REPAIRS TO TAPASYA BUNGLOW, RAVI NAGAR, NAGPUR. (ONLY FOR SOCIETY).

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.

Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing And Laying Natural Stone finish pavers with nibs (for water harvesting) of Size 300x450mm of thickness 50mm that built-in during the manufacturing process. The Stone are made in 13 different surface textures and 28 colours which is by far the largest variety of paver finishes and aesthetics, special methods of manufacturing which does not include hydraulic compaction but vibratory compaction method is used with natural rubber moulds made to perfection. Pavers Should always reported a compressive strength of over 45MPa when tested at standard labs. The block should have abrasion resistant ECO-SHIELD SWAN WHITE coating on top etc.complete as per directed by the Architect and Engineer-in-Charge. (Excluding All Taxes) VIDE LETTER NO. SE/11270/2.12.2024

Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. One Number : As directed by Engineer-in-charge.

Providing and casting in situ or precast GARDEN EDGE ARCH Of Size 475x150x75mm P.C.C of M-30 Semi Barrier type Kerb without gutter (as per IRC 86 1983) embedded 100mm below ground level including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface. Using Concrete Batching and Mixing Plant with required paint etc.complete as per directed by the Architect and Engineer-in-Charge. (Excluding All VIDE LETTER NO. SE/11270/2.12.2024

Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

Providing and Fixing 18mm 0.5 density Decorative /Luxurious WPS Sheet on Wooden Bottom (Size 50mmx25mm)Fixed in Heavy glazed Saipro rectangular aluminium pipe of weight 295 per kg at spacing 600mmx600mm grid pattern etc. Completed as per directed by Engineer in -Charge. VIDE LETTER NO. SE/8845/20.09.2024