SPECIAL REPAIRS TO COOK HOUSE AND DINING HALL INCLUDING CONNETED SEWAGE LINE ETC OF BLDG NO P-72 (A-3) AT 4/8 GR AND PROVN OF FLOOR KOTA STONE, DRAINAGE AND WASHING POINT AT P-416 TRG BN-I MEG AND C UNDER GE (NORTH) BANGALORE

Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises etc complete all as specified and as directed

Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface etc complete all as specified and as directed

M&L for Plain cement concrete (1:4:8) type D- 2 using 40mm graded stone aggregate as in 75 mm thick sub base of flooing etc complete all as specified and as directed

M&L for Plain cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregates as in 25 mm thick sub base to flooring etc complete all as specified and as directed

M&L for screed bed or bedding layer of 15mm thick cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

M&L for Hard stone coloured tiles of size 600mmX600mm, 15 to 16mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed

M&L for rendering 10 mm thick cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat of dado/skirting etc complete all as specified and as directed

M&L for Glazed ceramic coloured tiles 300X450X7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and and as directed

M&L for PCC (1:3:6) type C-1 using 20 mm graded stone aggregates as in 75 mm thick plinth protection etc, finished even and smooth including joints filling with sealing compound Grade "A" without using extra cement complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

Per Load

M&L for rendering 15 mm thick cement mortar (1:6) on fair faces of brick work or concrete wall surface finsihed even and smooth without using extra cement etc complete all as specified and as directed

S&F in repairs stainless steel soap dish holder with glass etc complete all as specified and as directed (Make Cat no BA-25G of Prayag of equlavent make of Cera)

M&L for Plain cement concrete (1:2:4) type B-0 using 12.50mm graded stone aggregate as in copings, parapets and railing upto 60cm height, leveling concrete for roof slab, kerbs, water troughs / chajjas and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork all as specified and as directed

Taking down existing roof treatment of any types including HP clay tiles etc along with cement plastering etc including removing of debries exc 1.50 Km etc complete all as specified and directed.

M&L for rendering 10 mm thick cement mortar (1:3) on fair faces of concrete roof surface mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed (Notes : WPC shall be measured and paid seperately )

Supply only liquid water proofing compound, ISI marked, complete all as specified and directed.

M&L for water proofing treatment over RCC roof surfaces with the following specification al as specified & directed :- (i) Removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth (ii) Compatible primer/bonding bitumen @ 0.40 Litr/Sqm (iii) Laying APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017, 3mm thick and weighing not less than 3.80kg/Sqm reinforced with non woven polyster/HMHDPE matt black finished over and torch applications of membrane with 75mm side overlap and 100mm end lap (iv) Applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sqm

M&L for cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in hold fast and filling in pressed steel chowkat including necessary formwork etc complete all as specified and as directed

S&F Flush shutter 35mm thick solid core construction with both face is covered with deco rative face veneer with lipping/frame to match, kiln seasoned and chemically pressure treated complete all as specified and as directed

Note for Item No 95 & 96 :- (i) The earth wire for the points in the same circuit can be looped from point to point. (ii) Earth wire shall be taken inside the conduit (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring (iv) Cost of a circuit of any length of cable from DB to any switch/ socket board to be included in point wiring. (v) Cutting /chasing of wall for concealing conduit is deemed to be included in quoted rate

S & F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete as sepecified and directed (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F Factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed.

M&L for Precast cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregates as in landings, cover slabs for manholes etc. chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM (1:6) etc complete complete all as specified and as directed

Complete removal of existing treatment by means of wire brushing, sand paper, manually or mechanically up to visible of plastered surface including rubbing and washing etc complete all as specified and as directed

M&L for applying wall care putty 1mm thick on wall surface including finishing to the smooth surface etc complete all as specified and as directed

M&L for preparation of new Plastered ceiling surface and applying three coats of white wash etc complete all as specified as directed

M&L for Preparation of new plastered wall suface and applying two coats of distemper acrylic emulsion, white or tinted over a coat of primer complete all as specified and as directed

M&L for Preparation of old treated wall suface and applying one coat of distemper acrylic emulsion, white or tinted complete all as specified and as directed

M&L for preparation of new plastered surface of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm etc complete all as specified and as directed

M&L for complete removal of existing treatement of wooden surface of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed

Removing building materials etc.to a distance of exc 1.0 Km but not exc 1.50Km , beyond the lead included in the rates, including loading, unloading and stacking at the destination etc complete all as specified and as directed

S&F in repairs Stop cock / angle / Concealed cock PTMT fancy type any colour screwed for iron pipe 15mm dia bore and fixed etc complete all as specified and as directed

M & L for Machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing complete over & including screed bed 20mm thick cement mortar (1:6) complete all as specified and as directed.

Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, socket or power) complete including fittings such as switches ceiling roses, regulators, sockets light fittings, fans etc and making good the disturbed surface of walls, ceiling etc incl painting with same colour of the back ground complete all as specified and as directed.

