Construction of 20 bed RPF barrack at Amalner and Improvement to the courtyard, toilets, Kitchen, roof and flooring in staff quarters in the jurisdiction of SSE/W/Amalner between Ukaisongadh - Jalgaon section of Western Railway. (Composite Tender including Electrical work)

Item Breakup - A-All DSR 2023 items

of 88 mm, weighing not less than 190 gms. 17.74 Providing and fixing PTMT shelf 440 mm Each 5 713.2 3566 long, 124 mm width and 36 mm height of 9 approved quality and colour, weighing not less than 300 gms. Total 569637.15 Item- 14 CHAPTER 18 S No. Item No Description of Item Unit Qty Rate Amount 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 18.7 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ( Internal work - Exposed on wall ) 1 18.7.1 15 mm nominal dia Pipes Metre 900 286.8 258120 2 18.7.3 25 mm nominal dia Pipes Metre 600 401.55 240930 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of 18.8 pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 3 18.8.2 20 mm nominal dia Pipes Metre 30 537.6 16128 4 18.8.3 25 mm nominal dia Pipes Metre 200 627.25 125450 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded 18.9 fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 5 18.9.3 25 mm nominal dia Pipes Metre 1100 355.4 390940 6 18.9.6 50 mm nominal dia Pipes Metre 1700 794.25 1350225 18.15S BRASS FITTINGS Providing and fixing gun metal gate valve 18.17 with C.I. wheel of approved quality (screwed end) : 7 18.17.1 25 mm nominal bore Each 14 622.4 8713.6 8 18.17.4 50 mm nominal bore Each 12 1026.65 12319.8 Providing and fixing ball valve (brass) of 18.18 approved quality, High or low pressure, with plastic floats complete : 9 18.18.1 15 mm nominal bore Each 2 406.85 813.7 MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY 10 18.18.3 25 mm nominal bore Each 30 464.05 13921.5 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all floor Per Litre 37000 11 407000 levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable 11 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass bib cock of 18.49 approved quality conforming to IS:8931 : 12 18.49.1 15 mm nominal bore Each 20 506.8 10136 18.54S PTMT FITTINGS Providing and fixing PTMT bib cock of 18.54 approved quality and colour. 18.54.1 15 mm nominal bore, 86 mm long, Each 330 125.6 41448 13 weighing not less than 88 gms Providing and fixing PTMT stop cock of 18.55 approved quality and colour. 18.55.1 15 mm nominal bore, 86 mm long, Each 55 118.5 6517.5 14 weighing not less than 88 gms 18.55.3 Concealed stop cock, 15 mm nominal bore, Each 5 218.1 1090.5

gms Providing and fixing PTMT pillar cock of 18.56 approved quality and colour. 18.56.2 15 mm nominal bore, 125 mm long foam Each 150 224.1 33615 16 flow, weighing not less than 120 gms Providing and fixing PTMT grating of 18.58 approved quality and colour. 18.58.2 Rectangular type with openable circular lid 18.58.2.1 150 mm nominal size square 100 mm Each 72 196.95 14180.4 17 diameter of the inner hinged round grating 18.59S AIR VALVE & WATER METER (BULK TYPE) 18.64 Providing and fixing PTMT swivelling Each 5 121.4 607 18 shower, 15 mm nominal bore, weighing not less than 40 gms 18.65 Providing and fixing PTMT soap Dish Holder Each 5 111.45 557.25 having length of 138mm, breadth 102mm, 19 height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. Total 2932713.25 Item- 15 CHAPTER 19 S No. Item No Description of Item Unit Qty Rate Amount 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed 19.6 with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 1 19.6.1 100 mm dia. R.C.C. pipe Metre 120 507.05 60846 2 19.6.2 150 mm dia. R.C.C. pipe Metre 200 556.45 111290 Total 172136.00 Item- 16 CHAPTER 21 S No. Item No Description of Item Unit Qty Rate Amount 21.0 ALUMINIUM WORK 21.1S General MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required 21.1 EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent Kg 300 495.05 148515 or dyed to required shade according to IS: 1 1868, Minimum anodic coating of grade AC 15) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent Kg 300 598.6 179580 or dyed to required shade according to IS: 2 1868, Minimum anodic coating of grade AC 15) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene 21.3 gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 100 1176.8 117680 3 (weight not less than 10kg/sqm) 21.18 Providing and fixing 12 mm thick frameless Sqm 5 5325.9 26629.5 toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing 4 arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in- charge (Door handle, lock and stopper etc. to paid separately) Total 472404.50 Item- 17 CHAPTER 22 S No. Item No Description of Item Unit Qty Rate Amount 22.0 WATER PROOFING 22.1S General MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the 22.7 adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. "All above operations to be done in order and as directed and specified by the Engineer-in- Charge : 22.7.1 With average thickness of 120 mm and Sqm 3200 1684.6 5390720 1 minimum thickness at khurra as 65 mm. 22.22A Providing and applying fibre reinforced Sqm 300 563.1 168930 elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self- priming of elastomeric water proofing liquid (dilution with water in the ratio of 3:1) and 2 two coats of undiluted elastomeric water proofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in- Charge. Total 5559650.00 Item- 18 CHAPTER 23 S No. Item No Description of Item Unit Qty Rate Amount 23.0 RAIN WATER HARVESTING & TUBEWELLS 23.1S General MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY 23.9 Providing and fixing factory made precast Each 800 1399.95 1119960 RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross 1 sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge. Total 1119960.00 Item- 19 CHAPTER 26 S No. Item No Description of Item Unit Qty Rate Amount 26.0 NEW TECHNOLOGIES AND MATERIALS 26.73S PREFAB/PRECAST TECHNOLOGY 26.83 Applying stamping finish to the top surface Sqm 500 762.75 381375 of freshly laid plain/reinforced cement concrete of specified grade in porticos, sidewalks, driveways, pool decks and open yards as per direction of the Engineer-in- Charge. The process shall include the following:- The concrete shall be placed and screeded to the finished grade, and floated to a uniform surface by using standard finishing techniques. The approved color hardener @ 2.7 kg/sqm shall be applied evenly to the surface of the fresh concrete by the dry shake method by sprinkling in two or more shakes, floated after each shake and trowelled only after the final floating. The approved release agent @ 0.113 kg/sqm shall be applied evenly to the trowelled surface before stamping or the said release agent can be applied to the flexible polyurethane stamp moulds of approved design and in required sizes to achieve final stamped pattern. These stampings shall be placed on the surface of concrete in three to four pieces at a time and tapped gently with rammers of sufficient size & weight to leave proper 1 stamp marks and the process repeated for the remaining concrete surface till the whole surface to be stamped is completed within the time while concrete is in plastic stage of setting. After stamping, the curing shall be done as per manufactures specifications. After initial curing the imprinted joints shall be grouted using cement slurry mixed with color hardener as per the requirement. The surface shall be sealed by applying acrylic based sealer not less than 0.167 litre/sqm.on finished surface. The construction joints shall be provided by groove cutting of size 4 mm x 20 mm in panel size 3 m x 3 m or lesser as per the site conditions and filling the same with 10 mm baker rod and providing and laying (PU) Polyurethane based joint sealer of approved make as per manufacturer's specifications and finished by applying Polyurethane resin based top protective clear coat of minimum 80 micron applied with rollers on properly cured and dry clean surface. (Cost of concrete for flooring is not included in this item which shall be paid separately.) MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Total 381375.00

Item Breakup - B- USSOR- ITEMS 2021

JCB Backhoe Loaders 3DX Plus or similar Hour with minimum 1.10 cum bucket capacity

Hydra or similar tyre mounted Pick-n-Carry Hour crane of 12T capacity for misc. works of handling of material

Tractor with Trolley for local transportation Hour or other misc. works. Total 515074.00

Item Breakup - C-NS ITEMS

Providing, laying and fixing unplasticized RM polyvinyl chloride(UPVC) pipes for soil, and waste discharge system type 'B' (SWR system) of 'Prince' or similar make (as per IS 13592:1992), single socketed for underground drainage system, making joints air and water tight with 'T' Shaped etc. Rate are including rubber rings ,solvent cement all labour, material, lead, lift, transportation, taxes,& royalty etc .complete, Note- Excavation of earth will be paid under relevant item in DSR. a) 160 mm dia. Total 115445.00 Item- 2 Uncoursed hand-packed DRY RUBBLE FILLING S No. Item No Description of Item Unit Qty Rate Amount

Uncoursed hand-packed DRY RUBBLE cum FILLING (in work liken rubble filling behind abutments etc.) without any special dressing of stones. Total 42580.27

Item Breakup - D-All Electrical Items

Supply of material and providing light/fan Numbers 1867.00 point concealed wiring, with single core multi-strand copper wire, PVC insulated unsheathed, LSHF / ZHFR, of size 1.5 sq.mm. for phase, neutral & earth wire and modular switches, complete with all accessories, junction box, ceiling rose etc, as per specifications in Annexure I. Total 961505.00 Item- 2 Supply, fixing, testing & commissioning of call bell S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

Supply, fixing, testing & commissioning of Numbers 110.00 call bell, and supply of material and providing concealed wiring of call bell point, with single core multi-strand copper wire, PVC insulated unsheathed, LSHF / ZHFR, of size 1.5 sq.mm. for phase, neutral & earth wire, and modular switches, complete with all accessories, junction box, ceiling rose etc., as per specifications in Annexure II. Total 83930.00 Item- 3 Supply of material and providing main/ submain S No. Item No Description of Item Unit Qty Rate Amount

Supply of material and providing main/ Running 4784.00 submain concealed wiring, with single core Metre multi-strand copper wire, PVC insulated unsheathed, LSHF / ZHFR, of size 2.5 sq.mm. for phase, neutral & earth wire, as per specifications in Annexure III. Total 516672.00 Item- 4 Supply of material and providing main/ submain S No. Item No Description of Item Unit Qty Rate Amount

Supply of material and providing main/ Running 3791.00 submain concealed wiring, with single core Metre multi-strand copper wire, PVC insulated unsheathed, LSHF / ZHFR, of size 4.0 sq.mm. for phase, neutral & earth wire, as per specifications in Annexure III. Total 576232.00 Item- 5 Supply and fixing of modular concealed mounting S No. Item No Description of Item Unit Qty Rate Amount

Supply and fixing of modular concealed Numbers 120.00 mounting box of two module, with suitable modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure IV. Total 15120.00 Item- 6 Supply and fixing of modular concealed mounting S No. Item No Description of Item Unit Qty Rate Amount

Supply and fixing of modular concealed Numbers mounting box of four module, with suitable modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure IV. Total 5920.00 Item- 7 Supply and fixing of modular concealed mounting S No. Item No Description of Item Unit Qty Rate Amount

Supply and fixing of modular concealed Numbers 464.00 mounting box of six module, with suitable modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure IV. Total 78838.24 Item- 8 Supply and fixing of modular concealed mounting S No. Item No Description of Item Unit Qty Rate Amount

Supply and fixing of modular concealed Numbers 450.00 mounting box of eight module, with suitable modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure IV. Total 95400.00 Item- 9 Supply and fixing of modular concealed mounting S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

Supply and fixing of modular concealed Numbers 463.00 mounting box of twelve module, with suitable modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure IV. Total 112416.40 Item- 10 Supply and fixing of modular concealed mounting S No. Item No Description of Item Unit Qty Rate Amount

Supply and fixing of modular concealed Numbers 403.00 mounting box of sixteen module, with suitable modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure IV. Total 104735.67 Item- 11 Supply, fixing, testing & commissioning of modular S No. Item No Description of Item Unit Qty Rate Amount

Supply, fixing, testing & commissioning of Numbers 650.00 modular socket 3 pin of 10A capacity with 10A one way modular switch, as per specifications in Annexure V. Total 111351.50 Item- 12 Supply, fixing, testing & commissioning of modular S No. Item No Description of Item Unit Qty Rate Amount

Supply, fixing, testing & commissioning of Numbers 360.00 modular power socket 3 pin twin heavy duty of 10/20 A capacity with 20A one way modular switch having neon indicator, as per specifications in Annexure VI. Total 106200.00 Item- 13 Supply, fixing & commissioning of single phase 20A S No. Item No Description of Item Unit Qty Rate Amount

Supply, fixing & commissioning of single Numbers phase 20A, 230V, DP industrial type socket outlet, with phase, neutral & earth, metal enclosed plug top alongwith 20A DP MCB in SS enclosure, as per specifications in Annexure VII. Total 19488.00 Item- 14 Supply, fixing & commissioning of DP MCB 6-40A S No. Item No Description of Item Unit Qty Rate Amount

Supply, fixing & commissioning of DP MCB Numbers 6-40A, in enclosure made of non metallic polycarbonate thermoplastic material, IP 65 weatherproof, as per specifications in Annexure VIII. Total 3192.00 Item- 15 Supply, fixing, testing & commissioning of MCB DB S No. Item No Description of Item Unit Qty Rate Amount

Supply, fixing, testing & commissioning of Numbers 117.00 MCB DB single phase with RCBO, m.s. enclosure, I/C-DP RCBO of 32Amp - 1No, O/G: SP MCB of 6A-32A - 4Nos, as per specifications in Annexure IX. Total 377325.00 Item- 16 Supply, fixing, testing & commissioning of MCB DB S No. Item No Description of Item Unit Qty Rate Amount

Supply, fixing, testing & commissioning of Numbers MCB DB single phase with RCCB in m.s. enclosure, I/C-DP MCB of 40A - 1No. & DP RCCB of 40A - 1No., O/G: SP MCB of 6A-32A - 8Nos., as per specifications in Annexure X. Total 20172.00 Item- 17 Supply, fixing & commissioning of MCB DB three MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY S No. Item No Description of Item Unit Qty Rate Amount

Supply, fixing & commissioning of MCB DB Numbers three phase, I/C: MCB TPN 63A - 01 No & O/G: 1) MCB SP 10A- 04 Nos. 2) MCB SP 20A - 04 Nos. 3) MCB SP 32A - 04 Nos., enclosure made of non metallic polycarbonate thermoplastic material, IP 65 weatherproof, as per specifications in Annexure XI. Total 10660.00 Item- 18 Supply, fixing & commissioning of MCB DB three S No. Item No Description of Item Unit Qty Rate Amount

Supply, fixing & commissioning of MCB DB Numbers three phase, I/C: 4P MCB 63A - 02Nos., O/G: 4P MCB 32A- 05Nos., enclosure made of non metallic polycarbonate thermoplastic material, IP 65 weatherproof, as per specifications in Annexure XII. Total 16634.00 Item- 19 Supply, fixing, testing & commissioning of 100A 4P S No. Item No Description of Item Unit Qty Rate Amount

Supply, fixing, testing & commissioning of Numbers 100A 4P RCBO with 100mA sensitivity, in m.s. enclosure, as per specifications in Annexure XIII. Total 16620.00 Item- 20 Supply, fixing, testing & commissioning of Geyser S No. Item No Description of Item Unit Qty Rate Amount

Supply, fixing, testing & commissioning of Numbers Geyser, storage type of 10 ltrs capacity, as per specifications in Annexure XIV. Total 40704.00 Item- 21 Supply, fixing, testing & commissioning of electric S No. Item No Description of Item Unit Qty Rate Amount

