BID DOCUMENT FOR PROVIDING IMPROVEMENT ACCESS TO WATER THROUGH HOUSE HOLD CONNECTIONS IN EXISTING WATER SUPPLY SCHEME PHAPHRE BHAIKE, BLOCK BHIKHI, DISTT. MANSA

Item Wise Description :

Carriage of Earth, Surkhi, sand, Fly Ash, bajri, ballast, stone boulders, kankar and building rubbish, Earth. Carriage of material excluding initial lead of 5 Km (a) Phillaur Sand (Av. Lead 167 Km) 0 to 167 km CSR Item No. 5.2 (i)

Carriage of material excluding initial lead of 5 Km (b) Ghaghar Sand (Av. Lead 320 Km) 0 to 320 km CSR Item No. 5.2 (i)

Carriage of material excluding initial lead of 5 Km (c) Bajri Sand (Av. Lead 320 Km) 0 to 320 km CSR Item No. 5.2 (i)

Carriage of material excluding initial lead of 5 Km (d) Filter Media (Av. Lead 320 Km) 0 to 320 km CSR Item No. 5.2 (i)

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. CSR Item No. 6.6

Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m. CSR Item No. 6.19

Dismantling brick work tile masonary or tile lining in cement CSR Item No. 6.5 (b)

Scraping cement plaster CSR Item No. 8.31 (c)

Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering including attached pilasters buttresses etc. CSR Item No. 9.2

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. CSR Item No. 9.8

Cement concrete 1:8:16 (b) With stone aggregates 40mm gauge (ii) mixing by mechanical means using concrete mixer volumetric type CSR Item No. 10.6 (b) (ii)

Cement Concrete 1:2:4 (a) With stone ballast or shingle (ii) mixing by mechanical means using concrete mixer volumetric type CSR Item No. 10.13 (a) (ii)

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. CSR Item No. 10.20

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. CSR Item No. 10.21

Reinforcement cement concrete M-30 Mechanical batch mixed using batch type concrete mixer as per IS : 1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in super structure. CSR Item No. 10.22

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth CSR Item No. 11.5

Conglomerate floor 40mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material CSR Item No. 14.6

12.5 mm thick cement plaster 1:2 CSR Item No. 15.7

Cement rendering on plaster 1mm thick CSR Item No. 15.48

Bolts and nuts of all sizes and length required CSR Item No. 18.15

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete CSR Item No. 18.18

Excavation manually in trenches for pipe lines with straight or open cutting in streets and lanes in builtup area where width of street / Lane from wall to wall is less than 3 meter including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. Providing & fixing caution boards, watching, fencing, etc. and removal of surplus soil from the site upto 15 meter distance complete in all respects. (a) Earth work upto 1.5 m. Depth (i) All classes of soil except rocky CSR Item No. 28.1 (a) (i)

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect. (a) Earth work upto 1.5 m. Depth (i) All classes of soil except rocky CSR Item No. 28.2 (a) (i)

Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Pipe (S&S) as per IS 8329 and laying the same in trenches to correct alignment and gradients, jointed with rubber tyton joints fitted complete including all cartage, cost of rubber ring. (A) D.I Pipe as per IS 8329 DI-K7 (d) 200mm i/d CSR Item No. 28.7 (B) (A) (d)

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. and excavation of pipe line, minimum cover on pipe One meter (6kg/cm2 pressure). (xxiv) 200mm i/d CSR Item No. 28.13 (xxiv)

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. and excavation of pipe line, minimum cover on pipe One meter (6kg/cm2 pressure). (xii) 63 mm o/d CSR Item No. 28.13 b) + 28.18 + 28.2 (xii)

90 mm o/d (xiv) CSR Item No. 28.13 b) + 28.18 + 28.2 (xiv)

Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Double Flanged pipes with screwed flanged as per IS:83292000, Class-K9 and laying the same in trenches to correct alignment and gradients,jointed with nut bolts and rubber insertion joints fitted complete including all cartage. (a) 200 mm i/d pipe line laid complete. CSR Item No. 28.23 (a)

Supplying and laying D.I. specials/fittings as per IS:9523-2000 (ISI marked with the prior approval of Engineer-in-Charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys, etc. Complete in all respects. (a) Up to 300 mm i/d CSR Item No. 28.23 (a)

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). (A) Class PN-1 as per ISI (a) 80 mm i/d Sluice Valve CSR Item No. 28.27 (A) (a)

(d) 200mm i/d Sluice Valve CSR Item No. 28.27 (A) (d)

Providing & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra. (A) Class PN-1,0 as per ISI with rubber Flap (a) 200mm i/d Non-return valve CSR Item No. 28.31 (A) (e)

Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below (a) Top layer :----- Fine sand screened, cleaned and washed and graded (effective size 0.2 to 0.4mm with uniformity coefficient 2.00 to 3.00) from Pathankot or other approved source. CSR Item No. 28.51 (a)

Construction of Masonary Sluice Valve Chambar excluding Sluice Valve Cover as per standard design & drawings of Public Health Department. (b) 0.9 x 0.9 m. CSR Item No. 28.66 (b)

Providing & fixing 560 mm, 500 mm and 450 mm internal diametre circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS:12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines over manholes including cement concrete copping (M:20) around the frame etc. Dia of steel for lifting hook is 16mm. (for EHD and HD). (A) R.C.C. Manhole cover (a) 560mm i/d RCC man hole cover with frame as per IS (ii) Medium duty CSR Item No. 29.34 (A) (a) (ii)

Foot Rest for Manhole, Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 230x150x75cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone aggragate) complete as per design. CSR Item No. 29.35

NON SCHEDULE ITEMS Taking out and washing filter media and placing the same after washing, cleaning in filter beds (a) Top Layer :-- Fine sand screened, cleaned and washed and graded (effective size 0.2 to 0.4mm with uniformity coefficient 2.00 to 3.00) NS

NON SCHEDULE ITEMS Taking out and washing filter media and placing the same after washing, cleaning in filter beds (b) Second Layer :-- Coarse sand screened, cleaned and washed and graded from 3mm to 6mm NS

NON SCHEDULE ITEMS Taking out and washing filter media and placing the same after washing, cleaning in filter beds (c) Third Layer :-- Bajri screened, cleaned and washed and graded from 6mm to 20mm NS

NON SCHEDULE ITEMS Taking out and washing filter media and placing the same after washing, cleaning in filter beds (d) Fourth Layer :--- Bajri (Coarse) screened, cleaned and washed and graded from 20mm to 25mm NS

NON SCHEDULE ITEMS Taking out and washing filter media and placing the same after washing, cleaning in filter beds (f) Bottom Layer :-- Broken stone, screened, cleaned and washed and graded from 50mm to 75mm NS

NON SCHEDULE ITEMS Washing the false floor slabs with brushing & cleaning the cross drains etc. complete in all respects. NS

NON SCHEDULE ITEMS Providing, installing testing & commissioning of 3 No. electrically centrifugal driven pump set capable of delivering 960 LPM against a head of 6, 12 & 37 Mtr along with electric panel board consisting of electrical appliances Such as automatic Star Delta Push Button or oil immersed starter, Main Switch, Voltmeter .Ampere Meter, ELCB, Shunt Capacitor. Single Phase, preventer indicating Lamps , Kit Kat etc. including cost of Electronic over current relay complete in all respects. (i) (a) Raw water Motor for Sump BHP 3.00 ( Motor with Pump) Discharge 960 LPM. Head 6.00 Mtr NS

NON SCHEDULE ITEMS Providing, installing testing & commissioning of 3 No. electrically centrifugal driven pump set capable of delivering 960 LPM against a head of 6, 12 & 37 Mtr along with electric panel board consisting of electrical appliances Such as automatic Star Delta Push Button or oil immersed starter, Main Switch, Voltmeter .Ampere Meter, ELCB, Shunt Capacitor. Single Phase, preventer indicating Lamps , Kit Kat etc. including cost of Electronic over current relay complete in all respects. (i) (b) Raw water Motor BHP 7.50 ( Motor with Pump) Discharge 960 LPM. Head 12.00 Mtr NS

NON SCHEDULE ITEMS Providing, installing testing & commissioning of 3 No. electrically centrifugal driven pump set capable of delivering 960 LPM against a head of 6, 12 & 37 Mtr along with electric panel board consisting of electrical appliances Such as automatic Star Delta Push Button or oil immersed starter, Main Switch, Voltmeter .Ampere Meter, ELCB, Shunt Capacitor. Single Phase, preventer indicating Lamps , Kit Kat etc. including cost of Electronic over current relay complete in all respects. (i) (c) Clear water Motor BHP 25.00 ( Motor with Pump) Discharge 960 LPM. Head 37 Mtr NS

