providing Mini WSS for Shri Somshwar Bansiddheshwar Mandir Devasthan At Hattur tal South Solapu

Bore Well Surveying

Drilling a bore by machine with required depth.

Providing & fixing of casing of pvc pipe 10 kg/sqm. 180mm dia.

Providing and fixing bore cap

Taking yield test for bore

Pumping Machinary: Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump. PM 1-2 Submersible Pump 150 mm dia (with Bronze / Stainless steel (CF8M) Impeller) up to 8 stages PM 1-2-12 12.5 HP (Elect. CSR 23-24 page - 01 it no. PM1-2-5.7)

Extra stages

Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS- 239/2004.Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below.vii) 65 mm. ( 8.02 kg./m ) MJP DSR 23-24 page -93 it no. 1 C-VII)

Lowering ,laying and jointing GI pipesand specials of following class and diameter including conveyance from stores to site of works ,all labours giving satisfactory hydraulic test ,etc complete either underground or in vertical position ,as directed by Engineer in charge vii) 65 mm. ( 8.02 kg./m ) (MJP DSR 23-24 page -105-106 it no. 2C-VII)

G.I. Bend "B" Class Supplying and erecting "B" class G.I. Bend in position with necessary material PW 1-4 65 mm dia G.I.bend. (Elect. CSR 23-24 page 14 it no. PW1-4)