Temporary EI work

Amount

Providing and installation on hire basis of following TPN SFU fixed on angle iron frame on ground and providing necessary termination by socketing the cable/wire ends including 2 nos earthing attachment and dismantling the same after completion of the programme.(hiring period up to 15 days)

415V, 250 A SFU with HRC fuse

415V, 100 A SFU with HRC fuse

Providing and installation on hire basis of 415V, bus bar chamber comprising of 4 nos. copper bars of 500 A capacity, fixed on angle iron frame including necessary interconnection along with termination by socketing the cable/wire ends and 2 nos earthing attachment and dismantling the same after completion of the programme.(hiring period up to 15 days)

Providing and installation on hire basis of 415V 6 Way TPNMCBDB comprising with 100A FP MCB isolator as incomer and18 nos 16-32A SPMCB as outgoing including necssary interconnection in a outdoor type pillar box along with necessary termination by socketing the cable/wire ends including 2 nos earthing attachment and dismantling the same after completion of the programme.(hiring period up to 15 days)

Providing and installation on hire basis of 250V, (2+12)Way S.P.N.D.B. with 63 Amp.DP Isolator as incomer and 6-32A SPMCB as outgoing fixed on angle iron frame including necessary termination by socketing the cable/wire ends including 1 no earthing attachment and dismantling the same after completion of the programme.(hiring period up to 15 days)

Providing and installation on hire basis of 500 V, 250 A on load changeover switch fixed on angle iron frameon grond including necessary termination by socketing the cable/wire ends including 2 nos earthing attachment and dismantling the same after completion of the programme.(hiring period up to 15 days)

Providing and drawing on hire basis of the following sizes pvc insulated and unsheathed multistranded copper wire including necessary termination by socketing the wire ends including carrying cost at the sites and dismantling the same after completion of the programme.(hiring period up to 15 days)

7/0.036(7/20) single core copper wire

7/0.029(3/20) single core copper wire

Providing and drawing/ laying on hire basis of the following sizes pvc insulated and unsheathed multicore Aluminium armoured cable including cable glands,necessary termination by Aluminium sockets with carrying cost at the sites and dismantling the same after completion of the programme.(hiring period up to 15 days)

4C X 50 Sqmm

4C X 35 Sqmm

4C X 25 Sqmm

4C X 16 Sqmm

Providing and fixing on hire basis of following lights including necessary fixing arrangements with carrying cost at the sites and dismantling the same after completion of the programme.(hiring period up to 15 days)

Single LED Tube Light 20/18 Watt

12 Watt LED Bulb with holder

9 Watt LED spot Light

Providing and fixing on hire basis of following lights including necessary fixing arrangements with carrying cost from company's godown to sites and from sites to company's godown and dismantling the same after completion of the programme.(hiring period up to 15 days)

250V, 250W LED flood light fittings having IP66 protection.

Providing and installation on hire basis 5A/15A plug socket complete set for 15 days with necy wiring in 3x 1.5 sqmm single core copper wire with all accessories with carrying cost at the sites and dismantling the same after completion of the programme(Aveg Run-10 Mtr) (hiring period up to 15 days)

Providing and irrection on hire basis of 10 mtrs steel tublar pole with 1 no earthing including carrying cost at the sites and dismantling the same after completion of the programme.(hiring period up to 15 days)

Providing and installation on hire basis full metal body 600 mm sweep Air Circulator Fan including necessary connection by 3 pin plug top, body eartthing and carrying cost from company's godown to sites and from sites to company's godown and dismantling the same after completion of the programme.(hiring period up to 15 days)

Providing and installation on hire basis of earthing by 50 mm dia GI pipe(ISI medium) as per GS.(hiring period up to 15 days)

Providing on hire basis 415V, 3 Phase CPCB approved diesel generator set for Prime/Standby operation incl transportation ,operation , mobil without Diesel for the Programme period.The DG will run during the testing and programme period.

125 KVA ( 1 Set ) Red Road

125 KVA ( 1 Set)Back up

62.5 KVA ( 1 Set ) Palasy Gate Road

62.5 KVA ( 1 Set ) ladies Golf ground

62.5 KVA ( 1 Set) Brigade Parade Ground

Operation & guarding of the above installation 3 Numbers Skilled and 3 Numbers Unskilled labour per shift for 3 shifts ( 24 Hrs) from the beginning of the installation and upto dismanting time for proper upkeepment and preventing any unwanted incidents like theft,willful damage etc ( no additional charge will be paid for any unwanted incidents)

18 % GST on the total amount from SL no 01 to 15

Supply and handing charges for diesel for the above generator.(As Per actual Running Period)

Special Terms and conditions for Temporary E.I. Work - 1) Earthing should conform to IS specification. Earth Continuity wire should not be broken / Jointed. Single Earth continuity wire should be used from Earth Bus-Bar to the installation. 2) All 3ɸ Electrical Panel Should be earthed by two nos. of separate earthing and 1ɸ panel should be earthed by one no earthing. 3) MCB / Rewirable Fuse type Distrubution Board should be installed with proper Trip Current setting / fuse wires. However, MCB type DBs are preferable. 4) No Part of the Electrical Circuit in the pandal / Structure shall be within 12 inches of any decorative cloth / paper. 5) Ordinary Flexible wires should not be used. Only new PVC insulated & sheathed wires (Bearing ISI mark) or PVC insulated wires of FRLS (Fire Resistant Low Smoke) type (ISI Marked) are allowed. 6) All cable ends should be properly sockedted. 7) All joints shall be made with porceline insulated connectors. Twisted & lapped joints shall be avoided. But Joints are strictly not allowed in the dias. 8) Cables / Wires should run along outside the Dias. 9) Ceiling fan (s) / Electrical fittings must not be suspended from the ceiling of Dias. Pedestal fans are not allowed on the Dias. However, Pedestal fans may be installed outside dias, but the body of the fan must be properly earthed.

10) T/L fittings shall be of box type (Indoor commercial type). Any kind of open type fittings must be avoided. 11) Each A.C. Machine should be connected with a separate circuit and earthing should be provided by separate single earth contunuity wire from Earth Bus-bar. 12) P.A. System and Microphone shoud be earthed. 13) Sufficient quantity of Fire Extinguishers and First Aid Box should be provided. 14) If the DGs are not placed at site on time pro rata rate will be reduced from bill. 15) The guarding /security arrangement of all the hired products /installation has to be made by the successful bidder at his/their own cost and responsibility. No additional charge will be paid for any unwanted incidents like theft, damage due to natural calamities or any other reasons whatsoever. 16) During entire hiring period any fault to the hired installation shall be rectified/faulty items replaced, at the cost of agency. Suitable man power for attending and rectification/replacement of damaged items has to be provided by the agency at their own cost. Rectification time is 1 hour for the event day and upto 2hrs for other days. 17) A test certificate cum safety certificate is to be provided by the agency, duly signed by the Supervisor of the agency after completion of installation. 18) A performance guarantee of hired DG sets and AC machines has to be provided by the agency after completion.

GHANASHYAM ELECTRIC STORES (BID ID -7753187)

SHREE GANESH ENTERPRISE (BID ID -7680052)