SE/T - 19/HIT Wing/KMDA of 2025-26

Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete.

a)In ground floor.

b) In First Floor

c) In Second Floor

Dismantling all types of masonry excepting cement concrete plain or reinforced,stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.

a) In ground floor including roof.

b) In First Floor including roof.

c) In Second Floor including roof.

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes.. a) Pakur Variety (i) In Ground floor

ii) In 1st Floor

iii) In 2nd Floor

v) In 4th Floor

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]

(ii) With 1:4 cement mortar, 20mm thk.

a) In Ground Floor including roof

b) In 1st Floor including roof

c) In 7th Floor including roof

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (a) One Coat i) Water based interior grade Acrylic Primer

a) In ground floor

b) In First Floor

c) In second Floor

e) In fourth Floor

f) In fifth Floor

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats

a) In ground floor

b) In First Floor

c) In second Floor

d) In 4th Floor

d) In 5th Floor

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading intotruck and cleaning the site in all respect as perdirection of Engineer in charge.

Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc. (a) With 'P' trap (with vent)

Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (b) Anglo Indian (ii) Plastic (hallow type) white

Supplying, fitting and fixing 10 litre porcelain low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internnal PVC fittings. White (ii) Plastic (hallow type) white

PTMT Pillar Cock - 15 mm. (Prayag or equivalent).

PTMT (Polytetra Bib Cock / Stop Cock) ( Prayag or equivalent) 15mm

Door stopper.(Brass)

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia 750 mm long

Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. 1050 mm long

Renewing hinged cleat with old hinge and new screws. Sal : Malayasian

A) Supplying Aluminium casted body hydraulic door closer as per I.S.I.

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. 100mm. X 75mm. X 3.50mm.

Supplying, fitting and fixing low-down cistern parts. A) Internal fittings for cistern complete of approved make.

Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz.window frame(top,bottom&side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS733-1983&IS1285-1975,annodised conforming to IS1868-1983, fitted with all other accessories viz.PVC roller,EPDM gasket,maruti lock, screwsetc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass(excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. For 2 Track window:Members for Bottom [email protected] per Mtr. and for Top and Side [email protected] per Mtr.and for shutter Bottom and Top [email protected] per Mtr.,Style side [email protected] per Mtr. and Inter lock member @ 0.612 Kg per Mtr. 10-12 Micron thickness Annodizing film Natural white

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. 5mm thick coloured / tinted / smoke glass.

Bailing out water by pump including all leads and lifts and including making all arrangements for disposal, where continuous flow or seepage of water is encountered and rating of pumps and hours of operation is specifically ascertained as per direction of the Engineer-in-charge.

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary…. On timber or plastered surface. Two coats (white in shade)

Cleaning and disinfecting upto 2000 litre Water Tank including masonry reservoir.

Cleaning E.P. or Anglo-Indian W.C. with acid.

Cleaning silt of inspection pit.

Louvered window

(i)Top, bottom and side member

(ii)Louvered Section

(iii)Cleat angle ( Non-annodized).

Cleaning rubbish, sludge, weeds scum, liquid earth, mud etc.etc.from road side masonary drain/ hume pipe drain/ culvert etc. by mathor labour after removing concrete.Slab/manhole cover etc.without damaging the same and refixing the same properly after cleaning as necessary and removing the sludge etc.etc.by using iron pans,buckets including all labour, tools & plants including removing the spoils in dry condition and disposing the same by truck beyond the road side in conformity with municipal/corporation rules for such disposal including loading into truck and cleaning the road side in all respects as per direction of the Engineerin-Charge. (Payment will be made on the basis of actual stack measurment of spoils in dry condition at roadside)

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 75mm UPVC pipe

(i) Double Socketed 1.8 Meter Length

(ii) Double Socketed 1.2 Meter Length

(iii) Coupler

(iv) Plain Tee

(v) Door Bend (LH) & (RH)

(vi) Bend 87.5º

(vii) Pipe Clip

Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6m height for external wall) 3 mm thick (weighing 7.4 kg/Sq.m)

Renewing worn out putty of glass panes : Panes not exceeding 0.2 Sq.m

Added:- @ 18% as GST

Added:- @ 1% as labour cess