Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹10.2 LAccepted-AOC MALERKOTLA DIST SANGRUR | 1 | Accepted-AOC AOC |
Tender Value
₹10.2 L
EMD Value
₹22,000
Closing Date
14 Sept 2021, 5:00 pmClosed
Executive Engineer
Water Supply and Sanitation Division Malerkotla
REPAIR OF MACHINERY NEW CONTROL PANEL PUMP CHAMBER OHSR and WATER WORKS NEW DISINFECTION UNIT AUTOMATED WATER CONTROLLER IMPROVEMENT IN EXISTING CONNECTIONS NEW WATER CONNECTIONS PandL PIPE LINE and SIGN BOARD PAINTING ETC
2021_WB_71227_1
120/WSSD/MALERKOTLA/EE/2021-22
Open Tender
Civil Works
Item Rate
90 days
Malerkotla
Please refer Tender documents.
4 documents required · 4 mandatory
₹1
₹22,000
30 Nov 2021
2 Sept 2021
15 Sept 2021
2 Sept 2021
14 Sept 2021
2 Sept 2021
Amount
Component -1
Submersible cable 10mm2
G.I. Column Pipe of suitable size 100mm i/d
Providing & Fixing Electric Panel Board (ISI marked) Consisting of electric appliances such as Automatic star Delta Push Button with oil immersed starter, Main switch, VM ampere Meter, E LCB, shunt capacitor, single phase Preconter, including lamps, Kit-kat etc. Complete in all respect.
Repair of Pump Chamber
White washing scraping inside of Pump Chamber.
Scraping of snowcem robbiacem etc.
White washing 2 coat inside of Pump Chamber.
Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. on old work one coat to give even shade.
Applying Pink Primer or-aluminium priming coat including preparation of surface With special quality paint.
Scraping of plastering of Pump Chamber.
Plastering 1:4, 12.5mm thick on Pump Chamber.
Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.
Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of Paris and chalk mitti including finishing the surface to the required finish complete. Inside pump Chamber.
Distempering with dry distemper of approved manufacture one coat on old distempered work.
Applying priming coat with methal primer on new steel or iron work incluing preparation of surface and Painting one coat with aluminum paint on old work to give an even shade.
Conglomerate floor 50mm thick cement concrete 1:2:4 on 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and 100mm fine sand filling using mechanical mixer for mixing of material.
Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.
Supply & fixing of pressed steel frames (chowkats) consisting of 18 gauge (1.25mm thick steel sheet of specified section standard design latest) including iron lugs (hold fasts) for iron hings conforming to PWD specification including bolts for fixing stops lock, netch bolts, hydraulic spring and finished with one priming coat of approved quality fixed in position including cost of cement concrete 1:3:6 for filling in the frame and cement concrete for 1:2:4 for lugs complete.
Doors and windows frame of size 118mm x 60mm with 40 mm wide single rebate weighing 3.43 kg per meter.
Providing and fixing of ceiling fan of reputed make such as Crompton or equivalent.
Providing and fixing of electric tube set of reputed make.
Repair of electric fitting complete in all respects.
Repair of OHSR
Repair of Expansion Joint Size 150 mm i/d complete in all respects.
Repair of bottom dome including scraping & plastering complete in all respects.
Painting of OHSR pipes including cost of labour & material complete in all respects.
Painting of OHSR stair case railing and pickets including cost of labour & material complete in all respects.
P/F OHSR Jali complete in all respects.
M.S Cover complete in all respects.
Repair of Water Works
Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects
Providing & fixing angle iron pickets with angle 40mm x40mm x 6mm including cost of concrete block & painting complete in all respects as per standard Drawing D-8.
Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing D-7 & Analysis A-7.
Construction of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per standard Drawing D-3 & Analysis A-5.
Construction of Cement Concrete, Foot Path with precast curve & earth filling inside water works as per standard Drawing D-10.
Structural steel work in angles, tees and flats, riveted or welded including cutting fixing all gusset plates with hoisting and erecting in position.
For roof truss, well curbs, plate girders etc. of any span for building for bridges upto 15M span.
Repair of gravel pit complete in all respects.
Painting one coat with aluminum paint on old work to give an even shade.
Finishing walls with cement based water soluble exterior paint such as snowecem, robbiacem etc. on old work one coat to give an even shade.for main gate piller & corner piller.
Painting of GPWSC by laws.
Providing, installing, testing & commissioning one no. Electrically actuated, diaphragm operated, Metering system, chemical dosing Chlorinator, suitable for delivering 0.5 to 0.6 litres of bleching powder solution/ sodium hypo solution per hour under maximum delivering pressure upto 7 kgcm^2 and suction lift not less than 1.5m as per DWSS standard Specification.
Repair and minor Replacement of existing pipe line
Provision for making new connection with exit pipe line as per analysis A-20 complete in all respects.
Hand boring Horizontally for crossing of pipe under road or any other obstacle by using Auger/Bocki method. Including excavation, stringing and jointing of pipe upto 160 mm complete.
Automated water controller switch to start or stop the pump based on water reservoir level complete in all respects.
Improvement in exisitng connections
Repair of old house connections complete in all respects.
Component -2
Providing proposed water connection on existing pipe line to house hold up to wall with providing, laying jointing, testing G.I pipe lines 15mm i/d=2.50 mtr (as per CSR 28.36 (a)) & MDPE pipe 15mm i/d = 2 mtr including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground, 15mm i/d G.I. Union & ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3'' i/d clamp with c.i. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approvel make as per CSR 30.65 (b) complete.
Component -3
Providing, Laying, fixing & jointing of PVC Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing including excavation & back filling complete as per specifications for more than 3 mtr street width included excavation.
PVC pipe 90mm o/d 6Kg/sqcm
PVC pipe 63mm o/d 6Kg/sqcm
Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in - charge) Class PN-1 as per ISI
150 mm I/d Sluice Valves flanged
100 mm I/d Sluice Valves flanged
Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department.
Size 0.9 m x 0.9 m.
Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting.
PVC pipe 63 mm o/d
Dismantling of cement concrete 80mm thick cement concrete 1:2:4 over 100mm thick C.C. 1:8:16 and making good the same to its original condition complete in all respects as per analysis A-25.
PVC pipe 63 mm o/d
Providing proposed water connection to house hold up to wall with providing, laying jointing, testing G.I pipe lines 15mm i/d=2.50 mtr (as per CSR 28.36 (a)) & MDPE pipe 15mm i/d = 2 mtr including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground, 15mm i/d G.I. union & ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3'' i/d clamp with c.i. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approvel make as per CSR 30.65 (b) complete.
Providing & fixing MS Sign Board as per standard size of DWSS as per analysis A-24.
Cost of Component-4 (Operation and maintenance) (For 3 months)
Provision for sodium chloride for disinfection of water Complete in all respect.
Credit of old control panel @10000/- Job & sluice valves 3 Nos. @1000/-each (10000 + 3000 = 13000)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .