PROPOSED CONSTRUCTION OF DIGITAL LIBRARY BUILDING AT GOKAK CITY IN GOKAK TALUKA OF BELAGAVI DISTRICT UNDER 4059-80-051-0-29-386 DEPARTMENT BUILDINGS FOR 2025-26

Information on litigation in which the Tenderer is involved:

Other Party/Parties Employer Details of Dispute Amount involved Remarks showing Present Status

BANKER’S CERTIFICATE

This is to certify that M/s. ………………………….. is a reputed company with a good financial standing. If the contract for this work, namely ……………………………… (Name of the work) is awarded to the above firm, we shall be able to provide overdraft/credit facilities to the extent of Rs. …………… to meet the working capital requirements for executing the above contract

Name of the Bank, Senior Bank Manger

Address:…………………………

List of Machinery

Item of Equipment Requirement Owned/ Hired/Leased Owned/ Hired/Lease and available Remarks

No. Capacity Number/Capacity Age/ Condition

Information of the works for which Tenderer has submitted Tender.

Project Name Name & Address of the Employer Name of Work Amount put to Tender in Rs lac. Specified period of completion (including/excluding Monsoon Prescribed last date of submission of tender Probable date of decision on the Tender Remarks if any.

Information of the works for which Tender acceptance letters are received.

Project Name Name & Address of the Employer Name of Work Tendered Amount in Rs lac Specified period of completion (including/excluding Monsoon Probable Date of Handing over of site

Attach letters of Acceptance received.

Information on works which are yet to be completed.

Project Name Name & Address of the Employer Name of Work Contract Number Value of contract Rs. Lakhs Date of Markout /Date of Handing over of site Specified period of completion (including/excluding Monsoon cost of balance works remaining Rs. in lac Probable date of completion

Attach Certificate for each work indicated above, in Format 3, obtained from the Competent Authority

Monthly Physical and Financial Progress Achieved in all Contracts which are referred to in Format 3

Names of Works Item of Work Names of Employers 2018-19 Remarks (Indicate contract reference)

January February march April May June July August September October November December

Earthwork & Embankment in cum Physical

Base Course (WMM/WBM) in cum Physical

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical

Concrete in cum Physical

Steel in MT Physical

Others Specify Details Physical

Earthwork & Embankment in cum Physical

Base Course (WMM/WBM) in cum Physical

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical

Concrete in cum Physical

Steel in MT Physical

Others Specify Details Physical

Earthwork & Embankment in cum Physical

Base Course (WMM/WBM) in cum Physical

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical

Concrete in cum Physical

Steel in MT Physical

Others Specify Details Physical

Earthwork & Embankment in cum Physical

Base Course (WMM/WBM) in cum Physical

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical

Concrete in cum Physical

Steel in MT Physical

Others Specify Details Physical

Earthwork & Embankment in cum Physical

Base Course (WMM/WBM) in cum Physical

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical

Concrete in cum Physical

Steel in MT Physical

Others Specify Details Physical

Earthwork & Embankment in cum Physical

Base Course (WMM/WBM) in cum Physical

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical

Concrete in cum Physical

Steel in MT Physical

Others Specify Details Physical

FORMAT FOR WORK DONE CERTIFICATE TO BE OBTAINED FROM COMPETENT AUTHORITY

has executed/ is executing(strike off which ever is not applicable) the work of .............................................

in this Organisation. The details of the work is as under:

1 Name of the Project :

2 Name of the Work :

3 Contract Amount :

4 Date of signing the Agreement :

5 Date of handing over of the Site :

Progress * : 2018-19

January February March April May June July August September October November December

Earthwork & Embankment Physical in cum :

Financial in lac :

Base Course (WMM/WBM) Physical in cum :

Financial in lac :

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) Physical in cum :

Financial in lac :

Others (Pl specify) Physical is cum/sqm :

Financial in lac :

Others (Pl specify) Physical :

Financial in lac :

Progress * : 2019-20

January February March April May June July August September October November December

Earthwork & Embankment Physical in cum :

Financial in lac :

Base Course (WMM/WBM) Physical in cum :

Financial in lac :

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) Physical in cum :

Financial in lac :

Others (Pl specify) Physical is cum/sqm :

Financial in lac :

Others (Pl specify) Physical :

Financial in lac :

Progress * : 2020-21

January February March April May June July August September October November December

Earthwork & Embankment Physical in cum :

Financial in lac :

Base Course (WMM/WBM) Physical in cum :

Financial in lac :

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) Physical in cum :

Financial in lac :

Others (Pl specify) Physical is cum/sqm :

Financial in lac :

Others (Pl specify) Physical :

Financial in lac :

Progress * : 2021-22

January February March April May June July August September October November December

Earthwork & Embankment Physical in cum :

Financial in lac :

Base Course (WMM/WBM) Physical in cum :

Financial in lac :

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) Physical in cum :

Financial in lac :

Others (Pl specify) Physical is cum/sqm :

Financial in lac :

Others (Pl specify) Physical :

Financial in lac :

Progress * : 2022-23

January February March April May June July August September October November December

Earthwork & Embankment Physical in cum :

Financial in lac :

Base Course (WMM/WBM) Physical in cum :

Financial in lac :

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) Physical in cum :

Financial in lac :

Others (Pl specify) Physical is cum/sqm :

Financial in lac :

Others (Pl specify) Physical :

Financial in lac :

7 Stipulated Period of Completion (including monsoon)

8 Prescribed Date of completion

9 Actual Date of Completion/ Probable Date of Completion

10 Cost of balance work (if work is in progress) :

11 Reasons if any for delay in completion, if work completion is delayed :

12 Penalty if any imposed :

13 Any other information :

* Monthwise progress shall be furnished seperately.

Date: (Authorised Signatory)

Address for correspondence:

Work executed as prime contractor (in the same name) on works of similar nature during the five years specified)

Project Name Name & Address of the Employer Name of Work Contract Number Value of contract Rs. Lakhs Date of Markout /Date of Handing over of site Specified period of completion (including/excluding Monsoon Actual date of completion Remarks (appreciation letter received for early completion or reasons, if there is delay in completion)

Attach Workdone Certificate for each work indicated above, in Format 3, obtained from the Competent Authority

Financial Year Total value of Civil Engineering works executed and payments received in the last five years (in Rs. lac)

Billed upto date during 2023-24

Attach Chartered Accountant's Yearwise Statements.

PÉ®¸ÀzÀ ºÉ¸ÀgÀÄ : ¨É¼ÀUÁ« f¯Éè aPÉÆÌÃr vÁ®ÆQ£À §¼ÉÆèÁ PÁæ¸ï¢AzÀ ªÀÄÄzsÉÆüÀ ¤¥Áàt gÀ¸ÉÛ ªÀgÉUÉ ªÁíAiÀiÁ gÁªÀÄ¥ÀÆgÀ gÀ¸ÉÛ ¸ÀÄzsÁgÀuÉ ªÀiÁqÀĪÀÅzÀÄ. (UÁæ«ÄÃt gÀ¸ÉÛ)

Sl no Items Qty Rate Amount

Construction of Road

2 Earthwork excavation by mechanical means in hard /ordinary soil involving an average horizontal throw upto 2mtrs. & average lift upto 0.5mtrs. excavated surface levelled and sides neatly dressed etc. the desposed earth to be levelled neatly after the breaking of clods completed as per specifications MORTH clause 301. (P No-139 / 19.2.1) Cum 31.5 4115.5 31.5 0.5

5 Scarifying sqm 3.52 1925 1964.55 0.5

7 KSRRB M500-6.KSRRB M500-6. Providing and applying primer coat with S.S. bitumen emulsion on prepared surface of granular base such as WBM, WMM including cleaning of road surface and spraying primer at the rate of 0.60 kg / sqm using mechanical means complete as per specifications. MORTH Specification No. 502 (P No-158 / 21.6 sqm 30.4 8275 30.4 0.5

8 KSRRB M500-10. Tack Coat:- Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechancial broom. complete as per specifications. MORTH Specification No. 503 (P No-159 / 21.10.2) using Bitumen 80/100 sqm 10.67 8275 10.67 0.5

9 KSRRB M500-18. Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder at 4.5 to 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 500.8 complete in all respects complete as per specifications. (P No-160 / 21.20.6) 25-30mm compacted thickness with 5% bitumen using 60/70 using 40-60 HMP using mechanical paver (Grading-II) cum 7867.49 206.875 7867.49 0.5

10 KSRRB M300-55. Construction of sub-grade and earthen shoulders with approved material Gravel/Murrum with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No. 300-2 complete as per specifications (including cost of earth, watering charges & compaction by vibratory roller)MORTH Specification No. 305 (P No-145 / 19.62) cum 445.2 430.625 445.2 0.5

1 Embnkment cum 69.3 430 445.2 0.5

Construction of Road

2 Earthwork excavation by mechanical means in hard /ordinary soil involving an average horizontal throw upto 2mtrs. & average lift upto 0.5mtrs. excavated surface levelled and sides neatly dressed etc. the desposed earth to be levelled neatly after the breaking of clods completed as per specifications MORTH clause 301. (P No-139 / 19.2.1) Cum 31.5 4115.5 31.5 0.5

5 Scarifying sqm 3.52 1925 1964.55 0.5

7 KSRRB M500-6.KSRRB M500-6. Providing and applying primer coat with S.S. bitumen emulsion on prepared surface of granular base such as WBM, WMM including cleaning of road surface and spraying primer at the rate of 0.60 kg / sqm using mechanical means complete as per specifications. MORTH Specification No. 502 (P No-158 / 21.6 sqm 30.4 8275 0.5

8 KSRRB M500-10. Tack Coat:- Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechancial broom. complete as per specifications. MORTH Specification No. 503 (P No-159 / 21.10.2) using Bitumen 80/100 sqm 10.67 8275 30.4 0.3

9 KSRRB M500-18. Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder at 4.5 to 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 500.8 complete in all respects complete as per specifications. (P No-160 / 21.20.6) 25-30mm compacted thickness with 5% bitumen using 60/70 using 40-60 HMP using mechanical paver (Grading-II) cum 7867.49 206.875 7867.49 0.3

10 KSRRB M300-55. Construction of sub-grade and earthen shoulders with approved material Gravel/Murrum with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No. 300-2 complete as per specifications (including cost of earth, watering charges & compaction by vibratory roller)MORTH Specification No. 305 (P No-145 / 19.62) cum 445.2 430.625 445.2 0.3

1 Embnkment cum 69.3 430 446.2 0.5

Construction of Road

8 KSRRB M500-10. Tack Coat:- Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechancial broom. complete as per specifications. MORTH Specification No. 503 (P No-159 / 21.10.2) using Bitumen 80/100 sqm 10.67 8275 10.67 0.2

9 KSRRB M500-18. Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder at 4.5 to 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 500.8 complete in all respects complete as per specifications. (P No-160 / 21.20.6) 25-30mm compacted thickness with 5% bitumen using 60/70 using 40-60 HMP using mechanical paver (Grading-II) cum 7867.49 206.875 7867.49 0.2

10 KSRRB M300-55. Construction of sub-grade and earthen shoulders with approved material Gravel/Murrum with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No. 300-2 complete as per specifications (including cost of earth, watering charges & compaction by vibratory roller)MORTH Specification No. 305 (P No-145 / 19.62) cum 445.2 430.625 445.2 0.2

11 KSRRB M800-13. Road marking with Hot Applie Thermoplastic Compound with Reflecting Glass Beads on Bitumimous Surface :- Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads at 250gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes complete as per specifications. (P No-179 / 24.15) MORTH specification No. 803 sqm 375 537.6 1

15 KSRRB M800-2. Retro-Reflectorised Traffic Signs :- Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 800.1.3, fixed over Aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing complete as per specifications. MORTH Specification No.801 (P No-177 / 24.2.4.1) 80cm x 60cm rectangular - Type-IV sqm 2 3867.15 1

16 KSRRB M800 Road markers / Road stud KSRRB M800-35. Providing and fixing of road stud 100x 100 mm, diecast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS: 873 part 4:1973 complete as per specifications (P No-184 / 24.41) no 80 352.8 1

NAME OF WORK: PROPOSED CONSTRUCTION OF DIGITAL LIBRARY BUILDING AT GOKAK CITY IN GOKAK TALUKA OF BELAGAVI DISTRICT UNDER 4059-80-051-0-29-386 DEPARTMENT BUILDINGS FOR 2025-26 (PWD/2025-26/BD/WORK_INDENT32111)

Sl no Items Unit Qty Rate Amount Milestone -1 Quantity (6 Month) Milestone -2 Quantity (3 Month) Milestone -3 Quantity (3 Month) Total Quantity Rate in Rs. Amount for Mile Stone 1 in Rs Amount for Mile Stone 2 in Rs Amount for Mile Stone 3 in Rs Total Amount in Rs

for Quality Control Equipments

1 acer Intel Core i7-14700 All in One PC acerR(Veriton Z6714GT)Type of In-built Wireless Connectivity Wi-Fi 6 (802.11ax) + Bluetooth 5.0Number of Ports 1-HDMI,1-DP,1- RJ-45 (10/100/1000 Ethernet Port),Universal Audio Jack,2-USB 3.1 Gen 1 TYPE A,2-USB 3.1 Gen 2 TYPE A,1-USB 3.1 Gen 2 TYPE A,1-USB 3.2 Gen 2 TYPE C Processor Number Intel Core i7-14700 Nos 2 0

2 EPSON A4, A3 and Legal Size Colour Inkjet Multifunction Machine EPSON (EPSON WF-C878R) Nos 1 0

3 EIE INSTRUMENTS PVT. LTD. Concrete Slump TestApparatus EIE INSTRUMENTSPVT. LTD. (TM-165-ISI) Nos 1 0

4 RLESCIENTIFIC Graduated Scale for Analog Type Concrete Test Hammer (Rebound Hammer) RLESCIENTIFICR (RLE-599F) Nos 1 0

5 ROBUST IP 54 with Compensator Setting Accuracy 0.5 second ROBUSTR (GOL26D with BT160 plus GR500 Nos 1 0

1 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-397511kV Class 3CX95 Sq.mm XLPE UG Cable 2Runs, As per HESCOM SR 2023-24. Page No 359 Sl No. 254, I No.36.01.-Material cost Kms 0.03 0

2 Straight through Jointing Kit suitable for 95sqmm XLPE UG Cable, As per HESCOM SR 2023-24. Page No 365 Sl No. 358, I No.45.16.-Material cost Per Kit 3 0

3 Cable covering tiles 250X125X40 mm, As per HESCOM SR 2023-24. Page No 376 Sl No. 582, I No.68.06.-Material cost Nos. 10.25 0

4 Sand, As per HESCOM SR 2023-24. Page No 384 Sl No. 104, I No.66.11.-Material cost Cmt 1786 0

5 Cable trench excavation, Ordinary soil , (Extracted from Vol-1, PWD SR Sl No. 1.17.1)-Cost of Labour charges Cmt 11.25 0

6 Laying of cable in trench, As per HESCOM SR 2023-24. Page No 396 Sl No. ….. , I No.21.01.-Cost of Labour charges km 0.03 0

7 Refilling and consolidation, (Extracted from Vol-1, PWD SR Sl No. 1.10)-Cost of Labour charges Cmt 11.25 0

8 Making of straight through joints - 95Sqmm XLPE UG Cable, As per HESCOM SR 2023-24. Page No 396 Sl No. 179 , I No.22.01. -Cost of Labour charges Nos 3 0

9 Covering the cable with tiles. As per HESCOM SR 2023-24. Page No 400 Sl No. 257 , I No.27.01. -Cost of Labour charges km 0.03 0

10 Spreading and forming with Sand round the cable, As per HESCOM SR 2023-24. Page No 400 Sl No. 268 , I No.28.09. -Cost of Labour charges km 0.03 0

11 RCC Pole - 9 Mtrs Long, 145 kg WL (for Deadend, Anchor points) , (As per HESCOM SR 2023-24. Page No 347 Sl No.1 I No.1.01, RS 7076.00, Labour Charges RS 1113+629=1472 As per HESCOM SR 2023-24. Page No 388 Sl No. 30, I No 2.02 & Page No 387 Sl No 1, I No 1.1.1,) Nos 2 0

12 Spiral Earth Electrode,(As per HESCOM SR 2023-24. Page No 348 Sl No.26 I No 2.16 Rs 239, Labour Charges RS 93.00 As per HESCOM SR 2023-24. Page No 388 Sl No. 36, I No 2.08 ) Nos 2 0

13 RCC Pole - 9 Mtrs Long, 145 kg WL (for Deadend, Anchor points) , (As per HESCOM SR 2023-24. Page No 347 Sl No.1 I No.1.01, RS 7076.00, Labour Charges RS 1113+629=1472 As per HESCOM SR 2023-24. Page No 388 Sl No. 30, I No 2.02 & Page No 387 Sl No 1, I No 1.1.1,) Nos 2 0

14 Releasing and Re-fixing of 45 kN Disc Insulators (Polymeric type) Nos 6 0

15 Releasing and Re-stringing of Rabbit ACSR Conductor, ( Labour Charges RS 4361*1.90=8285.90.00 As per HESCOM SR 2023-24. Page No 390 Sl No. 65, I No 6.02 ) Kms 0.05 0

16 Releasing and Re-fixing of GOS 400Amps Single break set 2 0

17 Releasing and Re-fixing of H Frame for mounting GOS set 2 0

18 Spiral Earth Electrode,(As per HESCOM SR 2023-24. Page No 348 Sl No.26 I No 2.16 Rs 239, Labour Charges RS 93.00 As per HESCOM SR 2023-24. Page No 388 Sl No. 36, I No 2.08 ) Nos 2 0

19 PSC Pole - 9 Mtrs Long, 200 kg WL, (Labour Charges RS 1113+629=1472*90% As per HESCOM SR 2023-24. Page No 388 Sl No. 30, I No 2.02 & Page No 387 Sl No 1, I No 1.1.1) Nos 1.8 0

1 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer in-charge. m3 51.09 0

2 Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. m3 65 0

3 Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking to the appropriate disposal area as per direction of Engineer-in-charge. m 302 0

4 Dismantling doors, windows and clerestory windows (steel or wood) shut ter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineer-in-charge. m3 0.67 0

5 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking to the appropriate disposal area as per direction of Engineer-in-charge. m3 27.96 0

1 Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary ammendments and instructions of engineer incharge of work. For 3 HP etc. complete Each 1 0

2 Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For:Heavy Duty GI Pipe etc. complete. m 190 0

3 Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. m 250 0

4 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. Job 1 0

5 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. cm2 19500 0

6 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. m 2 0

7 Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 Each 2 0

8 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.The following additional tests are compulsory either to be conducted at works or independent lab with witness by inspecting authority.Additional Tests for FRLS-Applicable Standard Oxygen Index -IS 694-1990, Clause 16.8 Temperature Index -IS 694-1990, Clause 16.13 Smoke Density -IS 694-1990, Clause 16.14 Test for Halogen Acid Gas evaluation -IS 694-1990, Clause 16.12 m 20 0

9 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.The following additional tests are compulsory either to be conducted at works or independent lab with witness by inspecting authority.Additional Tests for FRLS-Applicable Standard Oxygen Index -IS 694-1990, Clause 16.8 Temperature Index -IS 694-1990, Clause 16.13 Smoke Density -IS 694-1990, Clause 16.14 Test for Halogen Acid Gas evaluation -IS 694-1990, Clause 16.12 m 20 0

10 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. m 2 0

11 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. Each 2 0

12 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. Each 1 0

13 Fixing a shunt capacitor of ... KVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor. Each 3 0

14 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. Each 2 0

15 Digging of Pit for providing GI Pipe type Earthing. 1.6.1 Ordinary Soil Each 1 0

16 GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg Per Pit 1 0

17 Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each No 1 0

18 Good Quality Salt for grounding purposes packed in 50 Kg gunny bag No 1 0

19 Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 Bag 0.015 0

20 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable Km 0.01 0

21 Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. All kinds of soils. Depth upto 1.50 m Km 3.75 0

22 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications m³ 3.75 0

23 GI Heavy-Duty pipes 40mm dia. m³ 6 0

24 Laying the GI Pipe 80 mm to 150 mm dia at Drainage Water Supply Crossing including fixing collars elbows, bends, Tees and other fitting with Cuts and Threads wherever necessary complete. m 6 0

25 Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable Mtr 1 0

26 Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 Amps three phase 4 wire whole current class-1 Accuracy Energy Meter. Each 2 0

27 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m Each 254.1 0

28 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates m³ 6213.9 0

29 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) m³ 0.9 0

30 RCC hume pipe Circular pump house: Providing precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of 2.5 Mtr. With Wall thickness 65mm etc. complete. m³ 1 0

31 Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc.,complete as directed by the Engineer in charge of the work. Each 1 0

32 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Each 120.75 0

33 Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade English and Roman m² 750 712.5 0

34 Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers's method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test. etc. complete Each 2 0

35 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth) m 50 0

36 Borewell depth of 50 to 100 Mtrs m 50 0

37 Borewell depth of 100 to 150 Mtrs m 50 0

38 Borewell depth of 150 to 200 Mtr m 50 0

39 Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. m 50 0

40 Providing and laying at site of work MS casing caps as per IS 1239 (partII) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge Each 1 0

For Stilt floor

1 Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work m3 380.1 0

2 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work 1.14.1 In all kinds of soils Depth upto 3 m m3 107.1 0

3 1.14 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work 1.15.1 In ordinary/soft rock without blasting upto 1.5 m depth m3 381.15 0

4 4.0 ANTI-TERMITE TREATMENT 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. m3 540 0

5 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) 2.1.3 Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates m3 75.25 0

6 2.2 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) 2.2.2.1 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 113.36 0

7 Addendum I-Additionalities for formwork, Centering & Scaffolding " For Foundation upto Plinth (a) Isolated " at 8% m3 113.34 0

8 2.4 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) 2.4.3 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 23.08 0

9 Addendum II-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70% m3 7.26 0

10 Addendum I -Additionalities for formwork, Centering & Scaffolding " For Plinth Beams of Buildings " at 50% m3 12.82 0

11 2.5 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) 2.5.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 82.93 0

12 Addendum I-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70% m3 10.94 0

13 Addendum II-Additionalities for formwork, Centering & Scaffolding " For Beams & lintels of Buildings " at 60% m3 21.7 0

14 Addendum I-Additionalities for formwork, Centering & Scaffolding " For Roof slab of Buildings " at 50% m3 44.92 0

15 5.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) upto plinth level with: 5.1.1 Cement mortar 1:6 (1 cement: 6 coarse sand) m3 10.24 0

16 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. m3 226.99 0

17 Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 22.35 0

18 6.15 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m2 5.64 0

19 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. t 15.57 0

20 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m2 0.27 0

21 12.15 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) m3 4.09 0

22 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge. m2 0.59 0

23 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). m2 0.3 0

24 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately) m2 4.75 0

25 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. m2 3 0

26 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 101.99 0

27 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m2 105 0

28 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 188.55 0

29 9.12 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. 9.12.2 Size of Tile 600x600 mm m2 32.53 0

30 9.23 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. m2 21.22 0

31 10.19 Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, mortar, labour for all items of work, usage charges of machinery etc., complete as per specification. m2 3782.1 0

32 8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 24.37 0

33 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) m2 165.9 0

34 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 188.54 0

35 11.28 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless-steel nuts and bolts complete, i/c fixing the railing with necessary accessories &stainless-steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. m2 64.53 0

36 15.1 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. m2 32.06 0

37 Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/ structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.(c)Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.(d)Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. m2 2819.25 0

38 Supply and installation of 2Kg C02 Gas Type Fire Extinugisher Squeeze grip type, used Unused Mechanism, SqueezeGrip,GrossWeight 9.1Kg. emptyWeight 7.1Kg. CanHeight 595MMDiameter 108MM,Discharge Time less than8Sees, Controllable dischargemechanism,Applicable on Class 8&C Fire, 8 Rating 88, Can Construction : Hot spinning/Forging, Valve Construction : Forging&Machining, Internal Coating of Can : Not Applicable,ExternalcoatingofCan:SprayPainting,Sheetmetal thickness: 4.0MMlSIApproved,1YearWarranty.withinstalert systemwithSuperior qualityEPDMRubberHosepipe etc., includingcost cost of supporting materials like MS stand & accessaries if it is fixing n floor/MS brackets &accessories if it is fixingonwall,, labour,usagechargesofmachinery complete as per specifications. complete each 8 0

Water supply and Sanitation work

1 Providing and fixing brass stop cock of approved quality :15 mm nominal bore No 5 0

2 Providing and fixing gun metal non- return valve of approved quality (screwed end) :50 mm nominal bore Horizontal ( Vol.2, P.No.118- I.No.13.6.4.1) No 5 0

3 Providing and fixing gun metal non- return valve of approved quality (screwed end) :32 mm nominal bore Horizontal ( Vol.2, P.No.118- I.No.13.6.2.1) No 5 0

4 Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata.All kinds of soils. Depth upto 1.50 m( Vol.1, P.No.10- I.No.1.17.1) m3 16.88 0

5 Poly Propylene Random Co-polymer (PPR) pipe with fitting SDR 7.4 -50 mm Outer dia m 50 0

6 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :* 100 mm inlet and 75 mm outlet *Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 (Vol.2, P.No.124 I.No.13.46) m 2 0

7 Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0 HDPE Grade PE80-PN10.0,110mm dia (Vol.5, P.No.96 I.No.9.3.4) m 75 0

8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes (Vol.2, P.No.122 I.No.13.31.2) m 40 0

9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 25 mm nominal dia Pipes (Vol.2, P.No.122 I.No.13.31.3 m 40 0

10 Supply of PVC pipe - OD 110mm and 6 Kg/sqcm (Vol.5, P.No.A-44 I.No.647) m 50 0

11 Supply of PVC pipes of 8 Kg/cm2 for 75mm(0.917)( Vol.5, P.No.A-45 I.No.680) m 50 0

12 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments( Vol.5, P.No.117 I.No.10.9) 75 mm dia PVC Elbows No 10 0

13 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments( Vol.5, P.No.117 I.No.10.9) 110 mm dia PVC Elbows No 10 0

14 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter etc. complete as directed by the engineer-in-charge. m 24 0

Fixtures for doors and windows.

