E.I. Work of H. No. 803 and 804, Ground Floor, Water Works Colony, Sector-32 A, Chandigarh

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. Group C

Supplying and fixing of modular type electronics fan regulator:- Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

S/E of Ceiling Fans 1200mm sweep without fan regulator including M.S. pipe as per site requirement and wiring complete in all respect Make Havell's/ Bajaj/ Crompton/ Panasonic including making connection with 23/.076' flexible wire to be adjacent fan point with regulator. The work shall be executed to the entire satisfaction of Engineer in charge.

Supply & Erection of 18-20W LED Batten light with system Lumens 1800-2000 having efficacy 100 lm/W; THD <10%, Power factor >0.9, CCCV driver, Surge protection 2.5 kV; Operating Voltage Range - 100V - 300Volts. The luminaire housing should made of aluminium Extruded body. Ref- Make of Philips/ Osram/ Wipro/ Crompton/ Bajaj total system Power consumption 18-20 Watt complete in all respect as required. The fitting should provides Elegantly designed and glare free light and specification of LM-79 and LM-80. The fixture should be comprehensively warranted to be repaired or replaced for any defect within 2 years of installations.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.

Supplying and fixing suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.

Supply & Erection of Exhaust Fan heavy duty (300mm) 1400 RPM of Panasonic/ Havell’s/ Bajaj/ Philips/ Crompton make complete with motor blades along with louver to be installed on existing hole in wall/ glazing with suitable arrangement. The rate includes cost of all labour, carriage to site, testing, commissioning of Exhaust fan & connection to existing light panel. The job shall be executed to the entire satisfaction of Engineer-in-charge.

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supply & Erection of 12 Watt LED Bulk Head Fitting with system Lumens 2700 to 3000 having efficacy 100 lm/W; THD <10%, Power factor >0.95, Rated Voltage 230V, Beam Angle of LED 120°, CRI > 80, LED Junction Temperature < 80°, Workign Temprature - 10° to 50°, Working Humnidity 10% to 90% RH, Life > 50,000 Hrs, Operating Voltage Range - 100V - 270Volts. The Pressure die cast aluminium housing, power coated with weather proof gasket ensuring IP65. Ref- Make of Twinkle LuxMax- CL-S-12/ Philips/ Osram/ Wipro/ Panasonic/ Crompton total system Power consumption 12 Watt complete in all respect as required. The fixture should be comprehensively warranted to be repaired or replaced for any defect within 5 years of installations.

Supply and Erection of ISI marked bakelite button holder ISI marked including connection. The work should be executed to the entire satisfaction of Engineer in Charge.

S/F’C series, SP MCB Supply and fixing 6 amps to 32 amps rating, 240 volts ‘C’ series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB Complete with connections testing and commissioning etc as required. Single pole 16 Amps “C” series Make of Anchor, Havells, Legrand, ABB, Siemens, L&T. The work shall be executed to the entire satisfaction of Engineer in charge. ( Single Pole)

S/F’C series, DP MCB Supply and fixing 5 amps to 32 amps rating, 240 volts ‘C’ series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB Complete with connections testing and commissioning etc as required. Double pole 16 Amps “C” series Make of Anchor, Havells, Legrand, ABB, Siemens, L&T. The work shall be executed to the entire satisfaction of Engineer in charge.

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required

5/6 amps switch

2 way 5/6 amps switch

3 pin 5/6 amp socket outlet

Bell push

PVCCON S/F PVC Conduit: Supplying & Fixing of following sizes of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. The work shall be executed to the entire satisfaction of Engineer in charge.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required

3 x 2.5 sq. mm

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. The work must be completed as per the entire satisfaction of Engineer in Charge 2 x 4 sq. mm + 1 x 4 sq. mm earth wire

Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

S/F modular boxes, base & cover plate: Supplying and fixing following size/modules, G.I. box alongwith modular base & cover plate for modular switches North West/ Crabitree/ Legrand/ National make. in recess etc as required.

1 or 2 Module 75mmX75mm

4 Module 125mm x 75mm

8 Module 125mm x125mm

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

8 way, Double door

Point wiring in PVC conduit, with modular type switch: Wiring for light point/fan point/exhaust fan point/ cal bell point with 1.5 sq.mm FR PVC insulted copper conductor single core cable in surface/ recessed PVC Conduit with modular switch, modular plate, suitable G.I. box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc as required. Group-C

Please Enable Macros to View BoQ information