Repairing and renovation conference room NIAS

Dismantling the existing electrical installations (2 Nos. old SPNDB, 21 Nos. old ceiling fans, 26 Nos. old tubelight fittings, few unused cable) in the room and checking thoroughly the existing lines before disconnecting and dismantling using 1 No. Semi-Skilled & 1 No. Unskilled person for 2 day using co's own tools & tackles.

S & F 2+10 way double door SPN MCB distribution board with IP-42/43 protection including 40A DP MCB isolator, 10 Nos. 6-32 A SPMCB concealed in wall after cutting the wall and mending good the damages to original finish incl.inter connection with suitable size of copper wire and netural link & provision for earthing attachment as required all MCB's are C-Curve and having 10 kA breaking capacity. (Make: Legrand)

S & F 240 V, 3 Nos. 6 A, 3 pin Modular type plug socket with 3 Nos. 6A Modular type switch & 1 No. 16 A, 3 pin Modular type plug socket with 1 No. 16A Modular type switch on 2 row 12 Module GI Modular type switch board with 2 row 12 Module top cover plate flushed in wall complete with 2 No. suitable size "Ph & N" copper bar incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Make: Legrand)

S & F 240 V 6 A Piano key type switch (Brand approved by EIC) (Make: Anchor) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

S & F Socket type fan regulator (Step type) (Brand approved by EIC) (Make: Anchor) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl. making necy. connections etc.

S & F of 240V, 9 Watt LED Bulb, colour temperature as per choice of EIC. (Make: Philips / Crompton / Havells)

S & F 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board.

(i) Philips TMC 502 2xT-LED 22W with 2 No. Mas LEDTube 1200mm 18W 865 T8 I – 2100lm / Eqv. Crompton, Wipro.

Fixing only single / twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.single / double polycarbonate body LED tubelight with fittings incl. necessary accessories.