General Ground at Singa HQ with wall and Gate

(SH-Jungle Clearance)

Clearing and grubbing road land (Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs,spalings and trees girth upto 300 mm removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials

(SH-Earth work Land Development for Ground)

Excavation in Ordinary Rock with Dozer with lead upto 100 metres (Excavation for roadway in ordinary rock by deploying a dozer, 80 HP including cutting and pushing the cut earth to site of embankment upto a distance of 100 metres ( average lead 50 metres ), trimming bottom and side slopes in accordance with the requirements of lines, grades and cross sections.)

( SH: Brick Masonry compound Wall )

Earth work in excavation in foundation and trenches etc. in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulders upto 30 cm size, saturated soil and rock), lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers, when required, into plinth sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 50m.

Providing and laying in foundations and plinth cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.

a) Foundation and plinth

Reinforcement of RCC work including bending, binding and placing in position complete.

a) Mild steel and medium tensile steel bars.

b) Cold twisted bars.

Centring and shuttering including strutting, propping etc and removal of form work for :

a) Foundation, footings, bases of columns etc. and mass concrete.

e) Column, pillars, posts and struts etc.

Reinforcement cement concrete work in foundations,footings,bases of column etc and mass concrete excluding cost of centering,shuttering and reinforcement in:

b) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).

Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.

b)1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).

Reinforced cement concrete work in columns,piers,abutments,post and strut etc upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.

a) 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).

Half brick work with best available local bricks in foundation and plinth in cement concrete mortar 1:4 ( 1cement:4 fine sand )

Extra for half brick work with best available local bricks in superstruture above plinth level.

12 mm cement plaster 1:4 ( 1 cement : 4 fine sand )

( SH: Providing and Fixing M.S. Gate )

Steel work in single secton including cutting, hoisting, fixing in position and applying priming coat of red lead.

In T. Angle

In flats upto 10 mm thickness

Welding length of frame for Gas Welding

Labour for painting of square bars.

Painter (Ist Class)

Belder