Street Light Work at Mansha Devi Ghat Chaupati

Amount

Levatto coloum light in 90 watt . Fitting is made of mild steel decorative pole of dia 100 mm enclosed by ie cast alluminium light fixture with anodized alluimiun reflector to genrate smooth indirect lighting effect pole is designeed with laser cut patteren that are covered inside with opeal diffuser proper silicon rubber gas kit is provider with weatheer protection pole colour tolereance 3 SCDM to avoied colour deviation. all the LED to be tasted LM-80 test method . nanno ceramic surface conversion resistance to corrosive enviroment . Luminaire primerly coated with epoxyresin an top coated with uvstabilized MRF pu paint and cured all esterior parts are made of stainless steel, fitting is coated with epoxy zinc phosphate primer and using environmentally stable pu paint light out put of spurce is more than 110 LM/ watt CRI >70 surge protection 4K operating volatage 140-270 V fitting is IV 66 wired with branded OSram amd equivalent ,make LED and fulham constant current driver. proper thermal mangment for longer lige of fixture. LEd buring off 50000 Hrs fitting is IP66 completed in all as pects with all accessories except foundation volts Note:- Design to be approved as per side incharge Make:- Surya , Bajaj, Phiips, Vak Lighting ( 3 Mtr)

Supply installation testing & Commissioning of ISO certified company made high mast lighting system (as per PLG 07 of ILP UK techinical report no 7 of ILE UK /IS:875 Part-1 – 2015// BSEN10025 /and IS:2062 )consisting of totally hot dip galvanised by single dipped method high mast, lantern carriage suitable for up to 12 nos luminaries with welded arm (excluding luminares), mast head frame assembly with full cover, including 1 No. LED 15 Watts aviation obstruction lights, double drum type self sustaining winch, integral power tool accesible from door with padlocking arrangement ( winch motor with control circuit) hot dipped galvanised heavy duty pipe lightening finial, S.S. ropes (AISI 316, 7 / 19 costruction ), EPR insulated PCP sheathed trailing cable, including outdoor type control panel for auto on / off, reverse / forward motor operation and CC foundation of M - 25 grade complete as required as per IS 456/IS 2911. The mast is constructed from mild steel plates (as per IS 5986 Gr. 510 ) cut and folded to form a polygonal section, telescopic jointed and welding as per BS 5135. ( See table P - 03 for specs.) Chapter E-18 Page 3 P.W.D. Rajasthan Electrical B.S.R. 2021 Chapter E-18 Code No. Description Unit Complete Rate OEM Must have Type test certificate for wind tunnel test for High mast fixtures. complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this 12.5 Mtr HM (in 2 section)

M/s Jitendra Electric Store

M/s Pathak Electrical

m/s Upadhyay Traders

M/s Pathak Electrical

m/s Upadhyay Traders

SHRI BAJRANG ELECTRICALS