"Supply, fixing, testing & commissioning of Numbers electric insect killer / fly catcher machine of size 18""-24"" approx. with 2 nos. ultra violet tube lights of 15-20W each, suitable to work on 230V AC supply & with HT current electrified grid system, complete with removable collection tray with protective tray lock, hanging chain etc. Insect killer machine shall be connected with the supply point using PVC insulated & sheathed, FRLS wires, 1100 volt grade confirming to IS: 694 of 2010 or latest / IEC / NEC / NFPA Standards and ISI marked, with proper workmanship." Total 7880.00 Item- 22 Supply of energy efficient BEE 5 star rated BLDC S No. Item No Description of Item Unit Qty Rate Amount

Supply of energy efficient BEE 5 star rated Numbers 140.00 BLDC ceiling fan 1200mm (48") sweep, with down rod, and standard accessories, fan & regulator shall be compatible to work with various makes & models, as per specifications in Annexure XV. (Minimum Warrantee - 2 years) Total 307440.00 Item- 23 Fixing & commissioning of ceiling fan on existing M.S. hook S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

"Fixing & commissioning of ceiling fan on Numbers 140.00 existing M.S. hook: 1. The fan shall be installed complete with accessories & safety device e.g down rod, blades, canopies, rubber insulator, split pin & nut bolt with spring washers. If required size and length of down rod is different than original OEM make, then down rod will be supplied by the Railway. 2. The fan shall be connected with the supply point (within 3 mtr distance) using PVC insulated & sheathed copper wire 03 core 1.5mm2 size, LSHF / ZHFR, conforming to IS 694/2010 or latest and ISI marked, in PVC pipe or as per site conditions, with proper workmanship. (The ceiling fans will be supplied by Railways, transportation to site will be done by the firm from Mumbai central)." Total 7260.40 Item- 24 Supply, fixing, testing & commissioning of 5 step fan S No. Item No Description of Item Unit Qty Rate Amount

"Supply, fixing, testing & commissioning of Numbers 140.00 5 step fan regulator electronic modular stepped type, compatible to work with various makes & models of BLDC ceiling fans: 1. Ceiling fan's electronic modular stepped type regulator shall be of minimum 100 watts capacity suitable to work on 230 volts single phase AC supply. 2. Regulator should be compatible to work with various makes & models of BLDC ceiling fans. 3. Stepped regulator shall be fixed on modular board & connected with ceiling fan's piano controlling switch, shall be suitable for flush mounting on switch board, necessary internal wiring is included in the scope of work." Total 41659.80 Item- 25 Supply, fixing, testing & commissioning of super S No. Item No Description of Item Unit Qty Rate Amount

Supply, fixing, testing & commissioning of Numbers super energy efficient BLDC motor industrial exhaust fan of size 300mm (12") sweep and standard accessories, as per specifications in Annexure XVI. (Minimum Warrantee - 2 years) Total 300132.00 Item- 26 Supply, fixing, testing & commissioning of indoor S No. Item No Description of Item Unit Qty Rate Amount

Supply, fixing, testing & commissioning of Numbers 260.00 indoor type LED luminaires 20W maximum, 4 ft long, System efficacy greater than or equal to 110 lm/W, Lumen Output greater than or equal to 2000 lumens, Colour consistency CRI greater than or equal to 80, Driver Surge protection greater than or equal to 2.5KV. Luminaire should have Class B serviceability (i.e., the driver can be replaced or maintained at site). Luminaires complete with all accessories and other specifications as per Annexure XVII. (Minimum Warrantee - 5 years) Total 54178.80 Item- 27 Supply, fixing, testing & commissioning of LED street S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

Supply, fixing, testing & commissioning of Numbers LED street light lumaires 30W maximum, whether proof having IP 65/66 protection, System efficacy greater than or equal to 120 lm/W, Lumen Output greater than or equal to 3600 lumens, Colour consistency CRI greater than or equal to 70. Driver Surge protection greater than or equal to 4KV, The luminaire should have a potted driver, mounted inside the luminaire. Luminaire should have Class B serviceability (i.e., the driver can be replaced or maintained at site). Luminaries complete with all accessories and other specifications as per Annexure XVII. (Minimum Warrantee - 5 years) Total 78589.80 Item- 28 Supply of XLPE insulated, PVC sheathed, armoured S No. Item No Description of Item Unit Qty Rate Amount