NON SCHEDULE ITEMS Providing, installing testing & commissioning of 3 No. electrically centrifugal driven pump set capable of delivering 960 LPM against a head of 6, 12 & 37 Mtr along with electric panel board consisting of electrical appliances Such as automatic Star Delta Push Button or oil immersed starter, Main Switch, Voltmeter .Ampere Meter, ELCB, Shunt Capacitor. Single Phase, preventer indicating Lamps , Kit Kat etc. including cost of Electronic over current relay complete in all respects. (ii) (a) Panel Board for Raw water motor for Sump NS

NON SCHEDULE ITEMS Providing, installing testing & commissioning of 3 No. electrically centrifugal driven pump set capable of delivering 960 LPM against a head of 6, 12 & 37 Mtr along with electric panel board consisting of electrical appliances Such as automatic Star Delta Push Button or oil immersed starter, Main Switch, Voltmeter .Ampere Meter, ELCB, Shunt Capacitor. Single Phase, preventer indicating Lamps , Kit Kat etc. including cost of Electronic over current relay complete in all respects. (ii) (b) Panel Board for Raw water motor NS

NON SCHEDULE ITEMS Providing, installing testing & commissioning of 3 No. electrically centrifugal driven pump set capable of delivering 960 LPM against a head of 6, 12 & 37 Mtr along with electric panel board consisting of electrical appliances Such as automatic Star Delta Push Button or oil immersed starter, Main Switch, Voltmeter .Ampere Meter, ELCB, Shunt Capacitor. Single Phase, preventer indicating Lamps , Kit Kat etc. including cost of Electronic over current relay complete in all respects. (ii) (c) Panel Board for Clear water motor NS

NON SCHEDULE ITEMS Providing, installing, testing & Commissioning one no. Electronically actuated, Diaphragm operated, Metering system, Chemical Dosing Chlorinator, suitable for delivering 0.5 to 6.0 Liters of Bleaching powder solution/ Sodium Hypo Solution per Hour under maximum delivery pressure up to 7 kg./ sqcm and suction lift not less than 1.5m as per DWSS standard specifications. NS

NON SCHEDULE ITEMS Provision for internal wiring for machinery with PVC insulated copper wire in PVC pipe NS

NON SCHEDULE ITEMS Providing house hold connection including laying, jointing, fixing testing below ground level MDPE pipe and above of ground level GI pipes (as approved by Engineer-In-Charge), including cost of excavation, Refilling, CI bib cock as per IS:210 with stainless steel spindle, 15mm i/d GI pipe 2.50 Mtr. & 15mm i/d MDPE pipe 2.00 Mtr. (length on average basis) 3" uPVC clamp, ISI marked G.M. Ferrule as per IS:2692 connection of 15mm i/d ferrule medium, specials such as tees, bends, sockets, elbow, nipples (100 mm & 150mm) Union Couplings, GI hooks etc., cutting, threading, making hole in wall and testing in trenches in the ground all material should be of approved make (to the approval of Engineer-in-charge) complete in all respect including cost of carriage. (Ref. CSR item Nos. 28.1, 28.36, 28.34 B, 30.65 b. (i) Water Connection on Old pipe line NS

NON SCHEDULE ITEMS Providing house hold connection including laying, jointing, fixing testing below ground level MDPE pipe and above of ground level GI pipes (as approved by Engineer-In-Charge), including cost of excavation, Refilling, CI bib cock as per IS:210 with stainless steel spindle, 15mm i/d GI pipe 2.50 Mtr. & 15mm i/d MDPE pipe 2.00 Mtr. (length on average basis) 3" uPVC clamp, ISI marked G.M. Ferrule as per IS:2692 connection of 15mm i/d ferrule medium, specials such as tees, bends, sockets, elbow, nipples (100 mm & 150mm) Union Couplings, GI hooks etc., cutting, threading, making hole in wall and testing in trenches in the ground all material should be of approved make (to the approval of Engineer-in-charge) complete in all respect including cost of carriage. (Ref. CSR item Nos. 28.1, 28.36, 28.34 B, 30.65 b. (i) Water Connection on New pipe line NS

NON SCHEDULE ITEMS Provision for connecting the proposed pipe with existing pipe line any size including cost of excavation, Bailing out water, D-joint etc. complete in all respect. NS

NON SCHEDULE ITEMS Painting of Sign Board NS

Credit of bricks for Dismantling of old inlet Channel (N.S. Rates) (-)

DHARAMPAL CONTRACTOR