Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.5 LAccepted-AOC | L1 | Accepted-AOC TENDER FOUND LOWEST AND REASONABLE HENCE ACCEPTED | |
| 2 | L2₹39.9 L+₹42,715 (1.08%)Rejected-AOC | L2 | Rejected-AOC NOT LOWEST | |
| 3 | L3₹41.5 L+₹2.1 L (5.32%)Rejected-AOC | L3 | Rejected-AOC NOT LOWEST | |
| 4 | L4₹43.7 L+₹4.3 L (10.8%)Rejected-AOC | L4 | Rejected-AOC NOT LOWEST | |
| 5 | L5₹45.7 L+₹6.3 L (15.9%)Rejected-AOC NO 98 1 1C YOJANANAGAR LOHEGAON WAGOLI ROAD NEAR SIVBHA DARBAR HOTEL LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L5 | Rejected-AOC NOT LOWEST |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
12 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
TA YASHODA
GARRISON ENGINEER (SOUTH), MUDFORT, SECUNDERABAD PIN - 500003
COMPREHENSIVE MAINTENANCE OF B/R ITEMS IN ZONE 1 UNDER AGE B/R (S) NO II OF GE (SOUTH) SECUNDERABAD
2023_MES_607329_1
GE(S)/SEC/TOKEN-36 OF 2023-24
Open Tender
Civil Works
Item Wise
240 days
SECUNDERABAD
For Enlisted contractors class D and above category a (i) and for unenlisted contractors meeting the eligibility criteria of above class and category for along eligible class with EMD
6 documents required · 6 mandatory
₹500
GE SOUTH, MUDFORT, SECUNDERABAD
₹90,000
Yes
29 Sept 2023
30 Jun 2023
15 Aug 2023
30 Jun 2023
12 Aug 2023
29 Jul 2023
30 Jun 2023 - 28 Jul 2023
Amount
Roughening the surfaces of old concrete roof surfaces by picking , sweeping clean and washing down with water to remove dust etc including removal of old treatement of any description and removing the debris to a distance of exc 50 m away from Plinth protection of the building all as specified and as directed.
M& L for 10mm thick rendering in CM 1:4 using water proofing compund at the rate of 3% weight of cement over concrete surfaces. NOTE ; WPC will be measured and paid separately.
M&L for priming the plastered roof surfaces with bitumenous primer @ 0.4 Ltr per sqm and applying APP based polymeric membrane minimum weighing 3 Kg per Sqm and minimum 3mm thick reinforced with polyster non wove fabric (Wt not less than 150 gms/per Sqm) by forced application and apply bitumen base aluminium paint @ 0.1Ltr /Sqm on laid APP membrane complete all as specified and as directed.
Supply only water proofing compund complete all as specified and as directed.
M&L 40mm Thick PCC (1:2:4) TYPE B1 by using 20mm graded stone aggregate as in roof , where required ober slabs inclufing necessary form work and finishing the exposed surfaces fair even without using extra cement complete all as specified and as directed.
Disconnecting existing tanks setting aside ( or laying if required) for carry out the roof repair cleaning and removing all scale & dirts etc from tanks & hoisting reconnecting & refixing with all new GI fittings in old or new position of the tank capaacity exc 250 Ltrs & n.exc 500 ltrs complete all as specified and as directed.
S& F in repairs Rotational moulded PVC water storage tank hoisted and fixed in positon of 500 ltrs capacity incl dismantling existing water tanks complete all as specified and as directed.
S& F in repairs Rotation moulded PVC water storage tank hoisted and fixed in position 1000 ltrs capacity incl dismantling existing water tanks complete all as specified and as directed.
S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated aluminium rod and high dessity plastic ball screwed for iron pipe and fixed ( minimum weight 455 gms) complete all as specified and as directed.
S&F 20mm Ball valves high pressure of PTMT with epoxy coated aluminium rod and high dessity plastic ball screwed for iron pipe and fixed ( minimum weight 455 gms) all as specified and as directed.
S&F 16 mm bore CPVC pipes SDR 11 pipes & Plain CPVC SDR 11 fittings and fixed complete to walls and ceiling or laid in floors including taking down steel tubing and connections of 15mm dia complete all as specified and as directed
S&F 20MM steel water tubing medium grade galvanised with all fittings & fixing including taking down steel tubing and connections of 20mm dia complete all as specified and as directed
S&F in repairs 20mm dia bore Gun metal gate valve with iron wheel head screwed both ends for iron pipe 20mm bore
Taking down plastering on brick/ Stone walls etc including racking out joints, hacking for key, scrabing down with water etc upto a height of 8Mtrs including necessary scaffolding all as specified and as directed.
M & L 15mm thick rendering with as in CM 1:4 and finishing even and smooth without using extra cement for areas complete all as specified and as directed Note: Patchwork upto a height of 8Mtrs including necessary scaffolding.
M & L for 15 mm thick rendering in Cement Mortar 1:6 on fair faces of Brick works or Concrete surfaces and finishing even and smooth without using extra cement Note: Patchwork upto a height of 8Mtrs including necessary scaffolding.
M & L for rendering 10mm thick cement mortar plaster in CM 1:3 on concrete surfaces on ceiling including finishing even and smooth w/o using extra cement Note: Patchwork upto a height of 8Mtrs including necessary scaffolding.
M & L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of Primer complete all as specified and as directed..
M & L for preparing new plastered surfaces of walls and applying 2 coats of OBD on new surface of walls over a coat of Primer complete complete all as specified and as directed.
M & L for applying three coats of white wash on ceiling including preparation of new plastered surfaces complete all as specified and as directed.
M & L for Preparation of plastered or unplastered old decorated surfaces of wall and applying one coat of cement base paint complete complete all as specified and as directed. NOTE : Cement Base Paint will be done by roller only.
M & L for preparing Old plastered surfaces of walls and applying one coats of OBD complete all as specified and as directed
Dismanting asbests cement ( corrugated, semi-currugated etc.) sheets in roof covering upto a height of 8Mtrs including necessary scaffolding complete all as specified and as directed
S & F prepainted galvalume aluminium zink coating GI based corrugated steel sheeting 0.5mm thick of any colour having tensile stength of 550 MPA asin roof covering/cladding to wall fixed with self tapping screws as specified upto a height of 8Mtrs including necessary scaffolding complete all as specified and as directed
S & F prepainted galvalume aluminium zink coating GI based plain steel sheeting 0.5mm thick of any colour having tensile stength of 550 MPA asin roof Ridge/covering/cladding to wall fixed with self tapping screws as specified upto a height of 8Mtrs including necessary scaffolding complete all as specified and as directed
Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed.
S & F roof trusses (framed) trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces cleats etc confirming to grade Fe-410 W E250 quality A upto a height of 8Mtrs including necessary scaffolding complete all as specified and as directed.
Demolition wall and ceiling boards ( fiber pulp insullation etc ) or insullation boards / slabs, blankets any thickness including cover fillets upto a height of 8Mtrs including necessary scaffolding.
S & F Anodised aluminium snap grid frame work for false ceiling all as specified of grid size 605 X 605mm upto a height of 6Mtrs including M & L Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified upto a height of 8Mtrs including necessary scaffolding including complete all as specified and as directed.
S & F 4mm thick non asbestos fibre cement buildings 'E' boards fixed or laid/inserted to timber/GI/aluminium frame work in ceiling complete complete all as specified and as directed upto a height of 8Mtrs including necessary scafholding and formwork.
S & F in repairs 12mm thick perforated particle board/tiles for insulation and accaustic purposes, 60 x 60cm fixed with staples on snap grid with two coats of OBD over a coat of primer complete all as specified and as directed.
Demolition of un reinforced cement concrete in ground floors and paving n.exc 15 cm thickness (below & above ground level) complete all as specified and as directed.
M & L for providing cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in roof curves or muds, stops, rounded or chamfered on edges complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete complete all as specified and as directed.
M & L for glazed ceramic tiles, coloured, of size 300x 200x 6 to 7mm, as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering layer in cement mortar 1:4 complete complete all as specified and as directed.
M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering layer in cement mortar 1:4 complete complete all as specified and as directed.
M & L for Non skid ceramic tiles 7 to 8mm thick (square/rectangluar) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6. complete complete all as specified and as directed.
All as per item No. 37 above but each tile exc 0.11 Sqm but n.exc 0.18 Sqm.
