1030/HID/AGM-III/NIT-79

Amount

Supply and installation of Letherette + Metal Visitor 4 legged Chair: The Seat and Back-are made up of injection moulded high impact strength PolyPropylene polymer compound and HD foam of 32 D covered with letherette with indoor grade UV resistance SIZE : 45 cm. (W) x 45 cm. (D) BACK SIZE : 50 cm. Crome coated understructure welded tubular frame is made from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm M.S. E.R.W tube. The tubes are buff polished to give shiny finish. :The powder coated ( DFT 50±10 microns ) welded Beam M.S. Structure is made from 5.08 ± 0.03 cm x 5.08 ± 0.03 cm x 0.16 x 0.0128 cm. The 0.315 ± 0.008 cm thk M steel plate is welded to beam for fixing seat and back frame. The shoes are made of high impact strength PolyPropylene polymer compound with indoor grade UV resistance and pressed fitted with tubular frame. UPHOLSTRY- An upholstery cover can be retro fitted on to seat and back. The seat and back cover is made from High abrasion resistance letherette with foam lamination and 2.5 cm PU Foam insert all stitched as per design and direction of Engineer in charge.

Supply, Installation and placement of Double mattress with zipped cover Mat 78 60 4 from manufacturers cirtified with ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (all ISO must be from NABCB accredited agency), BIFMA (membership), AIOTA, Green guard (by UL) , indoor air quality certified manufacturer. Thickness: both side usable 12.5 cm A value for money mattress with maximum benefits packed into it. Its coir base with PU Foam quilt on top givesa cushioning effect to complement the supportive bottom layer as per direction of Engineer In Charge

Supply, Installation and placement of Single Mattress 78 36 4 from manufacturers cirtified with ISO 9001:2015, ISO 50001 :2018, ISO 45001 :2018, ISO 14001:2015 (all ISO must be from NABCB accredited agency), BIFMA (membership), AIOTA, Green guard (by UL) , indoor air quality certified manufacturer. Thickness: both side usable 12.5 cm A value for money mattress with maximum benefits packed into it. Its coir base with PU Foam quilt on top givesa cushioning effect to complement the supportive bottom layer. as per direction of Engineer In Charge

Supply and installation of Customise mirror panel hanging type with 5mm Mirror on (450X700mm) 18mm PLB panel fitted with required hardware. The side panel structure of this system comprises of 18mm PLB panels assemblies. Pre laminated (with PVC edge band) particle board interior grade (As per IS: 12823). Bottom shall have a backing laminate of minimum 0.6mm thickness. All the edges of work surface shall be provided with machine pressed 2 mm thick PVC Edge band glued with hotmelt EVA glue. hardware will be use from Hettich make Only. The drawer unit will be supported by designer curve type SS bracket unit and top corner of drawer front will be curved/shamphered as per direction of Engineer in charge

Luggage Rack Supply and Installation of wooden luggage rack:TOP: 18mm BWR ply board ISI Standard laminate, LEGS as panel of 18mm BWR ply board ISI Standard laminate, all exposed edges finished with PVC lipping, top also will have 8x4x415mm copper finish ss strips side by side with a gap of 75-100mm per direction of Engineer in charge

Supply, installation and placement of MAC Curtain Track ivory with Asian Paint Richmond Curtain fabric with manual operation with 100% polyester martindale 20000 end use width 1390 cm, for French window at more than 9ft. high with Brackets and necessary fittings: Curtain made with Sophisticated high quality pleated stich of Skipper with & imported quality tape with four side stitching, without linning , min six inch at bottom, one inch at two sides and three pleated style stitching with stiff good quality buckram of min. four inch which will be covered with above fabric at upper portion of the curtain, The Skipper curtain tape will be stitched at the back side at desired/required position and high quality of PVC 'S' clip along with designer belt etc. The curtain will be hanging from 28 mm dia , 1.6 mm thick corrugated Aluminium with special finished powder coated coloured section , modular machine finished ethnic look PVC finials. Curtain stitch make Skipper furnishing or equivalant as per direction of Engineer in charge.

Supply and installation of acoustic Roller Mac /D-Decor or equivalant black out blinds. The Control unit is made of high strength reinforced plastic.The clutch is of wrap spring design. High carbon steel springs are provided to transmit motion from driving to driven members of clutch mechanism. Clutch is operated directionally by the use of endless beaded chain. Idler:Idler is of high strength reinforced plastic, consisting of a centre shaft. The idler is mounted on the bracket by using a plastic lock. The metals leeve inside the plastic lock provides bearing surface for the centre shaft, which rotates freely, providing smooth, quiet and long wearing operation. Head rail: It is an aluminium extrudedrail Powder coated in white. Control unit and Idler are mounted on the Head rail with powder coated M.S. brackets. Roller tube: It is an anodized extruded tube of high strength alloy. Control unit and Idler are fixed to the either ends of the tube. The fabric of the blind is fitted to the tube with heavy duty adhesive tape. Bottom rail: It is an aluminium extruded rail with a groove for fixing the fabric and powder coated in white. It is fixed to the bottom of the fabric and the purpose of it is keep the fabric in tension and straight. The fabric is fitted to the tube using plastic insert. The end caps of the tube are ABS. Operating chain: This is made of 4.5 mm plastic beads moulded on 2.2 mm thick polyester chord. The pitch of the beads is 6mm. The chain drives the sprockets of the control unit to close and open the blind. The pitch of the chain corresponds to the sprocket in perfect match for trouble free operation. Fixing brackets & clamps: These are used to fix the blind to the wall o rceiling .'L' bracket is made of mild steel and zinc plated. The clamp is made up of spring steel of thickness O.6 mm and zinc plated. etc. Fabric degree of opacity 100%, thickness 0.65mm, weight 415gm / square meter, 100% polyester composition all complete as per Consultant's drawing, Specification and as per direction of Engineer - in - Charge.

Supply and installation of office Almirah, with 4Shelf. Product Size: 916mm(W) x 486mm(D) x 1980mm #- Excluding Leveler. Construction & Material: Welded construction. 0.7mm thk (±O.07mm) CRCA* for shelf 0.8mm thk (±O.08mm) High yield strength CRCA** for doors and back. 0.9mm thk (±O.08mm) CRCA* for all other components. *CRCA 'D' grade as per IS:513 CRCA S D' grade high yield strength as per IS:513. Locking & handle: Mazak handle. Three way locking mechanism with shooting bolt. Shelving : Height wise adjustable shelf mounting. Uniformly Distributed Load Capacity per each full shelf is 40 Kg maximum. 4 Nos. of adjustable full shelf. Box file A4 size (85Wx345Hx285D) can be stored vertically on three shelves and the clear space above fourth shelf is 240mm. Leveler: MIO screw type leveler with hex plastic base. Finish: Epoxy Powder coated to the thickness of 50 microns (+-10). as per direction & satisfaction of Engineer in charge.

Product Dimensions ‎18.2W x 30.7H Centimeters Special Feature ‎Rust Proof, Pressure Release Valve Colour ‎White-Blue Wattage ‎3 KW POWERFUL INSTANT HEATING: The geyser is powered by a superior 3 kW heating element with a copper sheath and high-grade magnesium oxide insulation for quick movement of heat ADVANCED 4 LAYER SAFETY: Pressure release valve for safer operations at higher pressures, ISI marked thermostat for cutting off power supply when temperature exceeds 55°C, Overheating protection through disc type snap action safety device operating at 90°C & Anti-siphon Protection for preventing the reverse flow of water HIGH DURABILITY: Robust Inner Tank of Zio is made of high-grade 304 Stainless Steel | Rust-proof high-quality engineering polymer constitutes the Outer Body, preventing rust formation

Providing & supplying of Fibre Pillow of of skipper, trident or equivalant size - 350 mm (Wide) x 550 mm (long) apprx. as per manufacturer's specification. The rate includes cost of material, labour, loading, unloading & transporting etc. including all taxes complete as per direction of Engineer In Charge

Providing & supplying of Pillow cover of of skipper, trident or equivalant size - 450 mm (Wide) x 590 mm (long) apprx. as per manufacturer's specification. The rate includes cost of material, labour, loading, unloading & transporting etc. including all taxes complete as per direction of Engineer In Charge

Double Bed Sheet Providing & supplying of Double bed sheet of skipper, trident or equivalant size - 1800 mm (Wide) x 2000 mm (long) apprx. Material: 100% cotton, Thread Count: 185 pattern :- white Size: Bedsheet: 72 inch x 83 inch, Care Instructions: Tumble dry gentle, Medium heat, Hand wash cold or machine wash cold with gentle cycle, Iron steam or dry with low heat, Do not bleach, Do not dry clean as per direction of Engineer In Charge

Supply and placement of Double Comforter Filling : 300 GSM Unique Feature : Both Side Usable (Reversible Use) Size : 214 CM x 236 CM Approx ± 5% Weight : 2.9 KG Filling Material : Thermal Bonded Micro Fiber (with long-lasting Hypoallergenic protection against Allergens) Work : Strong Machine Quilting Care : Home Washable, Odor Free, Long Durability as per direction of Engineer In Charge

Double Comforter Zip Cover Material- Glace Cotton II No Color Fading After wash Size- Quilt Cover for double bed (Dohar)- Approx 90x96 INCH or 230x240 in CMs Reversible- SAME ON BOTH SIDES / Zipper for Closure Set Contents: 1 Pc white Stripes Double Size Duvet Cover II Quilt Cover IIRajai Cover (without filling) for Home Hotels PGs Guest House etc Care Instructions- Easy wash or Machine Washable in a gentle cycle as per direction of Engineer In Charge

Single Comforter Supply and placement of Double Comforter Filling : 300 GSM Unique Feature : Both Side Usable (Reversible Use) Size : 214 CM x 136 CM Approx ± 5% Weight : 2.9 KG Filling Material : Thermal Bonded Micro Fiber (with long-lasting Hypoallergenic protection against Allergens) Work : Strong Machine Quilting Care : Home Washable, Odor Free, Long Durability as per direction of Engineer In Charge

Single Comforter Zip Cover Single Comforter Zip Cover Material- Glace Cotton white, No Color Fading After wash Size- Quilt Cover for double bed (Dohar)- Approx 90x40 INCH Reversible- SAME ON BOTH SIDES / Zipper for Closure Set Contents: 1 Pc white Stripes Double Size Duvet Cover II Quilt Cover IIRajai Cover (without filling) for Home Hotels PGs Guest House etc Care Instructions- Easy wash or Machine Washable in a gentle cycle as per direction of Engineer In Charge

Single Bed Sheet Providing & supplying of single bed sheet of skipper, trident or equivalant size - 1300 mm (Wide) x 2000 mm (long) apprx. Material: 100% cotton, Thread Count: 185 pattern :- white Size: Bedsheet: 50 inch x 83 inch, Care Instructions: Tumble dry gentle, Medium heat, Hand wash cold or machine wash cold with gentle cycle, Iron steam or dry with low heat, Do not bleach, Do not dry clean as per direction of Engineer In Charge

Supply and placement of Bath towel set for everyday use Made using 100% cotton that is soft with cotton terry on top 380 GSM fabric has specially processed fibres with air pockets for extra bounce and softness Combed cotton fibres additionally reduce lint build-up, ensuring durability Colour is fade resistant and long lasting Absorbs water while giving users a good feel Clean hands/ face/ body from water, dust and sweat Size:- 140 cm x 70 cm (55.11 in x 27.55 in) Package Contents:- Solimo 100% Cotton 2 Piece Bath Towel Set, 380 GSM, Colours: White as per direction of Engineer in charge

