Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.5 LAccepted-AOC SR NO 281 3 7 ANAND NAGAR NEAR DHANORI JAKAT NAKA LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L1 | Accepted-AOC THE LOWEST TENDERER | |
| 2 | L2₹13.1 L+₹53,978.50 (4.31%)Rejected-Finance | L2 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 3 | L3₹13.6 L+₹1.1 L (8.93%)Rejected-Finance | L3 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 4 | L4₹14.1 L+₹1.5 L (12.3%)Rejected-Finance NO 98 1 1C YOJANANAGAR LOHEGAON WAGOLI ROAD NEAR SIVBHA DARBAR HOTEL LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L4 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 5 | L5₹14.4 L+₹1.9 L (15.1%)Rejected-Finance | L5 | Rejected-Finance NOT THE LOWEST TENDERER |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
15 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE MH AND RH KHADKI
Military Engineer Services Garrison Engineer MH and Range Hills Range Hills Road Khadki, Pune 411003
WELCOME MAINT TO CERTAIN BLDGS AND MISC WORKS OF INSPECTION ORGN AT AUNDH UNDER GE MH AND RH KHADKI
2023_MES_604062_1
8431/E8
Open Tender
Civil Works
Item Rate
180 days
GE MH AND RH KHADKI
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MH AND RH KHADKI
₹50,000
5 Oct 2023
17 Jun 2023
17 Jul 2023
17 Jun 2023
15 Jul 2023
3 Jul 2023
17 Jun 2023 - 8 Jul 2023
Amount
S&F in repairs powder coated aluminuium pipe 20 mm dia as in curtain rod fixed to brakets all as specified and directed Note : Brackets shall be measured and paid separately under relevant item of this BOQ.
S & F in repairs powder coated aluminium brackets for curtain rods all as specified and directed.
S & F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples to wooden shuters.
S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples to wooden shutters.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
M&L Coloured Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tile laid over & including 15 mm thick screed bed in CM 1:4 complete all as specified.
M&L Coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with colour of tile laid over & including 10 mm thick rendering as in backing coat in CM 1:4 complete all as specified.
M&L coloured Non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tile laid over & including 15 mm thick screed bed in CM 1:4 all as specified.
As per item No. 8 but in skirting over & including 10 mm thick rendering as in backing coat in CM 1:4 complete all as specified.
S & F Vitrified ceramic coloured tiles 8 mm to 10mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match match with colour of tile laid over and including 15 mm thick screed bed or bedding in layer in cement mortar 1:4 complete all as specified.
As per item No. 10 but in skirting over & including 10 mm thick rendering as in backing coat in CM 1:4 complete all as specified.
S&F in repairs Wash basins, vitreous China (flat back or angle back type) size 580X450mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing and supply of waste pipe all as specified
S&F in repairs 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified.
S&F in repairs 15mm dia fancy type Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed
S&F in repairs 20mm dia fancy type Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed
S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed to bore pipe 15mm all as specified
S&F in repairs 15mm dia bore fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed
S&F in repairs CP two way bib taps screwed for iron pipe 15 mm bore and fixed necessary fitting with and incl PVC connection all as specified and directed
S&F in repairs PVC waste outlet pipe for 32/40mm dia WHB complete all as specified and directed.
S&F in repairs PVC waste outlet pipe for kitchen sink complete all as specified and directed.
S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete.
S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)
S&F in repairs Plastic water closet seat cover (any colour) closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device all as directed.
S & F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sqm complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 but no exc 4 sqm complete all as specified and directed.
Taking down shutters of any description exc. 1 and not exc. 2 sq. m each
S&F 105x60 mm Pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and directed by Engr-in-Charge.
S&F 125x60 mm Pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and directed by Engr-in-Charge.
S & F 30mm thick flush shutters,solid core construction with block boards core and plywood face panels, commercial type on both sides all as specified
S & F 35mm thick factory made IInd hard wood plain , framed , panelled shutter ( 2 panel ) with lock rail and panel commercial ply or 12 mm veneered particle board withof 9 mm B.W.P commercial veneering on both faces.The size of rail and stile as per IS:1003 ( part-I ), kiln seasoned and chemically pressure treated.
S&F of 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing
S&F factory made solid panel PVC door shutter 30mm thick (style) connecting of frame made out of MS tube for top and bottom rail. MS frame shall be coverd withheat moulded plain coour PVC 'C' channel having a PVC sheet strys of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for toprail and bottom rail panellinn of plain colour PVC to be fitted in the ms frame welded/ sealed in the stiles and rail with suitable PVC sheet and loading and jointed together with solvent cement, supplying and fixing in the frame at site all as disated by Engineer -in -charge.
S & F in repairs125 mm size extruded aluminium alloy handles, fabricated type anodised.
S & F 125 mm size extruded aluminium alloy handles, fabricated type anodised.
S & F in repairs 150mm aluminium anodised, barrel tower bolts of extruded section and fixed.
