

Material and Labour for preparation of new decorated plastered surfaces of walls by applying two coat of oil bound distemper (Ist quality) with a coat of primer, complete all as specified and directed.

Demolition of cement concrete ( unreinforced) in ground floors and pavings n. exe 15 cm thickness (below or above ground level ) including removal of debries out of defence land complete all as specified and directed.

Material and labour for PCC 1:2:4, Type B-1 using 40 mm graded stone aggregates as in plinth protections 50 mm thick, finished even and smooth w/o using extra cement with joints 10 mm wide and in full depth at corners and @ 3 m c/c filled with mastic mortar complete all as specified and directed.

Material and labour for 40 mm thick, PCC 1:2:4, Type B-1 using 20 mm graded stone aggregates finished even and smooth using extra cement complete all as specified and directed.

Material and Labour for PCC floors /hardstanding , laid in bays type B-2, 1:2:4 mix 75mm thick finished even and rough using spike rolling to surfaces or making impressions of expanded metal, whilst concrete is greeen including necessary formwork complete all as specified and as directed.

Material and Labour for forming construction joints 30mm deep & 10mm wide filled with sealing compound grade- 'A' all as specified and as directed.

Supply & fix glass dividing strips of 3 mm thick and 38 mm wide complete all as specified and directed by eng-in-charge.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including removal of debries out of defence land, including preparation of dismantled surface area to receive backing coat/bedding layer for tiles, complete all as specified and directed.

Material and labour for First quality, glazed designer pattern, jointed ceramic coloured tiles, 6-7mm thick, of size 450mm x 350mm or 450mm x 300 mm fixed in pattern as directed (combination of dark/light colour with border), on vertical surface such as in skirting, dados, risers to steps or walls, etc., set and jointed in neat cement slurry @ 3Kg/Sqm, and including pointing in white cement mixed with pigment or coloured cement to match the shade of tiles, over and including 10 mm thick rendering in CM (1:3),complete all as specified and directed.

Material and labour for first quality Non Skid joint free ceramic coloured tiles 7 to 8mm thick, (square/rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18Sqm, as in floors etc, set and jointed in neat cement slurry @ 3Kg/Sqm and pointed in white cement mixed with pigment or coloured cement to match the shade of tiles, over and including 15mm thick screed bed/bedding layer in CM (1:4), complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar and removing rubbish outside defence land complete all as specified and directed.

Material and labour for 16-18mm thick Granite (of any type) work, machine cut, (table rubbed and polished) as on cooking platforms, counter-slabs, window cills, steps and like, set in neat grey cement slurry @3Kg/Sqm, laid over and including 15mm thick bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including cutting for counter WHB, moulding the corners/edges and making holes for cooking gas, grinding & polishing, complete all as specified and directed.

Material and Labour for Machine cut Kota stone slab, 15mm to 20 mm thick as in flooring, laid over and including cement screed bed 15mm thick in cement mortar (1:4), and jointed with grey cement slurry mixed with pigment to match the shade of the slab including, rubbing and polishing (granite finish polish) complete, all as specified & directed.

Supply and fixing/hoisting in repair, rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed top), 500 litres capacity ‘Triple layered’, hoisted and fixed in position including inlet, outlet and drain pipe with plug, complete all as specified and directed.

Supply and fixing/hoisting in repair, rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed top), 1000 litres capacity ‘Triple layered’, hoisted and fixed in position including inlet, outlet and drain pipe with plug, complete all as specified and directed.

Supply and fixing in repair 20 mm bore Gun metal, globe or gate valve,with iron wheel head, screwed both ends for iron pipes complete as specified and directed.

Taking up or down existing steel water tubing and connections, 15mm bore for re-fixing or removing from site to store for reuse or credit, including taking down standard fittings, complete all as specified and directed.

Taking up or down existing steel water tubing and connections, 20 mm bore for re-fixing or removing from site to store for reuse or credit, including taking down standard fittings, complete all as specified and directed.

Fixing only, old steel water tubing, 15mm bore pipe, with all fitings in new or old position (walls, ceiling, floors etc), complete all as specified and directed. Note : Old steel tubing shall be fixed after proper checking, cleaning washing, bleaching etc.

Fixing only, old steel water tubing, 20 mm bore pipe, with all fitings in new or old position (walls, ceiling, floors etc), complete all as specified and directed. Note : Old steel tubing shall be fixed after proper checking, cleaning washing, bleaching etc.

Supply and fixing galvanized steel water tubes, 15mm bore, medium grade, with all standard fittings such as bends, elbows, tees etc, concealed/on surface, fixed to walls and ceiling or laid in floors, complete all as specified and directed. Note : Cutting chases as required shall be measured and paid separately.

Supply and fixing galvanized steel water tubes, 20mm bore, medium grade, with all standard fittings such as bends, elbows, tees etc, concealed/on surface, fixed to walls and ceiling or laid in floors, complete all as specified and directed. Note : Cutting chases as required shall be measured and paid separately.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth

Supply and Fixing in repairs 100mm diameter Cast Iron ‘P’ or ‘S’ trap complete all as specified and directed.

Supply and fixing in repairs PVC connection 15 mm size of length 600 mm with PTMT nuts, complete all as specified and directed.

Supply and fixing in repairs Vitreous china wash hand basin, coloured, flat back, size 550mm x 400mm, including brackets and cutting for and pinning in ends of brackets or erecting stand, complete including waste coupling of PTMT (half or full threaded) (Minimum weight 32-45 gms), PVC waste pipe, brackets , complete all as specified and directed.

Supply and Fix in repair Vitreous China urinals, half stall type (back or corner wall type) of size 420mmx395mmx635mm of white colour including CP brass coupling, PVC flexible discharge pipe, chromium plated water spreader for fixing with 15 mm dia pipe, connection pipe and discharge down pipe complete against wall in CM 1:2 and pointing around urinal back in cement complete all as specified and directed.

Supply and fixing in repair Vitreous China wash down water closet pan (pedestal pattern), coloured (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, Pedestal pan and trap also including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc, seat and cover for pedestal pan taking down old and removal of debris outside MOD land, complete all as specified and directed.

Supply and fixing vitreous china wash down water closet squatt pan, Indian type (Orissa pattern), of size 580mmx440mm, white with integral foot rests (excluding flushing cistern and flushing pipe but including CI ‘P’/’S’ trap), set in & jointed with appropriate adhesive/mortar including embedding in concrete and taking down old and removal of debris outside MOD land, complete all as specified and directed.

Supply and fixing 10 litre capacity virgin polypropylene (PVC) low level flushing cistern, ISI marked, white or coloured, valve less symphonic action type, with inlet, ball valve, float and handle, complete including PVC bend/ flush pipe, brackets and making all connections, fixed as in repairs and removal of old from site to store for reuse or credit, complete all as specified and directed.

Supply and fixing in repairs bib taps, cast copper alloy, with crutch or butterfly handle, chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm bore dia, including removal of old to store for reuse or for credit, complete all as specified and directed.

Supply and fixing in repairs pillar tap, cast copper alloy, chromium plated, fancy type, with capstan head, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shank and fly nuts, screwed for iron pipe 15mm bore dia, complete all as specified and directed.

Supply and fixing in repairs angle stop valve, cast copper alloy, with crutch or butterfly handle, chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm bore dia, including removal of old to store for reuse or for credit, complete all as specified and directed.

Supply and Fixing in repairs Brass chromium plated shower rose 125 mm size with or without swivel joints, fancy type with CP arm concealed type with CP cup including fixing to steel pipe or union 15mm bore complete all as specified and directed.

Supply and Fixing in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, wast pipe, washers and wastes; including beding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each washers, including cantilever cast iron brackets, connecting union etc, overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and Fixing, in repairs urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

Supply and Fixing, as in repairs grating doom PTMT 125mm dia with waste hole (minimum weight 25 gms) including jointing to waste pipe complete all as specified and directed.

Supply & fixing only in repair flush pipes, 32 mm dia for high level cistern to squatt pattern closet including all joints and making good to the floor complete all as specified and directed.

Supply and Fixing in repairs Waste coupling of PTMT 32 mm bore dia (half or full threaded) (Minimum weight 32mm-45gms) complete all as specified and directed.

Supply and Fixing in repairs, stainless steel kitchen sink waste coupling with rubber washer, design and pattern as per existing waste couplings with and including 32mm PVC waste pipe heavy duty complete all as specified and directed.

Supply and fixing in repairs flexible 32 mm size PVC waste pipe for Sink/ WHB complete all as specified and directed

Preparation of old plastered or unplastered surfaces of wall by brooming down with steel brushing, scraping down smoke spot, moulds, moss and efflorescent salts trading oil greasy spot etc, rubbing down and stopping of surface using sand paper and applying one coat of oil bound distemper on wall , complete all as specified and directed.

Preparation of old plastered/unplastered surfaces of ceiling and brooming down with steel wire brushing, scraping down smoke spots, moss and efflorescent salts, trading oil and greasy spots etc including washing, rubbing down and stopping of surfaces using sand paper and applying one coats of white wash, complete all as specified and directed.

Demolition wall/ ceiling boards (fibre pulm, insulation etc )or insulation board/slabs/blanket, any thickness including cover fillets complete all as specified and directed.

Supply and fixing 600 mm x 600 mm x 16 mm mineral fibre ceiling tiles, seamless,fixed on exposed grid system, including anodised aluminium snap grid frame work for false ceiling and hangers 6 mm dia GI (upto 1200 mm length) with level adjusting mechanism, fixed to roof slabs by means of ceilling cleats made out of GI flat 40 mm x 3 mm, 60 mm long and expansion hold fasteners 12.5 mm dia 40mm long complete all as specified and directed.

Ditto-all as per item No. 94 but refixing on existing snap grid framework of any description, complete as specified and directed.

Taking down existing aluminium doors/windows of size exc 1.5 sqm and re-fixing after tightening loose screw including replacement of unserviceable screw complete all as specified and directed.

Supply and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions.

Material & labour 9 mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed in aluminium framework with rubber beading complete all as specified and directed.

Supply and fix 5.5 mm thick tinted Sheet glass, ordinary quality and in aluminium doors & windows with rubber packing in square n exc 0.5 sq. m in each pane complete all as specified and directed.

Supply and fix double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

Supply & fixing aluminium 4 lever mortice lock 100 mm verticle type as directed and specified.

Material and labour for replacement of damaged aluminium beading of aluminium doors windows with new beading complete all as specified and directed.

Material and Labour for replacement of un-serviceable rubber packing of aluminium door & window including taking down carefully glass panels & re-fixing the same complete all as specified and directed.

Note: The total amount shall subject to adjustment of credit of Rs 29515.00 for old Materials as per Schedule of Credit

Satyadev Builders (BID ID -3493284)