NIT No GE/ND-61/2025-26

Amount

B&R PORTION: Dismantling of existing roof tretment/ roof tiles (laid flat or on edge) including Mud phuska on roof surface laid bedded and pointed in any mortar incl removing the surplus soil or unserviceable material out side the MOD land complete all as specified and directed.

M&L for cement concrete 1:2:4 type B0 (using 12.50 mm graded stone aggregate) as in levelling coarse over RCC slab to bring the desired slope up to four storied Bldg, using water proofing compound as per manufacturer instruction complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separately.

M&L for 15 mm thick rendering on fair faces concrete at roof slab concrete surface in cement mortar 1:4 and finished even and smooth mixed with integral water proofing compound all acomplete all as specified and directed. Note: WPC will be measured and paid separately as supply only

M&L for surface Preparation: The surface to receive the treatment shall be thoroughly free of laitance, scales, oil or any other loose material. It should be made free of any sharp objects. Cleaning of PCC/plaster surface shall be done with wire brushing to attain smooth levelled surface. Application of Asian Paints two component Epoxy Primer (Resin & Hardener) on the cleaned surface for bonding of Polyurethane with the existing concrete surface. 33 % water dilution is recommended with the pure mixed primer. The primer mixing ratio will be 1:3 (Resin:Hardner). Supplying, providing and applying waterproofing treatment to Podium area with single component highly elastomeric seamless cold applied modified PU coating complete as per manufacturer’s specifications and application methodology. The same coating shall be applied in two coats achieving a total thickness of 1mm. The coating shall have a dual combination of 280% elongation. Material coverage 1.2kg /sq.mt complete all as specified and directed. Make: Fixit Roof seal 148/ Asian Paint smart care damp proof/ SIKA 710/715/ Ms Fosroc Chemicals/ Ms IWL India Ltd

M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered and hold fast on edge including necessary form work complete all as specified and directed.

Demolion of PCC at any places as directed at site and remove it out of MOD land complete all as specified and directed.

M&L for providing 75 mm thick cement concrete 1:2:4 type B-2 (using 40 mm graded stone aggregate) as in floor with and including use and waste of form work complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints using solvent adhesives fixed to walls with brackets and clamps etc of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) bends/Tees/Elebo/shoose etc of any radius of 110 mm bore complete all as specified and directed.

Supply only liquid water proofing compound as per manufacture instruction complete all as specified and directed.

Taking down cement plaster at any position from brick or concrete surface incl racking out joints hacking for key and scrubbing down with water complete including removal of rubbish off the premises complete all as specified and directed by Engg in charge.

M&L for premix/readymix plaster 15mm thick on brick or concrete surfaces of walls, chajja, balconies, beams, columns, manholes etc and similar work finished even & smooth including necessary scaffolding, form work, safety precuation up to multi storey of bldgs complete all as specified and directed.

All as per item No 12.00 above but for 5 mm thick on ceiling complete all as specified and directed.

M&L for Preparation of new plastered or un-plastered surface of wall and applying two coats of distemper oil emulssion, white or tinted with roller finish on any position over a coat of primer including preparation of surfaces with the application of multy layer of cement base wall care putty upto smooth fininshing complete all as specified and directed.

M&L for complete removal of existing treatment by mechanical grinder from old surfaces of ceiling/wall and applying two coats of distemper oil emulssion, white or tinted with roller finish on any position over a coat of primer including preparation of surfaces with the application of multy layer of cement base wall care putty upto smooth fininshing complete all as specified and directed.

M&L for preparation of new plastered ceiling surfaces and applying two of distemper oil emulssion, white or tinted over a coat of primer paint including 3mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment from ceiling surfaces and applying two of distemper oil emulssion, white or tinted over a coat of primer paint including 3mm thick wall care putty complete all as specified and directed.

S&F mild steel work as in frame work, hanging structure (angle, flat, rond, rectangle, square or circle) including necessary welding or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-410 complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/frame work of size 45 x 70 mm comprising of virgin PVC polymer complete all as specified and directed.

S&F CNC Cut design as approved by GE at 18 mm thick WPC sheet, factory made, masure free, water proof, external uses fixed to WPC frame work at vertival and ceiling as required as site with stainless Steel screw full body threaded/butt hinges of required size over suitable multi coat of high-water resistance and is very durable and apply tow coat of glosy deco paint at external surface complete all as specified and directed. Note : WPC frame shall be measured and paid saparately

S&F PVC Fluted Wall/ ceiling panel of sise 125x 25mm square and 3mm thick holow tongue and grove type of multi colour as directed by GE for commercial uses panel suitably placed in wall/ceiling with ss clit @ specing 300mm c/c fixed to wall/celing with ss screw and plug complete all as specified and as directed.

S&F PVC 5mm thick Wall/ceiling panel square and 0.9mm thick holow tongue and grove type of multi colour as directed by GE for commercial uses panel suitably placed in wall/ceiling with ss clit @ specing 300mm c/c fixed to wall/celing with ss screw and plug complete all as specified and directed.

