CA NO GE(H)-77/2023-24 REPAIR / MAINTENANCE OF INTERNAL WIRING, REWINDING OF FANS, EXHAUST FANS AND OTHER ALLIED SERVICES IN OTM ACCN UNDER GE HISAR AT MIL STN HISAR

Amount

Dis-assembling carefully ceiling fans (any make) of 1200mm/ 1400mm sweep, cutting & removing old copper winding wire and rewinding the same with new super enameled copper wire of suitable size / gauge and weight not less than 325 gms including providing insulation by varnishing, oiling and greasing and reassembling including testing complete. Note :- (i) Cost of bearings, shafts, busheds if provided shall be measured in this item and nothing will be paid extra on this account. (ii) Working spaces will be provided to the contractor for carrying out necessary rewinding/repair with in AGE E/M store yard premises. (iii) If winded fan found unserviceable within six month of rewinding, contractor will repair the same without any extra cost. (iv) Cost of Machining work in body of ceiling fan by taking out worn out bush, boring hole to accommodate ball bearings is included in this item and nothing shall be paid extra on this account. (v) Cost of carrying ceiling fan/exhaust fan from site to the workshop and refixing of the same after repair is included in this item and all T&P and vehicle cost will be born by the contractor in this regard. (vi) Cost of taking down of fan shall be included in this items and nothing will be paid extra on this account.

Dis-assembling of exhaust fan of size 350mm/450mm/600mm AC 230 Volts, 50 Hz 900/1400 RPM for repair, removing existing burnt winding wire, bearing/bushes, tapes, flexible wire, shaft, check nuts, frame and rewinding with super enameled copper windings wire of suitable size and weight not less than 450gms and replacement of bushes, bearings, tubes, papers, shafts, check nuts, bolts and washers, capacitors, twin core wire of copper conductor flexible cable, greasing, varnishing and reassembling including testing complete. Note :- (i) Cost of bearings, bushes, shafts provided shall be measured and paid in this item and nothing extra shall be paid on this account. (ii) Working spaces will be provided to the contractor for carrying out necessary rewinding/repair within AGE E/M store yard premises. (iii) If winded exhaust fan found unserviceable within six month of rewinding, contractor will repair the same without any extra cost. (iv) Cost of Machining work in body of exhaust fan by taking out worn out bush, boring hole to accommodate ball bearings is included in this item and nothing shall be paid extra on this account. (v) Cost of carrying ceiling fan/exhaust fan from site to the workshop and refixing of the same after repair is included in this item and all T&P and vehicle cost will be born by the contractor in this regard. (vi) Cost of taking down of fan shall be included in this items and nothing will be paid extra on this account.

M&L for cutting holes in the wall for fixing exhaust fan of sweep 380mm and making good the distrubed surfaces all as per existing complete all as specified and directed.

Supply and fix capacitor 2.5 mfd to 3.15mfd dry type with PVC clamp of ceiling fan make of capacitor Epcos, / Usha, Supreme/ Havells .

All as per Ser item No 4.00 here-in-before but 4 mfd to 6mfd dry type with PVC clamp of exhaust fan make of capacitor Epcos, / Usha, Supreme/ Havells .

Preparation of old painted surfaces of the body, blades, down rod etc of ceiling fans of size 1200/1400mm sweep (any make) complete by rubbing with amery paper and filing in cavities with approved filler and applying one coat of spray painting with synthetic enamel paint (Glossy white/ pale cream) on the body, blades, down rods and writing MES /Fan no with black synthetic enamel paint complete all as specified & directed.

Preparation of old painted surfaces of the body, blades, and louvers of exhaust fans of size 380/450mm / 600mm sweep (any make) complete by rubbing with amery paper and filing in cavities with approved filler and applying one coat of spray painting with synthetic enamel paint (Black/ Brown) on the body, blades, down rods and writing MES /Exhaust no with black synthetic enamel paint complete all as specified & directed.

Supply and fix in repair of rubber bush complete with nut bolt, fork hook and spilt pin, washer suitable for existing ceiling fan 1200mm/1400mm sweep.

Supply and fix in replacement Ceiling fan stator 48 inch sweep 12 mm copper winding including thick steel bolt with double nuts and locking pins and high quality rubber bushing to reduce vibration complete all as specified and directed by Engg-in-charge.

Supply and fix in replacement rotor complete with copper winding suitable for 48 inch sweep ceiling fan all as specified and directed by Engg-in-charge

Supply & Fix ceiling fan mild steel body set (upper & lower) for ceiling fans of any sweep and make and fixing in position complete.

Supply only PVC canopy set (upper & lower) for ceiling fans of any sweep and make and fixing in position complete.

Supply only of aluminium blades of ceiling fan for 1200mm / 1400mm sweep & make complete.

Supply only MS heavy duty down rod of 15mm dia and 600mm length with necessary cutting / drilling holes and painting for ceiling fans complete all as specified and directed.

Supply only aluminium blades of exhaust fan 250/300mm/600mm sweep of any make complete.

Supply only frame including rubber bush and all accessories suitable for exhaust fan 250/300 / 600mm sweep of any make complete.

S&F in replacement Wall mounting Fan 400 mm sweep, 230 volts, fixed on wall with suitable size nut, bolts and washers complete all as specified and directed. Make: Crompton/Havells/Bajaj

Supply only shaft for ceiling fan of 1200/1400mm sweep and fixing in position for smooth functioning of ceiling fan complete all as specified and directed.

Supply only shaft for exhaust fan of any sweep and fixing in position for smooth functioning of exhaust fan complete all as specified and directed.

S&F in replacement PVC air fresh air Fan 300 mm sweep, 230 volts, with louvers and frame complete fixed on wall with suitable size nut, bolts and washers and connection complete all as specified & directed.

Supply & Fixing in replacement ceiling Fan 1200mm sweep 210 cfm Decoreted type with down rod , canopy, rubber reel etc including provision of three single core 0.5 sqmm copper conductor flexible cable connected from ceiling rose to fan and suitable size MS bolts, nuts for fixing ceiling fan complete all as specified and directed.

Supply only in replacement PVC flexible 2 core cable with copper con-ductor of size 23/0.76 mm from ceiling rose to fan including connection complete.-

S&F in replacement of louvers iron with shutters suitable for existing exhaust fan of any size and shape at site complete all as specified and directed by Engg-in-charge

S&F in replacement of rigid non metallic PVC conduit 20/25mm complete with clamps and nuts bore all as specified and directed.

Taking down carefully copper/aluminium point wiring (light/fan/socket or power) complete including taking out existing unserviceable terminal boxes & conduit with switches/sockets/fan regulators and fittings such as ceiling rose, pendants, tube light fittings, lamp holders, brackets light fittings, rectangular blocks, DB, MCB etc. and making good disturbed surface of walls, floors etc. to match with the existing surface etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 25.00 (here-in-before) but excluding existing concealed conduit.

M&L for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including concealed PVC rigid non metallic conduit 25mm dia medium grade (ISI marked) with all fittings such as tees, bends etc including modular sunk type pressed steel box with & including modular cover plate and frame for housing switches, sockets, regulator, etc’, complete, all as specified & directed. . (Note :- Switches, sockets etc shall be measured and paid for separately under appropriate items of BoQ' ).

All as per item No 27.00 (here-in-before) but ceiling fan /exhaust fan point controlled by one Number one way switch.

All as per item No. 27.00 (here-in-before) but for one 5 Amp socket outlet on independent board controlled by one Number one way switch on independent board.

All as per item No. 27.00 (here-in-before) but for one 5 Amp socket outlet on the same board controlled by one Number one way switch on same board.

All as per srl item No. 27.00 (here-in-before) but for 15 Amp socket out let by using 2.50 Sqmm PVC insulated unsheathed copper conductor cable FRLS multi stranded on independent board including provn of 2.50 Sqmm unsheathed, multistranded copper conductor cable FRLS continues as earth wire connected to earth dolly etc complete all as specified and directed by Engineer-in-Charge.

M & L for point wiring for one light controlled by one switch with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FRLS drawn through existing rigid PVC coduit and conduit accessories in existing concealed type in walls/ceilings and including change of steel terminal sunken boxes and 3 mm thick phenolic laminated sheet top cover for sunken boxes flush to surface for one light point/fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm copper conductor cable FRLS connected to common earth dolly complete complete all as specified and directed by Engineer-in-charge. (Note :- Switches, sockets etc shall be measured and paid for separately under appropriate items of BoQ' ).

All as per item No 32.00 (here-in-before) but ceiling fan /exhaust fan point controlled by one Number one way switch.

All as per item No. 32.00 (here-in-before) but for one 5 Amp socket outlet on independent board controlled by one Number one way switch on independent board.

All as per item No. 32.00 (here-in-before) but for one 5 Amp socket outlet on the same board controlled by one Number one way switch on same board.

All as per item No. 32.00 (here-in-before) but for 15 Amp socket out let by using 2.50 Sqmm PVC insulated unsheathed copper conductor cable FRLS multi stranded on independent board including provn of 2.50 Sqmm unsheathed, multi stranded copper conductor cable FRLS continues as earth wire connected to earth dolly etc complete all as specified and directed.

S&F in repairs modular type switch 1 way 6Amp, 230Volts 1 module complete all as specified and directed

S&F in repairs modular type switch 1 way 16Amp, 230Volts 1 module complete all as specified and directed

S&F in repairs modular type socket 6Amp - 2/3 pin combined 2 module 230 volts AC complete all as specified and directed

S&F in repairs modular type socket 6Amp/16 Amp - 2/3 pin combined 2 module 230 volts AC complete all as specified and directed

S&F modular type Ceiling fan regulator electronic step type of suitable wattage, 230V suitable for 1200/1400 mm ceiling fan etc complete all as specified and directed

S&F modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed.

Supply and fix modular lamp holder, insluated body, with modular straight back plate suitable for batten fittings & complete all as specified & directed

Supply and fix switch piano, flush type, single pole, one way, 5/6 Amp, 230 Volts all as specified & directed.Make: HPL/Havells/Legrand/Polycab/SSk/Honeywell/L&T

Supply and fix switch piano flush type, single pole, one way, 15 Amp, 230 Volts.Make: HPL/Havells/Legrand/Polycab/SSk/Honeywell/L&T

Supply and fix flush type socket outlet multipurpose 3 Pin 5/6 Amp (with 2 pin outlet also) 230 volts AC complete all as specified and directed.Make: HPL/Havells/Legrand/Polycab/SSk/Honeywell/L&T

Supply only flush type socket outlet multipurpose 3 Pin 15/16 Amp (with 3 pin 5/6 Amp outlet also) 230 volts AC complete all as specified and directed.Make: HPL/Havells/Legrand/Polycab/SSk/Honeywell/L&T

Supply and fix lamp holder, insluated body, with back plate suitable for batten fittings & complete all as specified & directed

Supply and fix ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed.

Supply and fix Ceiling fan regulator electronic four step type of suitable wattage, 230V suitable for 1200/1400 mm ceiling fan etc complete all as specified and directed. Make : Genric/Schneider/L&T/Legrand/Havells

S&F in repair Sub main wiring with two single core cable PVC insulated unsheathed of copper multi stranded conductor FRLS cable of size 4 sqmm, 1100 votls grade drawing through and including concealed conduit 25 mm dia medium duty including acessories such as Tee, bend, Elbow etc, ISI marked with and including PVC insulated 4 sqmm unsheathed multistranded FRLS copper conductor cable for earth continuity and connected to common earth dolly including cutting chasing of wall, if required and making good disturbed surface in CM (1:3) and finishig the surface to match with existing surface, etc complete all as specified and directed by Engineer-in-charge including taking down old unserviceable submain wiring. Note:- (i)Two lengths of 4 Sqmm cable, one length of 4 Sqmm cable and one length of PVC conduit will be measured as one length. (ii) Cost of taking down existing submain wiring including all accessories is included in this item and nothing will be paid extra on this account

All as per item No 51.00 (here-in-before) but cable of size 2.5.5sqmm drwan through existing surfaces/concealed conduit including taking out existing unserviceable sub main wiring .

All as per item No 51.00 (here-in-before) but cable of size 1.5sqmm drwan through existing surfaces/concealed conduit including taking out existing unserviceable sub main wiring .

Supply only in replacement single core cable with copper conductor 1.5 Sq mm PVC insulated, FRLS unsheathed multistranded 1100 volts grade laid in existing conduit omplete all as specified and directed..

Supply only in replacement single core cable with copper conductor 2.5 Sq mm PVC insulated, FRLS unsheathed multistranded 1100 volts grade laid in existing conduit complete all as specified and directed..

Supply only in replacement single core cable with copper conductor 4 Sq mm PVC insulated, FRLS unsheathed multistranded 1100 volts grade laid in existing conduit complete all as specified and directed.

Supply and fixing LED lights fitting 1x 40W, 220V,AC wall mounted LED batten with Aluminium housing & integrated electronic driver with efficacy of 100lumen/W connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

M/s Devendera construction

M/S SURJIT CONSTRUCTION COMPANY

P S TRADERS

NAVIN KUMAR

KUNAL ENTERPRISES