M & L for Concealed Point Wiring with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded FRLS copper conductor conforming to IS 694 drawn through and including non-metalic rigid PVC conduit medium grade ISI marked with accessories concelaed type wiring including GI/ MS branded sunken boxes suitable for normal/modular concealed type in walls including plastic/heylam laminated sheet top cover 3 mm thick/modular frame and cover of suitable module fixed with cadmium plated iron screws for housing modular/normal type switches, switch socket outlets, fan regulators etc., including of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly all as specified and as directed for the following :-

One light / fan point controlled by one switch

M & L for Box type Steel Windows/Ventilators double side shutters (Windows side hung type , Ventilators top hung) pressed steel frames made out CRC Sheet of 80x60x1.25mm double rebated, Shutters box type made out of CRC Sheet of 40x20x1.0mm , windows & ventilator shutter fixed made of glass and gauge fixed with box type hinges, Aluminium die cast handles for glass shutters, Iron flat type handles for mesh shutters, Telescopic stays, etc complete all as specified incl 12mm square guard bars/grill welded with steel frame (100mmc/c horizontically) all as specified and directed. NOTE: (i) Quoted rate deemed to be included for steel frames, steel shutters and Guard bar/Grill, beading, fittings such as handles, hinges,Telescopic stays, locking arrangements and fixing of glass and wiremesh etc. (ii) 4 mm thick sheet glass and 0.36 mm dia stainless steel wire mesh be measured and paid separately. (Note : All Windows/Vent design as per CECZ TD drg No 539)

Supply and Fix Modular switch 1 way 6Amps,1 module all as specified and directed.

Supply and fix Modular type Fan step regulator, 120Watts - 2 module all as specified and directed.

Supply and fix Modular Socket, 6Amps - 2/3 pin combined, 2 module all as specified and directed.

Supply and fix Modular switch 1 way 16Amps, 1 module all as specified and directed.

M&L for Glazed ceramic coloured tiles 350X250X7mm / 450X350X7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match over & including backing coat 10 mm thick CM (1:4) etc complete all as specified and as directed

Per Point

Supply and fix Modular Socket 6A/16A - 2/3 pin universal combined 2 module all as specified and directed.

S&F in repairs MCB SPN 240 volts 32/40 Amps C curves complete all as specified and as directed

S&F in replacement of MCB Distribution board, SPN 8 way, double door type, 240 volts with 200 Amps rated busbar all as specified and as directed.

S&F in replacement of MCB Distribution board TPN 4 way, double door type, 240 volts with 200 Amps rated busbar as specified and as directed.

S&F in repairs MCB TPN 415 volts 10 KA 'C' curves 63 Amps complete all as specified and as directed

S&F in repairs MCB TPN 415 volts 10 KA 'C' curves, 100 Amps complete all as specified and as directed

S&F Ceiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals all as specified and as directed

S&F Wall mounted fans with accessories, 230Volts, SP, 400 mm Sweep with BEE 4 Star rating, fixing the fan on wall with necessary screws etc all as specified and as directed.

S&F Storage type water heater 25 Ltrs capacity, BEE 5 star rated including steel wired pipe for hot/cold water connection for inlet and out let water etc complete all as specified and directed at site .

M & L for Sub main with four runs of single core 6 Sqmm wiring 1100 volts grade multistranded FRLS copper conductors, along with two run of 6 Sqm PVC insulated single core multistranded copper conductor cable as earth continuity conductor run through & including suitable size of PVC conduit & taking down old existing wiring all as specified and as directed (Note : Six run of 6sqmm cable and one run of conduit altogether measured as one unit)

M & L for Sub main with four runs of single core 4 Sqmm 1100Volts grade multistranded FRLS copper conductors, along with two run of 4 Sqm PVC insulated single core multistranded copper conductor cable as earth continuity conductor run along with suitable size of PVC conduit & taking down old existing wiring all as specified and as directed (Note : Six run of 4sqmm cable and one run of conduit altogether measured as one unit)

M&L for Earthing with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2009 and as specified or indicated and testing on completion including earth work and excavation in any type of soil, PCC (1:3:6) type C1 chamber, pre cast RCC slab 40mm thick (1:2:4) type B1 with 8 mm dia TMT bars reinforced at 10 cm centre to centre both ways, funnel with G I medium grade watering pipe, wire mesh and lugs, test point including dismantaling old broken earthing complete all as specified and as directed

Supply and fixing in repairs LED bldg security light fitting 30 Watts with pressure die cast housing along with prismatic polycarbonate diffuser with IP 66 protection including and GI Bracket made out of GI tubing medium grade 25 mm bore , approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm , nuts, bolts, washers etc and including before fixing applying two coats of aluminum paint over a coat of red oxide primer including removing the old existing GI bracket complete all as specified and directed.

Supply and fix Exha