Providing and Fixing of Furniture Complete in all aspects for C-Pyte Campus, Kheri Distt. Sangrur

HOSTEL BED Providing and supplying a single bed of overall size 1915L X 900W X 650H. The bed is fabricated using MS hollow box square section of size 40x40mm having thickness of 1.2mm. The headboard is at a height of 350mm from the mattress panel level and legboard is at a height of 200mm from mattress panel level. Mattress panel is made of 1mm thick CRCA sheet with all four sides bended and welded on frame which is supported on pipes of size 25x25x1.2mm. A storage box of size 830x450x300mm having openable shutter made in 0.8mm CRCA sheet is provided below the bed. All the MS components are duily powder coated with thickness of 60 microns.

MATTRESS FOR BED 1890 mm x 875 mm Number of Layers: Three Layers Thickness of Top Layer (Tolerance :- ± 2 mm): 25 mm Thickness of Core Layer (Tolerance :- ± 2 mm): 50 mm Thickness of Bottom Layer (Tolerance :- ± 2 mm) 25 mm: Material of Top Layer: PU Foam Material of Core Layer: PU Foam Material of Bottom Layer: PU Foam

CLASSROOM DESK 3 SEATER (72X15X32)'' Material of desk top and seat 18mm thick prelaminated MDF with all edges must be sealed with 2 mm PVC edge banding tape trimmed on all edges & corners Top size - 1800w x 380d x 18mm seat size - 1800w x 300d x 18mm height of desk top in mm 810 mm Type of desking configuration integrated desk cum seatings without shelf / storage under desk Two-seater desk frame structure - made up 32mm x 32mm x 1.2 mm thick ms square pipe Horizontal support members - made up of 32mm x 32mm x 1.2 mm thick ms square pipe Additional specification full desk is made in knockdown condition for better quality product

OFFICE TABLE WITH 3 DRAWERS FOR OFFICERS SIZE (71x35x30)" Providing and placing an executive table with both side pedestal. Table: The table is made up of a combination of 18mm and 25mm thick prelaminated MDF. The top of the table is 1800±10mm long and 900±10mm wide made up of 25mm thick prelaminated MDF. The modesty and gable ends of the table is made up of 18mm thick prelaminated MDF. The whole table is assembled using minifix and dowels standing upto a height of 750±10mm .All the sharp edges of the table top and gable ends are lipped with 2mm thick edge banding tapes to provide the smooth finish to the edges. Pedestal: Both side hanging pedestals are provided. Both pedestals are made up of 18mm thick prelaminated MDF. The overall size of pedestals is 400(±10)x450(±10)x550(±10)mm. The pedestal on left side is provided with three openable drawers with good quality SS handles. The pedestal on right side is provided with one drawer and one shutter with good quality SS handles. The drawers move on high quality telescopic channels and shutter is provided with high quality hinges. All the visible edges of the pedestals are lipped with 2mm thick PVC edge banding and the remaining hidden edges are lipped with 0.8mm thick Note:- All the drawers & shutters should be provided lock and key mechanism.

OFFICE CHAIRS REVOLVING WITH ARMS FOR OFFICERS STANDERD SIZE Providing and supplying a high back chair with ergonomic design, comfortable and aesthetically appealing. Seat and Back: The seat and back are made up of hot pressed 12mm plywood and moulded PU foam upholstered with fabric. The backrest shall be made by keeping the natural curvature of the spine which helps to provide full back support. Arm Rest: The chair shall be supplied with polypropylene handles. Mechanism: For comfortable seating, the chair is supplied with push back mechanism having single point locking feature and tilt tension adjustment knob. The pneumatic height adjustment for healthy seating that user can adjust upto 100mm. Base & Castors: Dual castors nylon/ABS finish. The pedestal should be five legged nylon pedestal having pitch circle dia 650mm fitted with 5 nos. of twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon having self-lubricating property for friction free movement.

VISITOR CHAIR WITH ARMS Providing and supplying a visitor chair with ergonomic design, comfortable and aesthetically appealing. Seat and Back: The seat and back are made up of hot pressed 12mm plywood and 50mm thick polyurethane foam having density 40kg/m3 upholstered with fabric. The backrest is designed with contoured lumbar support which provides support to spine and leaves shoulder free for easy movement. Arm Rest: The chair shall be supplied with polypropylene handles. Stand: The chair stand is cantilever shape made up of MS round pipe of dia 25.4mm having thickness 2mm that provides great comfort. The stand is duly powder coated with epoxy powder coating having thickness 60 microns. PVC shoes are provided at the bottom of the stand to prevent any scratches on the floor.

OFFICE TABLE WITH 3 DRAWERS Providing and placing a teacher table. The table top is made of 25mm thick prelaminated MDF board having size 1200mm X 600mm. The edges of the table are edge banded using 2mm thick PVC edge banding tape. The table height is 750mm. The table frame and footrest is made using MS round pipe of dia 25 mm and wall thickness minimum 1.2 mm. A three drawer storage and shutter storage fabricated using MS sheet of thickness 0.8mm is attached with the study table. The overall size of the storage is 400W X 450D X 500H. All the MS components are duly powder coated having thickness 60 microns. Note:- All the drawers & shutters should be provided lock and key mechanism.

COMPUTER TABLE SIZE (30x19x28)" Supplying and placing in position following office furniture - computer table. The overall height is 750 mm(±10), width is 485 mm(±10) and length is 750 mm(±10). Table Top made from 18mm thick pre laminated MDF and placed over the white duly powder coated square pipe of size 50 x 25 and 1.2mm. All sharp edges of top and drawer front are lipped with edge banding tape 2mm and remaining with 0.8mm thick edge bands by hot process. Key board made up of 18mm thick pre laminated MDF and sliding on good quality 300mm telescopic slider. The table is furnished with modesty and under structure joined through square pipe providing support between two legs. The metal structure is equipped with 4 adjusters for perfect balance. All Wooden Panels Prime Quality Board With ISI Marked.

COMPUTER CHAIRS WITH ARMS STANDARD SIZE Providing and supplying a medium back chair with ergonomic design, comfortable and aesthetically appealing. Seat and Back: The seat is made up of hot pressed 12mm plywood and moulded polyurethane foam upholstered with fabric. PVC beading is applied around the seat. The backrest is made up of plastic inner and outer covered with moulded polyurethane foam and upholstered with fabric. Arm Rest: The chair shall be supplied with polypropylene fixed arms completely joint with seat. Mechanism: For comfortable seating, the chair is supplied with permanent contact mechanism having single point locking feature and tilt tension adjustment knob. The pneumatic height adjustment for healthy seating that user can adjust upto 100mm. Base & Castors: Dual castors nylon/ABS finish. The pedestal should be five legged nylon pedestal having pitch circle dia 650mm fitted with 5 nos. of twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon having self-lubricating property for friction free movement.The chair dimensions are as follows: Outer Width: 610mm,Seat Height from ground: 440mm,Seat Width: 475mm,Seat Depth: 550mm,Back height: 510mm,Back Width: 425mm,All dimensions have a tolerance of ±10mm.

OFFICE CHAIRS STEEL WITH ARMS STANDARD SIZE Providing and supplying a visitor chair with ergonomic design, comfortable and aesthetically appealing. Seat and Back: The seat and back are made up of hot pressed 12mm plywood and 50mm thick polyurethane foam having density 40kg/m3 upholstered with fabric. The backrest is designed with contoured lumbar support which provides support to spine and leaves shoulder free for easy movement. PVC beading is applied around the seat and the back. Arm Rest: The chair shall be supplied with polyurethane fixed arms completely joint with seat and back Stand: The chair stand is cantilever shape made up of MS round pipe of dia 25.4mm having thickness 2mm that provides great comfort. The stand is duly powder coated with epoxy powder coating having thickness 60 microns. PVC shoes are provided at the bottom of the stand to prevent any scratches on the floor. The chair dimensions are as follows: Overall Height: 820mm,Outer Width: 580mm,Overall Depth: 610mm,Seat Height from ground: 460mm,Seat Width: 480mm,Seat Depth: 460mm,Back height from seat: 400mm Back Width: 480mm,Back Size (From Back): 450mm, All dimensions have a tolerance of ±10mm.