REPAIR TO SEWAGE LINE CLEANING OF SEPTIC TANKS MANHOLES COVER SLABS AND RELATED MISC WORK UNDER GE AF TECH AREA AGRA AT AF STN AGRA

Amount

Dewatering/desludging of septic tanks, Grease trap etc of any depth, cleaning of all sludge, silt residue of both organic and inorganic nature by Mechanically used Hydraulic suction sewer cleaning machine having suitable tank capacity including skilled driver, operator & labour etc and disposal off the same out side the defence area all as directed by Engr-in-Charge. Note - 1. After receiving complaint from MES Rep by Contractor's supervisor / Site Engineer, job to be completed within 12 working hours. 2. Debris and sludge etc taken out shall be measured in "cum" .The quantum of work done for payment purpose shall be the solid content of sludge or debris. Solid content shall be 50% of volume of loose sludge/debris containing sludge water.3 :- In case contractor failed to rectify scheduled program a recovery of Rs.500/- per day shall be deducted from his payment.

M&L for mechanically used water sucking hydraulic pressure machine (min 3000 litre capacity) for cleaning of blocked manholes/sewage line and disposed off the same out side the defence area all as specified and directed by Engr-in-Charge. Note :-1. After receiving complains from MES rep by contractor's, supervisor / site engineer, Job to be completed within 12 working hrs. Note- 2 In case contractor failed to deploy the machine as per scheduled program a recovery of Rs.500/- per day shall be deducted from his payment.

Cleaning of blockage from WCs/Gully trap/Nahani trap/Floor traps and vertiical pipes of any size by removing cover if required & refixing in position including removal of sludge & sediments from chamber & disposing it away from the domestic premises all as specified and directed.

Cleaning of chocked /blocked sewage lines of any bore pipe by rodding /mechanically taking out loose sedimented sand dirt, oil and grease, sludge water, rags, fibers or vegetation etc from any depth of sewage lines including removal of sludge/debris/building materials to a distance exc 250m but n.exc 500m and buried under ground complete all as specified and as directed. Note:- All T&P if required are deemed to be included in the quated rate.

Demolition and breaking up drain pipes 150mm dia salt glazed stone ware/ AC or reinforced concrete pipe set in cement mortar including removal from site complete all as specified and directed by Engr-in-charge

Demolition and breaking up drain pipes 200mm dia salt glazed stone ware/ AC or reinforced concrete pipe set in cement mortar including removal from site complete all as specified and directed by Engr-in-charge

Excavation in trenches (loose soil) not exc 1.5 m wide and not exc 1.5m depth and getting out, complete all as specified and directed by Engr-in-charge.

Excavation in trenches (loose soil) not exc 1.5 m wide and exc 1.5m but not exc 3.0m depth and getting out complete all as specified and directed by Engr-in-charge

Demolition of brick masonry built in CM complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete in ground floors and pavings etc not exc 15cm thick above or below ground level complete all as specified and directed by Engr-in-charge.

M&L for Cement concrete in foundations, filling and mass concrete type C2 1:3:6 (40mm graded stone aggregate) complete all as specified and directed by Engr-in-charge.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6M mean radius built in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

M&L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth without using extra cement mixed with water proofing compound as per manufacturer's instruction complete all as directed and specified. Note:- Supply only water proofing compound shall be measured and paid separately under relevant items here in after.

Supply only water proofing compound.

S&F 150 mm bore/Inner Dia double wall SW Pipe in any length , laid in trenches or in floors all as specified and directed.

S&F 200 mm bore/Inner Dia double wall SW Pipe in any length , laid in trenches or in floors all as specified and directed.

Removing excavated material n exc 100m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge.

Returning, filling soft / loose soil in including spreading, leveling, watering and well ramming in layers not exc 25cm complete all as specified and directed by Engr-in-Charge.

M&L for PCC Type B-1 (1:2:4) using 20mm graded stone aggregate) as in man hole, surface channel and drain including finishing the surface complete all as specified and directed.

S&F in repair factory made perforated Precast RCC drain cover 50 mm thick of any size incl 1mm thick MS Sheet all around the cover all as specified and as directed by Engr-in-charge.

S&F in repair factory made perforated Precast RCC Man Holes cover 75 mm thick of any size incl 1mm thick MS Sheet all around the cover all as specified and as directed by Engr-in-charge.

Cutting into existing manholes for 150 mm dia of pipe for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required etc completed all as specifeid and directed.

Cutting into existing manholes for 200 mm dia of pipe for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required etc completed all as specifeid and directed

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection, path /hard standing /sub base etc complete all as specified and directed by EIC.

M&L for Chequered cement concrete tiles 25mm thick ,area of each tile exceeding 0.05 sqm but not exceeding 0.09 sqm in floors, set jointed and pointed in neat cement slurry with mixture of white cement and pigment in equal proportion over and including on screed bed or bedding layer of cement mortar 15 mm thick 1:6 complete all as specified & directed

M & L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment laid and bedded on sand cushioning complete all as specified and directed. Note:-Sand cushioning shall be measured and paid seperately.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L cement concrete Type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) in kerb stone ,copings,, apex stones, , anchorage blocks, , etc.(of any section as directed), with plain fair faces, including chamfered weatherings, throating etc complete all as specified and as directed.

M & L for prepararing new concrete surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of priming paint complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, fixed on walls or floors complete all as specified and as directed

S&F in repair PVC (SWR) plain bend 110 mm dia, of any radius with rubber ring joints, complete all as specified and as directed

S&F in repair PVC (SWR) pipes 160mm dia single socketed, in any length with rubber ring joints, fixed on walls or floors complete all as specified and as directed

S&F in repair PVC (SWR) plain bend 160 mm dia, of any radius with rubber ring joints, complete all as specified and as directed

S&F in repair 100 mm Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches/floors/ fixed to walls all as specified and as directed.

S&F in repair 75 mm Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls all as specified and as directed.

S&F in repair Bend for 100 mm Cast iron soil, waste and vent pipes all as specified and as directed.

S&F in repair Bend for 75 mm Cast iron soil, waste and vent pipes all as specified and as directed.

S&F in repair Double Bend with ovel excess door for 100 mm Cast iron soil, waste and vent pipes all as specified and as directed.

S&F in repair Double Bend with ovel excess door for 75 mm Cast iron soil, waste and vent pipes all as specified and as directed.

S&F in repair 'P' or 'S' Trap for 100 mm Cast iron soil, waste and vent pipes all as specified and as directed.

S&F in repair 'P' or 'S' Trap for 75 mm Cast iron soil, waste and vent pipes all as specified and as directed.

S&F in repair cast Iron Cowls for 100 mm Cast iron soil, waste and vent pipes all as specified and as directed.

S&F in repair cast Iron Cowls for 75 mm Cast iron soil, waste and vent pipes all as specified and as directed.

S&F in repair vitreous china urinal half stall type flat back size 465X355X265m (minimum) of white with grating and union for discharge pipe including chromium plated water spreader, connection pipe and discharge down pipe including urinal spreader and waste pipe complete all as specified and as directed

S&F in repair vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) complete all as specified and as directed

S&F in repair vitreous china wash hand basin, white, (flat back or angle back type) of size 580x450 mm including supplied and fixing angle iron braket and CP Pillar tap fancy type 15 mm bore,CP waste coupling, PVC waste pipe 32 mm dia, and 01 No PVC connection 15 mm dia & 450 mm long complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and as directed

M&L for 25 mm thick PCC 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in flooring in leveling course complete all as specified and as directed

M&L for Non skid, joint free (edge cut) coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors etc laid over with and including 15 mm thick screed bed or bedding layer in CM (1:6), set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and as directed

M&L for 10 mm thick Vitrified ceramic tiles, light shade double charged (square/recangular) area of each tile exceeding 0.36 Sqm but not exceeding 0.42 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of 15 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed

M&L for glazed ceramic coloured tiles 200x300x 7mm thick as in dado/vertical surface with and including 10mm thick rendering for bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and as directed

M&L for glazed ceramic coloured tiles 300x450x 7mm thick as in dado/vertical surface with and including 10mm thick rendering for bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and as directed

M&L for Non skid, joint free (edge cut) coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc laid over with and including 15 mm thick screed bed or bedding layer in CM (1:6), set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and as directed

M/s K S Builders

deva engineers

C P Singh and Co

M/S SINGH ELECTRIC CO

B K Construction Company