Providing and laying lotus Fountain in Gapsagar Lake.

The buoyancy assembly platform of round shape minimum 8' feet dia at which the water jet system unit shall be placed. It should be made of non corrosive material and round shape have capacity to make the whole unit float in the lake. Made up by f reinforeced plastic work. The float should be made by Gelcoat, Surface Matt, And 2 layers of matt. The whole buoyancy assembly, sides should be Glossy and finished. The Supporting Accessories inside the floater Should be of SS 304. All the fixtures and Fitting on and Inside floater Should be of SS304. The Floater Should be Light in weight but the WCC of floatter should be Min. 400 Kgs floater height should be minimum 12" in height and at down side of assembly centre hole should be there for flench and motor Attachement.

Fixing of Lotus shape leaves in 3 step petal of lotus attached with ss structure all three step should have gap in between to set lights between leave petals, it which should look like orignal lotus and should be fixed on buoyancy assembly unit with complete ss structure for attachement. lotus Should not be less than 6 feet in dia. platform of lotus shape at which centre jet unit shall be placed. It should be made of non corrosive material. Made up by work. f reinforeced plastic The lotus should be made by Gelcoat, Surface Matt, And 2 layers of Fibreglass matt. The whole leaves of lotus should be Glossy and finished.

Supply And Fixing Joint system All Parts of Round Uncurler Should be made with Bottom Flench System to fited on the top of Booster and top Flench System for Nozzle. The work of Uncurler is attach floater and motor together and make it a single unit and to give strength to whole unit in water and during running of water

Poly Eurethene Foam Insulation work in 8 feet dia Floater with mixing of two different chemicals to form Foam, which is hard and provide strength to the hollow Floater. The PUF will be light in weight but provide strength after hardening.

providing and fixing SS Supporting and legs Means all the SS Heavy-duty tubular welded Stainless Steel frame design adds strength and longevity to fix all Pumps, Buster, Accessories, Luminaries etc. Legs will supports whole unit. The structure must setup in such a way that it can be used as the safety legs for whole fountain body to protect all installed fountain equipments under water when ever lake comes down

Providing and fixing round ring outside the lotus and between the lotus to give ligthing system for the lotus leaves, outer ring litghs will give focus on lotus live and it will be seen from far aslo. all ligths will be installed on ouside ring and between the buoyancy assembly

Providing and fixing round water ring with nozzels in it and connection with centre setup between the lotus from which water will flow between the lotus leaves from side of the buoyancy assembly

Heavy duty sky jet Emitter made of brass with provision for laminar flow of air over the exterior of nozzle to reduce turbulence and induce proper height of jet. Maximum height of water effect is 30 mts. Emitter should be Made up of Brass with required strength. The central Emitter allow to fountain water to a particular height. The pressure at which water is being pumped and hole of Emitter is deciding factor of the height

High Beam RGB LED 36 watt 12 volt Luminaries water proof lights. All external nuts, bolts and studs shall be rust proof. wiring shall be 4 core round insulated PVC flexible with copper conductors not less than 1.5 sqmm. Waterproof luminaries shall be water proof when fully immersed in water. All in pool connection shall be fully waterproof

High Beam RGB LED 9 watt 12 volt Luminaries water proof lights. All external nuts, bolts and studs shall be rust proof. wiring shall be 4 core round insulated PVC flexible with copper conductors not less than 1.5 sqmm. Waterproof luminaries shall be water proof when fully immersed in water. All in pool connection shall be fully waterproof