REPAIRS / MAINTENANCE AND REPLACEMENT OF SOLAR STREET LIGHTS, SOLAR WATER HEATER AND MISC WORKS OF DIESEL ENGINE UDER AGE E/M-I AT GE (CENTRAL) KHADKI.

Amount

Maintenance and servicing of DG set 250 KVA, Make: Greaves Ltd including replacment of defective/wornout spares with new spares such as fuel filter, lube oil filter, gaskets, V belts,rubber hoses with clamps, nuts bolts and cleaning of alternator with vaccum cleaner and replacement of Engine oil, tappet setting ,servicing of radiator etc for the smooth operation DG set all as specified and directed. NOTE :- 1) Replacement of spares such as fuel filters and oil filter including Nut,bolts,washers,clamps, screws and grease etc required for the service / Maintenance of the DG Sets deemed to be included in the above quoted rate. 2) Other spares required for above will be measured and paid separately under relevent items of Sch. Location: Yerwada pump house.

Description all as item No.1 above but 160 KVA make kirloskar cummins installed at YPH

Description all as item No.1 above but 100 to 125 KVA make kirloskar cummins installed at computer centre and indoor stadium at at BEG & Centre.

Description all as item No.1 above but 50 to 70 KVA make kirloskar installed at TB-II P/H, ADG office, Rashmi, Khadki and Sarvatra Vihar P/H

Description all as item No.1 above but 30 to 40 KVA make kirloskar installed at shooting gallery TB-II, RA Line P/H, Telephone exchange, CIMT TB-II, KKD Line P/H, Ajit Vihar P/H, Dunkirk Line P/H and Nirikshan Vihar.

Description all as item No.1 above but 15 to 25 KVA make kirloskar installed at Depot Bn sub stn,TB-I Pump House, Depot Bn Pump House, Baffle Range, Birajdar P/H, Dunkirk Line MAP-II P/H, Shylhet Mess TB-I and Engine House Road.

Supply and fix in repair of radiator assembly for 250 KVA DG Set, Make: Greaves Ltd Dimaension of radiator assemly as per 250 KVA DG set at Yarvada Pump House including all fitting complete all as specified and directed by Engr-in-Charge

Supply and fix in repair of Thermostat assembly for 250 KVA DG Set, Make: Greaves Ltd as per 250 KVA DG set at Yarvada Pump House including all fitting complete all as specified and directed by Engr-in-Charge

Supply and fix in repair of Water pump assembly for 250 KVA DG Set, Make: Greaves Ltd as per 250 KVA DG set at Yarvada Pump House including all fitting complete all as specified and directed by Engr-in-Charge

Supply only air filter inner and outer for 250 KVA DG set Greaves Ltd complete all as specified and directed by Engr-in-Charge.

Supply only air filter inner and outer for 160 KVA DG set complete all as specified and directed by Engr-in-Charge

Supply only air filter inner and outer for 100 to 125 KVA DG set kirloskar cummins.

Supply only air filter inner and outer for 50 to 70 KVA DG set MAKE :- Kirloskar.

Supply only Air filter inner and outer for 30 and 40 KVA DG set, MAKE :- Kirloskar

Supply only Air filter inner and outer for 15 to 25 KVA DG set MAKE :- Kirloskar or equivalent

Supply only Fan belt for 250 KVA DG set, MAKE :- JK/Dunlop

Supply only Fan belt for 160 KVA DG set, MAKE :- JK/Dunlop

Supply only Fan belt for 110 to 125 KVA DG set, MAKE :- JK/Dunlop

Supply only Fan belt for 50 to 70 KVA DG set, MAKE :- JK/Dunlop

Supply only Fan belt for 30 to 40 KVA DG set, MAKE :- JK/Dunlop

Supply only Fan belt for 15 to 25 KVA DG set, MAKE :- JK/Dunlop

Supply only Fuel actuator with O Ring for 250 KVA DG set, MAKE :- Greaves

Supply only Fuel actuator with O Ring for 100 to 160 KVA DG set, MAKE :- Kirloskar

Supply only Fuel actuator with O Ring for 50 to 70 KVA DG set, MAKE :- Kirloskar

Supply only Fuel actuator with O Ring for 30 to 40 KVA DG set, MAKE :- Kirloskar

Supply only Fuel actuator with O Ring for 15 to 25 KVA DG set, MAKE :- Kirloskar

Supply only ignition switch with Key for 100 to 250 KVA DG set, MAKE :- Kirloskar

Supply only ignition switch with Key for 15 to70 KVA DG set, MAKE :- Kirloskar

Supply only coolant temperature sensor with guage for 100 KVA to 250 KVA DG set.

Supply only coolant temperature sensor with guage for 15 KVA to 100 KVA DG set.

Supply only Lube oil pressure sensor (Oil safety control) for 100 to 250 KVA DG set.

Supply only Lube oil pressure sensor (Oil safety control) for 50 to 70 KVA DG set.

Supply only Lube oil pressure sensor (Oil safety control) for 30 to 40 KVA DG set.

Supply only Lube oil pressure sensor (Oil safety control ) for 15 to 25 KVA DG set.

Supply only hose set with clamps and screws suitable for DG set 250 KVA MAKE :- Greaves Ltd.

Supply only hose set with clamps and screws suitable for DG set 160 KVA MAKE :- Greaves Ltd.

Supply only hose set with clamps and screws suitable for DG set 100 KVA to 125 KVA MAKE :- Kirloskar.

Supply only hose set with clamps and screws suitable for DG set 50 to 70 KVA MAKE :- Kirloskar.

Supply only hose set with clamps and screws suitable for DG set 30 to 40 KVA MAKE :- Kirloskar.

Supply only hose set with clamps and screws suitable for DG set 15 to 25 KVA MAKE :- Kirloskar.

Supply and replacement of self starter 12 volt dc including testing and commissioning as all specified and directed. MAKE :- Lucas/Mico

Supply and replacement of self starter 24 volt dc including testing and commissioning as all specified and directed. MAKE :- Lucas/Mico

Supply and Replacement of battery box made out to shape with angle iron 40x40x 5 mm, size 40cm x40cm x 20cm (Internal ) to arrange existing batteries all as directed.

Supply and Replacement of heavy duty battery terminals Brass with copper lead Pvc insulated multi stranded 25 sq mm duly soldered for +ve and -ve,05 mtr to 1.2 mtr long for 12/ 24 volt batteries.

Supply and fixing heating proof asbestos rope 12 mm dia on engine exhaust pipe including dismantling of burn out asbestors rope and arresting all leakages by welding / tightening the exhaust line including aluminium cladding and making complete fire proof, flame proof all as specified and directed.

Preparation of old painted surface of the DG Set installed in acuastic enclosure including Base frame, radiator ,Fuel tank etc of the following capacities complete degreasing and spray painting the same with two coats of approved synthetic enamel paint including writing SM/MES nos,Desriptions,Location,Capacity etc on DG set size of letter shall be 5 CMx5CM of capacity 15 KVA to 70 KVA all as directed by Engr in Charge .

Preparation of old painted surface of the DG Set including Base frame, radiator, Fuel tank etc of the following capacities complete degreasing and spray painting the same with two coats of approved synthetic enamel paint including writing SM/MES nos,Description,Location,Capacity etc on DG set size of letter shall be 5CMx5CM of capacity 100 KVA to 250 KVA all as directed by Engr in Charge .

Supply and replacement of anti vibration pad as per existing size and make all as directed by Engr-in-charge.

Descaling,Cleaning and pressure testing of radiator assembly as required including Brazing etc complete to make leak proof of capacity 15 KVA to 70 KVA all as directed by the Engr-in-charge.

Descaling,Cleaning and pressure testing of radiator assembly as required including Brazing etc complete to make leak proof of capacity 100 KVA to 250 KVA all as directed by the Engr-in-charge.

Supply and fix solonoid switch 12 Volts all as specified and and directed

Supply and fix solonoid switch 24 Volts as specified and and directed

Supply and fix in replacement/ topping up of coolent for radiators as approved by the Engr-In-Charge. MAKE :- Bosch

Supply and fix oil pressure gauge for 100 KVA to 250 KVA all as specified and and directed

Supply and fix oil pressure gauge for 15 KVA to 70 KVA all as specified and and directed.

Supply and replacement of hour run meter with hour counter

Supply and filling / Topping up engine oil multi grade as per manufacturers Recommendations in engine all as specified and directed. (Make ELF Oil/ Castrol /HP) including draining out old and burned engine oil.

Overhauling of FIP (Fuel Injection Pump) at work shop including replacement of small spares required,complete setting and pressure testing at work shop to make the FIP and injectors functional for DG set 100 KVA to 250 KVA all as specified and directed.

Overhauling of FIP ( fuel injection pump ) at work shop including replacement of small spares required,complete setting and pressure testing at work shop to make the FIP and injectors functional for DG set 15 KVA to 70 KVA all as specified and directed.

Supply and replacement of locks and keys for aquastic enclosures as per samples.

Supply and replacement of control pannel complete suitable for 100 KVA to 250 KVA DG Set.

Supply and replacement of control pannel complete suitable for 15 KVA to 70 KVA DG Set.

Supply and replacement of AVR (automatic voltage regulator ) suitable for DG set 100 KVA to 250 KVA.

Supply and replacement of AVR (automatic voltage regulator ) suitable for DG set 50 KVA to 70 KVA.

Supply and replacement of AVR (automatic voltage regulator ) suitable for DG set 15 KVA to 40 KVA.

Material and labour for rewinding,varnishing & insulation & drying of AC alternator stator including transportation from site to wksp and back.

Material and labour for winding, Varnishing and insulation of rotor including trasportation from site to wksp and back.

Supply and fix DG set controller, Model No ACG 543 all as specified and and directed.

Supply and fix fuel hose for any capacity DG set 1 mtr to 2 mtr for fuel tank to DG set all as specified and and directed.

Material and labour for calibration of fuel feed pump for any capacity of DG set

Supply and fix 4 pole power contactor, 415Volts, 60 amps, incl dismentling taking down unsv one, Make-L&T, Type-ML-3, Cat No-SS90721 or equivelent model of ABB/Schneider

Supply and fix 4 pole power contactor, 415Volts, 100 to 160 amps, incl dismentling taking down unsv one, Make-L&T, Type-ML-3, Cat No-SS90721 or equivelent model of ABB/Schneider

Supply and fix SMPS 12 vots 10 amp for 15 to 70 KVA DG set

Supply and fix SMPS 24 volts 10 amp 100 to 250 KVA DG set

Supply and fix rectifier diode assembly 15 to 70 KVA DG set

Supply and fix rectifier diode assembly 100 to 250 KVA DG set

Repair of turbocharging with repair Kit 100 to 250 KVA DG set

Repair of turbocharging with repair Kit 15 to 70 KVA DG set

Supply and fix of Fuel injection pump assly make Stanadyne for DG set from 70 kVA to 250kVA

Supply and fix of fuel injector assly for DG set from 15 to 70 kVA

Supply and fix crank shaft assly for cummins make DG set from 70 kVA to 250kVA Model NTC 495 with bearings & Seal

Supply and fix cam shaft assly for cummins make DG set 15 to 70 kVA model NTC 495 with bushings & Seal

Supply and fix push rod for cummins Make DG set model NTC 495

Supply and fix cylinder head gasket set for cummins make DG set Model NTC 495

Removing old unserviceable battery charging unit from DG Set of 50 to 70 KVA of any make & Supply and fixing battery charging unit 12 volt of the same type with all necessary modifications including all fittings such as pully, belt , cables hardwares etc including fixing testing & commissioning complete all as specified & directed.

Material and labour for earthing complete with galvanised steel pipe electrode, 40 mm bore, medium grade, 3 mtr long buried directly and vertically in ground with top edge at ground level after making bore hole of size not less than 300 mm dia and 3.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified bldg), connected with galvanised steel earthing lead of 4mm dia all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2with RCC precast pit cover slab 400mmx400mmx80mm with handle for lifting made out of 8mm dia MS rod, funnel, wiremesh, 15 mm dia light grade GI tubing for protection of GI wire 4mm dia, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying of pipe and getting out in soft loose soil.

Description all as per item No. 87 above but in soft/disintegrated rock complete all as specified

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick.

Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

Material and labour for stone dust for cousioning of UG cable/ at cable trenches inside substation bulding etc. complete all as specified and directed.

Material and labour for brick protection with sub class 'B' brick for UG cable complete all as specified and as directed.

Material and labour for road cutting upto 300mm deep and 200mm wide for crossing GI water pipe line through road including making good the disturbed surface by filling mass concrete complete all as specified and as directed.

Material and labour for GI tubing light grade 40/50mm bore, ISI marked, for cable protection complete all as specified and directed.

PCC (1:3:6) type C-2 using 40mm graded aggregate as in foundation for filling in, mass concrete for foundation of DG set, Panel board, repairs to road cutting, drain, path etc complete all as specified and as directed.

PCC (1:2:4) type B-1 using 20mm graded aggregate a of reconstruction old damaged copings of DG set/ panel etc, including necessary form work complete all as specified and directed.

Dismantling taking out carefully old/unserviceable UG cable any type any size from trenches/poles/ducts/LT panels after dismentling ends from OH conductors/MCCBs/joint boxes for relaying/refixing or carrying to store for Sch of Credit.

Material and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board, 1100 volts grade heavy duty XLPE U/G cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed 16 sqmm 4 core with required aluminium cable lugs, complete all as specified and directed.

Description as per item No. 98 above but 25sqmm 3.5 core complete all as specified and directed.

Description as per item No. 98 above but 50sqmm 3.5 core complete all as specified and directed.

Description all as per item No. 98 above but 70sqmm 3.5 core complete all as specified and directed.

Description all as per item No. 98 here-in-before but 95sqmm 3.5 core complete all as specified and directed.

Supply and fix in replacement semi-intergated/all in one solar street light fitting 24 watt/ 24AH maintenance free Battery, including galavanized steel pole of suitable height with in built, Solar panel bracket, solar panel, luminary Arm and accessories, charge controller with dusk down sensor complete incl excavation of earth work complete all as specified and directed. MAKE :- Helonix cat part No-HLSSL06SI01060621-24W-WOP-CWL or CG/Ptronics

Maintenance and servicing of solar water heater tube/plate type with water tank of cap 100 LPD incl descaling and cleaning, checking any type of leakage in pipes,tank,panels etc also check for loose wire connection and repair the same complete all as specified and directed by Engr-in-Charge. NOTE :- cost of material incl quoted rate.

Description all as item No.104 above but 200 LPD

Description allas item No.104 above but 300 LPD

Supply and fixing in replacement of PVC Copper conductor three core 4 Sqmm multi stranded wire complete all as specified and directed. MAKE :- Havells/Plaza/Nicco

Supply and fix in repair of air valve and pressure valve of solar water heater

Supply and fix in repair of holding rubber of glass tube of ETC solar water heater. MAKE :- Photon/Tata

Supply and fix in repair of silicon coated glass tube set of ETC solar water heater. MAKE :- Photon/Tata

Supply and fix in repair of silcon coated plate of FPC solar water heater. MAKE :- Photon/Tata

Supply and fix in repair of ETC Solar Glass singleTube with holding rubber, for Hot Water. MAKE :- Photon/Tata

Supply and fix in repair of 100 ltr corrosion resistance insulated tank of Solar Water heater. MAKE :- Photon/Tata

Supply and fix in repair of 200 ltr corrosion resistance insulated tank of Solar Water heater . MAKE :- Photon/Tata

Supply and fix in repair of 300 ltr corrosion resistance stainless steel tank of Solar Water heater . MAKE :- Photon/Tata

Supply and fix in repair of heating element 2 KW to 3 KW for electricity back up

Supply and fix in repair of rubber pipe with clamp dia15 to 20 mm and length 0.5 mtr

Supply and fix in repair of HDPE pipe of dia 20mm along with all fitting for water supply connections complete all as specified and directed.

Supply and fix in repair of sheet metal enlosure with two pin and earth plug and soket complete with one double pole MCB complete all as specified and directed.

Supply and fix pipe in repair of KITEC (PEX-Al-PEX) 20mm dia along with all fitting for hot water supply connections complete all as specified and directed.

Material and labour for surface mounting Analog time switches, daily dial, , incl dismentling taking down unsv one, complete all as specified and directed.

Material and labour for 3 pole power contactor, 415Volts, 40 amps, incl dismentling taking down unsv one, complete all as specified and directed.

Supply and fix sheet steel enclosure of size 40cmx30cmx40cm made out of 3mm thick MS sheet hinged door and locking arrangements and painting (inside and outside) with epoxy powder coated including fixing in position with the following accessories internally pre wired and testing complete all as directed. (a) Time switch, GIC J648B1, 240V, AC, base mounting, L & T – 01 No. (b) 3 pole power contactors, type ML-3 of L&T or equivalent – 01 No. (c) Toggle switch, single pole 2 way - 01 No. (d) bakelite base brass terminal connector block 8 way 40 amps cap-1 No, (e) MCB TPN 40 amps of Legrand/L&T-1No and fixed to pole/wall with clamp, nuts, bolts washers and testing complete incl dismentling taking down unserviceable switch fuse complete all as specified and directed.

Material and labour 20 mm dia gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe (ISI marked) and fixed complete all as specified and directed for the following sizes:-

Description all as per item No 124 above but 25 mm dia

Description all as per item No 124 above but 40mm dia

Material and labour for 1100 volts grade heavy duty flat twin core cable PVC insulated with stranded aluminium conductor of size 10 sqmm and overall PVC sheathed in service connections from OH conductor to building incl dismentling taking down unserviceable one all as specified and directed.

Description all as per item No 127 above but size of cable 6 sqmm

Decription all as per item No 127 above but size of cable 4 sqmm

Description all as per item No 127 above but size of cable 2.5 sqmm

Supply and fix glow sign boards of size 12' x 3'x1' made out of acrylic sheet of 3 mm thick with letters as directed at various Pump House/Sub Station holding on 3.5 mtr height stainless steel pipe 32mm, height 3 Mtr, providing lighting/illumination with four tube light set and wiring upto connected point complete as per sample all as specified and as directed by Engr-in-Charge. NOTE :- Sample of glow sign board to be got approved by Engr-in-charge/GE before placing the order.

