Loading
Loading…
Loading…
Tender Value
₹4.0 L
EMD Value
₹8,029
Closing Date
22 Jul 2026, 3:30 pm7d left
Executive Engineer
IWD IIT KANPUR
SITC of surface lights LED Tube lights and pole lights in Hall 10
2026_IITK_917179_1
33/EE/Elect/2026-27
Open Tender
Electrical Works
60 days
IIT Kanpur
As per tender
3 documents required · 3 mandatory
₹0
₹8,029
14 Jul 2026
14 Jul 2026
23 Jul 2026
14 Jul 2026
22 Jul 2026
14 Jul 2026
14 Jul 2026 - 17 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supplying & drawing following sizes of FRLS PVC insulated copper conductor single core cable in / on the existing surface / recessed, PVC / steel conduit as reqd. | |||||
| 1.1 | 3 x 1.5 Sq.mm.. | 50 | Mtr. | 103 | ₹5,150 |
| 2Supply,Installation,Testing and commissioning LED light fittings integrated (with lamps) including connection,nut bolts, washer and screw etc. after removing old complete and submitting the dismantle in store as required. | |||||
| 2.1 | LED light fitting 20 watt with AL-Batten,Make_Crompton | 15 | Nos. | 904 | ₹13,560 |
| 2.2 | LED Ceiling Light 6 watt FR-plastic_housing (round/square shape),Make_Crompton | 494 | Nos. | 601 | ₹2,96,894 |
| 2.3 | LED Ceiling Light 12 watt FR-plastic_housing (round/square shape),Make_Crompton | 31 | Nos. | 837 | ₹25,947 |
| 2.4 | LED Bulkhead fitting 10 watt, 120 lm/W, IP65; Make_Crompton | 9 | Nos. | 1,140 | ₹10,260 |
| 2.5 | LED Post Top Lantern 40 watt (Make_Crompton Cat.No.LPTO-40-CDL-M) | 3 | Nos. | 10,016 | ₹30,048 |
| 3LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt).: Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC,frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI>70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till lifeends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in allrespect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). | |||||
| 3.1 | 25 watt | 1 | Nos. | 1,575 | ₹1,575 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.19 MB
Tendernotice_2.pdf
PDF • 1.33 MB
BOQ_963858.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid