Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.8 LAccepted-AOC 153 TRANSPORT NAGAR KORBA CG 495677 | KORBA | KORBA | CHHATTISGARH | 495677 | ₹22.8 L | L1 | Accepted-AOC Technically and financially eligible L1 Bidder |
| 2 | L2₹23.3 L+₹53,655.57 (2.36%)Rejected-Finance | ₹23.3 L+₹53,655.57 (2.36%) | L2 | Rejected-Finance Not L1 Bidder |
| 3 | L3₹28.9 L+₹6.2 L (27.0%)Rejected-Finance | ₹28.9 L+₹6.2 L (27.0%) | L3 | Rejected-Finance Not L1 Bidder |
Tender Value
₹27.3 L
EMD Value
₹34,100
Closing Date
13 May 2024, 5:00 pmClosed
STAFF OFFICER (CIVIL) KORBA AREA
Office of the General Manager, South Eastern Coalfields Limited, CIVIL DEPARTMENT, KORBA AREA KORBA- 495 677(CG), Mo-9425533108/ 7587390644
Providing, installation and commissioning of Firefighting system in Main hospital Korba at AHQ of Korba.
2024_SECL_307315_1
SECL/GM/KA/CIVIL/e/24-25/14 dt. 30.04.2024
Open Tender
Civil Works - Others
Item Rate
60 days
Office of the General Manager, Korba Area, SECL
As per NIT.
3 documents required · 3 mandatory
₹34,100
26 Sept 2024
2 May 2024
15 May 2024
3 May 2024
13 May 2024
3 May 2024
3 May 2024 - 6 May 2024
Amount
BOOSTER PUMP Down Corner pump including electrical starter panel for pump, pressure switch, cabling upto motor as per manufacturer specifications and automation.10 Flow : 900 LPM, Head : 35 mtr, RPM - 2900
Providing & fixing dial type (100 mm) pressure gauge with isolation ball valve suitable for working pressure of 300/350 PSI. Cost shall be inclusive of providing any short pieces, nipples, elbows etc as required.
Supplying and installing pressure switch with 12/15 mm isolation valve, G.I. nipple, elbow etc. in an approved manner.
Providing C.I. Non return valve (Union / Flanged connection) suitable for working pressure of 15 kg/sqm of size 100mm
Providing butterfly valve suitable for working ressure of 15 kg/sqm with flanges, nut bolts, gaskets and necessary pad locking arrangement complete required. 80MM
Providing butterfly valve suitable for working ressure of 15 kg/sqm with flanges, nut bolts, gaskets and necessary pad locking arrangement complete required. 100MM
Providing single acting air release valve with ball valve, flanges/ union for sprinkler/ wet riser system.
Providing swinging type First Aid hose reel rolled on red colour drum with 30 mts long and 20 mm dia heavy duty thermoplast water hose confirming to IS:12585, 20 mm dia stop cock, & nozzle of 6mm outlet with shut off valve confirming to IS 8090 - 1976 complete with MS socket for tap-off, drum and brackets for fixing on wall with anchor fastner, bolts & nuts conforming to IS:884-1969 complete as required.
Providing Hydrant valve suitable for with flanges, nut bolts, gaskets and necessary pad locking arrangement complete required.
Supply Double Door hose cabinet with hinged front door and lock made of 16G MS sheet of suitable size to accommodate the above in MS cabinet with glass door and supporting frame. The size of the box Inside & outside powder coated with approved colour
Cost of supply and Installation of ISI 903 marked Branch Pipe SS . Long Complete with Male & Female Coupling of 63 MM dia with Binding.
Providing 1nos 15mts long 63mm dia CP hose with gun metal male and female instantaneous coupling.
MS `B' class pipe (ERW Providing two coats of synthetic enamel paint of approved shade over a coat of primer over the cleaned surface which should be free from dust, dirt and rough substance etc. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc.100mm dia
MS `B' class pipe (ERW Providing two coats of synthetic enamel paint of approved shade over a coat of primer over the cleaned surface which should be free from dust, dirt and rough substance etc. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc.80mm dia
MS `B' class pipe (ERW Providing two coats of synthetic enamel paint of approved shade over a coat of primer over the cleaned surface which should be free from dust, dirt and rough substance etc. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc.50mm dia
MS `B' class pipe (ERW Providing two coats of synthetic enamel paint of approved shade over a coat of primer over the cleaned surface which should be free from dust, dirt and rough substance etc. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc.25mm dia
Control panel AUTOMATIC for the Booster pump with Star Delta connections from RYB, voltameter, ammeter, necessary ELCBS, MCBS etc with 14 SWG sheet control panel including armoured cable from pump ot the control panel, glands, connectors, water proof joints in cable if the joint required etc complete. + CABLE extra
Accessories and extra material (elbow, nut bolt, fastner, rod, tie, gaskit, clamp)
Providing and fixing nominal bore 15mm dia quartzoid bulb type sprinkler 68 Deg.C standard response Pendent type. with complete as per specifications.
Supplying and installing fire brigade Header (Siamese connections) of 100 mm dia
Providing and fixing of Fire alarm pannel 4 Zone
Providing and fixing of Fire Manual call point
Providing and fixing of Fire alarm Hooter
Providing and fixing of Smoke Detector with base
Providing and fixing of 2 core 1.5mm copper cable
Providing , Fixing, commissioning & installation of detector
Providing and fixing A, B, C stored pressure Fire Extinguishers complete with all accessories as per manufacturers specifications with initial fill. Capacity 4 Kg
Providing and fixing CO2 type Fire Extinguishers complete with all accessories as per manufacturers specifications with initial fill. Capacity 2 kg
Providing and fixing clean agent Fire Extinguishers complete with all accessories as per manufacturers specifications with initial fill. Capacity 2 kg
Providing and fixing of PVC Valve 80mm dia
Providing and fixing PVC Pipe 80mm dia
Providing and fixing Ball valve 50mm dia
Providing and making Shed with structural steel work and G.I. profile sheets of 0.5mm thick for installation of pump and motor
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 80 mm diameter : Class II
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand(zone-III) : 6 graded stone aggregate 40 mm nominal size).
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work 80 mm dia. nominal bore
Total impact of GST for the purpose of CTC
S.N ENGINEERING
Carex Fire And Safety Services
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_318530.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .