PROVISION OF TEMPORARY PARKING SHED WITH INTERLOCKING PAVER BLOCK AT TRADE CENTRE NO 2 AT PARADIP

Amount

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in loose and soft soil complete all as specified and directed.

Excavation in trenches, n.exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying of cable, foundation of pole, stay assembly etc. n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out loose /soft soil complete all as specified and directed.

-Ditto- all as per item No-2 hereinbefore but depth exc 1.5m but not exc 3 m.

Removing excavated material to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

M &L for Hardcore of broken stone of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for PCC(Type D2) 1:4:8(using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M & L use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter fair finished surface complete all as specified and directed.

M & L use and waste of square rectangular or polygonal formwork to sides of pillars, posts, struts, piers, columns and stanchions fair finished surface complete all as specified and directed.

M & L for reinforced cement concrete for foundations Type B1 1:2:4 (20 mm graded stone aggregate), including rafts,footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M & L for reinforced cement concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) for Columns, pillars, piers, posts and struts complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Material and labour Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including complete all as specified and directed.

Material & Labour for (ISMC )Joist, channel, angle, or tee sections, fixed independently, without connecting plates, Fe- 290(Gde E- 165)etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed.

S & F Steel work in tubular trusses,vertical posts,rafter,purlins including special shaped washer,nut,bolts for fixing ,tapping, screwing,etc complete using ERW or induction butt weled tubes conforming to IS complete all as specified and as directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering ridge /cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F 16 to 20 mm dia Mild steel screw bolts (machine made) hexagonal or square heads at one end and screwed the other, or screwed both ends, eachscrewed end to be fitted with washers and one hexagonal or square nut, exc 22.5 cm exc 30cm long complete all as specified and directed.

S & F 11 to 15 mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

S & F Plates Fe -410-W(Gde-E-250) Quality -B (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

S &F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts Fe-290 (Gde E-165) complete all as specified and directed.

M & L for preparation of new steel suface of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:4 on fair faces of brick or concrete surfaces using Liquid water proofing compound as per manufacturers instruction of wall including finished even and smooth without using extra cement complete all as specified and directed. (Note : WPC Shall be meassured & paid separately as supply only)

Supply only Liquid water proofing compound complete all as specified and directed. (Make:Pidillite/Fosroc)

M & L for 150 mm thick PCC( 1:4:8) type D-2, using 40mm graded stone aggregate as in sub base of Paver block, complete all as specified and directed.

M&L for 80 mm thick coloured glazed rubber mould, pre coated interlocking or without interlocking paver block of any shape and size confirming to IS 15658-2006 with upto date amendments, M-40 Grade with grey cement with pigment laid over and including 30 mm thick river bed fine sand complete all as specified and directed.

M & L Preparation of newly plastered surface and applying three coats of white wash on wall complete all as specified and directed.

Material and Labour for point wiring complete with multi-stranded copper conductor 1.5 sqmm size PVC insulated unsheathed cable 1100 Volt grade, conforming IS 694 & colour code in conduit system of wiring, drawn in including medium grade PVC conduit not less than 20 mm dia concealed, including cutting chases and making good disturbed surface complete, including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified and as directed.

S&F Modular switch 1 way 10A, 1 module complete all as specified and as directed.

Supply and fix ceiling rose, surface bakelite,65 x 50mm, three terminals all as specified and directed.

S&F Modular White Cover Plate with Frame including metal flush box, 4 Module complete all as specified and as directed.

S&F Modular White Cover Plate with Frame including metal flush box, 6 Module complete all as specified and as directed.

Supply and fixing 1x 20 watt LED indoor box type surface / suspended industrial luminaire with aluminium housing with PC diffuser with LED Tube,Slim integrated design efficiency-125 lumen/watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable including taking down old light fittings complete all as specified and directed.( Make/Model No:-CCS-100-20-65-HL2-DP-NWH ( BRIGHT LINEA) of Crompton or equivalent in make Phillips/ Havells/C&S/Bajaj )

Supply & fixing in Building security light fitting, new compact designed IP 66, Aluminium PDC housing with toughen glass cover high power LED street light/Building Security light of capacity 30 watt. including provn of necessary connection complete.(Make/ Model:- Crompton (ASTRA NEO), Cat No . LSTS-30-CDL-M or equivalent in make Philips/Havells/ Bajaj/C&S)

Supply and fixing Factory made sheet metal enclosure for DBs Double door (Fixed flush to the wall), SPN, 240 volt, 8 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete all as specified.

Supply and fix MCB single pole and neutral, 240 volts, 32 to 40 amps breaking capacity 10KA, ‘C’ Series. etc , complete all as specified and directed. Make : Legrand /Siemens/Schneider

Supply and fix MCB single pole 240 volts, 6 to 32 amps, 50HZ, 10 KA. , ‘C’ series all as specified and directed.

Supply and fixing of GI pipe Bracket of 40 mm dia light grade pipe bend to shape of approx length 1.5 Mtr including 2 no. MS Clamp of flat iron size 40x6 mm complete with nut, bolt, washers complete all as specified and directed. (Make of GI Pipe - Jindal/Prakash/Tata)

M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to earth lead wire of GI wire 4mm dia by means of nuts/bolts and washers, check nuts and washer of galvanized iron or steel including 15 mm dia GI pipe light grade upto 1.5 mtr below ground level for protection pipe ,excavation and earth work charcole dust, common salt PCC 1:3:6 type C-I using 20 mm stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type BI using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handle 12 mm dia, round ,PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate no 3 of SSR Part I of 2009 and connected to earth test point incl testing complete all as specified and directed . Note :- Cost of earthing strip & GI pipe 25mm up to 7.5 m shall be included in cost of above item.

S & F 4 mm dia GI wire to connect building earthing to MCB DB Box complete all as specified and directed

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 3.5 core complete all as specified and directed.

Supply and laying Sand coarse dry as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 cm (15 cm under the cable & 8 cm over the cable) and gently punned down to 18 cm thickness complete all as specified and directed.

M&L for well burnt sub class ‘B’ bricks (using old size brick) laid in trenches above sand cushioning for cable protection complete all as specified and directed.

PABITRA MOHAN PARIDA

RANA ENTERPRISES

SWAIN ENGINEARING

M/s RABINDRA KUMAR MALLICK

M/S ABHISHEK JENA