125/EDC(G)/2023-24

Amount

All these below items/materials from S.N. 1.01 to 1.40 will be given and errected by the contractor on his own cost as per estimate/Resspo Norms.

CLAMP FOR TOP, DROPPER AND T-OFF etc.

LT Clamp

LT SHACKLE INSULTER

M.S. NUT & BOLT

G.I. STRIP for Earthing

V TYPE X-ARM HOLDING CLAMP

Guarding Angle Holding Clamp

EYE HOOK

G.I. Pipe 6" Dia

11 KV TPMO WITH COMPLETE FITTINGS

CLAMP FOR DROPPER ANGLE

DROPPER ANGLE (L/A)

D.O. FUSE SET (WITH CHANNEL AND CLAMP)

AL-LUG 95 SQMM

BRASS NUT 12 MM

BRASS NUT 20/30 MM

DISTRIBUTION BOX MASSIONARY TYPE (FUSE SET COMPLETE)

AL-LUG 400 SQMM

AL-LUG 250 SQMM

AL-LUG 630 SQMM

AL-LUG 240 SQMM

CONNECTOR FOR 630 KVA T/F

CONNECTOR FOR 100 KVA T/F

COPPER L - PIECE 62X250X12MM

FIRE BUCKET WITH SAND

FIRE BUCKET STAND

RUBBER EARTH MAT

Aluminium Paint

Sand Paper

Danger Board

Name Plate

Clamp for Danger Board & Name Plate

Dead - end Clamp

Pearsing Connector

I Hook Holding Clamp

Suspension Clamp

F- Bracket

Tyre for mobile trolly

EARTHING COMPLETE FOR STRUCTURE

Stone Pad

Loading, Unloading and safe cartage of the following materials (S.N. 2.01 to 2.60) from Electricity Store Centre, Gonda to the work site/dump site (Distance up to 40 km)

PCC Pole 8.5 METER

ST POLE 11 METER

25 KVA T/F

63 KVA T/F

100 KVA T/F

250 KVA T/F

ABC CABLE 1×25sqmm

ABC CABLE 3×50

ABC CABLE 3×95

ABC CABLE 3×120

ACSR Weasel Conductor

ACSR Dog Conductor

11 KV XLPE CABLE 3 × 70

11 KV XLPE CABLE 3 × 120

11 KV XLPE CABLE 3 × 185

11 KV XLPE CABLE 3 × 300

11 KV XLPE CABLE AL. 1 × 400

33 KV XLPE CABLE 3 × 120

Controll Cable 2x2.5sqmm

Controll Cable 4x2.5sqmm

11 KV JOINTING KIT FOR 3 × 70

11 KV JOINTING KIT FOR O/D 3 × 120

11 KV JOINTING KIT FOR I/D 3 × 120

11 KV JOINTING KIT I/D FOR 3 × 185

11 KV JOINTING KIT O/D FOR 3 × 185

11 KV JOINTING KIT I/D FOR 3 × 300

11 KV JOINTING KIT O/D FOR 3 × 300

33 KV JOINTING KIT O/D FOR 3 × 120

33 KV 3 × 120 Sqmm S/Th. Kit.

11 KV V-Type X-Arm

33 KV V-TYPE STEEL X-ARM

TOP CHANNEL

11 KV DROPER CHANNEL

33 KV DROPER CHANNEL

SUB STATION BASE

T-OFF CHANNEL

11 KV PIN INSULATER WITH PIN

33 KV POLYMERIC PIN INSULATOR WITH PIN

11 KV DISC INSULATER WITH FITTING

33 KV POLYMERIC DISC INSULATOR 70 KM (B & S TYPE)

EARTHING COMPLETE

STAY SET COMPLETE

24 VOLT BATARY

BATARY CHARGER

G.I. Wire 8 SWG

Guarding Angle

Distribution Box 1 Phase

11 KV PT COMPLETE SET (11000/110V) FOR TOSHIBA MAKE VCB

11 KV CT (200/100/5A) FOR TOSHIBA MAKE VCB)

11 KV FUSE SET

33 KV CT 400/200/1-1-1A

33 KV Transformer Control Pannel For Single Feeder

33 KV Transformer Control Pannel For double Feeder

33 KV LIGHTING ARRESTOR

33 KV Vacume Circuit Brakar 1250 Amp.

LT PVC INSULATED CABLE 1X400 SQ.MM

LT PVC INSULATED CABLE 1X630 SQ.MM

LT PVC INSULATED CABLE 1X1000 SQ.MM

LT PVC INSULATED CABLE 1X240SQMM

Other material

Erection of single PCC/ST Poles (8.5/11 Mtr Long) for 11 KV/L.T. line alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site (All decentralize material shall be given by the contractor on his own cost.)

Erection of sectional double pole sectional PCC/STP pole (8.5/11 mtr long) alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site. (All decentralize material shall be given by the contractor on his own cost.)

Earthing of pole.

Erection and Grouting of stay sets alongwith complete fittings. Cement, Sand & Brick ballast provided by the contractor at his own cost.

Grouting of Poles with 1:4:8 CC ratio of cement, sand & brick ballast, backfilling of pits with mud completely.All required materials provided by the contractor at his own cost.

Laying, stringing, sagging & binding of conductors of 11 KV in 3 phase, 3 wire line with jumpering (where as required)

Construction of 11/0.4 KV S/S for following capacity of T/F with mounting and fitting of T/F on plinth/double pole with proper fitting of all acessories and connecting with all circuit including earthing of T/F fitting with all accessories.

25 KVA T/F

63 KVA T/F

100 KVA T/F

250 KVA T/F

Laying, Stringing & Sagging of ABC Cable up to proper sag for the following size cable as per estimate/resspo norms

ABC CABLE 1×25sqmm

ABC CABLE 3×50

ABC CABLE 3×95

ABC CABLE 3×120

Laying Stringing sagging & Binding of All size XLPE cable where is required as per estimate/Resspo norms.

11 KV XLPE CABLE 3 × 70

11 KV XLPE CABLE 3 × 120

11 KV XLPE CABLE 3 × 185

11 KV XLPE CABLE 3 × 300

11 KV XLPE CABLE AL. 1 × 400

33 KV XLPE CABLE 3 × 120

Installtion/Errection/Laying/stringing of the following items as per estimate/resspo norms.

Diffent size Controll Cable 2x2.5sqmm

33/11 KV different size Jointing kit

33 KV 3 × 120 Sqmm S/Th. Kit.

33/11 KV PIN INSULATER WITH PIN

33/11 KV DISC INSULATER WITH FITTING

11 KV PT COMPLETE SET (11000/110V) FOR TOSHIBA MAKE VCB

11 KV CT (200/100/5A) FOR TOSHIBA MAKE VCB)

33 KV CT 400/200/1-1-1A

33 KV Transformer Control Pannel For Single/double Feeder

33 KV Vacume Circuit Brakar 1250 Amp.

Different size LT PVC INSULATED CABLE

G.I. Pipe 6" Dia

Installation of TPMO, D.O. fuse, Al-Lug, Brass Nut, DB box, L-Piece, Fire Bucket and stand, Rubber Mat, Danger Board, Name Place, type, Connector for T/F, Battry and charger, L.A. etc. and replacement of clamp /insulator/X-arm/CT/PT etc.

Gaurding of H.T./L.T. line with complete fittings as per estimate/resspo norms (All the decentralize material shall be given by the contractor)

Loading, Unloading and safe cartage of the following T/Fs from the work site/dump site to Electricity Store Centre, Gonda (Distance up to 40 km)

EARTHING OF CT WITH G.I. EARTHING STRIP Upto water lavel as per Estimate/Resspo Norms. (All the required material shall be given by contractor on his own cost.)

Chemical Earthing of t/f (with G.I. strip connection) as per Estimate/Resspo Norms. (All the required material shall be given by contractor on his own cost.)

CHIMICAL EARTHING OF CT WITH G.I. EARTHING STRIP as per Estimate/Resspo Norms. (All the required material shall be given by contractor on his own cost.)

BORE TYPE DELTA EARTHING depth 40 feet for control room with GI strip as per Estimate/Resspo Norms. (All the required material shall be given by contractor on his own cost.)

BORE TYPE Pipe EARTHING depth 40 feet with GI strip as per Estimate/Resspo Norms. (All the required material shall be given by contractor on his own cost.)

Construction of Foundatin for VCB as per Estimate/Resspo Norms. (All the required material shall be given by contractor on his own cost.)

Construction of Foundatin for CT as per Estimate/Resspo Norms. (All the required material shall be given by contractor on his own cost.)

Construction of Foundatin for CONTROL PANNEL as per Estimate/Resspo Norms. (All the required material shall be given by contractor on his own cost.)

TRANSFORMER PLINTH REPAIRING as per Estimate/Resspo Norms.(All the required material shall be given by contractor on his own cost.)

Wiremesh fencing with 1 door arrangement including grouting of footings and proper fxing as per Estimate/Resspo Norms. (All the required material shall be given by contractor on his own cost.)

CONSTRUCTION OF PLINTH WITH FENCING as per Estimate/Resspo Norms. (All the required material shall be given by contractor on his own cost.)

Construction of Plinth for DISTRIBUTION BOX MASSIONARY TYPE (WITH FUSE SET COMPLETE) as per Estimate/Resspo Norms. (All the required material shall be given by contractor on his own cost.)

Interpolling in long span, resagging of loose conductor and replacement of damage X-Arm and F-Clamp and straightening of tilted pole providing stay set as required in HT line.

Cutting of tree branches for cleaning route of 11 KV/LT line at the work site (25 mtr.= 1 Job)

Carrage of scrap/conductor from site to store

Dismentaling old material

Dismentaling old line

S.R. Infraconstruction Pvt Ltd