REPAIR/MAINT OF SHORT RANGE AND SINGPUR, BRAVO FLT FENCING AND E/M WORKS AT AF STN GWALIOR

Amount

Cutting of all bushes ,grass and sarcandas, shrubs, vegetation etc including trees n.exc 30 cm girth and removing the material exc 500m and n exc 1 KM complete all as specified and directed.

Ploughing to existing ground with mechanical devices n.exc. 20cm in depth spill cross (double) or both way and leveling the target area with surrounding area soil complete all as specified and directed. Note : For ploughing to existing ground, both side (ie one side and cross) shall be measured one complete operation.

M&L for Supply of Saw dust and mixing with sand in particular ratio as per user requirement for spreading on Fd Target target area complete all as specified and directed. Note: Supply of Sand and Filling of Mixture on Fd Target Area shall be measured and Paid Searately.

Supply only Sand (passing through 4.75 mm IS sieve) for Fd Target area/ Firing Butt all as specified and directed by Engr-in-charge.

Forming earthen band above ground level including raising of sand and saw dust mixture, ramming and finishing of top surface up to a height ot 6 mtr manually or machenically in required slope at target area as per user requirment complete all as specified and directed by Engr-in-charge. (Note:- Before laying of sand and saw dust mixture the existing ground should be loosened and sieving through 4.75mm shieve for extraction of fired bullets remnants

M&L for PP (poly propylene) woven bag of bright white colour 30 Kg capacity (Approx) by filling with sand/soil and laying at site as per user requirement complete including removing old deteriorated bags from site out of defence land all as specified and directed by Engineer-in-Charge. Note :- Sand / Soil for filling is available at site.

Demollition of cement concrete (unreinforced) including floor tiles, ground floors and pavings n. exc 15 cm thick below or above G.L complete all as specified and directed.

M&L for Cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in floors, plinths, kerbs, haunching, rounded or chamfered on edges, coping , floor finishes etc incl necessary form work complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B0 (12.5 mm graded stone agg) as in sub base of flooring for levelling course complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( backing, screed/plaster) any number of layers), rubbish off the premises.

M&L for non skid coloured ceramic tiles 7-8mm thick area of each tiles exc 0.06 Sqm but not exc 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement including 10mm thick rendering on brick work or concrete surface other than fair faces in CM 1:4 complete all as specified and directed.

M&L for 7 to 8 mm thick Non-skid ceramic premium tiles, matt finish, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement match with tiles over 15mm thick screed bed in CM 1:6 to complete all as specified and directed.

All as per item No.13 here in before but as in skirting etc. but over 10 mm thick rendering or bedding in layer of mortar fo in cement plaster 1:4 complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and mirror polishing over 15mm thick screed bed in CM 1:4 to complete all as specified and directed.

M&L for 10mm thick designer parking/foopath vetrified tiles of size 300x300mm any colour and pattern, jointed and pointed on neat cement slurry as in floors including 20 mm thick screed bed in CM (1:6) complete all as specified and directed.

Demolition of stone slabs and interlocking tiles of any description or thickness in floors, aprons etc laid in any type of mortor complete all as specified and directed.

M&L for 16-18 mm thick Granite (of any type) work (table rubbed and polished) in floors, steps, pillar, platform or oval shape wash hand basin including cutting to fit the WHB, partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L PCC 1:5:10 Type E2 ( using 40mm graded stone aggregates) as in sub base complete all as specified and directed.

M&L for 80mm thick factory made cement concrete paver block with approved colour, design & pattern as in footparth, parks, lawns, drive ways or parking etc, over and including 20mm thick compacted bed of fine sand/stone dust compacting, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

All as per item No 20 above but 60mm thickness.

All as per item No 20 & 21 but except paver blocks refixing only.