Supply of XLPE insulated, PVC sheathed, Metre armoured 1.1 KV grade, multi-stranded aluminum conductor cable of size 25 sq.mm.x 4 core, as per specifications in Annexure XVIII. Total 78500.00 Item- 29 Supply of XLPE insulated, PVC sheathed, armoured S No. Item No Description of Item Unit Qty Rate Amount

Supply of XLPE insulated, PVC sheathed, Metre armoured 1.1 KV grade, multi-stranded copper conductor cable of size 10 mm² x 4 core, as per specifications in Annexure XVIII. Total 55200.00 Item- 30 Excavation of the cable trench in normal soil under S No. Item No Description of Item Unit Qty Rate Amount

Excavation of the cable trench in normal Metre soil under rail/ road and refilling back the excavated earth, restoring /repairing of flooring after lying of cable, as per specifications in Annexure XIX. Total 3762.00 Item- 31 Supply and erection of RCC hume pipe half round of S No. Item No Description of Item Unit Qty Rate Amount

Supply and erection of RCC hume pipe half Numbers round of size 150mm (6") dia x 1 mtr long, as per specifications in Annexure XX. Total 7194.00 Item- 32 Supply of material & saddling to the cables with GI saddles S No. Item No Description of Item Unit Qty Rate Amount

"Supply of material & saddling to the cables Metre with GI saddles: 1. The cable shall be fixed on walls/structures with G.I. saddle thickness of 1.2mm and G.I. base and suitable for the size of cables, minimum two saddles per meter shall be used while saddling the cable. 2. Galvanized base shall be provided below the cable and the base shall be fixed firmly first with M.S. fasteners of required size / standard quality counter sunk headed self-threading G.I. screw. Same shall be used for saddles also." Total 4554.00 Item- 33 Supply of material, fabrication of clamps of size S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

"Supply of material, fabrication of clamps of Metre size minimum 25x3 mm & GI screw of size minimum 2 inch, and clamping of cables : 1.The cable shall be clamped on wall / structure of station building or any service building with G.I. clamps made out by G.I. flat of 25mm x 3mm size minimum and GI screw of size minimum 2 inch, at every one meter distance. 2.The clamp shall be suitably shaped as per site requirement. The clamp shall be fabricated after the site survey by the contractor, as per actual size/ load requirement. GI flat spacers shall be of minimum 3 mm thick. 3.All the cables shall be clamped individually. 4.The clamp shall be fixed with suitable galvanized nut bolts/ fasteners with washers / standard quality counter sunk headed self-threading G.I. screws. " Total 17325.00 Item- 34 Supply & fixing of G.I. pipe 'B' class 50mm dia for cable protection S No. Item No Description of Item Unit Qty Rate Amount

"Supply & fixing of G.I. pipe 'B' class 50mm Metre dia for cable protection: 1. G.I. pipe shall be of 50mm dia., B class good quality and conforming to IS 1239. 2. G.I. clamps for fixing the pipes shall be made from G.I. flats of 25mm x 6mm and shaped as per site requirement. 3. G.I. clamps shall be fixed with G.I. nut bolts of adequate size and of good quality. 4. It may be used underground for cable protection or parallel to the G.I. mast/Rail pole." Total 749.00 Item- 35 Supply, fixing & commissioning of cable looping S No. Item No Description of Item Unit Qty Rate Amount

Supply, fixing & commissioning of cable Numbers l o o p i n g junction box, weatherproof for single phase, made of glass fiber reinforced polyester GRP moulding composite material, of minimum size 200mm x 140mm x 95mm (inside dimensions) with Kitkat fuse, as per specifications in Annexure XXI. Total 4690.00 Item- 36 Supply of material & providing earthing with 'B' class S No. Item No Description of Item Unit Qty Rate Amount

Supply of material & providing earthing with Numbers 'B' class G I pipe 3M long x 50mm dia, 3.2mm thick ISI marked, with earthing chamber & top cover, as per specifications in Annexure XXII. Total 166600.00 Item- 37 Supply of material & installation of maintenance free S No. Item No Description of Item Unit Qty Rate Amount

Supply of material & installation of Numbers maintenance free earth electrode of length 3 meter, including earth enhancement material for earthing for each electrode & other accessories as per Drg. No. SDO/ RDSO/ E&B/001 and RDSO Spec No. RDSO/SPN/197 /2008, as per Annexure XXIII. Total 33537.00 Item- 38 Supply, fixing, testing & commissioning of G.I. strip S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

Supply, fixing, testing & commissioning of Metre G.I. strip 25mm x 6mm for earthing, including cutting, bending, welding, excavation etc., as per specifications in Annexure XXIV. Total 2862.00 Item- 39 Supply, installation, testing, and commissioning of S No. Item No Description of Item Unit Qty Rate Amount

Supply, commissioning of Mains on GI Bare Wire (WG-MA/GB), supplying and erecting mains with WP 2 x 2.5 sq.mm., 1100V grade aluminum PVC insulated and PVC sheathed wires on GI bearer wire No.8 SWG complete erected with required size of porcelain reel insulators and 16 SWG GI binding wire. Specifications in Annexure XXV. Total 73000.00 Item- 40 Supplying & Erecting GI pipe 'A' class 25 mm dia S No. Item No Description of Item Unit Qty Rate Amount

Supplying & Erecting GI pipe 'A' class 25 Metre mm dia. Erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE. Specifications in Annexure XXVI. Total 108500.00 Item- 41 Supply and fixing of flexible pipe to drain water. S No. Item No Description of Item Unit Qty Rate Amount

Supply and fixing of flexible pipe to drain Running water. The drain pan shall be connected to Metre rigid PVC pipe by braided PVC flexible pipe with appropriate adapters. Total 16000.00 Item- 42 Supply of 100mm dia. (V4) vertical type energy S No. Item No Description of Item Unit Qty Rate Amount

Supply of 100mm dia. (V4) vertical type Numbers energy efficient multistage submersible pump set of capapcity suitable to deliver water at the rate of 90 to 60 LPM to the head of 66 to 86 Mtr., motor power rating of 3 HP/2.2 KW, 415V, 3ph, 50 Hz, etc., having water filled cooling, B class insulation, IP 68 protection, complete with all accessories, as per specifications in Annexure XXVII. Total 26762.00 Item- 43 Supply and fixing of HDPE pipe, coupling threads S No. Item No Description of Item Unit Qty Rate Amount

Supply and fixing of HDPE pipe, coupling Metre threads, 40/50mm dia (10Kg/sq.cm); as per specifications in Annexure XXVIII. Total 12700.00 Item- 44 Erection, testing & commissioning of sub. Pump set S No. Item No Description of Item Unit Qty Rate Amount

Erection, testing & commissioning of sub. Numbers Pump set complete, with copper cable, control panel & column pipe/ HDPE pipe with accessories, as per Annexure XXIX. (Pumpset, control panel, column / GI pipe & cable shall be supplied by the Railway) Total 5511.00 Item- 45 Supply, fixing, testing & commissioning of digital dry S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

Supply, fixing, testing & commissioning of Numbers digital dry run DOL starter for submersible/ monoblock pumpsets of capacity upto 7.5HP, 3-phase, 440V AC, inbuilt Single Phase Protection, Water Level Guard, Dry Run Protection, Reverse Phase Protection, Overload, Under Voltage / Over Voltage Protection, inbuilt DOL starter etc in mountable sheet steel encloser IP 54 protection, with lock & key arrangement, complete with all accessories, as per Annexure XXX. Total 3520.00 Item- 46 Supply, installation, testing and commissioning of S No. Item No Description of Item Unit Qty Rate Amount

Supply, commissioning of submersible flat copper cable, PVC insulated & sheathed, 3 core x 4.0 sq.mm. size, as per specifications in Annexure XXXI. Total 65400.00