Supply and Installation of Roll Carpet Machine made Lucerne 1173 Aspen Black 12x8 or equivalent as per direction of Engineer in Charge

Supply and installation of wooden floor hardwood plunk, sizes of 15 mm(t) and 125 mm(w) and 1000 mm (1.8 sq.mtr./Box) in length of Kiln Dried of auto-computer KD room consisting of Moisture Content - Boards are supplied with an average moisture content of 8% (+ 2%) is 8-10%. Precision Engineering - Landing Deviation: 0.2mm (0.3mm in localized areas). Thickness difference < 0.2 mm, length difference < 0.2 cm, width difference < 0.2 mm, edge straightness < 0.2 mm, board ends are right angled at + 0.3mm - square ness < 0.2 mm. Resistance to Indentation (Preliminary) 34 N/mm2 (3,4 Hardness Brinell)-Impact Resistance – EN 438-2.11 >5N and Scratch Resistance- EN 438-2.14 > 2.0N. Resistance to Abrasion (Preliminary) is Factory lacquered: Wt = 0.0015 mm and Abrasion Resistance -ASTM 4060, (prEN 175.333.08) (S.33) IP >550. The Slip Resistance (Preliminary) is factory lacquered: 0.4-Layer construction-471- waterborne UV-PU insulation coat > 10g/m2, 611-UV Filler > 35g/m2, 661-HPC UV Duro Sealer >50g/m2 and 661-UV Sealer >20g/m2. The factory oiled: 0.4 is 651-HPC UV Anti Scratch-Topcoat >12g/m2 and Adhesion- EN ISO 2409 0-1 - (DIN 18032/2) as per direction of Engineer in charge.

Supply and Installation of Automated motorised wireless remote operational Blackout Rollar blinds of MAC or equivalant from Greenguard (UL), OEKO-TEX Standard 100, SHWO 079120 TESTEX certified manufacturers in all Specification of motor: 6/17 (Wireless Solution) Nominal torque (Nm) 6, Nominal speed (rpm) 17, Normal supply voltage Frequency (Hz) 230, Maximum number of turns in one direction 250 Current consumption at nominal torque (w) 90, Rated current (amps) .45, Running time before thermal protector trips ( min) 4 Thermal protector tripping temperature 140. Control unit: The Control unit is made of high strength reinforced plastic. The clutch is of wrap spring design. High carbon steel springs are provided to transmit motion from driving to driven members of clutch mechanism. Clutch is operated directionally by the use of endless beaded chain. Idler: Idler is of high strength reinforced plastic, consisting of a centre shaft. The idler is mounted on the bracket by using a plastic lock. The metal sleeve inside the plastic lock provides bearing surface for the centre shaft, which rotates freely, providing smooth, quiet and long wearing operation. Head rail: It is an aluminium extruded rail! Power coated in white. Control unit and Idler are mounted on the Head rail with powder coated M.S. brackets. Roller tube: It is an anodized extruded tube of high strength alloy. Control unit and Idler are fixed to the either ends of the tube. The fabric of the blind is fitted to the tube with heavy duty adhesive tape. Bottom rail: It is an aluminium extruded rail with a groove for fixing the fabric and power coated in white. It is fixed to the bottom of the fabric and the purpose of it is keep the fabric in tension and straight. The fabric is fitted to the tube using plastic insert. The end caps of the tube are ABS. 'L' bracket is made of mild steel and zinc plated. The clamp is made up of spring steel of thickness O.7 mm and zinc plated, .etc. Specification for Fabric BGR 5605 Blackout Make : MAC Composition : 100% Polyester, Degree of Opacity : 100%, Width : 250 cm, Weight per sq.mtr : 415 gm, Thickness : 0.65 mm all complete as per direction of Engineer - in - Charge.

Add @ 9% CGST

Add @ 9% SGST

Add @ 1% CESS

KOLKATA INTERIORS PRIVATE LIMITED

SANKAR FURNITURE