1 12.59 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. No 3 0

2 12.69 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. 12.69.2 125mm No 16 0

3 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. No 2 0

4 12.65 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. No 2 0

5 22.15.4 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Aldrop 16mm dia, 300mm No 8 0

6 12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete No 4 0

7 22.15.2 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Handles 300mm No 8 0

1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work m3 107.1 0

2 Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 m3 517.65 0

3 Construction of Granular Sub Base by providing graded Material, mixing with cement in a mechanical mix plant at OMC carriage of mixed material to work site spreading in a uniform layer with mechanical paver on prepared surface and compaction with vibratory power roller to achieve the desired density complete as per clause 401 (2.5% Cement) Laying using Mechanical Paver Grading V materials m3 2611.35 0

4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) vMix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates m3 16.62 0

5 Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential Streets of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification) m2 166.2 0

6 Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 600 x 300 x 150 mm Kerb Stone m 92 0

For Ground floor

1 2.5 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) 2.5.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 0

2 Addendum I-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70% m3 0

3 Addendum II-Additionalities for formwork, Centering & Scaffolding " For Beams & lintels of Buildings " at 60% m3 0

4 Addendum I-Additionalities for formwork, Centering & Scaffolding " For Chejjas, Canopy & Other Architectural projections of monor sections " at 45% m3 0

5 Addendum I-Additionalities for formwork, Centering & Scaffolding " For Roof slab of Buildings " at 50% m3 0

6 Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 0

7 6.15 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 0

8 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. m3 0

9 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0

10 12.15 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) m2 0

11 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). m3 0

12 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately) m2 0

13 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge. m2 0

14 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. m2 0

15 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door frames of cross-sections 90 mm x 45 mm having single rebate of 32mm x 15 mm to receive shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyster resin and choped mat. door frame laminate shall be 2mm thick and shall be filed with suitable wooden block in all the three legs. the frame shall be covered with fiber glass from all sides M.S stay shall be provided at the bottom to steady the frame m2 0

16 Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. m2 0

17 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) m2 0

18 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including cost of materials, labour, usage charges of machinery complete as per specifications kg 0

19 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge: Pre-laminated particle board with decorative lamination on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. m2 0

20 12.85 Providing & fixing of louvered ventilator made out of multi chamberedUPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) m2 0

21 11.34B Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. kg 0

22 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 0

23 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m2 0

24 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 0

25 9.12 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. 9.12.2 Size of Tile 600x600 mm m2 0

26 Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. m2 0

27 10.19 Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, mortar, labour for all items of work, usage charges of machinery etc., complete as per specification. m2 0

28 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. m2 0

29 9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. m2 0

30 8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 0

31 8.33.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 0

32 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) m2 0

33 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 0

34 11.28 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless-steel nuts and bolts complete, i/c fixing the railing with necessary accessories &stainless-steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. m2 0

35 Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar labour, curing complete as per specifications. m2 0

36 10.1.1 'Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar loca tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. m2 0

37 15.1 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. m2 0

38 Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/ structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.(c)Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.(d)Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. m2 0

39 Providing and fixing in position 12mm thick plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling tiles up to a height of 5 m above floor level over aluminium strips 25mm x 6mm and rendered smooth with plaster of paris including cost of materials, labour, curing complete as per specifications. m2 0

40 Providing & fixing vertical blinds of reputed make of shape 100mm regular fabric with powder coated aluminium channel, telting with PVC Chain system with all necessary fittings and fixtures as per direction of Engineer in charge m2 0

Water supply and Sanitation work

1 Supply of PVC pipe - OD 25mm and 10 Kg/sqcm m 0

2 Supply of PVC pipe - OD 32mm and 10 Kg/sqcm( Vol.5, P.No.A-44,I.No.654) m 50 0

3 Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Double Union Ball Valve 20mm each 5 0

4 Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Double Union Ball Valve 25mm each 5 0

5 Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Double Union Ball Valve 32mm No 5 0

6 Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded Elbow 20X1/2mm No 10 0

7 Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded Elbow 25X1/2mm No 10 0

8 Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded Elbow 32X1/2mm m 10 0

9 Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded Elbow 20X1/2mm m 10 0

10 Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded Elbow 25X1/2mm m 8 0

11 Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded Elbow 32X1/2mm m 8 0

12 Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded TEE 20X1/2mm m 8 0

13 Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded TEE 25X1/2mm m 8 0

14 Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded TEE 32X1/2mm m 8 0

15 Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Female Threaded TEE 20X1/2mm m 8 0

16 Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Female Threaded TEE 25X1/2mm m 8 0

17 Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Female Threaded TEE 32X1/2mm m 8 0

18 Providing and fixing brass stop cock of approved quality :15 mm nominal bore m 5 0

19 Providing and fixing gun metal non- return valve of approved quality (screwed end) :50 mm nominal bore Horizontal ( Vol.2, P.No.118- I.No.13.6.4.1) m 4 0

20 Providing and fixing gun metal non- return valve of approved quality (screwed end) :32 mm nominal bore Horizontal ( Vol.2, P.No.118- I.No.13.6.2.1) m 4 0

21 Poly Propylene Random Co-polymer (PPR) pipe with fitting SDR 7.4 -50 mm Outer dia m 50 0

22 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid m 2 0

23 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps m 3 0

24 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.(Vol.2, P.No.136 I.No.14.31) m 3 0

25 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.(Vol.2, P.No.137 I.No.14.40.2) m 2 0

26 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :* 100 mm inlet and 75 mm outlet *Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 (Vol.2, P.No.124 I.No.13.46) m 4 0

27 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes (Vol.2, P.No.122 I.No.13.31.2) m 40 0

28 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 25 mm nominal dia Pipes (Vol.2, P.No.122 I.No.13.31.3 m 40 0

29 Supply of PVC pipe - OD 110mm and 6 Kg/sqcm (Vol.5, P.No.A-44 I.No.647) m 40 0

30 Supply of PVC pipes of 8 Kg/cm2 for 75mm(0.917)( Vol.5, P.No.A-45 I.No.680) m 40 0

31 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments( Vol.5, P.No.117 I.No.10.9) 75 mm dia PVC Elbows m 40 0

32 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments( Vol.5, P.No.117 I.No.10.9) 110 mm dia PVC Elbows m 40 0

33 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter etc. complete as directed by the engineer-in-charge. m 0

34 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 m 394 m 40 0

35 13.17 Providing and fixing PTMT bib cock of approved quality and colour 13.17.4 15 mm nominal bore, 90 mm long, No 5 0

36 13.18 Providing and fixing PTMT stop cock of approved quality and colour 13.18.1 15 mm nominal bore, 86 mm long, weighing not less than 88 g No 5 0

37 Water purification plants: Providing, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per the enclosed detailed Technical Specifications including cost of material, loading and unloading and as directed by the Engineer in charge. (Ref- detailed specification enclosed seperatly). Note:- 1.The above rates mentioned are only for the preparation of estimate purpose. 2. All items are to be of BSI /NFS standards,with BSI / NFS mark . 3. Tenders to be invited for procurement. 4. No direct payment should be made under any situation or condition or on any account. 5. After commissioning of plant necessary testing to be done for the satisfactory of Engineer Incharge. Note : Refer the ANNEXURE : F for Detailed Specification of Each Each 1 0

Fixtures for doors and windows.

1 12.59 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. No 5 0

2 12.69 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. 12.69.2 125mm No 24 0

3 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. No 6 0

4 12.65 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. No 6 0

5 22.15.4 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Aldrop 16mm dia, 300mm No 12 0

6 12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete No 6 0

7 22.15.2 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Handles 300mm No 12 0

For First floor

1 2.5 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) 2.5.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 0

2 Addendum I-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70% m3 0

3 Addendum II-Additionalities for formwork, Centering & Scaffolding " For Beams & lintels of Buildings " at 60% m3 0

4 Addendum I-Additionalities for formwork, Centering & Scaffolding " For Chejjas, Canopy & Other Architectural projections of monor sections " at 45% m3 0

5 Addendum I-Additionalities for formwork, Centering & Scaffolding " For Roof slab of Buildings " at 50% m3 0

6 Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 0

7 6.15 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 0

8 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. m3 0

9 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0

10 12.15 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) m3 0

11 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). m3 0

12 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately) m2 0

13 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge. m2 0

14 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. m3 0

15 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door frames of cross-sections 90 mm x 45 mm having single rebate of 32mm x 15 mm to receive shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyster resin and choped mat. door frame laminate shall be 2mm thick and shall be filed with suitable wooden block in all the three legs. the frame shall be covered with fiber glass from all sides M.S stay shall be provided at the bottom to steady the frame m2 0

16 Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. m2 0

17 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) m2 0

18 12.85 Providing & fixing of louvered ventilator made out of multi chamberedUPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) m2 0

19 11.34B Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. kg 0

20 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 0

21 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m2 0

22 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 0

23 9.12 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. 9.12.2 Size of Tile 600x600 mm m2 0

24 Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. m2 0

25 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. m2 0

26 9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. m2 0

27 10.19 Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, mortar, labour for all items of work, usage charges of machinery etc., complete as per specification. m2 0

28 8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 0

29 8.33.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 0

30 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) m2 0

31 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 0

32 11.28 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless-steel nuts and bolts complete, i/c fixing the railing with necessary accessories &stainless-steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. kg 0

33 Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar labour, curing complete as per specifications. m2 0

34 10.1.1 'Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar loca tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. m2 0

35 15.1 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. m2 0

36 Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/ structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.(c)Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.(d)Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. m2 0

37 Providing and fixing in position 12mm thick plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling tiles up to a height of 5 m above floor level over aluminium strips 25mm x 6mm and rendered smooth with plaster of paris including cost of materials, labour, curing complete as per specifications. m2 0

38 Providing & supplying Carpet/Mat of 800+ gsm with stain proof, flexible and super absorbent fibre of good quality as per direction of Engineer in charge. m2 0

39 Providing & fixing vertical blinds of reputed make of shape 100mm regular fabric with powder coated aluminium channel, telting with PVC Chain system with all necessary fittings and fixtures as per direction of Engineer in charge m2 0

Water supply and Sanitation work

1 Supply of PVC pipe - OD 25mm and 10 Kg/sqcm m 0

2 Supply of PVC pipe - OD 32mm and 10 Kg/sqcm( Vol.5, P.No.A-44,I.No.654) m 50 0

3 Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Double Union Ball Valve 20mm Each 5 0

4 Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Double Union Ball Valve 25mm Each 5 0

5 Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Double Union Ball Valve 32mm No 5 0

6 Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded Elbow 20X1/2mm No 10 0

7 Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded Elbow 25X1/2mm No 10 0

8 Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded Elbow 32X1/2mm m 10 0

9 Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded Elbow 20X1/2mm m 10 0

10 Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded Elbow 25X1/2mm m 10 0

11 Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded Elbow 32X1/2mm m 10 0

12 Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded TEE 20X1/2mm m 10 0

13 Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded TEE 25X1/2mm m 10 0

14 Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded TEE 32X1/2mm m 10 0

15 Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Female Threaded TEE 20X1/2mm m 10 0

16 Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Female Threaded TEE 25X1/2mm m 10 0

17 codeVol-5 Page no 39 Item no 2.75 m 10 0

18 Providing and fixing brass stop cock of approved quality :15 mm nominal bore m 5 0

19 Providing and fixing gun metal non- return valve of approved quality (screwed end) :50 mm nominal bore Horizontal ( Vol.2, P.No.118- I.No.13.6.4.1) m 4 0

20 Providing and fixing gun metal non- return valve of approved quality (screwed end) :32 mm nominal bore Horizontal ( Vol.2, P.No.118- I.No.13.6.2.1) m 4 0

21 Poly Propylene Random Co-polymer (PPR) pipe with fitting SDR 7.4 -50 mm Outer dia m 50 0

22 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid Each 1 0

23 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps Each 2 0

24 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.(Vol.2, P.No.136 I.No.14.31) m 2 0

25 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.(Vol.2, P.No.137 I.No.14.40.2) m 2 0

26 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :* 100 mm inlet and 75 mm outlet *Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 (Vol.2, P.No.124 I.No.13.46) m 4 0

27 Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0 HDPE Grade PE80-PN10.0,110mm dia (Vol.5, P.No.96 I.No.9.3.4) No 0 0

28 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes (Vol.2, P.No.122 I.No.13.31.2) No 50 0

29 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 25 mm nominal dia Pipes (Vol.2, P.No.122 I.No.13.31.3 m 50 0

30 Supply of PVC pipe - OD 110mm and 6 Kg/sqcm (Vol.5, P.No.A-44 I.No.647) m 50 0

31 Supply of PVC pipes of 8 Kg/cm2 for 75mm(0.917)( Vol.5, P.No.A-45 I.No.680) m 40 0

32 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments( Vol.5, P.No.117 I.No.10.9) 75 mm dia PVC Elbows m 10 0

33 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments( Vol.5, P.No.117 I.No.10.9) 110 mm dia PVC Elbows Each 10 0

34 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter etc. complete as directed by the engineer-in-charge. Each 28.8 0

35 13.31 Providing and fixing Chorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamp at 1 00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-charge. Internal work -Exposed on wall 25mm nominal OD Pipe m 40 0

36 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 m 394 m 40 0

37 13.17 Providing and fixing PTMT bib cock of approved quality and colour 13.17.4 15 mm nominal bore, 90 mm long, m 5 0

38 13.18 Providing and fixing PTMT stop cock of approved quality and colour 13.18.1 15 mm nominal bore, 86 mm long, weighing not less than 88 g No 5 0

39 One urinal basin with 5 litre white P.V.C. automatic flushing cistern No 4 0

40 Water purification plants: Providing, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per the enclosed detailed Technical Specifications including cost of material, loading and unloading and as directed by the Engineer in charge. (Ref- detailed specification enclosed seperatly). Note:- 1.The above rates mentioned are only for the preparation of estimate purpose. 2. All items are to be of BSI /NFS standards,with BSI / NFS mark . 3. Tenders to be invited for procurement. 4. No direct payment should be made under any situation or condition or on any account. 5. After commissioning of plant necessary testing to be done for the satisfactory of Engineer Incharge. Note : Refer the ANNEXURE : F for Detailed Specification of Each Each 1 0

Fixtures for doors and windows.