Material and labour for MCCB, 4 pole, 36 KA breaking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 400 amps, incl dismentling taking down unsv one, complete all as specified and directed. MAKE :- Legrand or equivalent.

Material and labour for MCCB, 4 pole, 36 KA breaking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 350 amps, incl dismentling taking down unsv one, make- Legrand or equivalent.

Material and labour for MCCB, 4 pole, 36 KA breaking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 200 amps, incl dismentling taking down unsv one, complete all as specified and directed.

Material and labour for MCCB, 4 pole, 36 KA breaking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 250 amps, incl dismentling taking down unsv one, complete all as specified and directed.

Material and labour for MCCB, 4 pole, 36 KA breaking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 160 amps, incl dismentling taking down unsv one, complete all as specified and directed.

Material and labour for MCCB, 4 pole, 16 KA breaking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 125 amps, incl dismentling taking down unsv one,

Material and labour for MCCB, 4 pole, 16 KA breaking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 100 amps, incl dismentling taking down unsv one, complete all as specified and directed.

Material and labour for MCCB, 4 pole, 16 KA breaking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 63 amps, incl dismentling taking down unsv one, complete all as specified and directed.

Supply and fix MCB TPN 25 to 63 Amps, 415 volt 10 KA complete with connection, testing and commissioning complete all as specified and directed by Engr-in-Charge. MAKE :- Legrand / Schneider/ABB

Supply and fix MCB, SPN (DP) 40-63 amps, 240 Volts, 10 KA ‘’C” curve complete with connection, testing and commissioning all as specified and directed by Engr-in-Charge. MAKE :- Legrand / Schneider/ABB

Supply and fix MCB, SPN (DP) 6 to 32 amps, 240 Volts, 10 KA ‘’C” curve all as specified and directed by Engr-in-Charge. MAKE :- Legrand / Schneider/ABB

Supply and fix MCB, Single Pole, 6 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve all as specified and directed by Engr-in-Charge MAKE :- Legrand / Schneider/ABB

Supply and fix rotational moulded polyethylene water storage tank of capacity 500 ltr (cylindrical vertical with close top) hoisted and fixed inposition all as specified in SSR Part-I with necessary platform along with fitting for cold water supply of solar water connections complete all as specified and directed.

Description all as per item no 144 above but 250 ltr

Supply and fix LED post top suspended lantern 60 watt made up of die cast aluminium housing, polycarbonate diffuser, power coated IP-65 complete with all fittings, incl three core copper flexible conductor cable incl dismentling taking down unsv fitting any type complete all as specified and directed by Engr-in-Charge. MAKE :- Jaguar Cat No: LGTP08X060XW or Equivalent in Philips/Surya.

Supply and fix LED post top lantern 45 watt complete with 40/50 mm GI Pipe Light grade,clamps,nut,bolt and washers, incl 1.5 sqmm three core copper flexible conductor cable incl dismentling taking down unsv fitting any type complete all as specified and directed by Engr-in-Charge. MAKE :- Wipro Cat no: LP07-501-XXX-57-CL or Equivalent in Philips/Crompton Greaves/Jaguar.

Supply and fix LED Bollard light with robust design and efficient light distribution of 10 watt ,230 Volt AC with all fittings complete on PCC foundation all as specified and directed by Engr-in-charge. MAKE :- CG Cat No LBLSN-10-CDL/WW or equivalent, Philips/Wipro/Jaguar.

Supply and fix bright light 8 inch Milky Doom, round shape outdoor type including taking down unserviceabble complete all as specified and directed by Engr-in-Charge.

Material and labour for three core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn through PVC Conduit incl dismentling taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. MAKE :- Polycab/Finolex/Havells

Material and labour for rigid non-mettalic PVC conduit of siz 20mm inclusive of all fittings i.e. tees,bends,elbows, bell mount tube ends and fixing accessories such as couplers, lock nuts,saddles, pipe hooks etc complete all as specified and directed by Engr-in-Charge

Supply and fix in repair of on load Change Over switch 63A, 4 pole with steel sheet enclosure complete all as specified and directed. MAKE :- Havells/L&T/C&S

Description all as per item No 152 above but 100A

Description all as per item No 152 above but 125A

Description all as per item No 152 above but 160A

Description all as per item No 152 above but 200A

M/S kirpan Enterprises

ONKAR ELECTRIC AND GENERAL STORE

ASHWAMEDH ENGINEERS