M & L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) finished fair and even as in sub base flooring complete all as specifiead and as directed.
M&L for Granite(of any type) 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platorms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including 15mm thick screed bed and including dismantling of old one complete all as specified and as directed.
M & L for chequered cement concrete tiles size 30cmx30cmx20-25mm thick set, jointed and pointed with grey cement and pigment including 15mm thick screed bed in CM 1:4 complete complete all as specified and as directed.
M&L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base of floor all as specified and as directed.
Demolition of brick work or stone/boulders masonry built in Cement Mortar complete all as specified and as directed.
M & L for brick work in CM (1:6) using old size sub class 'B' bricks straight or curved on plan complete all as specified and as directed.
Taking down chowkats with shutter (without taking off shutters from the frame) n.exc 1.5 Sqm each complete all as specified and as directed.
All as per item No. 45 above but area exc 1.5 sqm but n.exc 4 sqm each.
Taking down shutters of any description n.exc 1.00 Sqm each complete all as specified and as directed.
All as per item No. 47 above but exc 1.00 Sqm and n.exc 2.00 Sqm each complete all as specified and as directed.
All as per item No. 47 above but exc 2.00 Sqm each complete all as specified and as directed.
S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, S & F in opening as per manufacturers instructions and as directed complete all as specified and as directed
Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame as per manufacturers instructions and as directed
S & F 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framedrebated on the solid,rounded or chamfered, puttogether with glue pinned at joints, complete including treating theback of chowkats with coal tar black paint.
S &F 2nd class hardwood 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.20 (a)
M & L for 35mm thick flush shutters, solid core constructions, with block board core and plywood face panels, commercial tyep on both sides complete all as specified and as directed.
S & F Factory made steel window, box type, using ERW hollow 'P' section, comprising double frame for and including gauged and glazed skeleton shutter, jointed internally with flat iron 40x4mm complete including grill/ guard bars of 8mm square bars fixed horizontally @100mm C/C including mild steel hinges, handles, tower bolts, stops, lugs etc, complete all as specified and as directed
S & F steel ventilator fixed type glazed bar complete all as specified and as directed.
S & F 2nd class hard wood in fillets, square, rectangular in section wrought, secured with nails sectional area exc 13 Sq cm and n.exc 25 Sqcm fixed in repairs complete all as specified and as directed.
S&F 19mm thick prelaminated particle board solid core construction with block board core and plywood face panels commericials type on both sides.
S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and as directed.
S & F in repairs 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and as directed.
S & F 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed all as specified and as directed.
S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised and fixed all as specified and as directed.
S&F MS butt hinge 100mm long medium weight, mild cold rolled mild steel, and fixed complete all as specified and as directed
S & F stainless steel butt hinges 100mm long with stainless steel hing pin complete all as specified and as directed.
S & F 300mm long MS ordinary rat tail rod pattern springs including roller & roller plate complete all as specified and as directed.
S & F in repairs 300mm long MS ordinary rat tail rod pattern springs including roller & roller plate complete all as specified and as directed.
M & L for preparation of new wooden surfaces of any description ,not other wise described over 10 cm width or girth applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M & L for preparation of new steel surfaces and applying 2 coats of synthetic enamel paint over a coat of red oxide zink chrome primer complete complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/Steel frames or stones, concrete or brick surrounds, glazed with putty or fixed with beads complete all as directed.
S & F 4mm thick sheet glass ordinary quality fixing with putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.
All as per item No. 70 above but figured glass, pin head type complete all as specified and as directed.
S & F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with galvanised wire staples complete all as specified and as directed.
S & F fixed in repairs galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with galvanised wire staples complete all as specified and as directed.
S & F MS framed work such as grills or grating etc with ends of bars welded of anysize and any design all as directed of Fe-290 Grade E-165 complete all as specified and as directed.
S & F mild steel flat iron hold fast of any size and similar articles conforming Fe 290 GradeE-165 complete all as specified and as directed.
M& L for PCC (1:3:6) type C0 using 12.5 mm graded stone aggregate as in lintels blocks, copings, etc for filling of back side MS chowkat etc complete all as specified and as directed.
S & F in repairs Aluminium Powder coated Curtain rod 25mm dia with brackets and side knob and fixing etc complete all as specified and as directed.
S & F in repairs 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms). complete all as specified and as directed.
S&F in repairs 15mm bore Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-110gms complete all as specified and as directed.
S & F in repairs 15mm bore bib taps, brass chromium plated, screwed down, screwed for iron pipe or for brass ferrule including flench as in repair complete complete all as specified and as directed.
S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm long all as specified and as directed
ditto- as per Item No 82 above but 600mm long complete all as specified and as directed.
S&F in repairs 32mm dia bore Waste coupling of PTMT for wash hand basin (half or full threaded) (Minimum weight 32mm45gms/40mm-60 gms) complete all as specified and as directed.
S&F in repairs 40mm dia bore Waste coupling of PTMT for Kitchen Sink (half or full threaded) (Minimum weight 32mm45gms/40mm-60 gms) complete all as specified and as directed.
S & F 15mm bore pillar taps brass chromium plated, screwed down, high pressure with or wihtout lettered hot or cold with long screwed shanks and fly nuts, screwed to iron pipe, fixed in repairs complete complete all as specified and as directed.
S & F in repairs 15mm bore chromium plated angle cocks/stop valves brass, screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union in repair complete complete all as specified and as directed.
S & F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete complete all as specified and as directed.
S & F in repairs vitreous china squatting pan 'Orissa pattern' size 580 x 440mm white with integral foot rest including replacement of 'P' or 'S' trap lime concrete bedding and making good floors complete complete all as specified and as directed.
S&F in repairs EWC Pedestal pattern WC ,any colour incl EWC seat Cover,10 ltr capacity PVC ,LLFC,32 mm dia PVC flush pipe including CP Toilet holder etc complete complete all as specified and as directed.
S & F in repairs PVC low level flushing cistern 10 litres capacity, syphonic action type, white, as approved including ball valve float valve and handle, flush pipe as in repair complete complete all as specified and as directed.
S & F in repairs vitreous china, wash hand basin white size 550 x 400 mm including brackets, chromium plated waste coupling & PVC waste pipe of 32mm dia complete complete all as specified and as directed.
S & F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste coupling and waste pipe complete all as specified and as directed.
S & F in repairs Plate rack made out of 1mm thick stainless steel of size 75cm X 75cm X 25cm with all internal fittings (as per sample) complete all as specified and as directed.
S & F in repairs chromium plated 125mm shower rose with or without swivel joints any size including fixing to steel pipe or union complete all as specified and as directed.
S & F in repairs 15mm bore concealed stop cock, chromium plated, cast copper alloy, screwed down with crutch or butterfly handle screwed both ends, as in repair including flench complete complete all as specified and as directed.
S & F in repairs chromium plated towel rail 600mm long, 20mm dia of a approved quality, complete complete all as specified and as directed.
S&F P V C (SWR) pipes of 110 mm bore single socketed in any length fixed to walls including taking down PVC pipe of any dia/type complete all as specified and as directed.
S&F P V C (SWR) pipes of 75 mm bore single socketed in any length fixed to walls including taking down PVC pipe of any dia/type complete all as specified and as directed.
S&F in repairs 75mm PVC (SWR) floor trap plain with grating incl jointing with solvent cenment complete all as specified and as directed.
S&F in repairs 110mm PVC (SWR) WC connector with lip ring complete all as specified and as directed.
S&F in repairs PVC (SWR) bends any radius 75mm bore provided with or without access door complete all as specified and as directed.
S&F in repairs PVC (SWR) bends any radius 110mm bore provided with or without access door complete all as specified and as directed.
S&F in repairs110mm bore PVC (SWR) vent cowl complete all as specified and as directed.
S&F in repairs PVC (SWR) junction single, (Single T) equal or un equal 110 mm bore of any radius with access door complete all as specified and as directed.
M&L for PCC 1:2:4 type B-1 using 20mm graded aggregate as in cills, coping steps, tank staging, sesmic and other similar courses, lacing courses parapet and railing upto 60cm ht kneeler kerb and alike including weathering, slightly rounded or chemfered angle and throating as directed.
S&F in repairs 150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. fixed in floor of size 140mm all as specified and as directed.
K LAKSHMAN SINGH AND CO
BEEGEE DESIGN SYSTEMS
LAKSHMI ENGINEERS
S.R.M.K Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .