Supply and installation of tool plant machinery for up grading of Transformer repair workshop at Budgam in ED Budgam KPDCL

Amount

Supply and Installation of HT Coil Winding Machine Front tension upto 1000 kVA as per the following specifications 1. Range of wires : 10 to 26 SWG 2. Maximum coil diameter : 400 mm 3. Layer width : 300 mm 4. Winding speeds : 90, 180, 360/ as per cust.req. 5. Height of center over floor : 1000 mm 6. Motor : 2H.P/three phase 7. Traverse : Semi Automatic The machine should be complete With 5-figures reset turn counting meter, Electric Motor (Crompton Greaves), Reverse switch and Complete with powder coated/Synthetic Enamel paint etc.

Supply and Installation of LT Coil Winding Machine upto 1000 kVA as per the following specifications 1. Maximum coil diameter : 1000 mm 2. Maximum Distance between centers : 1200 mm 3. Winding Speeds approximate : 23,36,56 rpm. 4. Diameter of face plate : 450 mm 5. Height of centers over floor : 1000 mm 6. Load capacity between centers : 400 kg 7. Motor H.P/K.W/R.P.M/A.C :2/1.5/1440 8. Phase :Three The machine should be complete With tail center adjustable, 5-figures reset turn counting meter, Contactor L & T make, Reverse Switch , Footswitch , Electric Motor (Crompton Greaves), Complete with powder coated / Enamel paint etc.

Supply and Installation of Cutting/ Shearing Machine as per the following specifications 1.Cutting Blade Size - 48” 2.Floor Size - 1200 mm x 1200 mm 3.Height - 36 Heavy Duty Hand Operated Shearing Machine to cut insulation_Paper/Board upto 3mm thickness,Table mounted hand operated shearing machine. One attachment is fitted with the machine for adjusting the press board cutting length. One handle is fitted with the blade for cutting the board smoothly. One foot Paddle is also incorporated with the machine foe a clumping the press board cutting.

Supply and Installation of Air Compressor Capacity 3 HP as per the following specifications Motor - 3 H.P Operating Pressure - 7 Kg/cm Free Air Delivery - 3.89 CFM Air Receiver - 100 Ltr Tank Capacity - 90 Ltr. The machine should have all the necessary accesories plus numetaic spanner, air regulator and air release safety valve.

Supply and Installation Portable Welding Machine 10-250 Amp. as per the following specifications. Welding current range - 10-250 Amp. Duty cycle 60%/100% - 250A/194A Open Circuit Voltage - 45V. Input voltage -220V +/- 5%. Frequency- 50 Hz. Cooling- Forced Air Natural. Insulation class-H. Type of output current regulation- Rotary pin Type mode.

Supply and Installation of Wolf Drill Machine Heavy Duty as per the following specifications Drilling Diameter- 13-23 mm fitted on a stand. Operating voltage- 215-230V. Noload speed - 560 rpm

Supply, installation of Electric Double girder EOT Crane 10 Tons. Girder length 9 mtr.

Supply, installation and commissioning of Hydraulic Trolley (2.5 tonnes Handlift Pallet Truck Heavy Duty)Capacity (kg) : 2.5 tonnes Max Fork Length : 1150mm Min Fork Width : 160mm Outside Fork Spread : 550mm Inside Fork Spread : 230mm Maximum Fork Height : 230mm Lift : 115mm Lowered Fork Height : 85mm Head Length : 415mm Overall Length : 1540mm Overall Height : 1220mm Truck Weight : 66kg Load Roller Diameter x width : 70x60mm Steering Wheel Diameter x width : 180x50mm

Supply and Installation of Oil Testing Machine 0-60 KV.

Oil filtration Plant 2400 LPH

Supply and Installation of Heating chamber/Oven required for drying of transformer, transformer coils from 10 KVA to 1000 KVA capacity in Transformer repairing Workshop with dimensions 9Feet (L) x 7 Feet (W) x 8Feet (H) for detailed specifications enclosed in SBD (Annexure B).

Supply of 3-Phase 3-hp monoblock pump with flexible rubber pipe(30 mtr long) oil resistant & temperature resistant upto 150 degree celsius type.

Supply of Megger (0-2500 V) (ISI Brand).

Supply of Hookon/clamp on Meter.

Supply of Bench vice.

Supply of D-Spanner H. Duty (ISI Brand) complete set.

Supply of Box Spanner (ISI Brand) Complete set.

Supply of Pipe Wrenches (ISI Brand).

Supply of Screw Driver of Sizes (Plastic Handle) (ISI Brand)

Supply of Plier of Sizes (ISI Brand)

Supply of Cutting Plier of Sizes (ISI Brand)

Supply of Plastic Hammer (ISI Brand)

Supply of Steel Hammer of Sizes (ISI Brand)

Supply of Scissor of Sizes (ISI Brand)

Supply of C-Spanner H. Duty (ISI Brand) Complete set.

Supply of Crimping tool of Sizes (ISI Brand)

Supply of 3 layer PVC tank of capacity 1000 litres with temperature bearing capability upto 100 degree celsius.

Supply of Chain pulley block of capacity 10 ton.

Supply of Chain pulley block of capacity 5 ton.

Supply of Vernier callipers for measuring Inner dia. And outer dia of coils and wire

Wiring of workshop building by way of providind of 3-Phase Supply to Machinery(4sq mm) and single phase supply to lighting loads, fans etc (2.5 Sqmm).

Supply,intallation and testing of 300 Amp Change Over for Genset and Main Supply.

Supply and Installation of wall mounted fans with all necessary accessories.

Supply and Installation of LED lights of capacity 120 watts with all necessary accessories.

NOTE: 1.The rates quoted by the bidder for all the line items shall be inclusive of GST/freight/insurance/storage/testing and any other charges FOR workshops at Budgam of ED Budgam.

M/S LA INTERNATIONAL

M/S M M ENTERPRISES

ROUF AHMAD SHAH