M&L for factory made kerb stone of cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

S&F 4mm thick HPSC pre-prime non asbestos fibre cement building board (E-classic) decorative finish including E-grid suspended false ceiling grid system 600x600mm with main runner 33x24x0.6mm, cross tee 25x24x0.6mm and wall angle 19x22x0.4mm ceiling suspended with 4mm dia GI wire hanger fixed with steel dash fasteners to RCC Roof or from purlin with butterfly clips hold down clips etc from soffit at approx 1.20mtr centre to centre including dismantling of old unserviceable false ceiling with grid any discription complete all as specified and directed.

S&F in repairs 4mm thick HPSC pre-prime non asbestos fibre cement building board (E-classic ) sheets decorative finish to existing false ceiling grid complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 M mean radius built in CM (1:6) complete all as specified and directed incl demolition of brick work or stone masonry of any description and in any position built in cement mortar including all quoins, arches pillar etc including disposal of rubbish complete all as specified and directed.

All as per item No. 26 here in before but except bricks.

Taking down cement or lime plaster on brick or stone masonry, etc. including raking out joints, hacking for key and scrubbing down with water, etc complete all as specified and directed.

M&L for 15mm thick rendering on brick masonry walls in CM 1:6 finished even and smooth without using extra cement on brick surface or concrete, etc complete all as specified and directed.

M&L for Preparation of newly plaster surface of wall and applying two coat of distemper oil emulsion over a coat of primer white or tinted as approved all as specified and directed.

M&L for Preparation of newly plastered surface and applying two coat of weather coat exterior emultion white or tinted over a coat of primer as approved complete all as specified and directed.

Taking down shutters of any description exc 1Sqm but n. exc 2 Sqm each complete all as specified & directed.

Taking down chowkats with shutters (without taking off shutters from the frames) of any description n. exc 1.5 Sqm each complete all as specified & directed

Taking down chowkats with shutters (without taking off shutters from the frames) of any description exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified & directed

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with galvanized wire staples/ wooden beading to wooden/steet window/vents complete all as directed.

M&L for preparing of new wood surface of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and dircted.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), With Wood free EPS with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

S&F 100 mm Butt hinges, medium weight, stanless steel, fixing with zinc coated svrewa complete all as specified and directed.

S&F 100mm Extruded aluminium alloy fabricated handles (D Type) fixed to door /windows shutter with sctewscomplete all as specified.

S&F 100 Aluminium, barrel tower bolts of extruded section and fixed to door/ window shutter with sctews complete all as specified.

S&F Powder coated aluminium frame for door, window, ventilators and partitions with extruded built up standard tubular sections with necessary jointing aluminium cleats using C.P./ stainless steel screws, all as specified and directed by Engr-in-Charge.

S&F Powder coated aluminium door shutters with extruded built up standard tubular sections using aluminium sec not less than 1.50 mm thick, (shutter with styles 85mmX44.45mm, top rails 83.5mm X 44.45mm, intermediate rail 83.5mmx44.45mm, bottom rail 114.3mmx44.5mm) jointed with jointing cleats, nut bolts and screws including rubber neoprene gasket and aluminium beading for fixing glass & ACP Sheet complete, all as specified and directed by Engr-in-Charge.

S&F Powder coated aluminium sliding windows shutters with extruded built up standard tubular sections (using aluminium sec not less than 0.75mm thick), fixing to frame includig rubber neoprene gasket and aluminium U channel, 02 Nos sliding rollers at bottom, locking arrangement to each shutter using C.P./ stainless steel screws, all as specified and directed by Engr-in-Charge.

S&F 5mm thick tinted glass, and glazing in squre/rectangular aluminium shutters/frames complete all as specified and directed.

S&F 3.5mm thick tinted glass, and glazing in squre/rectangular aluminium shutters/frames complete all as specified and directed.

S&F 4mm thick ACP (Aluminium composite pannel) coloured sheet with aluminium coil, sandwitch pannel as in aluminium doors/wall claddings with sealent and necessary hidden screws complete all as specified and directed. Make:- REYNOBOND, ALUDECOR, ALSTRONG, ALSTONE, ALEXPANEL.

S&F 150mm long Extruded aluminium alloy handles, fabricated type, complete all as specified and directed.

S&F 150mm long aluminium barrel tower bolts, of extruded section complete all as specified and directed.

S&F 16mm dia, 250 mm long aluminium alloy, anodised , sliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy and fixed complete all as specified & directed.

S&F mild steel Butt hinges,100 size fixed to door shutter & chowkats with zinc coated screws complete all as specified and directed.

S&F in repair rubber neoprene packing to aluminium door and windows including removing glass, beading and refixig the same in its position complete all as specified and as directed.

S&F in repairs 5mm thick glass, and glazing in squre to aluminium frame with suitable beading in each pane complete all as specified and as directed..

S&F in repairs 3mm thick sheet glass, ordinary quality and glazing with oil putty n exc 0.50 Sqm in each pane complete all as specified and as directed.

S&F in repairs 18mm thick Rajshri PVC Celuka ply of both side laminated wood grain to make cub board/cabinet shutter/drawer front shutters complete as per specifications and as directed by the Engr in charge.

S&F 100mm Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete as per specifications and as directed by the Engr in charge.

S&F Stainless steel handles 100 mm size decorative type for kitchen cabinets/ cub boards shutters as per specifications and as directed by the Engr in charge.

Supply and fix continuous (piano) hinges, mild steel, bright finish or electro galvanised, 30mm wide flaps when opened complete all as specified and directed.

S&F in repair 10 litre capacity PVC valve less symphonic action type flushing cistern low level , white, with inlet, ball valve, float and handle including brackets and Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), P- Type/ S-Type any colour (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed.

S&F in repairs PVC Seat cover for water closet pan (pedestal pattern), matching colour including fixing bolts. Make: Hinware, parryware & Cera etc

S&F in repair Vitreous China urinals half stall flat back white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinals to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe and 32mm dia Brass CP waste coupling with PVC waste pipe & Grating complete all as specfied and directed.

S & F in repair vitreous china wash basin, white, flat back size 550 X 450mm including 32mm Brass CP waste Coupling, PVC Waste pipe and Grating complete all as specified and directed.

S&F 15mm bore medium grade galvanized iron tubing with all fittings e.g. socket, union, nipple etc. including cutting of pipe in required size , making threads etc. including taking down old unserviceable pipe, complete all as specified and directed.

S&F 20mm bore medium grade galvanized iron tubing with all fittings e.g. socket, union, nipple etc. including cutting of pipe in required size , making threads etc. including taking down old unserviceable pipe, complete all as specified and directed.

M&L for Cutting chases for concealed water tubing or concealed conduit wiring, etc. making good to facings where required and pointing in cement mortar 1:3 not exc 10 cm girth complete all as specified and directed.

S&F in repair for 110 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor or in wall complete all as specfied and directed.

S&F in repair for 75 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor or in wall complete all as specfied and directed.

S&F in repair for 50 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor or in wall complete all as specfied and directed.

S&F 110mm PVC(SWR) bends complete all as specfied and directed.

S&F 75mm PVC(SWR) bends complete all as specfied and directed.

S&F 50mm PVC(SWR) bends complete all as specfied and directed.

S&F 110mm PVC(SWR) junction single, (Single T) eual or unequal complete all specfied and directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S&F in repair chromium plated fency type bib taps long body cast copper alloy with capston head handle screwed down screwed for iron pipe or for brass ferrule & fixed in 15 mm bore pipe complete all as specified and directed.

S&F in repair 15mm bore pillar taps, fancy type, chromium plated screwed down high pressure with or without lettered with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs Brass CP, fancy type 15mm bore two way Angle Cock with crutch or butterfly handle, screwed both ends for iron pipe.

S&F in repairs Brass CP, fancy type 15mm bore Angle Cock with crutch or butterfly handle, screwed both ends for iron pipe.

S&F in repair for PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repairs Brass CP Jet spray for fixing to pedestal pattern Water closet complete all as specified and directed. .

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.00 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and directed.

S&F in repairs Brass CP, fancy type 15mm bore Cocealled stop cock with crutch or butterfly handle, screwed both ends for iron pipe.

S&F in repairs Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) and Shower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour.(Minimum weight 40gms)

S&F in repair lookig mirror, bevelled edge of size (900 mm x 600 mm x 6 mm) having four holes at corners fixed to walls with CP Brass screws with fancy type head top coplete all as specified ad directed by Engr-in-Charge.

S&F 500 lit capacity rotational moulded ploythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position with 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed including Dismantling of old PVC water tanks with float valve complete all as specified and directed.

S&F in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with necessary beading and nut bolts to steel windows/vents etc complete all as specified and as directed.

Cleaning sewage line, rodding thoroully, watering complete removing blokages all as specified and directed.

Cleaning man holes, up to 1.5mtr depth, removing sludge, watering complete all as specified and directed.

Demollition of cement concrete (unreinforced) as in roof with old APP membrane and screed plaster and in any position not otherwise, other than ground floors and removing the demolished material out of MoD land complete all as specified and directed .

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in and levelling course etc over roof surface complete all as specified and as directed.

M & L for 10 mm thick screed bed in cement mortar 1:4 mixed with using liquid water proofing compound as per manufacturers instructions (Note:Water proofing compound shall be measured and paid seprerately under respective item of "BoQ")

S&F APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid over hot blown bitumen grade 85/25 conforming to IS-702 @ 1.2 Kg/Sqm over primed surface with bituminous primer @ 0.30 liters/Sqm surface by forced application complete all as specified.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for Applying a coat of aluminium paint over APP membrane surface complete all as specified and directed.

M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish including minor repair work and filling the joints with cement and pigmet etc complete all as per directed by Engr-in-charge.

M&L for Stamped concrete 75mm thick in PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in floors/path (any design) using necessary designer stamps and necessary pigments with using extra cement complete all as specified and directed by Engr-in Charge. Note:- Design as approved by GE

M&L for Preparing old painted wooden surfaces and applying one coat of synthetic enamel paint of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

M&L for Preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Preparing old decorated plastered or unplastered surfaces of external walls and applying one coat of weather coat exterior emulsion paint including filling cracks/depressions with putty/POP to make the adjacent surface even and smooth complete all as specified and directed.

M&L for Preparation of old decorated surface of wall include brooming down with steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, including filling the cracks and depressions and applying one coat of distemper oil emulsion by roller complete all as specified and directed by Engr-in-Charge.

M&L for Preparation of old decorated surfaces of wall removal of nails, loose layers, rubbing with sand paper etc & filling cracks/hole with wall care putty and applying one coat of white wash complete all as specified and directed.

Ditto as per item No 104 above but on ceiling surface complete all as specified and directed.

M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, and prepare the surface by filling the cracks/ depressions with wall putty/POP to make the surface even and smooth and applying two coats of exterior emulsion weather coat in camouflaging pattern on CCD scheme (Pattern as approved by GE & User) on surfaces of any type of buildings up to any height, including necessary scafolding complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F MS steel sections ( angle, flat, MS plate/ sheet, bars etc) as in gates, door frame, window grills, hung type grilled gates, grating,etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters, including MS hinges/ pintle hinges, stops, hand-made sliding bolts, etc. railings, framework of watertanks and similar work conforming to Fe.290.Gde-E-165.

S&F mild steel Tubular steel sections for shed, trussed, rafters, purlins, vertical post and fastenings and framing jointed with angle cleat, MS Flat MS plates clutting, welding necessary drilling holes and distance pieces, cleats etc. complete all as specified and directed. Make: ISI Marked as approved by GE.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick AZ 150, of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including Dismantling of existing Plain or corrugated steel complete all as specified and directed.