1 12.59 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. No 5 0

2 12.69 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. 12.69.2 125mm No 20 0

3 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. No 5 0

4 12.65 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. No 5 0

5 22.15.4 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Aldrop 16mm dia, 300mm No 10 0

6 12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete No 5 0

7 22.15.2 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Handles 300mm No 10 0

For Second Floor

1 2.5 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) 2.5.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 0

2 Addendum I-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70% m3 0

3 Addendum II-Additionalities for formwork, Centering & Scaffolding " For Beams & lintels of Buildings " at 60% m3 0

4 Addendum I-Additionalities for formwork, Centering & Scaffolding " For Chejjas, Canopy & Other Architectural projections of monor sections " at 45% m3 0

5 Addendum I-Additionalities for formwork, Centering & Scaffolding " For Roof slab of Buildings " at 50% m3 0

6 Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 0

7 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. t 0

8 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0

9 12.15 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) m2 0

10 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge. m3 0

11 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. m2 0

12 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) m2 0

13 11.34B Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. kg 0

14 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 0

15 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m2 0

16 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 0

17 9.12 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. 9.12.2 Size of Tile 600x600 mm m2 0

18 Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. m2 0

19 10.19 Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, mortar, labour for all items of work, usage charges of machinery etc., complete as per specification. m2 0

20 8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 0

21 8.33.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 0

22 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) m2 0

23 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 0

24 11.28 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless-steel nuts and bolts complete, i/c fixing the railing with necessary accessories &stainless-steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. m2 0

25 10.1.1 'Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar loca tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. m2 0

26 Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/ structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.(c)Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.(d)Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. m2 0

27 Providing and fixing in position 12mm thick plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling tiles up to a height of 5 m above floor level over aluminium strips 25mm x 6mm and rendered smooth with plaster of paris including cost of materials, labour, curing complete as per specifications. m2 0

28 Providing & fixing vertical blinds of reputed make of shape 100mm regular fabric with powder coated aluminium channel, telting with PVC Chain system with all necessary fittings and fixtures as per direction of Engineer in charge m2 0

Water supply and Sanitation work

1 Supply of PVC pipe - OD 25mm and 10 Kg/sqcm m 0

2 Supply of PVC pipe - OD 32mm and 10 Kg/sqcm( Vol.5, P.No.A-44,I.No.654) m 10 0

3 Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Double Union Ball Valve 20mm Each 3 0

4 Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Double Union Ball Valve 25mm Each 3 0

5 Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Double Union Ball Valve 32mm No 3 0

6 Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded Elbow 20X1/2mm m 5 0

7 Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded Elbow 25X1/2mm m 5 0

8 Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded Elbow 32X1/2mm m 5 0

9 Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded Elbow 20X1/2mm m 5 0

10 Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded Elbow 25X1/2mm m 5 0

11 Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded Elbow 32X1/2mm m 5 0

12 Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded TEE 20X1/2mm m 5 0

13 Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded TEE 25X1/2mm m 5 0

14 Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded TEE 32X1/2mm m 5 0

15 Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Female Threaded TEE 20X1/2mm m 5 0

16 Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Female Threaded TEE 25X1/2mm m 5 0

17 Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Female Threaded TEE 32X1/2mm m 5 0

18 Providing and fixing brass stop cock of approved quality :15 mm nominal bore m 5 0

19 Providing and fixing gun metal non- return valve of approved quality (screwed end) :50 mm nominal bore Horizontal ( Vol.2, P.No.118- I.No.13.6.4.1) m 3 0

20 Providing and fixing gun metal non- return valve of approved quality (screwed end) :32 mm nominal bore Horizontal ( Vol.2, P.No.118- I.No.13.6.2.1) m 3 0

21 Poly Propylene Random Co-polymer (PPR) pipe with fitting SDR 7.4 -50 mm Outer dia m 10 0

22 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid m 0 0

23 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps m 1 0

24 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.(Vol.2, P.No.136 I.No.14.31) m 2 0

25 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.(Vol.2, P.No.137 I.No.14.40.2) m 2 0

26 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :* 100 mm inlet and 75 mm outlet *Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 (Vol.2, P.No.124 I.No.13.46) m 4 0

27 Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0 HDPE Grade PE80-PN10.0,110mm dia (Vol.5, P.No.96 I.No.9.3.4) m 0 0

28 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes (Vol.2, P.No.122 I.No.13.31.2) m 10 0

29 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 25 mm nominal dia Pipes (Vol.2, P.No.122 I.No.13.31.3 m 10 0

30 Supply of PVC pipe - OD 110mm and 6 Kg/sqcm (Vol.5, P.No.A-44 I.No.647) m 10 0

31 Supply of PVC pipes of 8 Kg/cm2 for 75mm(0.917)( Vol.5, P.No.A-45 I.No.680) No 10 0

32 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments( Vol.5, P.No.117 I.No.10.9) 75 mm dia PVC Elbows No 10 0

33 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments( Vol.5, P.No.117 I.No.10.9) 110 mm dia PVC Elbows No 10 0

34 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter etc. complete as directed by the engineer-in-charge. m 28.8 0

35 13.31 Providing and fixing Chorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamp at 1 00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-charge. Internal work -Exposed on wall 25mm nominal OD Pipe m 10 0

36 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 m 394 m 10 0

37 13.17 Providing and fixing PTMT bib cock of approved quality and colour 13.17.4 15 mm nominal bore, 90 mm long, No 2 0

38 13.18 Providing and fixing PTMT stop cock of approved quality and colour 13.18.1 15 mm nominal bore, 86 mm long, weighing not less than 88 g No 2 0

39 Water purification plants: Providing, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per the enclosed detailed Technical Specifications including cost of material, loading and unloading and as directed by the Engineer in charge. (Ref- detailed specification enclosed seperatly). Note:- 1.The above rates mentioned are only for the preparation of estimate purpose. 2. All items are to be of BSI /NFS standards,with BSI / NFS mark . 3. Tenders to be invited for procurement. 4. No direct payment should be made under any situation or condition or on any account. 5. After commissioning of plant necessary testing to be done for the satisfactory of Engineer Incharge. Note : Refer the ANNEXURE : F for Detailed Specification of Each Each 1 0

Fixtures for doors and windows.

1 12.59 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. No 6 0

2 12.69 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. 12.69.2 125mm No 24 0

3 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. No 6 0

4 12.65 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. No 6 0

5 22.15.4 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Aldrop 16mm dia, 300mm No 12 0

6 12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete No 6 0

7 22.15.2 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Handles 300mm No 12 0

For Third floor (Terrace)

1 2.5 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) 2.5.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 0

2 Addendum I-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70% m3 0

3 Addendum II-Additionalities for formwork, Centering & Scaffolding " For Beams & lintels of Buildings " at 60% m3 0

4 Addendum I-Additionalities for formwork, Centering & Scaffolding " For Chejjas, Canopy & Other Architectural projections of monor sections " at 45% m3 0

5 Addendum I-Additionalities for formwork, Centering & Scaffolding " For Roof slab of Buildings " at 50% m3 0

6 Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 0

7 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. m3 0

8 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m3 0

9 12.15 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) m2 0

10 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. m3 0

11 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 0

12 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m2 0

13 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 0

14 9.12 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. 9.12.2 Size of Tile 600x600 mm m2 0

15 8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 0

16 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) m2 0

17 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 0

18 15.1 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. m2 0

Water supply and Sanitation work

1 Supply of PVC pipe - OD 25mm and 10 Kg/sqcm m 0

2 Supply of PVC pipe - OD 32mm and 10 Kg/sqcm( Vol.5, P.No.A-44,I.No.654) m 10 0

3 Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Double Union Ball Valve 20mm Each 2 0

4 Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Double Union Ball Valve 25mm Each 2 0

5 Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Double Union Ball Valve 32mm No 2 0

6 Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded Elbow 20X1/2mm No 2 0

7 Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded Elbow 25X1/2mm No 2 0

8 Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded Elbow 32X1/2mm m 2 0

9 Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded Elbow 20X1/2mm m 2 0

10 Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded Elbow 25X1/2mm m 2 0

11 Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded Elbow 32X1/2mm m 2 0

12 Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded TEE 20X1/2mm m 2 0

13 Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded TEE 25X1/2mm m 2 0

14 Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Male Threaded TEE 32X1/2mm m 2 0

15 Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Female Threaded TEE 20X1/2mm m 2 0

16 Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Female Threaded TEE 25X1/2mm m 2 0

17 Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 PPR Female Threaded TEE 32X1/2mm m 2 0

18 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.) L 0

19 Providing and fixing brass stop cock of approved quality :15 mm nominal bore m 2 0

20 Providing and fixing gun metal non- return valve of approved quality (screwed end) :50 mm nominal bore Horizontal ( Vol.2, P.No.118- I.No.13.6.4.1) m 2 0

21 Providing and fixing gun metal non- return valve of approved quality (screwed end) :32 mm nominal bore Horizontal ( Vol.2, P.No.118- I.No.13.6.2.1) m 2 0

22 Poly Propylene Random Co-polymer (PPR) pipe with fitting SDR 7.4 -50 mm Outer dia m 10 0

23 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid m 0 0

24 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps m 1 0

25 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.(Vol.2, P.No.136 I.No.14.31) m 0 0

26 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.(Vol.2, P.No.137 I.No.14.40.2) m 0 0

27 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :* 100 mm inlet and 75 mm outlet *Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 (Vol.2, P.No.124 I.No.13.46) m 0 0

28 Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0 HDPE Grade PE80-PN10.0,110mm dia (Vol.5, P.No.96 I.No.9.3.4) m 10 0

29 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes (Vol.2, P.No.122 I.No.13.31.2) m 10 0

30 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 25 mm nominal dia Pipes (Vol.2, P.No.122 I.No.13.31.3 m 10 0

31 Supply of PVC pipe - OD 110mm and 6 Kg/sqcm (Vol.5, P.No.A-44 I.No.647) m 10 0

32 Supply of PVC pipes of 8 Kg/cm2 for 75mm(0.917)( Vol.5, P.No.A-45 I.No.680) m 2 0

33 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments( Vol.5, P.No.117 I.No.10.9) 75 mm dia PVC Elbows m 2 0

34 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments( Vol.5, P.No.117 I.No.10.9) 110 mm dia PVC Elbows m 2 0

35 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter etc. complete as directed by the engineer-in-charge. m 6 0

36 13.31 Providing and fixing Chorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamp at 1 00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-charge. Internal work -Exposed on wall 25mm nominal OD Pipe m 10 0

37 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 m 394 m 10 0

38 13.17 Providing and fixing PTMT bib cock of approved quality and colour 13.17.4 15 mm nominal bore, 90 mm long, No 2 0

39 13.18 Providing and fixing PTMT stop cock of approved quality and colour 13.18.1 15 mm nominal bore, 86 mm long, weighing not less than 88 g No 2 0

Fixtures for doors and windows.

1 12.69 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. 12.69.2 125mm No 8 0

2 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. No 8 0

3 12.65 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. No 2 0

4 22.15.4 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Aldrop 16mm dia, 300mm No 4 0

5 12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete No 2 0

6 22.15.2 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Handles 300mm No 4 0

Cement Concrete Drain

1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m (I.N:1.14.1/PN-8,Vol-1) m3 48.75 0

2 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates (I.N:2.1.3/PN-15,Vol-1) m3 7.5 0

3 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Super structure of Bridges (I.N:2.11,d/PN-18,Vol-1) t 1.53 0

4 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, includingall lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(I.N:2.4.2/PN-16,Vol-1) m3 20.38 0

5 Formwork for CC drain @ 35% m3 20.38 0

1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work 1.14.1 In all kinds of soils Depth upto 3 m m3 60.32 0

2 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) 2.1.3 Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates m3 6213.9 0

3 2.2 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) 2.2.2.1 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 6538.35 0

4 Addendum I-Additionalities for formwork, Centering & Scaffolding " For Foundation upto Plinth (a) Isolated " at 8% m3 0

5 2.4 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) 2.4.3 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 7.57 0

6 Addendum II-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70% m3 1.05 0

7 Addendum I -Additionalities for formwork, Centering & Scaffolding " For Plinth Beams of Buildings " at 50% m3 0

8 2.5 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) 2.5.2 M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m3 3.43 0

9 Addendum I-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70% m3 3.43 0

10 5.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) upto plinth level with: 5.1.1 Cement mortar 1:6 (1 cement: 6 coarse sand) m3 20.52 0

11 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m3 21.51 0

12 6.15 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m2 43.25 0

13 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. t 1.73 0

14 11.34B Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. Kg 1425.6 0

15 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m2 380.1 0

16 8.33.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 0

17 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m2 182.7 0

18 Providing flooring with 25mm thick polished Cuddapah slabs usingcement mortar 1:6, 25mm thick over existing cement concrete bed ortop of roof laid to line and level and jointed with cement slurry mixedwith pigment to match the shade of the slab , including cost of materials,labour, curing, polishing complete as per specifications. m2 20.96 0

Elecrical works (Internal)

1 Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 0

2 19/20mm dia 2mm thick Mtr 120 0

3 25 mm dia 2 mm thick Mtr 28 0

4 supplying heavy gauge PVC Conduit Pipe ….dia......mm thick with suitable size bends, metal junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run through out the conduit wherever necessary.

