NIT No. 03 (22-23) Item No. 12

Supply of Non-Clog end suction Horizontal centrifugal sewage pump suitable for sewage water having 15-16.5 mtr. Head, discharge 80-160 m3/hr. C.I. impeller, S.S. Shaft & sleeve, 1450 RPM suction/delivery size : 150mm X 125mm minimum efficiency of the pump shall be 75-90%, the pump coupled by tyre coupling with 20HP squirrel cage induction motor, 4 pole, 3 phase, TEFC IE2 415 Volts, AC supply,, 1450-1500 RPM, mounted on M.S. base frame and coupling guard. Make: Kirloskar/ M&P/ Beacon/lubi/jyoti/BS/Mody/DJB approved.

Supply of Non-Clog end suction Horizontal centrifugal sewage pump suitable for sewage water having 15-24 mtr. Head, discharge 60-100 m3/hr. C.I. impeller, S.S. Shaft & sleeve, 1450 RPM suction/delivery size : 125mm X 100mm minimum efficiency of the pump shall be 75-90%, the pump coupled by tyre coupling with 15HP squirrel cage induction motor, 3 phase, TEFC IE2 415 Volts, AC supply,, 1450-1500 RPM, mounted on M.S. base frame and coupling guard. Make: Kirloskar/ M&P/ Beacon/lubi/jyoti/BS/Mody/DJB approved.

Supply and installation of Vacuum Pump size 40x40 mm for charging of Pump coupled with 5 HP, AC,3 phase,1450 RPM, TEFC motor mounted on a common base. mounted on M.S. base frame and coupling guard. Make: -KBL /M&P/lubi/jyoti/BS/Mody/DJB Approved make.

Providing and laying in position reinforced cement concrete 1:2:4 (1Cement: 2 Coarse: 4 graded stone aggregate 20 mm nominal size) in foundation of pumps and Panel and also making arrangement for fixing of pump and panel

Supply of CIDF non rising spindle sluice valve, PN 1.0, IS: 14846 size 150 mm. (Payment will be made as per Actual). Make: - Kirloskar/IVC

Supply of CIDF non rising spindle sluice valve, PN 1.0, IS: 14846 size 125 mm. (Payment will be made as per Actual). Make: - Kirloskar/IVC

Supply of CIDF non rising spindle sluice valve, PN 1.0, IS: 14846 size 100 mm Make: - Kirloskar/IVC

Supply of CIDF swing type Non return valve as per IS 5312 (Part 1&2), PN 1.0, size 150 mm. Make: - Kirloskar/IVC

Supply of CIDF swing type Non return valve as per IS 5312 (Part 1&2), PN 1.0, size 125 mm. (Payment will be made as per Actual). Make: - Kirloskar/IVC

Supply of CIDF swing type Non return valve as per IS 5312 (Part 1&2), PN 1.0, size 100 mm. Make: - Kirloskar/IVC

Supply of CI foot valve, PN 2.0 as per IS 4038 flanged type size 125 mm. (Payment will be made as per Actual). Make: - Kirloskar/IVC

Supply of CI foot valve, PN 2.0 as per IS 4038 flanged type size 100 mm. (Payment will be made as per Actual). Make: - Kirloskar/IVC

Supply of MS pipe 150 mm dia, 'C' class as per IS: 1239. minimum 6.35mm thick M.S. Sheet. ISI Mark. (Payment will be made as per Actual).

Supply of MS pipe 125 mm dia, welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet. ISI Mark. (Payment will be made as per Actual).

Supply of MS pipe 100 mm dia, welded black steel pipe C (heavy) class as per IS: 1239, from minimum 6.35mm thick M.S. Sheet. (Payment will be made as per Actual).

Supply of MS plate of 8 mm thicks painting both sides with black anticorrosive bituminous paint of approved brand conforming to IS 3589/1981, IS 7322-1974, IS 784-1978 as directed by Engineer-in-Charge. (Actual weight will be paid). SOR (E&M) item code 26.1.29

Providing/fixing of water storage tank of capacity 500 Litre at Sonia Vihar BPS with pipe fittings and All 20mm nipple - 4 nos, tank nipple - 1 no, pipe -10 mtr, elbow-4nos, Tee- 2 nos, socket- 5 nos, Reducer socket ¾" to ½" - 2 nos. Union- 2nos and gun metal gate valves-2 nos, with the help of manual labour, tool & tackles. Make -water storage tank: -Sheetal/ Supreme/Aquapure/Any DJB approved. Make - pipe fittings: - ISI mark.

0.5 Hp Self Priming Water Pump Pipe size (mm x mm): 25 x 25, hp: 0.50, kw: 0.37, rpm (syn): 3000, head range (metres): 6-21, discharge range (lpm): 1950-450, Fitted with thermal overload protector, Brass impeller, Aluminium pressure die cast / aluminium extruded motor body

Supply of 150mm dia. MS long bend. ISI mark. (Payment will be made as per Actual).

Supply of 125mm dia. MS long bend. ISI mark. (Payment will be made as per Actual).

Supply of 100mm dia. MS long bend. ISI mark. (Payment will be made as per Actual).

Supply of MS flange of 150mm. ISI Mark. (Payment will be made as per Actual).

Supply of MS flange of 125mm. ISI Mark. (Payment will be made as per Actual).

Supply of MS flange of 100mm. ISI Mark. (Payment will be made as per Actual).

Supply of Nut- Bolt with washer of good quality size as per requirement. ISI Mark. (Payment will be made as per Actual).

Supply of rubber packing sheet with 50 % Neoprene (1.5 mm to 25 mm) (Payment will be made as per Actual). SOR (E&M) item code 22.6.1

Supply of capacity 3.0 Ton chain pulley block with 3 Mtr lift. Make Indef/Reva /Wester/DJB approved make

Supply Co2 Type Fire Extinguisher capacity 4.5 Kgs completes in all respect. Make: - Life Guard/Omex/ IS mark.

Supply of 50 mm dia. MS pipe medium class for Charging/Vacuum set and cable protection.

Supply of LT Power Copper cable, solid conductor, XLPE insulated, PVC sheathed, armoured, 650/1100 V grade as per IS 7098(Part 1) 1988 size 3.5 core 50 mm2 for connection new panel to old panel. (Payment will be made as per Actual) Make: - Havells/ Grandley/ Gloster/ finolex.

Supply of LT Power aluminum cable, solid conductor, XLPE insulated, PVC sheathed, armoured, 650/1100 V grade as per IS 7098 (Part 1) 1988 size 3.5 core 35 mm2 for external, internal lightening system and fans etc. Make: - Grandley/ Gloster/ Havells/ finolex.

Supply of LT Power aluminum cable, solid conductor, XLPE insulated, PVC sheathed, armoured, 650/1100 V grade as per IS 7098 (Part 1) 1988 size 3 core 16 mm2 for external, internal lightening system and fans etc. Make: - Grandley/ Gloster/ Havells/ finolex.

Supply of LT Power aluminum cable, solid conductor, XLPE insulated, PVC sheathed, armoured, 650/1100 V grade as per IS 7098 (Part 1) 1988 size 2 core 16 mm2 for external, internal lightening system and fans etc. Make: - Grandley/ Gloster/ Havells/ finolex.

Main switch 200Amp. Open execution type with Kit kat. Make: L&T/ Havells

On load change over switch 200Amp. Open execution type. Make: L&T/ Havells

36W LED fixture with LED lamp, basic all-purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver. SOR (E&M) item code 19.3.3 Make: - Havells, Philips,crompton

Supply of 45W L.E.D Light energy saving & environmental friendly long-life Versatile pressure die-cast aluminum IP 66 roadway laminate with high power L.E. D as light source. SOR (E&M) item code 19.10.5 Make: -Havells/ Bajaj/Crompton/ Phillips.

Supply of heavy-duty exhaust fan having size 450 mm (18'), 900 R.P.M. in grey colour of single phase 230 volts. SOR (E&M) item code 20.2.3 Make: - Almonard /Havells/ Bajaj.

Supply of ceiling fan of 1200mm sweep area of brown colour. SOR (E&M) item code 20.1.2 Make: - Orient/ Havells/ Any DJB approved make.

Supply and fixing of Air circulator size 600 mm (24 inch), 1440 R.P.M. in grey colour of single phase 230 volts. SOR (E&M) item code 20.3.2 Make: -Havells, Standard and any approved make by DJB.

Supply of pole mounted cable junction box of size (240X130X95) mm having IP 65 protection with complete accessories as per site requirement. Make: - Sintex/ Hensel.

Supply of Insulating mats for electricial purpose confirming to IS 1562/2000 of followingsig size (1mX2mX3mm). SOR (E&M) item code 22.5.3 Make: -Jyoti/National

Supplying and fixing 32 A rating, 240/415 V, 10 kA, "C" curve, single pole miniature circuit breaker. Make L&T/Siemens/ Havells

Supplying and fixing 32 A rating, 240/415 V, 10 kA, "C" curve, Double pole miniature circuit breaker. Make L&T/Siemens/ Havells

Supplying and fixing 63 A rating, 240/415 V, 10 kA, "C" curve, Tripal pole miniature circuit breaker. Make L&T/Siemens/ Havells

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required (D.S.R 18 E&M Code No1.8.3)Group C

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm (D.S.R 2018 E&M Code No -1.21.1)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire(D.S.R 2018 Code No -1.7.2)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire(D.S.R 2018 Code No -1.7.3)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. (D.S.R 2018 Code No -1.32)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator) 06-way, Double door (D.S.R 2018 E&M Code No -2.3.1)

I/T/C of ceiling fan, including wiring the down roads of standard length with 1.5 mm FR PVC insulated copper conductor, single core cable etc. as req. DSR-2018 E&M Code: -1.44

Installation of exhaust fan in the existing opening, including making goods the damage, connection, testing, commissioning etc. as required. DSR 2018 E&M, Code No.1.50.1

Supply and fixing if 32mm dia. 02 Mtr. long G.I pipe (medium class) bracket for mounting of fluorescent/ HPMV/HPSV street light fitting on pole/ wall including bending the pipe to the required shape, 2 Nos. 40mmX3mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. DSR-2018, Item code- 12.34

Installation, testing and commissioning of pre-wired, fluorescent fitting/compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC Insulated, copper conductor, single core cable and earthing etc. as required. DSR 2018 item code 1.41

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. DSR (E&M) 2018 Item No 5.4

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. DSR (E&M) 2018 Item No 5.10. (Payment will be made as per Actual)

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. DSR (E&M) 2018 Item No 5.15. (Payment will be made as per Actual)

Installation, erecting, testing, and commissioning of the above said equipment's/ accessories with all sundry equipment's, fittings, assemblies, accessories, hardware items, bolts, supports, termination lugs for electrical connections, cable glands, junction boxes, and other items for proper assembly and installation of the various equipment's and components of the work shall be deemed to have been included. The work also includes necessary required items for completion of work i.e. flanges, MS bends, MS Paddle Pipe, eccentric tapers, rubber gaskets, foundation bolts, construction of thrust block, necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement, loading, unloading, cartage, making good all damages caused during installation and restoring the same to their original finish as required, adequate safety provision, barricading, warning signal and other safety measures while executing the work or wherever necessary so as to avoid accident. The components of the installation shall be of such design so as to satisfactory function under all conditions.

Goodwill Enterprises

Gupta Brothers

Raj Engineering Co.