M&L preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling of posts, struts (wood, steel or RCC) any section including taking out embedded portion in concrete or brick masnory of any position place incl swan neck fencing and making good disturbed portion removing excavated debries up to a distance n.exc 50M complete all as specified and as directed by Engr-in-Charge.

Fixing only in repairs of 4mm dia chain link fencing, of mesh (50mmx50mm) size, of any type to angle iron with MS Flat Iron, and fencing will be strengthened by fixing MS flat/round bars horizontally complete all as specified and directed. Note: (i) S&F of FI, Angle, round bar & bolts shall be measured and paid separately. (ii) Supply only of chain link fencing shall be measured and paid separately.

Supply only 4mm dia galvanised steel chain link fencing of mesh size 50mmx50mm with both ends of the fabric without knocking and twisting any size complete all as specified and directed.

S&F flat Iron, mild steel for securing chain link fencing, wind tie, welded to each other complete all as specified and directed by Engr-in-Charge.

S&F of mild steel screw bolts (machine made) 10 to 15mm dia of neck and length exc 5cm but n'exc 10cm, with hexagonal or square heads at one end and screwed ends fixed with two washers and one nuts complete all as specified and directed.

S&F in repairs galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and including galvanised MS wire, staples or steel pin etc complete all as specified and directed. Note :- Each line of wire to be measured.

M&L for mild steel angle Iron fencing post including cutting and welding tops to shape as directed, drilling holes, notching for wire etc fillets including necessary drilling, bolting or riveting and similar works, conforming to Gde-165 complete all as specified and directed. Make: ISI/BIS Marked As approved By GE.

Excavating in post holes (or similar holes) each n. exc 0.25 cu. m, getting out and removal of excavated earth up to a distance of 50 mtr complete all as specified an direced.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in foundation, filling fencing post and mass concrete, sub base finished even and smooth without using extra cement including necessary formwork complete all as specified and directed.

S&F in repair concertina rozor wire coil 600 mm dia (cross type) hot dip galvanized steel wire of high tensile spring centre core wire, High carbon spring steel wire, heavy zinc coated in fencing work complete all as specified and directed.

S&F in repair concertina rozor coil 1000 /1050 mm (cross type) dia hot dip galvanized steel wire of high tensile spring centre core wire, High carbon spring steel wire, heavy zinc coated in fencing work complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete,(fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L for point wiring with stranded copper conductor 1.5. Sqmm 1100 Volts grade FRLS PVC insulated and unsheathed including ISI marked PVC casing capping of required sizes as indicated including all accessories, copper conductor cable 1.5 Sqmm insulated and unsheathed PVC cables as earth wire, modular terminal boxes closed recossed type. PVC modular board all as required as specified and directed for the following :- (a) One light/ Fan point controlled by one way switch.

(b ) One 5 Amps switch socket combination on independent board.

(c) One 5 Amps socket on same board with other switches.

All as per item No 124.00 here in before but 2.5 Sqmm stranded copper conductor and independent board for 15 Amps switch/ socket point as directed.

S&F in repairs Modular switch 1 way 6A, 1 module single pole 230 V ISI marked complete all as specified and directed..

S&F in repairs Modular type switch socket out let 3 pin 6 Amps flush type 230 Volts multipurpose, ISI marked complete all as specified and directed.

S&F in repairs Modular type switch socket out let 6 Amps and 16 Amps multipurpose( 3 Pin 16 Amps and one pin 6 Amps controlled by one switch) ISI marked complete all as specified and directed

Supply, Laying & connecting cable 1100 Volts grade, stranded aluminum conductor, screened, XLPE insulated, armoured shielded and PVC sheathed cable of 4 Sqmm x 2 core sizes conforming to IS 7098 (Part-I) amended upto date and incl taking down of old u/s cable complete all as specified and directed. Note :- (i). Lugs/Glands/saddles of suitable size required for fixing of cables in panels/junction boxes /on walls shall be included in the item rate.

M&L for sub main wiring in replacement of using two single core PVC insulated, unsheathed stranded copper conductor cable of size 4 Sqmm FRLS of voltage rating upto and including 1100 Volts drawn in existing conduit along-with one run of PVC (Green colour) insulated , unsheathed, stranded copper conductor of size 4 Sqmm as earth continuity conductor and incl taking down existing unserviceable submain wiring complete all as specified and directed. Note:- Two run of single core PVC cable with one run of earth conductor shall be measured as one unit. (ii) Cost of making good to the disturbed surface to match with the existing is deemed to be included in the quoted rate.

Supply, fixing in repair, connecting & testing of sheet metal enclosures double door (IP-42 Protection), triple pole and neutral, 12 way DBs Vertical tipe for using MCBs / MCB isolators with having aluminium bus bars suitable for 200 Amps rating complete all as specified and directed.

All as per item 131.00 here-in-before but distribution board single pole and neutral, 12 way complete all as specified and directed.

All as per item 131.00 here-in-before but distribution board single pole and neutral, 4 way.

S&F in repair MCB SPN, 32 Amps, (`C’ series) 415 volt current rating and ultimate breaking capacity Icu = 10 KA with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed.

All as per item 134.00 here-in-before but MCB single pole, 6 to 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.

Supply and fixing in repair curve miniature circuit breaker MCB TP, 63 Amps (`C’ series) having current rating 10 KA, 240V and current carrying capacity in the DB complete with connection testing and commissioning.

Supply& Fixing in repairs LED Batten T/L fittings 1x20 Watt complete with round block etc, incl PVC gutties and flexible wire and connecting to ceiling rose complete all as specified and directed.

Supplying, fixing in repair & testing in replacement decorative recessed mounting 36 watt LED full out put luminaries which provides soft light glare free symmetrical illumination suitable for Armstrong/Grid ceiling, white powder coated sheet steel housing with paralite P5 square parabolic louver block in metallic perforated frame for low glare, aluminium reflector and accessories ,connecting the same to electric source with and including copper conductor 23/0.0076 flexible twisted twin core cable, including all accessories and fixing arrangements for fixing the light fitting to false ceiling complete all as specified and directed.

Supply and fix in replacement of triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 32 Amps all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of LED street/security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fix GI bracket made out of 40 mm bore GI pipe light grade ISI marked, 1.2 long bent to shape suitable for fixing of street light fitting including with 2 Nos MS clamps made with 40x3 mm flat iron, bolts, nuts, washers etc including two coats of synthetic enamel paint over one coat of zinc chrome primer and fixing on electric pole complete all as specified and directed by Engineer-in-Charge.

Supply and fix weather proof thermo plastic (Polystyrene) SMC cable junction box, having protection class IP-66 and overall size 210mmx155mmx92mm having metric knockouts on the wall, three phase complete with bakelite connector 4 Nos 20 Amps busbar capacity 4 way, MCB SP 6 Amps capacity with necessary fixing arrangements by providing MS clamps 02 Nos made out of MS flat 25x3 mm painted with one coat of primer & two coats of paint including nuts and bolts etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair ceiling rose surface backelet ISI marked , 2 to 3 terminal all as specified and directed.

M&L for preparation of old painted surfaces of LT steel tubular pole/strut, of any description and in any position 9.00/8.50 Mtr height and scrapping of pole with emery paper and applying one coat of aluminium paint on all the metallic surfaces including protection pipe, cross arms, clamps, GI pipe bracket of street/security light, anti climbing devices etc and providing three Nos radium band strips, strip marking in alternate layeres of 30 cm black and 30 cm yeallow from base/PCC to a height of 1.5 mtr Sirelly numbering with black and white colour and painting white cement base paint for PCC/Coping complete all as specified and directed.

M/S YOGANSH CONSTRUCTION CO.

M/S NIRMAL SINGH DHANJAL

Jai Mahakaal Construction