S&F 12mm thick block board fixed to wooden of size 25 and 25 mm for back lid/suitable for LED strip over pasting 2mm thick UV marble sheet by the use of adhesive and lipping shall be proved all around in same colour. Colour of sheet shall be provide as directed by Engineer in charge and fixed to wall/ceiling with ss screw and plug complete all as specified and directed.

M&L for mirror plished by mechinical process to existing granite/Kota stone flooring including moulding or making round or oval shape as required complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness in floors, apron, laid, dry and pointed complete all as specified and directed and remove it out of MOD land complete all as specified and directed.

M&L for machine cut Kota stone slab flooring, 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the floor including grinding, rubbing and polishing (granite finish) and exposed edges of Kota stone shall be rounded complete over and including 20 mm thick screed bed or bedding layer in CM 1:6 finished even and rough complete all as specified and directed.

M&L for colour/white marble stone (mirror polished) of 16-18 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the floor including grinding, rubbing and polishing (granite finish) and exposed edges of stone shall be rounded complete over and including 20 mm thick screed bed or bedding layer in CM 1:6 finished even and rough complete all as specified and directed.

M&L for 16-18 mm thick granite stone any type machine cut at vertical surface, bedded and jointed with grey cement slurry and pointed with white cement with admisture of pigment to match the shade of granite stone including grinding and polishing and including rounded edges with shade of granite complete and including rendering 20mm thick in cement mortar 1:4 finished even and rough complete all as specified and directed.

M&L for Brick work with sub class "B" bricks , straight or curved on plan exc 6 m mean radius built in cement mortar (1:6),(up to two story Bldg) complete all as specified including demolition complete all as specified and directed.

M&L for multi layer POP false ceiling in steps (in layers) as per drawing and as dircted by GE at site with horizontal and vertical GI frame work and fiber/mess reinforcement as required including putty work for finishing smooth. Painting with plastic plastic emulsion paint in two coats over primer over fininshed POP surface with suitable arrangement for Spot light/ceiling light complete all as specified and directed. Note: Plan area will be considered for measurement & payment purpose only.

M&L for complete taking down of existing treatment and apply average 5 mm thick POP in multi layer at vertial wall surface for finishing smooth complete all as specified and directed.

M&L for Semi circular of width 15 to 25 mm and depth 15 to 25mm of each line of multilines POP work at wall as per drawing and as dircted by GE including prepartion of existing wall surface and putty work for finishing smooth. Painting with plastic plastic emulsion paint in two coats over primer over fininshed POP surface complete all as specified and directed.

M&L for rectangular of width 100mm and depth 25 to 35 mm POP work at wall as per drawing including prepartion of existing surface wall and as dircted by GE including putty work for finishing smooth. Painting with plastic plastic emulsion paint in two coats over primer over fininshed POP surface complete all as specified and directed.

Taking down chowkhats or frame exc 1.50 and not exc 4 sqm Each with shutter (without taking off shutters from the frame) and refixing in same opening complete all as specified and directed.

Taking down shutters of any description exc 1.00 sqm and not exc 2 sqm Each complete all as specified and directed.

S&F factory made flush shutters of 30mm thick, solid core construction, with particle board and plywwood face panels, commercial type on one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S&F High Gloss Finish Liner Laminate /High-Pressure Laminate (HPL) Sunmica of 1.0 mm thick of multi colour/design as approved by GE to be fixed with existing surface/new surface including complete removing all treatment or preparation of new wood/ply surface and apply best adhesive for pasting as per manufacture instruction complete all as specified and directed.

S&F 30 mm thick (batten thickness) second class hard wood, glazed and Skelton shutters, open rebated and prepared to receive glass, gauge, etc (without sash bars) edges of framing plain, chamfered or rounded with cut mitred beds for securing glass etc, supplied and fitted to chowkhats complete all as specified and directed.

S&F Stainless Steel (Grade 304) wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

M&L for complete removal of existing treatment in mechanical process from wood surfaces upto wood skin complete all as specified and directed.

M&L for deco paint in mechinical process of surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats up to mirror polishing like by mechanical process complete all as specified and directed.

S&F Mortise Door Handle Lock for Main & Internal Door in Residential & Commercial Spaces, 100 mm handle, with Lock Body & 3 Keys type 4 levers (Make : Harrison, Godrej, Link) complete all as specified and directed by Engineer-in-Charge.

S&F heavy duty door magnet stopper is constructed of high quality virgin plastic, solid, sturdy and rust-Proof for hold and clatch fixing to back side of door shutter including all fixing items complete all as specified and directed.

S&F Stainless steel barrel tower bolts of extruded section and fixed 200 mm long complete all as specified and directed.

S&F Stainless steel decorative handles of extruded section and fixed 150 mm long complete all as specified and directed.

S&F in repair for 300mm long mild steel ordinary rat rail rod pattern door springs including roller and roller plate including welding work complete fixed to pressed steel frame complete all as specified and directed.

