Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹2.1 Cr
EMD Value
₹3.7 L
Closing Date
22 Nov 2023, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Krishna Bhagya Jala Nigam Limited
Executive Engineer
CONSTRUCTION OF BRIDGE ACROSS JAGIRNANDIHALNALA AT JAGRINANDIHAL VILLAGE IN LINGASAGUR TQ
KBJNL/2023-24/BR/WORK_INDENT23
KBJNL/2023-24/BR/WORK_INDENT23
Open
Bridges/Culverts
Two Tender Document System(Two Cover)
KBJNL Division NLBC Divn No 4 Rodalabanda
9 documents required · 9 mandatory
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Satisfactorily completed (at least 90%) as prime contractor at least one such similar work i.e Construction of Bridge of value not less than Rs.124.68 (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - 840 cum, Reinforcement Steel-64.00 ton, Embankment/Earthwork/Subgrade- 2313.00cum, GSB-454 cum, Pitching (SSM/RSM) -129 etc) (80% of peak rate of construction)
BID CAPACITY The tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value The available tender Capacity will be calculated as under Assessed available tender Capacity AxNx1.5-B Where A Maximum value of civil engineering works Executed in any one year during the last five years (updated to 2022-23 price level) taking into account the completed as well as works in progress. N Number of years i.e., 0.5 year (06 months) prescribed for completion of the works for which tenders are invited. B Value at 2022-23 price level, of existing commitments and on-going works to be completed during the next (Period of completion of the works for which tenders are invited) FY in which the tenders are invited. FY in which the tenders are invited. Note1 The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be certified by statutory auditors of the company or by the proprietor of the company through an affidavit
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. 499.00 Lakhs)
Liquid assets and /or availability of credit facilities of no less than Rs.75.00 Lakhs (estimated cash flow for 3 months of peak construction period)
A valid copy of valid Karnataka PWD Class-1 Registration Certificate
The requisite Earnest Money Deposit in e-cash
Copy of Valid Employees Provident Fund Registration Certificate
Copy of Valid GST Registration Certificate
₹5,000
₹3.7 L
6 Nov 2023
6 Nov 2023
24 Nov 2023
9 Nov 2023
9 Nov 2023
CONSTRUCTIONOFBRIDGEACROSSJAGIRNANDIHALNALAATJAGRINANDIHALVILLAGEINLINGASAGUR TQ
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification (Granular Material) with all lead and lifts as directed by the engineer...
Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification with all lead and lifts as directed by the engineer incharge of the work.
PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification RCC M15 for Apprroch road with all lead and lifts as directed by the engineer incharge of the wor...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Supplying, Fitting and Placing TMT FE 550 bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. with all lead and lifts as directed by the engineer incharge of the wor...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Supplying, Fitting and Placing TMT FE 550 bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. with all lead and lifts as directed by the engineer incharge of the wor...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Supplying, Fitting and Placing TMT FE 550 bar Reinforcement in Sub structure complete as per Drawing and Technical Specifications.with all lead and lifts as directed by the engineer incharge of the ...
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towar...
Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant) No.1500, 1600, 1700 & 2704 with all lea...
Providing and laying 12 mm thick mastic asphalt wearing course on top of deck slab excluding prime coat with paving grade bitumen meeting the requirements given in table 500- 29, prepared by using mas...
Providing and laying of asphaltic plug joint to provide for horizontal movement of 25 mm and vertical movement of 2 mm, depth of joint varying from 75 mm to 100 mm, width varying from 500 mm to 750 mm...
Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification with all lead and lifts as directed by the engineer incharge of the work.
Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications (Stones)/Bou...
A toe wall for toe protection can either be in dry rubble masonry in case of dry rubble pitching or pitching with stones in wire crates or it can be in PCC M15 nominal mix if cement concert block have...
Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification.with all lead an...
Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specification with all lead and lifts as directed by the engineer incharge of the work.
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work
Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of ...
Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. Available Earth (...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...
Construction of Granular Sub-Base of required grading (VI) as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grade...
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel...
Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90 kg per m2 using mecha...
Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.250 kg/m2 on the granular surface Tack coat on Granular surface treated with primer o...
Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-A) or 13.2 mm to 0.09 mm (Type-B) aggregates using VG-30 bitumen to requ...
Providing and fixing of typical Logo board as per specifications and drawing. Two ACP Sheet of 3mm thick, top and Bottom plate duly welded/bolted with MS Square angle 25mm x25mmx 5mm size on back and ...
Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in double row including fixing collar with cement mortar 1:2 but excluding excavation,...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
awp 2022 23 order (1).pdf
Others - Approved AWP LIST • 0.53 MB
dtp kw4 nandihal bridge.doc
Tender Document • 4.40 MB
kw-4 tender notfcn bridge.docx
Others - Tender notification • 0.06 MB
bridge sanctioned abstract.pdf
Others - ABSTRACT SHEET • 4.73 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .