SPECIAL REPAIR TO BLDG NO QTR NO. P-12/2/4, 15/A/2, P-11/1, 11/2, 3/2/1, P-3/2/2, P-3/2/3, P-3/24, 13A AND 13B AT KB ROAD

Amount

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.

Demolition of cement concrete of any description and any position not otherwise specially provided etc complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles.

M&L for brick work old size brick sub class 'B' bricks,straight or curved on plan exc 6 m mean radius,built in in CM (1:6) etc complete, all as directed.

M&L for Brickwork with sub class "B' old size brick straight or curved on plan to any radius in half brick thick built in cement mortar 1:4 etc complete, all as directed.

M&L for cement concrete type B1 1:2:4 (20 mm graded aggregate) as in span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work of walls, finished even & smooth (without using extra cement) etc all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair face of brick work of walls, mixed with liquid WPC as per manufacturer’s instructions, finished even & smooth(without using extra cement) incl mouldings, chamfers, splay srounded or coved angles, beads,grooves and rebate upto 10 cm in width or 15 cm in girth. Note : Supply only water proofing compound shall be measured and paid for separately.

M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth (without using extra cement) complete, all as specified.

Supply only liquid water proofing compound, ISI Marked.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade over 1-2mmthick wall care putty complete all as specicified.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of alkali resistant primer of approved shade/tint complete all as specified.

M&L for preparation & complete removal of existing teatment from old plastered surfaces of wall & applying two coats of cement base paint over a coat of alkali primer of approved shade over a coat of primer complete all as specified.

M&L for preparation of newly plastered surfaces of ceiling & applying three coats of white wash, complete, all as specified.

M&L for preparation of old decorated plastered surfaces of ceilling and applying two coat of white washing on ceilling complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment by sraping with mechanical wall sander(having mechanical vacuum mechanism) having RPM not less than 1500,sanding pad of 80 Grit having dia of 7''/9'' to make the surface freee from dust,loose paint etc by skilled labour complete all as specified and directed.

M&L for preparation and complete removalof existing treatment from old plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over with 1-2 mm thick birla white care puty on wall etc complete all as specified & directed.

M&L for wateproof cement based putty@ 1 kg (undiluted) per sqm of average thickness 1 mm over plastered/old painted wall after scraping to prepare the surface even and smooth complete and sanding of the putty surface with with machenical wall sander (havin machenical vacum machanism) having RPM not less than 1500 sanding pad of 240 Grit or above to make the surface free from dust etc by skilled labour as per following steps:- Step1) Mix the putty powder by adding water as per manufacturer instruction and mix it with putty mixer with mixing capacity of min 2.5kg putty per minute. Step 2) Applying the first coat the prepared mixer with the help of fully authmatic airless spray machine of putty application having flow speed of max 6ltr per minute with a maximum pressure 3300 PSI. Step 3) Aloow 6-8 hrs time to dry the putty surface.

M&L for one coat to acrylic water based exterior grade pripmer @0.90ltr9undiluted)/10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application having an electric motor of min.1 HP with a flow speed of min 1 ltr per minute having pressure of 3300 PSI,allow 6-8 hrs to dry the surface for painting of subsequent coats as per manufactures instruction complete all as specified and as directed.

M&L for two coat water based premium acrylic smoothwater based exterioremulsion of approved colour with silicon additive & color stay Technology,Excellent dirt pick resistance with low VOC less than 50gram/ltr as per the LEEDS specifications,Anti allgal properties in two coats@ 1.79 ltr(undiluted)/10 sqm diluted with water as per manufacturer instruction applied with fully automatic airless spray machine of paint application a flow speed of min 1 ltr per minute having pressure of 3300 PSI,allow 6-8 hrs to dry the surface for painting of subsequent coats as per manufactures instruction complete all as specified and as directed.

M&L fo ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed.

M&L fo ATT Treatment of soil under existing floors using emulsion @ one litre per hole,300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as spd/directed by Engr-in-Charge.

M&L for Vitrified Ceramic tiles dark shad/double charge 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 20mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.

Ditto as above but on vertical surfaces dado/ skirting over 10mm thick plaster in CM 1:4 and incl taking down cement plaster etc complete all as specified. complete all as specified and as directed.

M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors joints free, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.

M&L for glazed ceramic tiles (coloured) 300x600 x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering in cement & sand mortar 1:4, complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any motar etc all as specified and directed.

M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:6) over 20mm thick screed bed including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding to edges of stone slabs one edge, such as in steps, cooking plateform,window sills and other similar situation etc complete all as directed.

M&L for 18-20mm thick machine cut kota stone slab(in single piece) in riser of steps, skirting, dado and pillar laid over cement screed 20mm thick base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L rendering 15 mm thick wall plaster in CM 1:3 mixed with liquid WPC finished even and smooth (w/o using exra cement) etc complete all as specified and directed. Note :- The cost of WPC is not included in this item The same shall be paid separetely as supply only

M&L applying evenly a tack coat of industrial itumen 85/25 at the rate of 1.20 kg per sqm including cleaning surfaces as in sunken complete all as specified and directed by Engr -in-charge.

S&F APP based polymeric membrane mimimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric land on primed surfaced by forced application complete all as specified.

M & L PCC 1:5:10 type E-2 as in sub base of floor mass filling (using 40 mm graded aggregate) with usin water proofing compound etc complete all as directed.

M&L 40mm thickness PCC 1:2:4 type B-0( using 12.5 mm graded aggregate ) with liquid WPC as sub-base in sunken floor etc (WPC shall be measured and paid separately)

M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills,sunshades, shelves, lintels, etc.and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good,cutting exceeding 20cm girth in brick walls complete all as directed..

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors and incl taking down of old GI tubes etc complete all as directed.. .

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors and incl taking down of old GI tubes etc complete all as directed.

M&L for galvanized steel water tubing medium grade of 25mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors and incl taking down of old GI tubes etc complete all as directed.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc including plastic WC seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device, complete all as specified & as directed.

S&F in repair vitreous china squatting pan (Orissa pattern) water closet (white) of size 630x450mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified & directed.

S & F in repair PVC low level flushing cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handleetc complete all as specified & directed

S&F in repair viterious china white WHB 600 x 480 counter top oval shape cascade pattern with and including PVC waste pipe and cp waste coupling 32mm dia in lead to waste pipe complete all as specified and as directed.

S&F in repairs stainless steel Sink made of 1mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 495mm x 420mm bowl size 410mm x 330mm x 160mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink. complete all as specified & directed.

S & F in repair stainless steel Kitchen plate rack of overall minimum size 750 mm x 900 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete, all as directed.

S&F in repair PVC connection pipes 450 mm long suitable for 15 mm bore GI pipe including CP brass nuts on both sides, complete, all as specified.

S&F in repair CP Bib tap fancy type 15mm dia long body complete all as specified & directed.

S&F in repair 15 mm dia chromium plated fancy type angle valve pipe with capstan head long screwed shank including cp cover plate etc all as specified and directed.

S&F in repair 15 mm bore CP brass single lever Basin mixture w/o popup waste with 450 long braided houses fixed to GI pip etc complete all as sp and directed.

S & F in repair 15 mm bore brass CP wall mixer for mixing hot & cold water with provision for over head shower with arm and long bend pipe and wall flanged screwed down for iron pipe etc complete all as specified and directed.

S&F in repair CP Pillar tap fancy type 15mm dia long body complete all as specified & directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.

S&F in repair CP shop dish fancy type fixed with SS screw on wall etc all as specified and directed.

S&F in repair toilet paper holder with flat recessed type stainless steel Complete all as specified and directed

S&F in repair PVC bath cabinet with 4 mm thick loocking mirror of overall size 560 x 410 mm fixed on wall etc complete all as specified and directed.

S&F in repair glass corner self assembly, fancy type, made of 6 to 7mm thick sheet toughened glass of size 250x250mm, fixed with CP brackets etc complete all as specified and directed.

Supply & fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long etc complete all as specified and directed.

S&F in repair CP brass tubular towel rail, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified.

S&F in repair 40mm bore PVC low density (LDPE) pipe of pressure 6kg/Cm2 fixed to wall or laid in floor, complete, all as specified.

S&F in repair brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union with Shower arm 15 mm size, 195mm long with bend of 45degree with flange complete all as specified.

Disconnecting existing tanks, exc 250 Ltr & n.exc 500 Ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.(Cleaning repairing, etc. measured separately)

Dismantling PVC water tanks and removing for capacity exceeding 250 litres & not exceeding 500 litres etc complete all as directed.

S&F 1000 Litre capacity Rotational moulded polyethylene water storage tanks triple layered in white colour (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete, all as specified and directed.

S&F for 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, all as specified.

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore, all as specified and as approved by GE/Engineer-in-Charge.

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 15 mm bore, all as specified and as approved by GE/Engineer-in-Charge.

S&F in repair 25 mm dia stainless steel curtain rods including brackets and fancy type end knobs etc complete, all as specified and directed.

Dismantling of drain pipe any type jointed in lead joints or cement joints and taking out of under floors if required

S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamp etc complete all as directed.

S&F for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamp etc complete all as directed.

S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors withcement concrete etc complete all as directed.

S&F for 110mm bore PVC (SWR) bends of any radius diminshing pieces or tappers (larger bore measured) etc complete all as directed.

S&F for 110mmbore PVC (SWR) branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engr-in-charge

S&F for 110mmbore PVC (SWR) reducers, joint to line etc complete all as specified and directed by Engr-in-charge

S&F for PVC(SWR) 'P' trap 110mm, setting and jointing with solvent cement

S&F for 110mm bore PVC(SWR) WC connectors with lip ring 110mm, setting and jointing with solvent cement etc complete all as directed.

S&F for 110mm bore PVC(SWR) floor trap, plain with SS Cockroach trap grating including jointing with solvent cement, setting and jointing with solvent cement etc complete all as directed.

S&F for PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement etc complete all as directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each, complete, all as specified & directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each, complete, all as specified & directed.

M&L PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) for filling in bed block of hold fast, back filling of chowkhat etc complete all as specified and as directed.

S& F Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified.

S&F for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified.

S&F for 32mm thick wooden flush shutters, solid core constructed with block board core and plywood face panels commercial type on both side ISI marked with 0.9mm thickness decorative laminated screened laminate type 1(mica) of surface finish both sides, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions etc

S&F for factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed.

S&F for factory made uPVC colour prelaminated Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wiremesh panels) upto 1.50m height made of (big series) frame116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately)

S&F 4 mm thick sheet glass ordinary quality glazing with oil putty in square n. exc 0.50 Sq.m in each pane complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples all as specified.

Dismantling timber scantlings 40 sq. cm and over in section, in any position for framed work

S&F plain, solid, straight chowkats and frames of second class hardwood, wrought, framed rebated on the solid rounded or chamfered, put together with glue, pinned at joints, complete all as specified & directed.

M&L for second class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, fixed with screws, sectional area exc 6 sqcm and not exc 13 sqcm . complete all as specified & directed.

M&L in repairs 18/19 mm thick block boards shutters including eadge finished with beading , grade-1 quality, exterior grade, commercial type, fixed with screws to timber frame-work, complete all as specified & directed.

M&L for 0.9mm thickness decorative laminate type 1(mica) of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions etc complete all as specified and directed.

S&F 40mm wide continuous (piano) hinges,mild steel, bright finish or electrogalvanised etc complete all as specified & directed.

S&F of auto closing concealed (L-bihari) hinges,stainless steel, bright finish or electro galvanized width of flaps 75mm (when open) fixed with CP steel screws. complete all as specified & directed.

S&F Stainless steel dull finish handles extrude type 150mm size complete all as specified & directed.

S&F of 85x45mm single rebated factory made 100% solid WPC prelam both sides (Wood Polymer Composit) panasle door frame made from 100% lead free (singal & extruded process) material with density not less than 780 Kg/Cum all as specified and directed.

S&FS & F factory made 30mm thick 100% Solid Prelam WPC ( Wood polymer Composite ) Solid Both side 0.14 micron Flush Door Shutter with 10 mm deep CNC moulding design of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cum an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N (Edge), Minimum Compressive Strength of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer - In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company

S&F of butt hinges of size 100 mm medium weight, stainless steel ISI marked complete all as specified.

S&F of 150mm size stainless steel handle (ISI marked) etc complete all as specified.

S&F 200 mm long stainless steel tower bolt (ISI marked) etc complete all as specified .

S&F 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete, all as specified.

S&F mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified.

S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed

S&F Eye door viewer (Magic Eye) of suitable size fixed with panneled door shutter complete all as specified and directed.

S & F in repair Stainless steel six peg hanger chromium plated as approved by engr-in-charge complete all as specified and directed.

S&F mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including welding work complete all as specified & as directed.

M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer etc complete all as specified.

M&L for preparation of new surfaces of steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide complete all as specified.

S&F ball catechers with 8 mm dia steel bal and brass body and strike plate magnet ball catcher for cup board shutters.

Demolition of reinforced cement concrete in floors ,beams ,chajjas,landing slab in any position or height and similar suspended works.

M&L for RCC type B-1,1:2:4( nominal mix) (using 20 mm crushed graded aggrigate) as in slab,chajjas,beam, shelves incl demolition of reinforced concrete etc complete.

Form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work n.exc 200mm thick rough finished surfaces of concrete flat etc complete all as specified and as directed.

Ditto as above but n.exc 20cm wide etc complete all as specified and directed.

M&L for TMT bar 10mm dia and over, cut to length, bent ot shape required, including cranking, bending , hooking ends and binding with and including mild steel wire(annealed not less than 0.9mm dia) icluding welding,rivetting etc complete.

Repairing of RCC projections chajjas, roofs, facia etc by necessary preparation, scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC and providing cement concrete (1:1.5:3) using 12.5 mm graded crushed stone aggregate including necessary form work and reinforced with chicken wire mesh and rendering in cement mortar 1:3 using coarse sand in patches area not exceeding 5 sqm each and thickness of RCC member not exceeding 70mm including applying two coats of finishes as provided to the existing surfaces to match with the existing surfaces in at any height complete all as specified and directed.

S&F of in repair stop valves, 15mm dia, cast copper alloy,CP fancy type with long shank and cup(concealed type) screwd down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed.

S&F in repairs long body 15mm bore two-way bib tap, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.

M&L for chequred cement concrete tiles 20cmx20cmx25 cm thick set and jointed and pointed in neat cement slurry with white cement and pigment in floors including 20 mm screed bed in CM 1:6 incl dismantling of old tilesetc complete all as specified.

Cutting holes n.exc 150 Sqcm into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required

S&F in repairs false ceiling with 4mm thick E-board Everest make white prepainted set embosed rainforced designer ceiling board of approved texure fixed with GI imposed grid frame work of size not more than 600x600mm having 24mm wide T-section runner made of 0.33mm GI sheet and angle made of 0.45mm, GI sheet suspected with 4mm dia GI wire complete all as specified. Note. All exposed surface of grid work shall be powder coated white.

Removing existing roof treatment and preparing surfaces to the entire satisfaction of Engr-in Charge /GE including taking down existing plaster,cleaning of all foreign material such as grass roots dust etc and roughening the concrete surfaces by wire brushes and washing down to remove dust etc . flushing at junction of parapets complete and removing the same to the places where directed by Engr-in-Charge.

M&L for plain cement concrete 1:2:4 type B-0( using 12.5 mm graded aggregate)as in roof for maint. the uniform slope etc any thickness at any height and in any position all as specified and directed by engr-in-charge at site.

M& L for water proofing treatment to RCC roof slab as under :(a)15mm thick rendering on concrete surfaces finished surfaces of roof and parapet wall in cement mortar 1:4 mixed with liquid WPC finished even and smooth w/o using extra cement etc complete all as specified and directed. (b)Priming surfaces and applying bituminous 85/25 [email protected] ltr/sqm over cleaned and dry roof surface including parapet complete all as specified and as directed. (c) Laying one layer of APP based polymeric membrane 3 mm thick weight not less than 3.6 kg/sqm reinforced with non woven polyster fibre weight not less than 150 gmper sqm and sealed by torch to overlap of 100 mm and 75 mm at end and side of polymeric membrane application and applying bituminous of grade 85/25 @1.20 ltr/sqm over APP membranne with bituminus aluminium paint @0.20 kg/sqm in two coat etc complete all as specified and directed. NOTE : Cost of Water proofing compound shall be deemded inclusive in quoted unit rate.

S&F in repair CP concelled valve fancy type 15mm dia etc Complete all as specified and directed

Taking down carefully copper/aluminium point wiring ( light, fan, socket , bell or power) complete including DBs,submain,cables etc all as specified and directed by Engineer-in-charge.

Taking down carefully Ceiling fan/wall fan/Exhaust fan/Geysers complete and handover to Yard-I after 2 coat of spray painting with enamel paint all as specified and directed by Engineer-in-charge.

Taking down carefully any Light fittings/fixtures any size complete including all (electrical fittings & fixtures etc) all as specified and directed by Engineer-in-charge.

Material and Labour for point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed multi stranded copper conductor single core cable 1100 volts grade in and including PVC conduit with accessories including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP all as specified and directed. Note :- Sunken box/cover plate for modular switches, sockets etc will be measured and paid seperately under relevant items and blank plate required if any will be deemed included in the item rate.and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall all as specified.

All as per Item No 131 hereinbefore but for One 5 A socket outlet on independent Board all as specified and directed.

All as per Item No 131 hereinbefore but for One 5 A socket outlet on same Board all as specified and directed.

All as per Item No 131 hereinbefore but point wiring complete with 2.5 sqmm for 3 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

Supply and fix frame plate with match cover twelve module all as specified and directed.

Supply and fix frame plate with match cover eight module all as specified and directed.

Supply and fix frame plate with match cover six module all as specified and directed.

Supply and fix frame plate with match cover four module all as specified and directed.

Supply and fix frame plate with match cover three module all as specified and directed.

Supply and fix frame plate with match cover two module all as specified and directed.

Supply and fix frame plate with match cover one module all as specified and directed.

Supply and fix terminal box suitable for twelve modular plate including cutting, grooving and plastering etc. all as specified and directed.

Supply and fix terminal box suitable for eight modular plateincluding cutting, grooving and plastering etc. all as specified and directed.

Supply and fix terminal box suitable six modular plat of size 210X75x50 mm including cutting, grooving and plastering etc. all as specified and directed.

Supply and fix terminal box suitable four modular plat of size 128x75x50 mm including cutting, grooving and plastering etc. all as specified and directed.

Supply and fix terminal box suitable for three modular plat of size 100X75x50 mm including cutting, grooving and plastering etc. all as specified and directed.

Supply and fix terminal box suitable for two modular plat of size 75X75x50 mm including cutting, grooving and plastering etc. all as specified and directed.

Supply and fix terminal box suitable for one modular plat of size 75X75x50 mm mm including cutting, grooving and plastering etc. all as specified and directed.

Supply and fix Rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.PVC pipe 25 mm dia for protection of cables all as specified and directed by Eng-in-Charge

Supply and fix GI Pipe light grade 80 mm dia for protection of cables all as specified and directed by Eng-in-Charge

Supply and fix TV Socket 1 Module Modular all as specified and directed by Eng-in-Charge

Supply and fix Telephone socket 1 Module Modular all as specified and directed by Eng-in-Charge.

Supply and fix Modular switch one way 6A 230V AC 50 HZ SP one module all as specified.

Supply and fix Modular switch one way 16A 230V AC 50 HZ SP one module all as specified.

Supply and fix Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module all as specified.

Supply and fix Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module all as specified.

Supply and fix in repair of MCB DB TPN 4 way double door type suitable for TP/FP including necessary dummy plate and necessary civil works all as specified and directed.

Supply and fix MCB SP 230V, 6-32 Amps capacity all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning 40 to 63 Amp capacity all as specified and directed.

Supply and fix isolator DP 415V,63 Amp capacity all as specified and directed.

Supply and fix Modular Regulator 230V AC 50 HZ SP two module all as specified.

S&F modular bell push single pole 1 module 6 Amp, 240 volt all as specified.

S&f call bell , ding dong / musical AC single phase 230 volts all as specified.

S&F Ceiling rose PVC polycarbonate all as specified and directed.

Supply and fixing of wall/surface mounted integrated batten LED light luminaire of 4ft length with a system wattage of 20-22W with a nominal system lumen output of 2000-2200 lumens and a minimum system efficacy of 100Lm/W. CCT shall be 6500K and CRI ≥ 80. Housing shall be extruded aluminimum with powder coating & with IP20 protection, The luminaire shall meet IP20 rating with surge protection of 2.5KVA, THD ≤10% and PF ≥ 0.95, all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified & directed.

S&F in replacement decorative wall mounted fancy light fitting made up of brass rubi lamp brand Single handed including of bulb of 9-15 watts covered by glass complete all as specified.

S&F LED bed side fitting 3 Watt 3000K 150lm complete all as specified and directed.

Supply and fix 45W Pressure die cast aluminium housing street light with system lumen of 6300 lm and system efficacy of 140 lm/w, IP-66,IK-10 single piece die cast incl spigot, dia 48-76mm,LED lifetime (L70B50) 75k Hrs with integrated optical cover. Street light should have standalone lighting control system with AUTO ON/OFF based on DUSK/DAWN timings,preset time settings with monthly variations (Jan to Dec), inbuilt real time clock for switching, incleds dimming profile for energy savings,drift not exceedind max 2mins/year, clock retention upto five yeras, auto switching off secondary power for module,dimmable driver based on PWM control, dim to off with high/low voltage cut off with 440V protection for 8 hrs for complete luminiarie incl driver and astro module,surge protection as perIEC 61000-4-5 all as specified and directed by engineer in charge

Supply and fix of lithium based energy efficient integrated all-in-one solar street light of Min 18 Watt plus/minus 2% ( Min 3000 lm) IP-65 &IK-08,pressure die cast, battery capacity min 20Ah@ 12.8V or 256Wh, panel capacity min 60 Wp with duly polyurethane coating (camaflouge colour),encases with monocrystaline solar PV panel of 65-67 WP(170/180 lm/watt) lamp with aluminium reflector for better light distribution CRI>70 COLOUR TEMPERATURE 5700-6500K microcontroller basedcharge controller cum driver automatic diming function (first four hour at full brightness and rest of time at lower light level with PIR motion sensor dusk to dawn operation suitable to working temperature -10 to 55 C weight not less than 14-16 kg with adjustable MS clamp suitable for pole wall mounting etc complete as req protection short circuit overload reverse polarity complete all as specified and directed.

Supply and fix LED gate light of 40/45W LED Postop luminaire with aluminium pressure die-cast mounting spigot & polyester powder coating in addition to a specific weathering resistance treatment, color RAL7011. Non-yellowing transparent Polycarbonate UV-protected round symmetrical diffuser with circular radial pattern for glare-free and even light distribution. High Efficiency long life LED module with efficacy of >100Lm/W, CCT 4000K, and CRI >70. Powered by built-in electronic driver with THD <10%, 4kV inbuilt surge protection, high cut-off at 325V & auto-restart, including 8hrs. protection from 440V (P2P). Suitable for pole mounting having OD of 60 mm and height of 6 meters. Fixture lumen efficacy >4500 Lm, IP66 (no glue), IK05, PF>0.95, Operating voltage range: 140- 277V, all as specified and directed by engineer in charge.

Material and Labour for Submain wiring with 4 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed.

Material and Labour for Submain wiring with 4 runs of FRLS grade PVC copper conductor cable 10 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 10 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed.

Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through and including PVC Conduit pipe 25 mm dia with all fittings all as specified and directed.

Supply,fixing, testing and commssioning electric kitchen chimney,LED lighting, environment frindly ,powerful suction capacity, motion sensor wall mounted thermal overload protector effective safty feature for motor, all wire are of flame retardant materials for utmost safty,metallic body, pyramid/ plain shape auto clean cuverd glass filterless touch control with motion sensor min 60 cm, 1200 m3/h suction,3 speed setting 150watt, power of lamp 1.5 watt easy to clean oil collector tray, colour black wall mounted, power saving minimum 7 yrs warrenty complete all as specified and directed. Make:- ELICA/Faber/IFB/KAFF/GLEN

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with copper winding all as specified and directed. Note:- Down rods of suitable length( 4feet,5 feet or 6 feet) is incl in the item rates and no extra payment will be done to the contractor for the same.

Supply and fixing of wall fan of 300/400 mm sweep, 220 - 240 volts, AC, 50 Hz 1330 RPM, 55 Watts power input, air delivery 65 Cum/min with all accessories complete all as directed by Engineer - in - charge.

Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20 amps SPN MCB all as specified and directed

Material and labour Earthing complete with galvanized steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 connected to earth testing point including necessary excavation, earth work, PCC pit ,RCC cover 1:2:4 B1 with 8 mm dia MS rounds 1.5 kgs, funnel ,watering pipe etc. all specified and directed including testing on completion all as specified and directed.

Cutting chases in concrete wall/stone for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 20 cm girth and matching wall color.

Supply and fixing Exhaust fan PVC body 250 mm sweep working on single phase supply incl. all accessories including electrical connection with required wire complete all as specified and directed.

Supply and fixing Digital storage water heater (Geyser) Square type of capacity 25 ltrs, 230 volts, power consumtion 230V, vertical type, Rated pressure 5.6 bar pressure rating more than 8 bar suitable for high rise buildings,rust and shock proof ABS Outer body for lomg life,Stainless steel inner tank of 304 grade,65 MPa bar pressure,colour changing lights that change from blue to amber to indicate the hotness of water,automatic shut off including four nos of rag bolts and making the elctrical / water supply connection including testing after installation complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair of MCCB DB SPN 8 way double door type suitable for TP/FP including necessary dummy plate and necessary civil works all as specified and directed.

Supply and fix in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed and comprising of the following:- (a) MCCB, 100 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. (b) MCB, SPN, AC, 240 volt of 32 to 40 Amp, "C" curve, 10 KA breaking capacity - 08 Nos.

Supply and fix MCB SP 230V, 6-32 Amps capacity all as specified and directed.

Supply and fix MCB SPN 230V, 32 to 63 Amp capacity all as specified and directed.

Supply and fix MCB TPN 230V, 63 to 100 Amp capacity all as specified and directed.

Supply and fix MCCB FP 415V, 100 Amp 25K capacity all as specified and directed .

Supply and fix Lamp Holder(ISI Marked) PVC/Polycarbonate type with back plate suitable for batten fittings, all as specified and directed.

S&F LED bulb 9/15 Watt B 22 CDL complete all as specified and directed.

S&F in replacement surface/ceiling mounting LED down lighter of 15 watt warm white/white colour square shape white powder coated CRCA housing with LED seamless front frame with flat white high transmission acrylic cover complete all as specified and directed.

S&F in replacement of integrated LED bulk head fitting 10 Watt, 6500K with IP 65 protection comprises of high pressure die cast aluminium housing, polycarbonate cover, etc complete all as specified and directed.

Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed.

Cutting of holes for fixing Exhaust fan/Air-freshner of any make and size and making good of the disturbed surfaces all as specified and directed by Eng-in-charge.

Supply and fixings Exhaust fan 300 mm sweep steel body fix existing wall all as specified and directed.

R K CONTRACTOR AND SUPPLIERS (BID ID -3324435)

kaushalya construction (BID ID -3325145)

rajan construction (BID ID -3333833)

SEAHAWK ENTERPRISES PVT LTD (BID ID -3322349)

jayanti associates (BID ID -3323652)