5 19/20mm dia 2mm thick Mtr 60 0

6 25mm dia 2mm thick Mtr 20 0

7 Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.

8 200x90x65mm Each 2 0

9 Supplying and fixing PVC/metal conduit accessories Deep junction box.

10 19/20mm deep junction box Each 15 0

11 25mm deep junction box Each 5 0

12 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, up to wall surface complete

13 up to 50mm conduit in brick wall Mtr 6 0

14 up to 50mm conduit CC floor Mtr 60 0

15 Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated completely

16 20mm Mtr 10 0

17 25mm Mtr 10 0

18 Short point up to 3Mtr from tapping point to out let via switch box Point 3 0

19 Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch box Point 5 0

20 Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box Point 6 0

21 Wiring for lighting/power circuit using one of FR PVC insulated 1100V grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS-694:1990 & confirming to the attached GTP of GROUP -A.

22 1.5 sqmm Mtr. 80 0

23 2.5 sqmm Mtr. 160 0

24 6 sqmm Mtr. 10 0

25 Supplying and mounting 2 Nos. of 2 way 6 amps flush type switches either surface/flush mounted on existing gang box or in 4mm thick plastic sheet and mounted on a flush mounted wooden box and wiring as required IS 1293 Each 10 0

26 6 Amps lamp holder No 13 0

27 1-3Way Each 2 0

28 4-5Way Each 1 0

29 6Way Each 1 0

30 10-12Way Each 1 0

31 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.

32 1 to 3 Module Each 2 0

33 4 Moudule Each 1 0

34 6Moudule Each 1 0

35 10 - 12Moudule Each 1 0

36 16 -18 Moudule Each 2 0

37 Supplying and fixing of modular switch existing modular switch plate as per IS 3854 and IS 1293

38 6Amps one way. Each 15 0

39 6Amps 3way socket. Each 2 0

40 16Amps one way switch Each 4 0

41 6/16Amps universal socket Each 4 0

42 Supplying and fixing hylum brand plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws. Sq Cm 1200 0

43 Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size ……mm conduit using necessary machine screws.

44 80mm to 90 mm No 14 0

46 Supplying and fixing of slim box fitting, made out of CRCA Sheet metal body with locking type holder completely wired. Excluding Ballast & Fluorescent Tube.

47 1 x 4' Tube light fitting. Each 7 0

48 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.

49 63 A Each 6 0

50 Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.

52 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA.

53 On wall/ ceiling / Rafter / Girders Each 7 0

54 Supplying and Fixing........mm dia class A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole, using suitable clA, bolts, nuts and wiring using suitable capacity wires.

55 Using 32mm dia G.I.Pipe Each 4 0

56 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V @50/60Hz & Power factor >0.9 along with CE approved. 2years Warranty against any manufacturing defect workingunder standard electrical condition

57 LED square or round down light 10-12W Each 4 0

58 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required.

59 6-32Amps SP Each 1 0

60 6-32 Amps DP Each 1 0

61 40 Amps TPN Each 2 0

62 Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitable earthing system, on wall/wood board/flush mounting using required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCB's as outgoings confirming to IS/IEC 60898 - 2.

63 4 Way TP & N Each 2 0

64 Fabricating supplying and mounting MS box made out SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete.

66 Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws. cm2 58000 0

67 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.

69 Supplying A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete

70 100A 4 x 30 x 6 mm Aluminium Strips Mtr. 1.2 0

71 Wiring for lighting/power circuit using one of FR PVC insulated 1100V grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS-694:1990 & confirming to the attached GTP of GROUP -A.

72 1.5 sqmm Mtr. 20 0

73 2.5 sqmm Mtr. 20 0

74 4 sqmm Mtr. 20 0

77 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.

78 6-32 A SP Each 8 0

79 6-32 A TPN Each 1 0

80 40 A DP Each 4 0

81 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection forShort-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.

82 100A 25kA Each 1 0

83 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board. Each 1 0

84 Supplying, fixing and wiring rotary selector switch suitable for Ammeter Each 2 0

85 Supplying, fixing and wiring rotary selector switch suitable for Voltmeter Each 1 0

86 Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter Each 1 0

87 Supplying and fixing of Shunt trip suitable for MCCB.CBCT Each 1 0

88 Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired. Each 1 0

89 Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. Each 6 0

90 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. Each 3 0

91 11.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975

92 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) KM 0.18 0

93 Laying of cable in Existing Trench/GI pipe/ Stone Ware /RCC Hume pipe using Wooden /Aluminum Rollers as directed by the departmental staff PART -IV, PAGE NO - 9

94 2.5 to 25 Sqmm PER KM RATE 16159 Mtr 0.18 0

95 Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed.PART -IV ,..PAGE NO - 8

96 In Hard Soil .5x.75 x 60 = 5cmt CUM 20.2 0

97 Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead of 200 Mtr PART- IV , PAGE NO-8 CUM 20.5 0

98 Laying the GI Pipe 80 mm to 150 mm dia at Drainage Water Supply Crossing including fixing collars elbows, bends, Tees and other fitting with Cuts and Threads wherever necessary complete.PART NO-IV, PAGR -8 Mtr 6 0

99 GI Pipe - 50 mm Dia Mtr 6 0

100 GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long,3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg PART-III, PAGE NO-17 No 4 0

101 Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each PART-III PAGE NO-17 No 4 0

102 Good Quality Salt for grounding purposes packed in 50 Kg gunny bag PART-III PAGE NO-17 Bag 4 0

103 Digging of Pit for providing GI Pipe type Earthing LABOUR RATE PART -IV PAGE NO - 1

104 Ordinary Soil Per Pit 4 0

Diesel Generator Set

1 RCC Pole - 9 Mtr Long, 145 Kg WL (Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785 No 4 0

2 PSCC Pole - 9 Mtr Long, 200 Kg WL (Dwg No. BESCOM/GM/QS&S/50 Dtd 24.11.2018) as per REC Standards No 2 0

3 Spiral Earth Electrode No 2 0

4 11 kV, Horizontal Cross Arm - Galvanised Iron (GI) No 2 0

5 11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod) 6 0

6 11 kV, 45 kN Polymeric Insulator No 6 0

7 Rabbit ACSR (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM KM 0.5 0

8 11 kV, HG Fuse Unit with Solid Core Insulator (Dwg No. BESCOM/GM/QS&S/21 Dtd 24.11.2018) Set (3 Nos) 1 0

9 11 kV, 200 Amps Single Break GOS (Dwg No. BESCOM/GM/QS&S/23 Dtd 24.11.2018) Set 1 0

10 LT Protection Kit (Dwg No. BESCOM/GM/QS&S/10 Dtd 24.11.2018) No 1 0

11 250 kVA, Aluminium Wdg, Star 2 (5 Star) No 1 0

12 H - Frame Set for fixing 11 kV, 200 Amps Single Break GOS - (For DP structure for providing New GOS for sectionalisation) - MS Set 1 0

13 For 100/300 kVA 4/5 Star Rated Transformer on RCC Pole - 9 Mtr Long, 145 Kg WL - MS Set 1 0

14 LT Metering Cubicle at Low Tension for 50 KW to 150 KW having specification & design as per the prototype approval (Excluding Meter Cost & Modem Cost) Unit 1 0

15 Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth No 4 0

16 Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth No 2 0

17 Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,) No 2 0

18 Fixing guarding including fixing of necessary cross arms for existing HT and LT line at Road Crossing, Telephone Line Crossings upto span of 60 Mtr Per Set 4 0

19 do - for Rabbit ACSR Per KM/Wire 0.5 0

20 Fixing of GOS including wiring (11 kV Single Break 200 Amps) Set 1 0

21 Fixing of LT Protection Kit Per Kit 1 0

22 Erection of 200 - 250 kVA Transformer Each 1 0

23 For 100 to 250 kVA Per Structure 1 0

24 Erection of LT metering Cubicle on Platform. NO 1 0

25 Use of special hardware for longer life, Insulation material meets exacting IS 8183 specifications for better sound attenuation, Flush styling - no projections, Fluid drains for lube oil and fuel, Fuel filling point inside the enclosure. The complete set shall have sufficient safety and adhere to NEC, NBC 2016, IEC, CPWD specifications, PCB norms and KSGEI Acts and Rules.

26 62.5KVA/50kw Set 1 0

27 Supply, Erection, testing and commissioning of AMF panel suitable for .....kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, aluminium Bus Bar with the accommodation for .....A 4 pole contactor for alternator with thermal O/L relay,..... A 4 pole contactor for mains, HRC fuse for short circuit protection, Microprocessor based AMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stop logic, Mains/generator voltage, ....capacity bypass switch and frequency sensing, PCC 1301controller with water temperature/Lube oil pressure/ engine speed, Voltage/ampere/Frequency/ kVA, Running-hour count, No of starts, Fault indication, over / under speed, Fails to start, Low oil pleasure, High engine temperature, Under/over voltage, over current, Earth fault relay, with indications for Mains on, Load on Mains, Battery charger on Push buttons AMF module by pass Mode, Battery charger unit with inbuilt Auto/Manual and Flat/Boost facility. The complete set shall have sufficient safety and adhere to NEC, NBC 2016, IEC, CPWD specifications, PCB norms and KSGEI Acts and Rules.

28 62.5 KVA Each 1 0

29 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia No 6 0

30 GI/Copper strips for grounding connections, using necessary fixing materials as required.

31 GI/Copper strips 25 x 3 mm GI strip m 50 0

Ground Floor-ELECTRIFICATION (INTERNAL)

1 Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary

2 19/20mm dia 2mm thick Mtr 260 0

3 25 mm dia 2 mm thick Mtr 55 0

4 supplying heavy gauge PVC Conduit Pipe ….dia......mm thick with suitable size bends, metal junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run through out the conduit wherever necessary.

5 19/20mm dia 2mm thick Mtr 120 0

6 25mm dia 2mm thick Mtr 80 0

7 Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.

8 200x90x65mm Each 2 0

9 Supplying and fixing PVC/metal conduit accessories Deep junction box.

10 19/20mm deep junction box Each 40 0

11 25mm deep junction box Each 15 0

12 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, up to wall surface complete

13 up to 50mm conduit in brick wall Mtr 10 0

14 up to 50mm conduit CC floor Mtr 15 0

15 Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated completely

16 20mm Mtr 10 0

17 25mm Mtr 10 0

18 Supplying And Fixing Metal Fan Box with Round Hook. NO 10 0

19 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.

20 Short point up to 3Mtr from tapping point to out let via switch box Point 11 0

21 Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch box Point 16 0

22 Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box Point 12 0

23 Wiring for lighting/power circuit using one of FR PVC insulated 1100V grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS-694:1990 & confirming to the attached GTP of GROUP -A.

24 1.5 sqmm Mtr. 210 0

25 2.5 sqmm Mtr. 420 0

26 6 sqmm Mtr. 10 0

28 Supplying and mounting 2 Nos. of 2 way 6 amps flush type switches either surface/flush mounted on existing gang box or in 4mm thick plastic sheet and mounted on a flush mounted wooden box and wiring as required IS 1293 Each 10 0

29 Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board.

30 6 Amps lamp holder No 25 0

31 Supplying and flush mounting powder coated / galavanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

32 1-3Way Each 3 0

33 4-5Way Each 1 0

34 6Way Each 2 0

35 8Way Each 2 0

36 10-12Way Each 4 0

37 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.

38 1 to 3 Module Each 3 0

39 4 Moudule Each 1 0

40 6Moudule Each 2 0

41 8Moudule Each 2 0

42 10 - 12Moudule Each 4 0

43 16 -18 Moudule Each 2 0

44 Supplying and fixing of modular switch existing modular switch plate as per IS 3854 and IS 1293

45 6Amps one way. Each 48 0

46 6Amps 3way socket. Each 17 0

47 Stepped Fan Regulator. Each 10 0

48 16Amps one way switch Each 4 0

49 6/16Amps universal socket Each 4 0

50 Supplying and fixing hylum brand plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws. Sq Cm 1200 0

51 80mm to 90 mm No 39 0

53 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.

54 12" Sweep (300 mm) Each 2 0

55 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system.

56 48" Sweep (1200 mm) Regular model Each 10 0

57 Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI> 70%. efficacy >80 lumen per W, life> 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF > 0.95, power loss should < 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.

59 Supplying and fixing of slim box fitting, made out of CRCA Sheet metal body with locking type holder completely wired. Excluding Ballast & Fluorescent Tube.

60 1 x 4' Tube light fitting. Each 20 0

61 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.

62 63 A Each 6 0

63 Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.

65 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA.

66 On wall/ ceiling / Rafter / Girders Each 20 0

67 Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired.

68 Extra length of GI pipe of class B 19mm dia for down rod. m 10 0

69 Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. Each 4 0

70 Supplying and Fixing........mm dia class A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole, using suitable clA, bolts, nuts and wiring using suitable capacity wires.

71 Using 32mm dia G.I.Pipe Each 4 0

72 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V @50/60Hz & Power factor >0.9 along with CE approved. 2years Warranty against any manufacturing defect workingunder standard electrical condition

73 LED square or round down light 10-12W Each 2 0

74 Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires. Each 81 0

75 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required.

