8125/SAR-T-13/2025-26 PROVN OF VEHICLE SERVICING SHED AT MTR AND S SECTIONS AT AF STN SARSAWA UNDER GE (AF) SARSAWA

Amount

Excavation in trenches for foundation etc not exc 1.5m wide and not exc 1.5 m in depth in any type of soil complete all as specified and directed.

Returning filling in including spreading levlling ,watering and well ramming in layers nexc 25cm thick complete all as specified and directed.

Removal of excavated material to a distance nexc 50 m and depositing at a level nexc 1.5 m above the starting point complete all as specified and directed.

M & L for cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) as in foudation, filling, sub base and mass concrete complete all as specified and directed.

M & L for cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foudation, filling, sub base and mass concrete complete all as specified and directed.

M & L for brick work in cement mortar (1:6) Brickwork with old size bricks, straight or curved on plan exc 6m mean radius, built in complete all as specified and directed.

M & L for hardcore of gauge n exc 63mm , deposited , spread and levelled in layers n exc 15cm thick watered and rammed to a true surface complete all as specified and directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of concrete surfaces in cement mortar (1:4) and finished smooth and even without using extra cement complete all as specified and directed.

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished smooth and even without using extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M & L for preparing new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls complete all as specified and directed.

M & L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemperover one coat of wall care putty (not less than 1mm thick) after preparation of surfaces complete all as specified and directed.

Demolition of cement concrete (un- reinforced) in Concrete in ground floorpavings n exc 15 cm thickness (below or above ground level) and removal of rubbish materials complete all as specified and directed.

M & L for 25mm thick cement concrete (1:2:4), type B1 (using 20mm graded crushed stone aggregate) as in levelling coarse for tiles complete all as specified and directed.

M & L for vitrified ceramic tiles 10mm thick (square/ rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6) complete all as specified and directed.

M & L for vitrified ceramic tiles 10mm thick (square/r ectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in cement & sand mortar (1:4) complete all as specified and directed.

M & L for glazed ceramic coloured tiles in vertical surfacaes 350x250x7mm/450x350x7mm thick set set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment including 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar (1:4) and finished even and fair for receiving tiles complete all as specified and directed.

M & L for providing and laying prepolished cement concrete Chequered tiles 30cmx30cmx25mm thick, with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape heavy duty , set,jointed and pointed in neat cement slurry in floors over screed bed 15mm thick (1:6) cement mortar complete all as specified and directed.

M & L for 100 mm thick PCC (1:4:8) type D -2 (using 40 mm graded stone aggregate) as in sub base of path/ hardstanding complete all as specified and directed.

M & L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed

M & L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 Complete all as specified and directed.

S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment AFe- 290(Gde E-165) on any hight complete all as specified and directed.

S & F Mild anchor bolts any dia & of any length for plate and template purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and directed.

M & L for painting to new or previously untreated steel surfaces of any description over 10cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chromic primer including preparation of surfaces complete all as specified and directed.

M & L for TMT steel bars 10mm dia and over cut to length bent to shape reqd incl cranking bending spirally for hooping for columns hooking ends and binding with m.s wire annealed not less than 0.9mm dia complete all as specified and directed.

S & F Barbed wire, galvanised, 2 strand,2.00mm dia barbed at 75mm spacing complete all as specified and directed.

S & F chain link fencing 75X75mm mesh with 4.00 mm dia mild steel galvanised wire, complete all as specified and directed.

Fixing only fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

M & L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

M & L Pre- painted galvatume aluminum zinc coating GI based Semi-corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed.

M & L for point wiring in stove enamelled steel conduit not less than 20 mm dia complete with PVC insulated and unsheathed FRLS cable 1.5 Sqmm (nominal area) with multui standard copper conductor single core 1100 volts grade including modular type PVC rectangular block of suitable size and plate and frame of modular type incl 1.5 Sqmm multi standard FRLS copper conductor cable of green colour as continious earth wire with lugs and accessories and making good disturbed surfaces of wall/ floor etc complete all as specified and directed for the followings:- (a) One light / fan point controlled by one way switch

(b) All as per Item No 32.00 here-in-above but for 5 Amp socket outlet on the independent board complete all as specified and directed.

(c) All as per Item No 32.00 here-in-above but for 5 Amp socket outlet on same board complete all as specified and directed.

(d) All as per Item No 32.00 here-in-above but using 2.5Sqmm single core multi standard copper conductor PVC insulated and unsheathed FRLS cable 15 Amp socket outlet on independent board including 2.5 sqmm multi standard FRLS copper conductor cable of green colour as continious earth wire with lugs and accessories and making good disturbed surfaces of wall/ floor etc complete all as specified and directed.

S & F ceiling rose surface bakelite 63 x50mm three terminals complete all as specified and as directed.

S & F socket outlet 6A/16A-2/3 pin combined 2 module modular type complete all as specified and directed.

S & F socket outlet 6A- 2/3 pin combined 2 module modular type complete all as specified and directed.

S & F switch 6 Amps modular type one one way complete all as specified and directed.

S & F switch 16 Amps modular type one one way complete all as specified and directed.

S & F LED type flood light 50 Watt, 230 volts AC outdoor type with IP 65 class protection with aluminium die cast housing glare free light distribution impact and corrosion resistant operating voltage range 140v to 270v, total lumen efficency = 80 Im/watt, THD < 20 CRI > 80, colour temperature 6500K, inbuilt surge protection = 5Kv, 50000 Hrs burning hours complete all as specified and directed.

S & F LED type flood light 150 Watt, 230 volts AC outdoor type with IP 65 class protection with aluminium die cast housing glare free light distribution impact and corrosion resistant operating voltage range 140v to 270v, total lumen efficency = 80 Im/watt, THD < 20 CRI > 80, colour temperature 6500K, inbuilt surge protection = 5Kv, 50000 Hrs burning hours complete all as specified and directed.

S& F MCB SP 5 to 40 Amps, 240 volts curve 'D' breaking capcity of 10 KA complete all as specified and directed.

S & F double door, three phase distribution board 4 way, IP 5400 lodline VTPN with 100 Amp MCCB to be used as incommer and made out of CRCA shouls 15 mm thick phosphatised powder coated wirh copper bud bar 250 Amp, 415 Volts, Earth Stud Dip Ras, Polymide terminal blocks for incomming and outgoing circuits, inbuilt loose wire box ground curminat blocks duly prewired with thimbled Rame retardent copper conductors and poly layer for protection complete all as specified and directed. Note: (a) Rate of MCCB and MCBs are included in quoted rates, capacity of single pole MCB shall be provided as per requuirement and direction. (b) Make of MCCB/ MCB and DB should be same.

S & F of wall mounted air circulator fan of capacity 600 mm sweep including copper wound motor, metalic body, 50 Hz, 240 volts, including all fittings/ accessories and fitting/ welding at site complete all as specified and directed.

Supply and laying and testing of XLPE cable insulated screened, PVC galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts grade with standard aluminium conductor of size 25 Sqmm, 4 Core complete all as specified and directed.

M & L for boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of size 25 mm dia suitable for 4 MPA working presure complete all as specified and directed.

RAJAN TRADERS (BID ID -3340911)

M/S CHOPRA & COMPANY (BID ID -3340213)

SUBHASH CHAND CONTRACTOR (BID ID -3341068)

NAQLI LAL SHARMA AND ARUN SHARMA (BID ID -3342019)

G.H. INFRASTRUCTURE PRIVATE LIMITED (BID ID -3341367)

SINGH CONSTRUCTION CO. (BID ID -3350408)

RADHA ENTERPRISES (BID ID -3335895)