S & F 150 mm aluminium anodised, barrel tower bolts of extruded section and fixed.
S & F in repairs Aluminium alloy anodised Sliding Door Bolt with hasp and staple (Bolt Type) of size 200 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.
S & F Aluminium alloy anodised Sliding Door Bolt with hasp and staple (Bolt Type) of size 200 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.
M & L for cement concrete M-10 grade (nominal mix) using 12.50 mm graded stone aggregate for filling in pressed steel door frames etc.
Taking down cement or cement lime plaster from brick walls etc including racking out joints, hacking for key scrubbing down with water etc, all as specified and directed.
M & L for rendering 10mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finishing even & smooth without using extra cement all as specified and directed.
M&L rendering 10 mm thick in cement mortar 1:4 on fair faces of concrete surfaces of ceiling finishing even and smooth without using extra cement all as specified and directed.
S&F in repairs bathroom cabinet mirror (of approved pattern) of size 450mmx 350mm regular size with mirror and PVC shelves complete all as specified and directed by Engineer-in-Charge.
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed
S&F in repair plate rack made of stainless steel 1mm thick kitchen including fixing overall size 915mm x 915mm x 255 mm all as specified.
S&F in repairs Health faucet brass chromium plated with connecting decorative pipe including all accessories required for fixing of 15 mm bore of pipe all as directed.
Demolition stone slabs and tiles of any description or thickness in floors aprons laid and bedded and jointed in cement mortar.
M & L for 20mm thick Granite slab machine cut in laid over cement screed and jointed with grey cement slurry and pointed with whiteor colour cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including screed bed 15mm thick in CM 1:4 complete.
M&L for 20-25mm thk machine cut cuddappah stone as in slab flooring / table over cement screed bed laid and jointed with grey cment slurry mixed with pigment to match the shade of the slab incl grinding polishing laid over & including 15 mm thick screed bed in CM 1:4 complete all as specified.
Dismantling water tanks of capacity exc 250 litres but n exc 500 litres and removing to store all as specified
Dismantling water tanks of capacity exc 500 litres but n exc 1000 litres and removing to store all as specified
Supply and fix 500 liters capacity triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc complete.
Supply and fix 1000 liters capacity triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc complete.
M&L for cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfast and making good dismantled portion in cement mortar 1:3 or cement concrete M-15 grade (nominal mix) using 20mm graded stone aggregrate as required -depth of embedded portion of holdfast or lugsmeasured from the face of jamb into the wall - exc. half brick but n exc. one brick
S & F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded with a shop coat of red oxide primer complete all as specified and as directed.
Hacking out old broken glass, (any thickness, size , qulaity or description) metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new one all specified and directed
Supply only sheet glass, 3mm thick , ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane , all as specified and directed.
Supply only Figured glass, pinhead type 4mm thick glazing with oil putty in squares n exc 0.5 sq. m each pane all as specified and directed
S&F in repairs 100 mm mild steel butt hinges medium weight, cold rolled mild steel and fixed all as spesified
S&F 100 mm mild steel butt hinges medium weight, cold rolled mild steel and fixed all as spesified
Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store.
Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store.
Supplying & fixing to walls and ceiling 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.
Re-fixing 15mm bore old steel water tubing and connections in new or old position of walls, ceiling, floors etc with new fittings complete. Note: Serviceable pipes obtained shall be re-used
Supplying & fixing to walls and ceiling 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.
Re-fixing 20mm bore old steel water tubing and connections in new or old position of walls, ceiling, floors etc with new fittings complete. Note: Serviceable pipes obtained shall be re-used
S&F in repair tubular towel rail 20mm dia, D type 60cm long between flanges brass chromium plated, all as specified and directed.
S&F in repairs Chromium plated shower roses with or without swivel joints, 125mm including fixing to steel pipe or union
M&L for grinding and polishing of marble / kota stone / stone floor with machine complete all as specified & directed.
M&L for preparation of old steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engr-in-Charge.
M&L for preparation of old wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engr-in-Charge.
M&L for preparation of old plastered surfaces of wall & applying one coat of oil bound distemper complete all as specified & directed.
M&L for complete removal of existing treatment of old surfaces and applying two coat of oil bound distemper over a coat of primer over a coat of wall care putty not less than 1mm thick complete all as specified and directed.
M&L preperation of old ceiling surfaces and applying one coats of white wash on ceiling all as specified and directed by Engineer-in-Charge
M&L painting to wooden surfaces of any description over 10 cm width or girth including prepration of new or untreated surface and applying two coat of synthetic enamel paint over one coat of pink primer all as specified.
M&L for preparation of newly primed steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint all as specified and directed by Engr-in-Charge.
M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.
M & L applying three coats of white wash to newly plastered surface of ceiling including preparation.
M/S K.D.MATE
Suraj Sukhdev More
S.R.M.K Enterprises
ARK ENTERPRISES
J D Contruction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .