Optimization of air conditioning system at ITPO Pragati Maidan,New Delhi.

SH-1(Design and Installation)

Study and Design for combining Carrier make 4x450TR ,York make 2x300TR and Trane make 3x250TR HVAC plants with preparation of Concept design,SLD,calculation of sizes and other specifications for Chilled water header and line,condenser water header and line,de-coupled line,Chilled water line from Carrier plant to existing York Plant and Trane Plant rooms,Pumps,Valves with all accessaries etc. for the scheme so as to achieve optimized life cycle cost with better utilization of standby capacity available at Carrier plant.

Providing, installation,Testing and commissioning following euipments with all necessary activities/works complete in all respect as per the design submitted vide item No 1 of this work and approved by competent authority etc. as required.

CHWP 800 GPM suitable head in York Plant room

200 mm NRV for CHWP

200 mm Butterfly Valve for CHWP

200 mm Y Strainer for CHWP

SITC of following sizes of MS "C" Class Pipe/valves complete with all filltings, Support duly insulated,wherever required suitable deep excavation and refilling of trench with making good the damages, PUF Insulation ( 32kG/m3 ) alongwith Fibre Glass & StarBond Shall also be used for external application whereas Nitrile Rubber / XLPE ( 32mm ) shall be used for internal application complete etc as required.

SITC of following size of CHW Pipe at required location

450 mm dia 7mm thick CHW Pipe

300 mm dia 7mm thick CHW Pipe

250 mm dia 6.35mm thick CHW Pipe

200 mm dia 6.35mm thick CHW Pipe

150 mm dia 6.35mm thick CHW Pipe

SITC of following size of CHW Pipe at required location

150 mm Plant Isolation Valve

200 mm Plant Isolation Valve

250 mm Plant Isolation Valve

350 mm Plant Isolation Valve

SITC of Balancing Valve

250 mm Balancing Valve for Plant

350 mm Balancing Valve for Plant

SITC of following size of Condenser Pipe at required location.

500 mm, 7mm thick CWP Pipe

300 mm, 7mm thick CWP Pipe

200 mm, 6.35mm thick CWP Pipe

100 mm, 6.35mm thick CWP Pipe

Starter Panel for York Plant CHW Pump

Temperature Gauge

Pressure Gauge

Automatic Purge Valve

25mm Drain Valve

Shifting of 2 Nos Trane Chillers alongwith Electrical Panel, CHWP, CWP etc. including dismentalling and re-installation by Providing and Making suitable Foundations,antivibration arrangements,Electrical Connections for Chillers,Pumps etc. by providing suitable size and length cables,end terminations etc. and Recommissioning of Chillers,pumps etc. as an integral part of the scheme.

Shifting & Reinstallation,Recommissioning of Cooling Tower for Trane Chillers along with Electrical Panel etc. including dismentalling and re-installation by Providing and Making suitable Foundations,Electrical Connections etc. by providing suitable size and length cables,end terminations, repair inclding replacement of brocken header,nozels,other accessaries etc. complete as required.

Recommissioning,resetting,balancing of entire system in integrated mode including providing data such as chilled water,condenser water flow rates,operating points for varios equipments,doing seasonal tests during summer and Monsoon etc. complete as required.

SH-2(Dismantling and buyback)

Dismantling and buyback of following equipment with accessaries including making good the damages etc as required.

Buy-Back (ie minus)Amount of Trane Chiller.

Buy-Back (ie minus) Amount of Trane Primary CHWP.

Buy-Back (ie minus) Amount of Trane CWP.

Buy-Back (ie minus)Amount of York Chiller.

Buy-Back (ie minus) Amount of York Primary CHWP.

Buy-Back (ie minus) Amount of York CWP.

Buy-Back (ie minus) Amount of York Elect Panel

Buy-Back (ie minus) Amount of CT, Piping, Valves & Accessories

S G TECHNOFAB PVT LTD

Supertech Engineers

Accurate Engineers

Arctic Engineering Services

SHES Air And Automation

swastik airconditioning co

snowmex engineers ltd

Powermech Services Private Limited