76 6-32Amps SP Each 3 0

77 6-32 Amps DP Each 1 0

78 40 Amps TPN Each 2 0

79 Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitable earthing system, on wall/wood board/flush mounting using required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCB's as outgoings confirming to IS/IEC 60898 - 2.

80 8 Way SP & N Each 1 0

81 4 Way TP & N Each 2 0

First Floor-ELECTRIFICATION (INTERNAL)

1 Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary

2 19/20mm dia 2mm thick Mtr 280 0

3 25 mm dia 2 mm thick Mtr 60 0

4 supplying heavy gauge PVC Conduit Pipe ….dia......mm thick with suitable size bends, metal junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run through out the conduit wherever necessary.

5 19/20mm dia 2mm thick Mtr 125 0

6 25mm dia 2mm thick Mtr 60 0

7 Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.

8 200x90x65mm Each 2 0

9 Supplying and fixing PVC/metal conduit accessories Deep junction box.

10 19/20mm deep junction box Each 42 0

11 25mm deep junction box Each 15 0

12 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, up to wall surface complete

13 up to 50mm conduit in brick wall Mtr 10 0

14 up to 50mm conduit CC floor Mtr 15 0

15 Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated completely

16 20mm Mtr 10 0

17 25mm Mtr 10 0

18 Supplying And Fixing Metal Fan Box with Round Hook. NO 8 0

19 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.

20 Short point up to 3Mtr from tapping point to out let via switch box Point 13 0

21 Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch box Point 15 0

22 Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box Point 11 0

23 Wiring for lighting/power circuit using one of FR PVC insulated 1100V grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS-694:1990 & confirming to the attached GTP of GROUP -A.

24 1.5 sqmm Mtr. 220 0

25 2.5 sqmm Mtr. 440 0

26 6 sqmm Mtr. 20 0

28 Supplying and mounting 2 Nos. of 2 way 6 amps flush type switches either surface/flush mounted on existing gang box or in 4mm thick plastic sheet and mounted on a flush mounted wooden box and wiring as required IS 1293 Each 10 0

29 Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board.

30 6 Amps lamp holder No 30 0

31 Supplying and flush mounting powder coated / galavanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

32 1-3Way Each 4 0

33 4-5Way Each 1 0

34 6Way Each 2 0

35 8Way Each 2 0

36 10-12Way Each 4 0

37 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.

38 1 to 3 Module Each 4 0

39 4 Moudule Each 1 0

40 6Moudule Each 2 0

41 8Moudule Each 2 0

42 10 - 12Moudule Each 4 0

43 16 -18 Moudule Each 2 0

44 Supplying and fixing of modular switch existing modular switch plate as per IS 3854 and IS 1293

45 6Amps one way. Each 48 0

46 6Amps 3way socket. Each 8 0

47 Stepped Fan Regulator. Each 8 0

48 16Amps one way switch Each 4 0

49 6/16Amps universal socket Each 4 0

50 Supplying and fixing hylum brand plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws. Sq Cm 1200 0

51 Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size ……mm conduit using necessary machine screws.

52 80mm to 90 mm No 39 0

54 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.

55 12" Sweep (300 mm) Each 2 0

56 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system.

57 48" Sweep (1200 mm) Regular model Each 8 0

58 Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI> 70%. efficacy >80 lumen per W, life> 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF > 0.95, power loss should < 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.

60 Supplying and fixing of slim box fitting, made out of CRCA Sheet metal body with locking type holder completely wired. Excluding Ballast & Fluorescent Tube.

61 1 x 4' Tube light fitting. Each 23 0

62 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.

63 63 A Each 6 0

64 Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.

66 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA.

67 On wall/ ceiling / Rafter / Girders Each 23 0

68 Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired.

69 Extra length of GI pipe of class B 19mm dia for down rod. m 8 0

70 Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. Each 4 0

71 Supplying and Fixing........mm dia class A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole, using suitable clA, bolts, nuts and wiring using suitable capacity wires.

72 Using 32mm dia G.I.Pipe Each 4 0

73 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V @50/60Hz & Power factor >0.9 along with CE approved. 2years Warranty against any manufacturing defect workingunder standard electrical condition

74 LED square or round down light 10-12W Each 2 0

75 Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires. Each 81 0

76 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required.

77 6-32Amps SP Each 3 0

78 6-32 Amps DP Each 1 0

79 40 Amps TPN Each 2 0

80 Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitable earthing system, on wall/wood board/flush mounting using required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCB's as outgoings confirming to IS/IEC 60898 - 2.

81 8 Way SP & N Each 1 0

82 4 Way TP & N Each 2 0

Second Floor-ELECTRIFICATION (INTERNAL)

1 Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary

2 19/20mm dia 2mm thick Mtr 290 0

3 25 mm dia 2 mm thick Mtr 70 0

4 supplying heavy gauge PVC Conduit Pipe ….dia......mm thick with suitable size bends, metal junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run through out the conduit wherever necessary.

5 19/20mm dia 2mm thick Mtr 130 0

6 25mm dia 2mm thick Mtr 120 0

7 Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.

8 200x90x65mm Each 2 0

9 Supplying and fixing PVC/metal conduit accessories Deep junction box.

10 19/20mm deep junction box Each 42 0

11 25mm deep junction box Each 15 0

12 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, up to wall surface complete

13 up to 50mm conduit in brick wall Mtr 10 0

14 up to 50mm conduit CC floor Mtr 15 0

15 Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated completely

16 20mm Mtr 10 0

17 25mm Mtr 10 0

18 Supplying And Fixing Metal Fan Box with Round Hook. NO 14 0

19 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.

20 Short point up to 3Mtr from tapping point to out let via switch box Point 10 0

21 Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch box Point 17 0

22 Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box Point 14 0

23 Wiring for lighting/power circuit using one of FR PVC insulated 1100V grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS-694:1990 & confirming to the attached GTP of GROUP -A.

24 1.5 sqmm Mtr. 250 0

25 2.5 sqmm Mtr. 500 0

26 6 sqmm Mtr. 480 0

28 Supplying and mounting 2 Nos. of 2 way 6 amps flush type switches either surface/flush mounted on existing gang box or in 4mm thick plastic sheet and mounted on a flush mounted wooden box and wiring as required IS 1293 Each 10 0

29 Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board.

30 6 Amps lamp holder No 28 0

31 Supplying and flush mounting powder coated / galavanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

32 1-3Way Each 4 0

33 4-5Way Each 2 0

34 6Way Each 2 0

35 8Way Each 6 0

36 10-12Way Each 3 0

37 16 Way Each 2 0

38 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.

39 1 to 3 Module Each 4 0

40 4 Moudule Each 2 0

41 6Moudule Each 2 0

42 8Moudule Each 6 0

43 10 - 12Moudule Each 3 0

44 16 -18 Moudule Each 2 0

45 Supplying and fixing of modular switch existing modular switch plate as per IS 3854 and IS 1293

46 6Amps one way. Each 57 0

47 6Amps 3way socket. Each 28 0

48 Stepped Fan Regulator. Each 14 0

49 16Amps one way switch Each 4 0

50 6/16Amps universal socket Each 4 0

51 Supplying and fixing hylum brand plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws. Sq Cm 1200 0

52 Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size ……mm conduit using necessary machine screws.

53 80mm to 90 mm No 42 0

55 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system.

56 48" Sweep (1200 mm) Regular model Each 14 0

57 Supplying and fixing of slim box fitting, made out of CRCA Sheet metal body with locking type holder completely wired. Excluding Ballast & Fluorescent Tube.

58 1 x 4' Tube light fitting. Each 25 0

59 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.

60 63 A Each 6 0

61 Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.

63 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA.

64 On wall/ ceiling / Rafter / Girders Each 75 0

65 Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired.

66 Extra length of GI pipe of class B 19mm dia for down rod. m 14 0

67 Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. Each 4 0

68 Supplying and Fixing........mm dia class A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole, using suitable clA, bolts, nuts and wiring using suitable capacity wires.

69 Using 32mm dia G.I.Pipe Each 4 0

70 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V @50/60Hz & Power factor >0.9 along with CE approved. 2years Warranty against any manufacturing defect workingunder standard electrical condition

71 LED square or round down light 10-12W Each 2 0

72 Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires. Each 81 0

73 6-32Amps SP Each 12 0

74 6-32 Amps DP Each 3 0

75 40 Amps TPN Each 2 0

76 Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitable earthing system, on wall/wood board/flush mounting using required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCB's as outgoings confirming to IS/IEC 60898 - 2.

77 8 Way SP & N Each 2 0

78 4 Way TP & N Each 2 0

Ground Floor-Furnitures

1 Peacock Chair:(Standard Company)Seat,and Back half cushion with cloth or Rexin No 40 0

2 Teak Wood-- Revolving chair : Chair upper construction seasoned teak wood with melomin polish, stainless steel 5 caster wheel legs, Hydraulic height adjustment. The chair shall be neatly finished and polished No 1 0

3 Side table for teak wood Executive table - Of size 36"x20". Teak wood Leg size 2"x2" with support patties of 2"x1.25". Covered 3 sides with 12mm ply with Veneer . Table to be provided with one Keyboard using Telescopic channels. No 2 0

4 Notice Board: Of size 4'x3' using 18mm plywood for body, back 8mm plywood and 12mm soft board with cloth. And 5mm plain glass for door with lock, and alluminium chanal with teak wood beading. Outerside laminated sheet or veneer with polish, inner side paint or polish. No 2 0

5 Providing and fixing storage unit of 0.75m width made out of 19mm thick commercial ply vertical support finished in approved 1.5mm laminate with 12mm thick ply packing internally finished with enamel paint of approved colour and shade shelves shall be formed out of 19mm ply finished with enamel paint of approved shade and colour and 19mm thick shutters formed out of 19mm thick ply finished with 1.5mm thick laminate of approved shade and colour etc., complete the rate includes cost of all materials, labour charges, completeas per specification. (Rate Per Sq.Mtr) Sq.mt. 12.5 0

6 Office Table : Of size 4'x2.5' made out of 12/18mm MDF one keyboard and 3 drawers on right side. Table to be covered with 1mm laminate whereever visible. Hardware of the drawer should be telescopic channels of SS handle with one lock. Table top should should be made with 25mm MDF along with edge bindin No 1 0

7 Computer Chair : Stainless steel base ABS seat and back cushion with arm Hydraulic Height adjustment. No 4 0

8 Teak wood Nagin Model 2 seater sofa : Made out of Teak wood ( Heavy Model ), Back legs of size 2"x7"x1.5" 2 nos, Front legs of size 6"x5"x5" 2 nos, 1"x4"x2" 2 nos , side patti 2"x4"x1.5", Handle 2"x4"x2" 2 nos, Base patti-2"x3"x1.25" 2 nos, Base length 4'x3"x1.25' 01 nos, and 4'x4"x1.5" 1 nos, and 4'x3"x1.5" 2 nos, seat and back pattis 2'x3"x1.75 - 18 or 20 nos teak wood reapers, Two seater sofa shall be neatly polished and finished No 2 0

9 Teak Wood Side Teapoy : Size 1.3/4' x1.3/4 ' x1.5' made out of 2"x2" legs 2"x1.1/4" and 3"x1.1/4" side bars. Top with 8mm glass & reapers shelf with polish. No 1 0

10 Teak Wood Executive Table : Of size 6'x2.5" or 6'x3' all pattis below the top to be of 4"x1.25", leg size 2.25"x2.25", one side 2 or 3 drawers, and another side one cabinet with shelf. Table 3 sides closed with OST Pre laminated sheet 12mm thickness. Complete with all accessories like 2 locks and handles with polish. Table shall be neatly finished and plished. For top 6mm plain glass with Diamond polish No 1 0

11 Table or computer Table : Of size 4'x2' made of PLPB ( Action tesa or century brand ) Table should consist of Right side 1 drawer wih 1 cup board inner side 1 shelf No 2 0

12 Teak Wood chair ( Heavy model ) : Seat with Teak wood planks back with 6 or 8 pattis. Made out of Teak wood 3"x1.75" back legs, 2.25"x2.25" front legs, Chair side bars 3"x1.25" back with 8 reapers, Chair size standard size, Neatly polished and finisged No 1 0

13 Computer Work Station of size 3' x2' per person : Providing and fixing of straight line work station. Made out of 18mm ply with 1mm laminate or 18mm PLPB ( action Tesa or Century Brand ) . Each work station should be of size 3'x2'. (W xD) and should be closed on three sides with 18mm thick or 4" verticals and Back, Each work station should have provision for Key board, CPU and wire manager to be provided No 1 0

First Floor-Furnitures

1 Peacock Chair:(Standard Company)Seat,and Back half cushion with cloth or Rexin No 40 0

2 Teak Wood-- Revolving chair : Chair upper construction seasoned teak wood with melomin polish, stainless steel 5 caster wheel legs, Hydraulic height adjustment. The chair shall be neatly finished and polished No 4 0

3 Side table for teak wood Executive table - Of size 36"x20". Teak wood Leg size 2"x2" with support patties of 2"x1.25". Covered 3 sides with 12mm ply with Veneer . Table to be provided with one Keyboard using Telescopic channels. No 4 0

4 Notice Board: Of size 4'x3' using 18mm plywood for body, back 8mm plywood and 12mm soft board with cloth. And 5mm plain glass for door with lock, and alluminium chanal with teak wood beading. Outerside laminated sheet or veneer with polish, inner side paint or polish. No 2 0

5 Providing and fixing storage unit of 0.75m width made out of 19mm thick commercial ply vertical support finished in approved 1.5mm laminate with 12mm thick ply packing internally finished with enamel paint of approved colour and shade shelves shall be formed out of 19mm ply finished with enamel paint of approved shade and colour and 19mm thick shutters formed out of 19mm thick ply finished with 1.5mm thick laminate of approved shade and colour etc., complete the rate includes cost of all materials, labour charges, completeas per specification. (Rate Per Sq.Mtr) Sq.mt. 20 0

6 Office Table : Of size 4'x2.5' made out of 12/18mm MDF one keyboard and 3 drawers on right side. Table to be covered with 1mm laminate whereever visible. Hardware of the drawer should be telescopic channels of SS handle with one lock. Table top should should be made with 25mm MDF along with edge bindin No 10 0

7 Computer Chair : Stainless steel base ABS seat and back cushion with arm Hydraulic Height adjustment. No 6 0

10 Teak Wood Executive Table : Of size 6'x2.5" or 6'x3' all pattis below the top to be of 4"x1.25", leg size 2.25"x2.25", one side 2 or 3 drawers, and another side one cabinet with shelf. Table 3 sides closed with OST Pre laminated sheet 12mm thickness. Complete with all accessories like 2 locks and handles with polish. Table shall be neatly finished and plished. For top 6mm plain glass with Diamond polish No 1 0

11 Table or computer Table : Of size 4'x2' made of PLPB ( Action tesa or century brand ) Table should consist of Right side 1 drawer wih 1 cup board inner side 1 shelf No 2 0

12 Computer Table : Of size 3'x2' made of PLPB ( Action tesa or century brand ) Table should consist of 1 drawer wih lock on right side and 1 Key board, Table should be provided with 12" modesty panel on back side No 4 0

13 Teak Wood chair ( Heavy model ) : Seat with Teak wood planks back with 6 or 8 pattis. Made out of Teak wood 3"x1.75" back legs, 2.25"x2.25" front legs, Chair side bars 3"x1.25" back with 8 reapers, Chair size standard size, Neatly polished and finisged No 3 0

14 Computer Work Station of size 3' x2' per person : Providing and fixing of straight line work station. Made out of 18mm ply with 1mm laminate or 18mm PLPB ( action Tesa or Century Brand ) . Each work station should be of size 3'x2'. (W xD) and should be closed on three sides with 18mm thick or 4" verticals and Back, Each work station should have provision for Key board, CPU and wire manager to be provided No 2 0

15 Teak Wood Book Rack with glass : Of sisize 6'x3'x18". Leg size 2"x2" frame of 2"x1" wherever necessory. All 3 sides 12mm lamination with 18mm 3 shelves, with glass sheters. No 20 0

Second Floor-Furnitures

1 Peacock Chair:(Standard Company)Seat,and Back half cushion with cloth or Rexin No 60 0

2 Teak Wood-- Revolving chair : Chair upper construction seasoned teak wood with melomin polish, stainless steel 5 caster wheel legs, Hydraulic height adjustment. The chair shall be neatly finished and polished No 8 0

3 Side table for teak wood Executive table - Of size 36"x20". Teak wood Leg size 2"x2" with support patties of 2"x1.25". Covered 3 sides with 12mm ply with Veneer . Table to be provided with one Keyboard using Telescopic channels. No 4 0

4 Notice Board: Of size 4'x3' using 18mm plywood for body, back 8mm plywood and 12mm soft board with cloth. And 5mm plain glass for door with lock, and alluminium chanal with teak wood beading. Outerside laminated sheet or veneer with polish, inner side paint or polish. No 2 0

5 Providing and fixing storage unit of 0.75m width made out of 19mm thick commercial ply vertical support finished in approved 1.5mm laminate with 12mm thick ply packing internally finished with enamel paint of approved colour and shade shelves shall be formed out of 19mm ply finished with enamel paint of approved shade and colour and 19mm thick shutters formed out of 19mm thick ply finished with 1.5mm thick laminate of approved shade and colour etc., complete the rate includes cost of all materials, labour charges, completeas per specification. (Rate Per Sq.Mtr) Sq.mt. 20 0

6 Office Table : Of size 4'x2.5' made out of 12/18mm MDF one keyboard and 3 drawers on right side. Table to be covered with 1mm laminate whereever visible. Hardware of the drawer should be telescopic channels of SS handle with one lock. Table top should should be made with 25mm MDF along with edge bindin No 2 0

7 Computer Chair : Stainless steel base ABS seat and back cushion with arm Hydraulic Height adjustment. No 15 0

8 Teak wood Nagin Model 2 seater sofa : Made out of Teak wood ( Heavy Model ), Back legs of size 2"x7"x1.5" 2 nos, Front legs of size 6"x5"x5" 2 nos, 1"x4"x2" 2 nos , side patti 2"x4"x1.5", Handle 2"x4"x2" 2 nos, Base patti-2"x3"x1.25" 2 nos, Base length 4'x3"x1.25' 01 nos, and 4'x4"x1.5" 1 nos, and 4'x3"x1.5" 2 nos, seat and back pattis 2'x3"x1.75 - 18 or 20 nos teak wood reapers, Two seater sofa shall be neatly polished and finished No 2 0

9 Teak Wood Side Teapoy : Size 1.3/4' x1.3/4 ' x1.5' made out of 2"x2" legs 2"x1.1/4" and 3"x1.1/4" side bars. Top with 8mm glass & reapers shelf with polish. No 2 0

10 Teak Wood Executive Table : Of size 6'x2.5" or 6'x3' all pattis below the top to be of 4"x1.25", leg size 2.25"x2.25", one side 2 or 3 drawers, and another side one cabinet with shelf. Table 3 sides closed with OST Pre laminated sheet 12mm thickness. Complete with all accessories like 2 locks and handles with polish. Table shall be neatly finished and plished. For top 6mm plain glass with Diamond polish No 2 0

11 Table or computer Table : Of size 4'x2' made of PLPB ( Action tesa or century brand ) Table should consist of Right side 1 drawer wih 1 cup board inner side 1 shelf No 4 0

12 Computer Table : Of size 3'x2' made of PLPB ( Action tesa or century brand ) Table should consist of 1 drawer wih lock on right side and 1 Key board, Table should be provided with 12" modesty panel on back side No 4 0

13 Teak Wood chair ( Heavy model ) : Seat with Teak wood planks back with 6 or 8 pattis. Made out of Teak wood 3"x1.75" back legs, 2.25"x2.25" front legs, Chair side bars 3"x1.25" back with 8 reapers, Chair size standard size, Neatly polished and finisged No 2 0

14 Computer Work Station of size 3' x2' per person : Providing and fixing of straight line work station. Made out of 18mm ply with 1mm laminate or 18mm PLPB ( action Tesa or Century Brand ) . Each work station should be of size 3'x2'. (W xD) and should be closed on three sides with 18mm thick or 4" verticals and Back, Each work station should have provision for Key board, CPU and wire manager to be provided No 15 0

15 Teak wood bench with back: Size : 182.88cm L x 46cm W x 96cm H Legs 4.4x4.44cm. Patties at to & Bottom aound 5.68x2.54cm in section and polished seat shall be provided with 18 mm block board with laminated sheet on the top of the Block Board. Back with Teak wood patti. No 4 0

16 Student Desk : Of Size : 4' Length x2.5' Height Bench top 12", Desk top 15" using 1"x2" Sq.pipe and 20G book shelf, 18mm Brown/ Teak Colour PLPB (Action Tesa Brand) for Bench & Desk. No 30 0

17 Conference Table :( Plywood with Laminated Top ) Of size height 2.5' x width 2', Made out of 18mm plywood top for front and top. With both side laminated and front side closed. Inner side shall be provided suitable vertical support of 36mm plywood, Table Inner side shall be polish or paint. (Rate Per running ft..) Rft 25 0

Air Conditioners

1 Supplying ......TR split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed compressor with air cooled condenser, motor capacitor and start run capacitors, relay and over load protector internal unit, with one indoor and one outdoor unit The condenser unit will be placed outside the room on the terrace to avoid noise including standard length of suitable size copper tubing covered with insulation tube. (High wall chorded/cordless) suitable capacity 3 core sheathed/ PVC copper cable and a battery operated wireless remote unit

2 2 Ton capacity Each 10 0

3 Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C. Each 10 0

4 Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression, operating at 00 C to 400 C. Range etc., complete.

5 5kVA Capacity Each 10 0

6 Extra for Fabrication supply and fixing of Stand fabricated using slotted angle /L angle of size 6mm x 50mm for mounting out door/indoor A.C. unit/ Batteries. Each 10 0

7 Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas charging for additional piping length of tube.

1 Design, supplying, erecting testing and commissioning of - Passenger/ Bed-cum-passenger hospital lift with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine room for the available well size, operating at 415 V 3 phase 50 cycles AC supply, powder coated / Stainless Steel car entrance doors enclosures with suitable colour vinyl flooring, LED car illumination, emergency light, intercom and fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device with batteries, voice announcing in regional/ international languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil works like fixing of guide rail, counter weight etc.,The total product and services shall adhere to IS 14665/2016 ( with latest amendments) part/section 1 to 5 with regards to general guidelines of fire safety rated doors, MRLL beams, pressure switch, manual change over for doors during emergency, ARD of 10 times with sufficient battery back up and standard dimensions of chair car and door openings for all sizes and capacities of lifts including fitness certificate and duly observing all other safety norms prescribed and adhere to CPWD specifications, PCB Norms, National Electricity Code (NEC), NBC-2016, IEC and Karnataka State Lifts, Escalators and Passengers Conveyers Act 2012 and Rules 2014. The Supplier shall be registered in Government Electrical Inspectorate in the State of Karnataka.

2 13 Passengers Each 1 0

3 Supplying heavy gauge PVC conduit pipe ....... dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.

4 40 mm dia 2.5 mm thick m 50 0

5 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete.

7 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.

9 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. Each 3 0

10 Supplying, fixing and wiring 0 to 100 A Direct Reading AC analog type Ammeter Each 1 0

11 Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel/wood board. Each 1 0

12 Supplying, fixing and wiring rotary selector switch suitable for Ammeter Each 1 0

13 Supplying, fixing and wiring rotary selector switch suitable for Voltmeter Each 1 0

14 Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete

15 100 A 4 x 30 x 6 mm Aluminium Strips m 1 0

16 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.

17 100 A 25 kA Each 1 0

18 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.

19 6-32 A SP Each 3 0

20 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.

23 Compression type Aluminium Tubular in Line Connector for Aluminum Conductor

24 25 Sqmm No 12 0

25 GI Grounding pipe,B-Class,42 mm dia,2.5 Mts long,3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg No 1 0

26 Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each No 1 0

27 Good Quality Salt for grounding purposes packed in 50 Kg gunny bag bag 1 0

CCTV camera and strret light (Add for External Electrification)

1 Matrix 5MP(2560×1920 Pixel) or better Dome Camera MatrixR (SATATYA MIDR50FL40CWP P2) Nos 15 0

2 Sparsh 5MP(2560×1920 Pixel) or better Bullet Camera SparshR (SC-IND52BP-I(Z)(S)) Nos 5 0

3 Securus 32 Channels NVR with 4K (3840 × 2160) SecurusR (SS-N8032RV-H2-M5) Nos 1 0

4 Western Digital Windows Surveillance Hard Disk Western DigitalR (WD121PURP) Nos 1 0

5 Supplying and drawing UTP-CAT 6E LAN cable. m 250 0

6 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete.

7 1-2 Way Each 20 0

8 Supplying & Fixing of switch mounting rack with power manager & Cable manager.

9 4U with 450mm depth Each 1 0

10 Supplying fixing of Network Switches

11 48 port 10/100 Switch Each 1 0

12 Supplying & fixing of I/O socket with back box

13 Single I/O Each 20 0

14 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010

18 Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990

20 Supply and fixing of 3pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.

21 60 A Each 1 0

22 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.

23 6-32 A SP Each 8 0

24 6-32 A DP Each 1 0

25 6-32 A TPN Each 1 0

26 Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete

27 100 A 4 x 30 x 6 mm Aluminium Strips m 0.5 0

28 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.

30 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete.

32 Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers. Each 1 0

33 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT > 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency>1301m/w, nominal CRI >75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source.

34 LED Streetlight 120 W Each 6 0

35 Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/s for .......m Pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom ..... mm , top.... mm with 3 mm thick, suitable base plate and 4Nos of ..... long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended.

36 9 m - Top 70 mm and Bottom 155 mm dia Each 6 0

37 Single Arm Bracket with 2000 mm Standard 40/50 mm dia Each 6 0

38 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work cum 3.38 0

39 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates Cum 0.51 0

40 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retalning walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine ciivil sr aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, Cum 4.05 0

41 Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications. Tone 80195 0

42 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia No 3 0

43 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975

44 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) KM 0.18 0

45 25 Sqmm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm) KM 0.05 0

46 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff

48 Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata

49 All kinds of soils. Depth upto 1.50 m m³ 0.08 0

50 Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings mtr 218 0

for computer, Networking, UPS & Electronics

1 acer Intel Core i7-14700 All in One PC acerR(Veriton Z6714GT)Type of In-built Wireless Connectivity Wi-Fi 6 (802.11ax) + Bluetooth 5.0Number of Ports 1-HDMI,1-DP,1- RJ-45 (10/100/1000 Ethernet Port),Universal Audio Jack,2-USB 3.1 Gen 1 TYPE A,2-USB 3.1 Gen 2 TYPE A,1-USB 3.1 Gen 2 TYPE A,1-USB 3.2 Gen 2 TYPE C Processor Number Intel Core i7-14700 Nos 18 0

2 hp A4 Colour Laser Computer Printer hpR (HP Color LaserJet Pro 3203 Nos 2 0

3 CWC A4 and Legal Monochrome (Black) Laser Computer Printer Computer Printer with Minimum 1 Year On Site Warranty, including Cartridge and Power Cord/Adapto Auto Duplexing Printing (2-Sided Feature) Yes Nos 2 0

4 ARROW SIGN Projector Screen 120 Inches ARROW SIGNR (120" inch Self Lock Projector Screen) Type of mounting Wall Mount Nos 1 0

5 EPSON Standard Throw (0.91 to 2.5) Multimedia Projector (MMP) With 1920 x 1080 (Full HD) Resolution EPSONR (EPSON EH-TW6250) Nos 1 0

6 Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary

7 19/20mm dia 2mm thick Mtr 150 0

8 25 mm dia 2 mm thick Mtr 250 0

9 supplying heavy gauge PVC Conduit Pipe ….dia......mm thick with suitable size bends, metal junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run through out the conduit wherever necessary.

10 19/20mm dia 2mm thick Mtr 100 0

11 25mm dia 2mm thick Mtr 50 0

12 Supplying and drawing UTP-CAT 6E LAN cable. m 650 0

13 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete.

14 1-2 Way Each 30 0

15 Supplying & Fixing of switch mounting rack with power manager & Cable manager.

16 4U with 450mm depth Each 2 0

17 Supplying fixing of Network Switches

18 48 port 10/100 Switch Each 2 0

19 Supplying & fixing of I/O socket with back box

20 Single I/O Each 30 0

21 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010

25 Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete.

26 10 kVA ON LINE UPS Each 1 0

27 Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries.

28 100 AH capacity Each 20 0

Total Amount Grand Total Rs

1 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. By Mechanical Means using Motor Grader- In area of light jungle ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 7/2.6iiiA vol-3 Hectare 0.36 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B0%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

3 Compacting Original Ground- Loosening, leveling Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 15/3.7 vol-3 Cum 784.69 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B1%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

4 Earth work Mechanical Means Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 8/1.12 vol-1 Cum 24.15 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B2%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

6 Surface Drains in Soil Construction of unlined surface drains of average crosssectional area 0.40 m2 in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3m and lead of 50 m (average lead 25 m) as per Technical Specification Clause 307. Mechanical Means ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 132/20.8-b vo-3 Rmtr 2092.5 19.01 39778.42 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B3%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

9 Wet Mix Macadam (Plant mix method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 24/4.27 A vol-3 Cum 1918.12 2513.7 4821590.81 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B4%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

13 Semi Dense Bituminous Concrete Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 145/21-A vol-3 Cum 191.81 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B5%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

15 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35:2015.The finished surface to be level, uniform and free from streaks and holes. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 57/8.15 vol-3 Sqm 279 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B6%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

17 Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2012 made of Class B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 803.1, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2012. 60 cm equilateral triangle ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 54/8.5 iV vol-3 No 10 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B7%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

18 Direction and Place Identification Signs upto 0.9 m2 Size Board. Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67:2012 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area not exceeding 0.9 m2 fixed over back support frame of min 35 x 35 x 3mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 55/8.7 vol-3 Sqm 7.2 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B8%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

19 Road Studs Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 150/21-Cvol-3 No 154 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B9%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

20 Prime Coat over WMM/WBM Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg per m2 using mechanical means. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 29/5.1 1Ai vol-3 Sqm 7672.5 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B10%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

21 Tack coat on Bituminous surface Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 145/21Aiii vol-3 Sqm 7672.5 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B11%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

22 KSRRB M300-53. Construction of embankment with approved material Gravel/Murrum with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement Table 300-2 complete as per specifications, including cost of gravel / murrum, watering charges & compaction by vibratory roller to 95% of proctors density. MORTH Specification No. 305 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 1.8/7/vol-3 Cum 5053.2 2132955.72 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B12%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

23 Construction of Subgrade and Earthen Shoulders Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 3.6/15/vol-3 Cum 5161.5 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B13%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

24 Granular Sub-Base-By Mix in Place Method Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401-For Grading -V Material ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 4.2-v/19/vol-3 Cum 1953 2345.7 4581152.1 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B14%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

25 Kilometre Stone Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc Ordinary kilometer stone (precast) ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 8.16-ii/57/vol-3 Each 2 2566.2 5132.4 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B15%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

26 Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.4% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 5.8-C/31/vol-3 Cum 383.62 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B16%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

2 KSRRB M2900-1. Plain cement concrete M10 mix with crushed stone aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing including cost of materials, labour, HOM complete as per specifications. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 15/2.1.3 vol-1 Cum 6.63 40042.55 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B0%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

3 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 17/2.4.2 vol-1 Cum 85.11 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B1%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

4 Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 71/9.3 vol-3 M.T. 0.85 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B2%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

5 Providing and laying reinforced cement concrete pipe NP3 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing, including cost of materials, labour, HOM complete as per specifications.Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 I 2300 ....750mm. dia Page No. 254, I.No.34.6.4 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 135/20.1 63C Rmtr 20 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B3%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

6 Providing and laying reinforced cement concrete pipe NP3 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing, including cost of materials, labour, HOM complete as per specifications.Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 I 2300 ....1000mm. dia Page No. 254, I.No.34.6.4 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 135/20.1 63C Rmtr 40 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B4%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

7 Providing and laying reinforced cement concrete pipe NP3 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing, including cost of materials, labour, HOM complete as per specifications.Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 I 2300 ....1000mm. dia Page No. 254, I.No.34.6.4 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 135/20.1 63C Rmtr 10 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B5%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 7/1.8/vol-1 Rmtr 84.46 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B6%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

9 Earth work in surface excavation by mechanical means for lowering and levelling the ground for all works other then foundation in all kinds of soils and upto depth not exuceeding 300mm, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleteriours matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 8/1.14/vol-1 Cum 127.25 76.65 9753.71 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=6263&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B7%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

Grand Total of Detail Estimates 1163535.86

Item Code : As per Electrical SR 3689 No --- 55335

Item Name : P.S.C pole 9 mtr long 200 Kg WL -Material Cost

2 Item Code : As per Electrical SR 1166 No --- 17490

Item Name : P.S.C pole 9 mtr long 200 Kg WL -Labour Cost

3 Item Code : As per Electrical SR 3054 No --- 9162

Item Name : P.S.C pole 8.00 mtr long 145 Kg WL for stud -Material Cost

4 Item Code : As per Electrical SR 932 No --- 2796

Item Name : P.S.C pole 8.00 mtr long 145 Kg WL for stud -Labour Cost

5 Item Code : As per Electrical SR 162 No --- 648

Item Name : L.T.2 Pin cross arms, with pole clams, bolts, nuts and washers (for PCC poles) -Material Cost

6 Item Code : As per Electrical SR 106 No --- 424

Item Name : L.T.2 Pin cross arms, with pole clams, bolts, nuts and washers (for PCC poles) -Labour Cost

7 Item Code : As per Electrical SR 438 No --- 4380

Item Name : Horizontal cross arms with pole clams, HTST support, bolts, nuts and washers (for PSC poles) -Material Cost

8 Item Code : As per Electrical SR 106 No --- 1060

Item Name : Horizontal cross arms with pole clams, HTST support, bolts, nuts and washers (for PSC poles) -Labour Cost

9 Item Code : As per Electrical SR 17450 No --- 34900

Item Name : D.P Structure with 9 mtr RCC poles -Material Cost

10 Item Code : As per Electrical SR 3578 No --- 7156

Item Name : D.P Structure with 9 mtr RCC poles -Labour Cost

11 Item Code : As per Electrical SR 180 No --- 7200

Item Name : 11 KV pin insulators with GI pins -Material Cost

12 Item Code : As per Electrical SR 164 No --- 2952

Item Name : 45 KV Pin Insulators with GI Pins -Material Cost

13 Item Code : As per Electrical SR 4000 No --- 8000

Item Name : Guarding bitween HT and LT Lines Guarding materials -Material Cost

14 Item Code : As per Electrical SR 1165 No --- 2330

Item Name : Guarding bitween HT and LT Lines Guarding materials -Labour Cost

15 Item Code : As per Electrical SR 830 No --- 830

Item Name : Guy Sets -Material Cost

16 Item Code : As per Electrical SR 390 No --- 390

Item Name : Guy Sets -Labour Cost

17 Item Code : As per Electrical SR 36497 No --- 18248.5

Item Name : Rabbit ACSR Conductor -Material Cost

18 Item Code : As per Electrical SR 2869 No --- 1434.5

Item Name : Rabbit ACSR Conductor -Labour Cost

19 Item Code : As per Electrical SR 79 No --- 1422

Item Name : PG Clamps for rabbit conductor -Material Cost

20 Item Code : As per Electrical SR 165 No --- 2475

Item Name : Spiral earth electrode -Material Cost

21 Item Code : As per Electrical SR 61 No --- 915

Item Name : Spiral earth electrode -Labour Cost

22 Item Code : As per Electrical SR 191 No --- 2865

Item Name : EG Strirrups with GI Wire Lacing -Material Cost

23 Item Code : As per Electrical SR 109 No --- 1635

Item Name : EG Strirrups with GI Wire Lacing -Labour Cost

24 Item Code : As per Electrical SR 174 No --- 174

Item Name : Guy concerting with Boulders, mud andsand -Labour Cost

25 Item Code : As per Electrical SR 146 No --- 2190

Item Name : Caution/Danger board as per Drawing No Bescome/GM/CP/40/Dt 24.10.07 -Material Cost

26 Item Code : As per Electrical SR 53 No --- 795

Item Name : Caution/Danger board as per Drawing No Bescome/GM/CP/40/Dt 24.10.07 -Labour Cost

27 Item Code : As per Electrical SR 76 No --- 1064

Item Name : Antu-Climbing Device (12 mtr/1 kg GI Barbed wire) Lumsum -Material Cost

28 Item Code : As per Electrical SR 28 No --- 392

Item Name : Antu-Climbing Device (12 mtr/1 kg GI Barbed wire) Lumsum -Labour Cost

29 Item Code : As per Electrical SR 33292.35 No --- 33292.35

Item Name : Reaising above @90%

Information on litigation in which the Tenderer is involved:

Other Party/Parties Employer Details of Dispute Amount involved Remarks showing Present Status

BANKER’S CERTIFICATE

This is to certify that M/s. ………………………….. is a reputed company with a good financial standing. If the contract for this work, namely ……………………………… (Name of the work) is awarded to the above firm, we shall be able to provide overdraft/credit facilities to the extent of Rs. …………… to meet the working capital requirements for executing the above contract

Name of the Bank, Senior Bank Manger

Address:…………………………

List of Machinery

Note: Minimum 50% of the required machinery should be owned by the Tenderer. Remaining 50% of the required machinery may be owned / procurred on Lease basis / Hire basis.

Item of Equipment Requirement Owned/ Hired/Leased Owned/ Hired/Lease and available Remarks

No. Capacity Number/Capacity Age/ Condition

FORMAT FOR WORK DONE CERTIFICATE TO BE OBTAINED FROM COMPETENT AUTHORITY

has executed/ is executing(strike off which ever is not applicable) the work of .............................................

in this Organisation. The details of the work is as under:

1 Name of the Project :

2 Name of the Work :

3 Contract Amount :

4 Date of signing the Agreement :

5 Date of handing over of the Site :

6 Items executed :

Earth work excavation :

UCR/SSM/B.B.M :

P.C.C / R.C.C :

Alluminium & Steel work (Doors, Windows & Partition) :

Address for correspondence:

Information of the works for which Tenderer has submitted Tender.

Project Name Name & Address of the Employer Name of Work Amount put to Tender in Rs lac. Specified period of completion (including/excluding Monsoon Prescribed last date of submission of tender Probable date of decision on the Tender Remarks if any.

Information of the works for which Tender acceptance letters are received.

Project Name Name & Address of the Employer Name of Work Tendered Amount in Rs lac Specified period of completion (including/excluding Monsoon Probable Date of Handing over of site

Information on works which are yet to be completed.

Project Name Name & Address of the Employer Name of Work Contract Number Value of contract Rs. Lakhs Date of Markout /Date of Handing over of site Specified period of completion (including/ excluding Monsoon cost of balance works remaining Rs. in lac Probable date of completion

Year Name of work Name of Employer Quantity of work performed Remarks (Indicate contract reference)

2012-13 Exc & Embankment

Water Prrofing/Wall Panneling

2013-14 Exc & Embankment

Water Prrofing/Wall Panneling

2014-15 Exc & Embankment

Water Prrofing/Wall Panneling

2015-16 Exc & Embankment

Water Prrofing/Wall Panneling

2016-17 Exc & Embankment

Water Prrofing/Wall Panneling

Work executed as prime contractor (in the same name) on works of similar nature during the five years specified)

Project Name Name & Address of the Employer Name of Work Contract Number Value of contract Rs. Lakhs Date of Markout /Date of Handing over of site Specified period of completion (including/excluding Monsoon Actual date of completion Remarks (appreciation letter received for early completion or reasons, if there is delay in completion)

Financial Year Total value of works executed and payments received in the last five years (in Rs. lac)