M&L for completed removed of paint from wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for cleaning of joints 100/75 mm bore cast iron soil, waste and vent pipes in any length (height upto 6 floors) and filled with cement joints complete all as specified and directed.

S&F Stainless Steel (Grade 304) butt hinges of size 100mm complete all as specified and directed.

S&F pressed steel frame of size 125 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges,lock ,strike plate, etc complete all as specified and directed. Note: All the work in these items shall be carried out as per Architectural drawing attached with the CA and as per the direction of Engg in charge and GE

E&M PORTION: Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fixture and fittings such as switches, light fittings,ceiling rose, pendent holders, bell, regulators and socket,light fittings etc .removing materials to store for keeping in safe custody or for taking credit and making good the disturbed surface & wall/ floor complete all as specified and directed.

M&L for concealed Point wiring using approved colour coding as per IS ,with stranded copper conductor 1.5 sqmm (nominal area ) single core , flame retardant low smoke and low halogen FRLSH PVC insulated unsheathed , 1100 V grade conforming to IS 694 ,marked multi stranded copper conductor including PVC conduit medium grade ISI marked 25 mm dia with all fittings and accessories, concealed type/ surface type (surface type only on ceiling), PVC junction boxes, modular metal sunken/flush boxes of any modules from 2 to 18 Modules with Inner and outer modular cover plates, including FRLSH flame retardant low smoke and low halogen rigid PVC insulated unsheathed stranded copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly for one light/ fan point controlled by one No, one way 5 Amp switch complete all as specified and directed by Engr-in-charge. Note :- (i) Modular metal flush/sunken Box along with modular switch/socket cover plate & sheet are inclusive in the item rate quoted. (ii) Only switch socket and fan regulators to be measured and paid separately (iii) Cost of appropriate size of Eye/Bottle thimbles made up of brass/copper used for connection in switches / sockets to be included in the quoted rate of this item. (iv) Cutting chases for concealed conduit and making good in cement mortar is deemed included in unit rate. (v) No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required. (vi) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion.

All as per item No 53.00 above but for One bell/ buzzer point controlled by one bell push button 6 Amp complete all as specified and directed.

All as per item No 53.00 above but for One 3 pin 5 Amps socket outlet on same board with but other switches complete all as specified and directed.

S&F in replacement modular switch 1 module, 6 Amp, 230/250 volts grade one way complete all as specified and directed. Make: Legrand Cat Part No 573400/ Havells Cat Part No ACNSXXE101, Schneider Cat Part No X1001WH

S&F in replacement Modular bell push switch 6 Amp 1 module, 230/250 volts complete all as specified and directed. Make : Legrand Cat Part No 673404/ Havells Cat Part No ACusbxw101/ Schneider Cat Part No X1005WH

S&F in replacement modular socket out let 2/3 pin 6 Amp combined 2 module shuttered type flush mounting type, 230/250 volts grade complete all as specified and directed. Make: Legrand Cat Part No 573470/ Havells Cat Part No ACAKPXW063/ Schneider Cat Part No X2005WH

S&F in replacement MCB DBs single pole with neutral sheet metal enclosures double door type, 240 Volts, with 200 amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete with out MCB and with enclosures blank plate for unused way suitable for 12 way including cutting chases and making good to walls complete all as specified and directed.

S&F in replacement MCB SP 6 to 32 Amp, type B or type C, 10 KA rupturing capacity, IS-8828 marked, complete all as specified and directed. Note: Make of the MCB should be the same as that of DB

S&F in replacement MCB SPN 32 Amps Type B or Type C, 10 KA rupturing capacity, IS 8828 marked and fixing in DB complete all as specified and directed. Note: Make of the MCB should be the same as that of DB

S&F warm/cool white rope light 140 led per meter AND adopter to connect as pe designe complete all as specified and directed. Make : Philips , Jaguar , Havells NOTE : NO OF ADOPTERS 8 PER 50 MTR OF ROPE LIGHT

S&F in replacement LED wall light two way with conical focus 6 watt warm white waterproof IP 65 suitable to fix outdoor/indoor ,aluminium body complete all as specified and directed. Make: Orient ,Philips , Havells

S&F in replacement LED downlighter 12 watt WW /NW/CDL recess mounted aluminium body and size as per sample aprooved complete all as specified and directed. Make: Philips Cat Part No Dura slim 12W or equivalent in Jaguar/ Havells

M&L for fixing cover box for single phase meter made of MS and having transparent glass cover decorative type of size upto 10x10 inch complete all as specified and directed by engr in charge. Note : cutting chessing and other masson work must be insured to maitain the surface of the wall smooth and symmetric to the existing. Note: All the work in these items shall be carried out as per Architectural drawing attached with the CA and as per the direction of Engg in charge and GE Note: (a) Srl Item No 03.00, 04.00, 07.00, 12.00, 18.00 to 24.00, 27.00 to 34.00, 37.00 to 39.00, 43.00, 46.00, 51.00, 53.00, 54.00 & 59.00 to 65.00 of BOQ are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody. (b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge.

M/S MSD & Associate (BID ID -3411733)