Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
Closing Date
29 Feb 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Accessories Division, Lucknow
HINDUSTAN AERONAUTICS LIMITED Accessories Division, Lucknow Post Office, Lucknow - 226 016 Uttar Pradesh, India
Design Development Qualification Certification of Three type of Self Lubricating Bush Bearing for Aerospace Application
5962
HAL/ADL/INDG/INST/ACTUATOR/BUSHBEARING/2
IMM
Lucknow, Uttar Pradesh
29 Feb 2024
6 Feb 2024
6 Feb 2024
29 Feb 2024
HINDUSTAN AERONAUTICS LIMITED
(A Govt. of India Enterprise Under Ministry of Defence)
Accessories Division, Ayodhya Road, Lucknow-226016, UP - INDIA
Temder/Enquiry No. : HAL/ADL/INDG/INST/ACTUATOR/BUSHBEARING/2 TECHNICAL BID
Supplier/Company Name Supplier's Offer Ref & Date:
Sl. No. Part No. Description and Detail Delivery Schedule Qty (Nos) Part No. Description with Detail Offered Qty (Nos) Unit Price without any GST orTaxes (Price not to mention in Technical Bid) INR Total Price without any GST orTaxes (Price not to mention in Technical Bid) INR Taxes (GST/ IGST etc) EXTRA in % Any other Charges(Fixed Charges etc). Total Amount Including Taxes and all (Price not to mention in Technical Bid) INR Remarks (Mention detail of any other charges/fixed cost etc if quoted)
1 (a) BUSH BEARING (Refer Annexure A for Technical Specification Detail ) Part No. 1920055002(LD) BUSH BEARING (Prototype Qty for Design, Development, Qualification & Certification phase) Within 6 months from date of order for Design, Development, Qualification & Certification phase 100
1 (b) Part No. 1920050003(LD) BUSH BEARING DIA 3 (Prototype Qty for Design, Development, Qualification & Certification phase) 100
1 (c) Part No. 1920050007(LD) BUSH BEARING (Prototype Qty for Design, Development, Qualification & Certification phase) 100
1 (d) Anticipated requirement for Production phase (after successful Design, Development, Qualification & Certification) For Part No. 1920055002(LD) 132
1 (e) Anticipated requirement for Production phase (after successful Design, Development, Qualification & Certification) For Part No. 1920050003(LD) 146
1 (f) Anticipated requirement for Production phase (after successful Design, Development, Qualification & Certification) For Part No. 1920050007(LD) 210
Notes: Vendor's Compliance
i) Material Test report and Inspection test report to be included with each item with each supply
ii) 05 quantity of aech type pf part (Out of 100 quantity as in 1(a), 1(b) & 1(c) will be required first for qualification purpose, remaining qunatity will be required after sucessful qulaifiaction).
iii) Items are required for Development and Ordering to be processed(1(a), 1(b) & 1(c) without Anticipated requirement quantity(1(d),1(e),1(f) for Production Phase. After successful development of item after review Production Phase requirement processing will be done separately. Bidder must submit offer for Anticipated requirement also. Please confirm
iv) L-1 Evaluation Criteria on package basis Total Cost for Prototype Qty +Total Cost for tentative production phase units+ Taxes and any other chargesApplicable etc (i.e.Total Amount Including Taxes and all for a+b+c+d+e+f)
1. Supplier is requested to fill information in the required cells which are highlighted in COLOR
2. Kindly note that HAL does not entertain Fax/ Email quotations unless otherwise specifically requested by us in our RFQ.
3. For general correspondence other than submission of quotations on portal kindly make use of the (E-mailID): [email protected]
4. Evaluation will be on Package basis . Therefore vendor has to quote for all lines . Calculation for evaluation of cost will be considered in totality. 5. Lowest one (L-1) Bidder will be decided on Grand "Total cost of Protype unit, Total cost of unit for tentative production phase qty + Taxes & Duties applicable on (Development cost, prototype cost and cost of production phase qtys) and any other charges(fixed charges etc)" and it will be on package basis i.e. for all lines. 6. Price Detail not to be fillled in Technical Bid Sheet and to be filled only in Price Bid Sheet placed separately in Tender.
Technical Compliance Matrix
Ref. : TENDER FOR INDIGENISATION OF 03 TYPE OF SELF LUBRICATING BUSH BEARING FOR AEROSPACE APPLICATION
Enquiry No. : HAL/ADL/INDG/INST/ACTUATOR/BUSHBEARING/2
Sl Tender Ref No. Description Requirement Vendor's Remark
1 3.1 Project entails indigenous Design, Development, Qualification & Certification of 03 Types of Self-Lubricating Bush Bearings as per the basic specification, drawings given at Annexure-A and other details given in this tender. Bidder has to accept all Terms conditions mentioned in Annexure-A & Annexure- B with full compliance.. Essential
2 3.2 Material Required for manufacturing should be as per Technical Specification attached at Annexure-A. Essential
3 3.3 Timeline for design, development and certification of these products will be 03 months from the date of release of order to vendor. Essential
4 3.4 These items must match in form, fit and function with dimensions and weight not exceeding that of existing unit. Desirable
5 3.5 All necessary documents required for airworthiness certification including COC, manufacturing process layouts; test results etc. shall be prepared by the Vendor and approved by airworthiness agency as applicable. Vendor has to prepare drawing of Self-Lubricating Bush Bearings. Essential
6 3.6 The vendor shall do necessary procurement along with COC (Certificate of Conformance) traceable to OEM as per approved document. Essential
7 3.7 The development procedure and Airworthiness Certification of Self-Lubricating Bush Bearings shall be as per IMTAR-2021 (Version-1.0) Essential
8 3.8 All development activities shall be done by vendor in co-ordination with RCMA, DGAQA, HAL Indigenization Dept., HAL QC & ASERDC as defined in the IMTAR-21 Version1.0 & AFQMS. Essential
9 3.9 Vendor shall develop & manufacture airborne 03 Types of Self-Lubricating Bush Bearings as per the approved technical specifications/drawings. Essential
10 3.10 As per drawing all dimensions including all geometrical tolerances are to be Inspected, recorded & certified by Development Agency’s Quality Control Department piece-wise. Same will be subjected to verification by HAL’s Quality Control Department, DGAQA & RCMA at HAL / Vendor’s site. Essential
11 3.11 The vendor shall also be audited as per AFQMS guidelines and first off article will be subjected to first article inspection as per AFQMS guidelines. Essential
12 3.12 Vendor has to develop 03 Types of Self-Lubricating Bush Bearings in Form, Fit and Functional Interface (FFFI) on turn-key basis, as per approved Technical Specifications. However, any minor change in technical parameter of the item suggested by regulatory agencies during design review stage shall also be considered by the developing agency without any cost implication. Essential
13 3.13 Vendor has to develop the item exactly as per the Technical Specification. The items/components used should be military-grade along with COC. Essential
19 5.1 Agency / Institution has to quote for complete set (i.e. functional prototype, Qualification testing and approval). In case Agency / Institution has not quoted for complete set the quotation will be rejected. Essential
20 5.2 Prices are to be submitted in Price Bid format only. Prices in any form should not be mentioned in Technical Bid (or any document part of Technical Bid) otherwise offer shall be summarily rejected. Essential
21 5.3 Only Indian Original Equipment Manufacturers (OEMs), with proven expertise in design, development & manufacture of similar items of aircraft are requested to participate in the Tender. Essential
22 5.4 The vendor should be with full knowledge in the field of design, development and supply of similar item / system and have developed/supplied in last 5 years same/similar/advanced specification type of item. Desirable
23 5.5 Details of similar projects (if any) completed by bidder including contact addresses of the existing customers should be provided (necessary documentary proof shall be provided). Desirable
24 5.6 If vendor has any dealing with Indian Air Force for similar items, the same shall be provided with contract / P.O. details. Desirable
25 5.7 Bidders should provide details of manufacturing facilities, details of current capabilities (technical expertise) related to design, manufacture, certification and supply of the proposed items. Essential
26 5.8 Bidders should have valid AS9100D accreditation (please attach supporting document). Vendor shall also ensure timely renewal of certification till completion of Project execution. Desirable
27 5.9 All applicable benefits to MSMEs as per Govt. guidelines will be applicable to MSME Vendors. Relevant Documentary evidence in this regards shall be uploaded along with the Bid. Essential
28 5.1 Bidder, who wants to avail exemption given to MSME vendors, should have UAN. Copy of the Udyog Aadhar Certification shall be submitted to consider such exemption to MSMEs” Essential
29 5.11 Vendor shall define quantitative amount of import (if to be used) in development / manufacture of these items. Indigenous content for each item should be minimum 50 % by value (on Cost basis of the base contract price). Vendor has to provide a self-declaration in this regard in attached format Annexure-H. HAL team may verify the documentary evidence to confirm the given indigenous contents after scrutiny. Bidder has to confirm and submit the undertaking stating that the system will be indigenously designed, developed, manufactured, tested, certified and supplied by the firm. Bidder should indicate the indigenous content (IC) of the system / item for development as well as production phase. The indigenous content (IC) should be more than 50% by value in line with DAP 2020. The Bidder should provide a "Self Certification" along with technical offer indicating that the item offered meets the minimum local content (MLC) (more than 50%) and provide the percentage of local content along with details of the location(s) at which the local value addition is made. It is mandatory to indicate compliance to MLC in technical bid zone. The signed certificate shall be provided on Bidder's letter head along with the offer. The offer received without indicating the percentage of local content & without Certification will not be considered & rejected. Essential
30 5.12 Performance Bank Guarantee (PBG): Bidder shall furnish a Performance Bank Guarantee (PBG) as per HAL’s format for 3 % of the order value (to be calculated only on basic cost excluding taxes & duties, if such details are furnished separately in the bid submitted) valid upto end of the warranty period from a scheduled bank in India from the date of acceptance of item or otherwise equivalent amount shall be retained till completion of warranty period and other obligation of Purchase order/Contract. In case, quotes received without indicating the break-up of GST, ED, VAT, sales Tax etc. and order placed subsequently on composite value (without indicating break-up details of taxes & duties) then the PBG will be applicable on the composite value. In case bidder does not agree for Performance Bank Guarantee/retention of equivalent amount, the offer will be summarily rejected.
30 7.1 Minimum following documents are required to be submitted by bidders: • Technical Bid (Compliance Matrix) -Annexure-B • Price Bid Annexure-D • Tender Terms & Conditions-Annexure-C • Self-Certification of Indigenous Content (IC)- Annexure-H • Declaration as per GFR 144 (xi), Annexure-I • Documentary proofs as required in Tender. • Prices for the Development Phase including prototype qty shall be at EC 2023 level with applicable GST and remain firm & fixed till completion of development phase. No escalation is applicable on Development Phase prices. • For Production units, unit price shall be quoted @ EC 2023 level (Calendar year) with applicable GST. • Bidders should indicate Price escalation formula with material & Labour content and Maximum Annual Escalation Cap (in percentage) for the production phase in Price Bid format only. • Quoted unit prices with Annual escalation as per Price escalation formula with the escalation cap indicated shall be valid for the entire quantity of production phase (Tentative Qty as mentioned in Price Bid) irrespective of time of placement of Purchase Order. Essential
31 7.2 Successful bidder will have to get registered at HAL Lucknow (If not already registered) and provide all the necessary documents as required. If vendor is already registered in any other division of HAL for similar activity, Vendor registration letter issued by the Division may be submitted. Essential
32 7.3 HAL may visit the vendor’s place for audit purpose during bid evaluation. In case any additional information or clarification is required, bidder shall have to provide it. Desirable
33 8.1 Response to bid through e-procurement should be uploaded on the e-portal along with documents stipulated in the Tender documents. Essential
34 8.2 A company can submit only one response. Essential
35 8.3 Bid shall be opened as per schedule indicated on e-portal. The date fixed for opening of bid, if subsequently declared as holiday, revised date of schedule will be notified. However in absence of such notification, the bid will be opening on next working day at same time. Essential
36 8.4 The Competent Authority reserves the right to reject any or all the bids/responses without assigning any reason and the decision of the competent authority of the Accessories Division, Hindustan Aeronautics Limited, Lucknow shall be final and binding. Essential
37 8.5 Bidder would be disqualified if they make false, incorrect, or misleading claims in their Bids. Essential
Terms and Conditions
Unless specifically stated to the contrary, the following conditions apply. Supplier may fill their response in Supplier's Comments and Remarks Column.
Sl RFQ Clauses Supplier‘s Comments
a) Price: It is required to indicate prices against individual items. i) Rates should be quoted both in figures & words. ii)Price should be firm and fixed for Design, Development, Qualification, Certification and Supply of Prototypes for firm requirement mentioned in tender. iii) Please confirm, (as applicable) in your quotation that the price quoted is your lowest price and is the same as you would normally quote to Government Department & other favoured customers. iv) Bidders should indicate Price escalation formula with material & Labour content and Maximum Annual Escalation Cap (in percentage) for the production phase in Price Bid format only.
b) Ourselves being manufacturers, please indicate in the quotation the manufacture discount if any.
2 Price Basis: Price quoted should be on F.O.R. Destination basis, for delivery at HAL Lucknow Stores inclusive of all charges (Packing, Forwarding, Freight ) including transit insurance.
a) Applicablity of the Taxes (GST etc) should be explicity indicated by the bidder in his response either in percentage or in absolute terms. In the absence of this input the offer would be considered all inclusive.
b) GST: As GST comes into effect w.e.f. 1st July 2017, so please mention your GST No. & HSN code in front of the quoted items in bid.
a) Your quotation must be in the unit in which the quantity is indicated in the enquiry. If it is otherwise, conversion data must be furnished.
b) HAL reserves the right to order quantity less than indicated in the enquiry/ quoted for by bidder, at the prices quoted without any reference to the bidder.
c) Bidders should clearly mention whether the prices hold good when the full quantity of enquiry is not ordered and only a part of it. Unless otherwise mentioned, it would be assumed that the rates hold good even when lesser quantities than those enquired of are ordered. Any increase in prices at a later date for ordering lesser quantities will not be agreed to.
5 Specification: Material should be offered strictly conforming to our specifications. The deviation in specification, if any should be clearly indicated by you in the quotation. The samples should also indicate make/type number of material offered and catalogues. Technical literature and samples, wherever necessary, should be enclosed with the quotation.
6 Supply of Samples: Samples submitted for any reasons shall be supplied without charge and freight paid and without any obligation on the Purchaser as regards safe custody. All samples submitted must be clearly labeled with the bidder’s name and address and tender number. If the bidder submits the samples with his tender the same shall not govern the standard of supply except when it has been specifically stated in the Purchase Order that it is accepted instead of any sealed pattern. The sample which is not acceptable shall be sent back on request. Should certified samples be lent to a bidder by HAL the bidder is responsible for the return in perfect order of all certified samples with the labels intact.
7 Tender Due date and offer submission : In case of E-TenderThe tender must be submitted within due date/time on e-portal website only. Response to bid through e-procurement should be uploaded in the e-portal only and the offer received through any other medium (Fax/email/Post etc) will not be considered. Tender will be opened on due date @ 09:00 Hrs (IST)
7.1 HAL reserves the right to reject late or incomplete tender.
8 Bidder is required to send REGRET REPLY, in case the subject item is not covered in bidders range of products.
a) Please indicate approximate net weight of each of the item and gross weight and dimension of the package to enable HAL to determine the mode of dispatch.
b) Our conditions of contract will govern any resultant order arising out of the enquiry (copy on application) and your quotation will be subject to the said conditions.
c) The Harmonized System of tariff nomenclature against the items for which quotation is rendered should be indicated.
d) Manufacturer's name and country of origin of the materials offered must be clearly specified. Complete details and illustrated literature must accompany all quotations.
e) HAL is not bound to accept the lowest or any quotation or assign any reason for non- acceptance and reserves the right of accepting the whole or any part of the quotation or part of the quantity offered and you must supply the same at the rate quoted.
f) Please furnish list of similar equipments supplied in HAL or anywhere in India with customer’s full address, value and telephone/telex etc.(if applicable)
g) Vendor shall not be entitled without HAL’s consent to assign or transfer to a third party all or part of the benefits or obligations under this contract.
h) Any order, resulting from the enquiry, shall be governed by the General Terms and Conditions of Contract of HAL and any party quoting against this enquiry shall be deemed to have read and understood these terms and conditions and to have quoted subject to these terms and conditions.
i) Canvassing by tenderers in any form, including unsolicited letters on tenders submitted or post tender corrections shall render their tenders liable for summary rejection.
j) When counter terms and conditions have been offered by a tenderer, HAL shall not be deemed to be governed by such terms and conditions unless specific written acceptance thereof has been given by HAL.
k) Under no circumstances the goods should be despatched by post parcel. In case goods are despatched by post parcel we shall not be liable to make payment to you.
l) No price or condition and terms, notice of which has not been given against this enquiry by parties submitting quotations, will be considered by HAL, if put forward in subsequent correspondence, after acceptance of orders etc.
m) Disregard of any instructions, may result in your offer being ignored.
n) Bidders should clearly mention whether the prices hold good when the full quantity of enquiry is not ordered but only a part of it. Unless otherwise mentioned, it would be assumed that the rates hold good even when lesser quantities than those enquired of are ordered and HAL reserves the right to order quantity less than indicated in tender without any reference to you. Any increase in prices at a later date for ordering lesser quantities will not be agreed to.
o) HAL or HALs’ representative has the right to verify supplier's premise that product confirms to specific requirements.
10 Please mention invariably in your quotation about the status of your form or company whether: (a) Defense PSU (b) Other PSU (c) SSI (d) Ancilary Unit (e) Large/ Medium Scale (f) Agent (g) Stockist (h) General order supplier (in case of SSI, please indicate your Registration Number and forward copy of valid NSIC Certificate
11 Please mention following details of GSTIN and ECS Bank Account details in your quotation as it is a mandatory requirement.
i GSTIN Number - PLEASE PROVIDE GSTIN NO. OF YOUR COMPANY
ii Status of GSTIN
iii ECS details submitted (Yes/No)
iv If ECS details not submitted, please submit in prescribed format along with quotation
v ALSO PLEASE ENSURE THAT ANTI-PROFITEERING CLAUSE AS PER GST LAW IS COMPLIED i.e. ANY REDUCTION IN RATE OF TAX ON ANY SUPPLY OF GOODS or SERVICES or THE BENEFIT OF INPUT TAX CREDIT SHALL BE PASSED TO THE RECIPIENT BY WAY OF COMMENSURATE REDUCTION IN PRICES.
12 Validity of the Quotation : Price quoted should be net and unless otherwise specified should remain valid for our acceptance for a minimum 180 days from the closing date of enquiry & the materials offered should be kept under provisional reservation for the quotation.
13 Delivery :Deliveries quoted should be firm (or as per the schedule indicated.)
14 Liquidated Damages : In the event of an order, we reserve the right to collect a sum of 0.5% per week of delay or part thereof, subject to a maximum of 10% as our claim-towards liquidated damages on the undelivered part of the order asour claim towars liquidated damages on the undelivered part of the order. This clause will be strictly followed by HAL, therefore your delvery should be firm and definited. In case tenders dont agree for the LD clause the maximum LD amount to the extent not agreed LD value may be loaded for tender evaluation.
15 Terms of Payment: In the event of an order, 100% payment will be made within 30 days after inspection and acceptance at our Stores, by RTGS or any other latest Electronic Payment remittance mode.
16 Mode of Payment: In accordance with our standard practice, payment against any order materializing out of the offer, will be against documents submission through our Bank State Bank of India , Bangalore
17 Bank Charges: All Bank Charges, if any, shall be borne by supplier.
18 Warranty :Warranty shall be covered for 500 flight hours after installation of item on helicopter or 2 years after supply of the unit, whichever occurs earlier.Warranty is after the goods have been taken over by HAL against any defective design, workmanship, materials and non-conformance to intended performance.During warranty period equipment shall be replaced/ repaired free of cost including any to & fro freight/insurance involved.
19 Shelf LIfe: i) Where stores offered have a limited shelf-life, kindly indicate the life involved and confirm that in the event of an order from us, only newly manufactured stores with the maximum possible shelf-life at the time of dispatch will be offered for shipment. In respect of rubber items such as seals etc., having cure date, the item should not have been manufactured earlier than 6 months of dispatch. ii) For such items and bearing, items should have shelf life of minimum 85% at the time of dispatch and should be individually packed/sealed.
20 Inspection :
a) Material on its arrival at our factory will be inspected by our Inspection Department and their decision in the matter will be considered final. HAL shall be at liberty to allow the contractor to re-submit stores in replacement of those rejected material within a time specified by HAL and Transportation charges for the same shall have to be borne by the supplier.
b) Please indicate in your tender, whether stores newly manufactured throughout are offered or whether tender includes in whole or in part reconditioned stores. Where newly manufactured stores are offered and on inspection it is found that reconditioned stores or parts have been used, such stores will be rejected at the contractor risk and expense.
c) In the case of airborne material, the same should be covered by a Airworthiness Certificate countersigned by person/s authorized by Government Airworthiness Certifying Authority or Notarized Airworthiness Affidavit/ Works/ Test Certificate etc, as applicable.
d) HAL PO No., Batch No., Latest issue No., Quantity and Date Of Manufacturing, shall be provided on COC and individual packing label. For shelf life items apart from above Date of manufacturing, date of expiry/storage life shall also be indicated on each along with group.
e) Test certificate with date of manufacture/date of expiry/batch no must be provided along with supply.
f) HAL is AS9100D Certified Company, so all Development/supplies should meet criteria of AS9100D standards
21 Intellectual Property rights (IPR):
a) Bidder agrees that HAL shall be the sole owner of Intellectual Property (IP) generated in the performance of this contract by or on behalf of Bidder with the aid of either funding and/or technical inputs from HAL (herein referred to as 'Foreground IP'). If applicable and to the extant that Bidder sub-contracts performance of any part of the contract, the Bidder shall ensure taht any Foreground IP arising from such work of its sub-contractor/s shall be assigned to HAL absolutely. Bidder hereby assigns and agrees to assign all rights and interest in the Foreground IP to HAL. Bidder shall share with HAL, all documentation necessary for HAL to exercise its rights to Foreground IP. If required by HAL, Bidder shall assist HAL in registering the Foreground IP in favour of HAL. Successful bidder will not directly deal with HAL's customer for these items.
b) Successful bidder shall grant to HAL an irrevocable, non exclusive, world-wide, royalty free license to sell, offer for sale, use, execute, release, disclose and distribute the developed supplies/ services/ products, which may contain Background IP. Background IP shall mean and include all pre-existing inventions and IP necessary for HAL to exercise its rights to Foreground IP.
c) HAL shall have the rights to use the Supplies/Services procured under the contract that may contain any Intellectual Property/Intellectual Property Rights. Bidder shall indemnify and protect at its own cost, HAL in respect of cost/claims/liabilities (including attorney's fees and associated costs of legal proceedings) arising from any violation of Intellectual Property Rights of any third party with respect to Supplies/Services provided by BIdder. If HAL or HAL's customer/s are unable to put to use the Supplies/Services or a portion thereof as a result of violation of the Intellectual Property of any third party, Bidder shall within reasonable time at Bidder's own cost either, i) procure for HAL and HAL's Customer/s the right to continue using the Supply/Service or, ii) replace or modify the Supplies/Services so that it become non-infringing or, iii) Compensate HAL the amoount equivalent to the cost of supplies procured/to be procured, development cst alreday paid to Bidder and damages suffered by HAL arising due to inability to put to use the Supplies/services or a portion thereof.
d) In case the Bidder receives a requirement/request for supply or repair of deliveries of this contract directly from any third party including HAL's customers, such request shall be forwarded to HAL. Intellectual Property for the purpose of this clause includes inventions, discoveries and improvements; know-how, works of authorship, technical data, drawings, specifications, process information, reports and documented information; and computer software (including without limitation, source code, object code, source code listings and object code listings that would enable the software to be reproduced or recreated), topology of integarted circuits, databases or any other such results of Intellectual activity.
22 In case, at any stage HAL requires Transfer of Technology after successful Design, Development, Qualification & Certification of Items, Successful Bidder shall provide all the necessary information, Know-how, Know-why and assistance for Transfer of Technology (including but not limited to documents, data, information, know-how, processes, training etc). in order to enable ADL to successfully establish Manufacturing/ RoH facilities at our premises and validate these Free of Cost. HAL shall have world-wide exclusive License for Manufacturing/ RoH of these items without any royalty payment.
23 Settlement of Disputes and Arbitration: All disputes arising out of the contract shall be settled as per Laws of India/ Rules of Arbitration of Indian Council of Arbitration.vii) The court at Lucknow, India only shall have jurisdiction to deal with and decide any legal matter what so ever arising out of contract.
24 Immunity to Government Of India: It is understood and agreed that the Government of India is not a party to this agreement and has no liabilities, obligations or rights hereunder. It is expressly understood and agreed that HAL is an independent legal entity with power and authority to enter into contracts solely in its own behalf under the applicable Laws of India and General Principles Contract Law. The vendor shall agree, acknowledge and understand that HAL is not an agent, representative or delegate of the Government of India. It is further understood and agreed that the Government of India is not and shall not be liable for any acts, omissions, commissions, breaches or other wrongs arising out of the contract. Accordingly, vendor expressly waives releases and foregoes any and all actions or claims against the Government of India arising out of this contract, not to sue the Government of India as to any manner, claim, and cause of action or thing whatsoever arising out of or under this agreement.
25 Risk Purchases: Please confirm that supplier will supply quality items as per approved sample and also the quantity intended by the concerned Division in full as per terms and conditions of respective orders. In case the Supplier fails to execute the order either in terms of quality or in quantity, HAL reserves the right to procure from elsewhere at the risk and cost of the Supplier and any extra expenditure incurred due to this purchase is payable by the Supplier.
26 Fall Clause:
a) The price charged for the stores supplied under the contract shall be in no event exceed the lowest price at which the contractor sells the stores or offers to sell stores of identical description to any persons/organizations including the purchaser of any department of the Central Govt. or any Dept. of the State Govt. or any statutory undertaking of the Central or State Govt., as the case may be during the period till the performance of the supply order placed and during currency of the contract is completed.
b) If at any time during the said period, the contractor reduces the sales price, sells or offers to sell such stores to any person/organization including the purchaser or any department of Central Govt. or any Dept. of State Govt., or any statutory undertaking of the Central or State Govt., as the case may be at a price lower than the price chargeable under the contract, he shall forthwith notify such reduction/sale or offer to sale to the Hindustan Aeronautics Limited and the price payable under the contract for the stores supplied after the date of coming into force of such reduction or sale or offer to sale shall stand correspondingly reduced.
27 Indian Agent: HAL deals with suppliers directly and not through any agent or firm and supplier shall interact with HAL directly and not through any agent.Seller shall confirm that he has not appointed any agent in India to promote this contract and that no commission etc. Is payable to any such agent in connection with this contract. Seller shall also confirm that he has neither paid nor will pay any commission, fee or any such charges to any agent in connection with the award and execution of this contract. Should it be subsequently proved that such a commission, fees or charge has been paid, contrary to the foregoing, buyer shall be entitled to terminate this contract forthwith. The buyer shall also be entitled to recover from the seller an amount equal to the commission, fees or any such charge proved to have been paid.
28 CONFIDENTIALITY:
a) The Supplier shall hold confidential technical data and information supplied by the Purchaser or on behalf of the Purchaser and shall not reproduce any such technical data or information or divulge the same to any third party without the prior written consent of the Purchaser. The Purchaser shall hold confidential technical data and information supplied by the Supplier or on behalf of the Supplier and shall not reproduce any such technical data or information or divulge the same to any third party without prior written consent of the Supplier except as far as may be necessary for either party to carry out its obligations under this Contract.
b) For the purpose of this Tender/Contract/Agreement, the Bidder/Contractor/Supplier shall not store, copy or disclose HAL’s data and information whether in written, machine readable or other tangible form or disclosed orally, that is of value to HAL. Also, Bidder/ Contractor/Supplier agrees to use HAL’s data only for the purpose under this Tender/Contract/Agreement, restrict disclosure to any other person or entity or third party and shall safeguard the provided data including from cyber security risks etc. Bidder/ Contractor/Supplier should promptly return within 90 days HAL’s data in original media and should not keep HAL;s data, upon expiry of Tender/Contract/Agreement or early termination of Contract/ Agreement and certify that HAL’s data has been deleted permanently. Non-adherence to this confidentiality clause by the Bidder/Contractor/Supplier shall be treated, as a material breach of this Tender/Contract/Agreement. The provision of this clause shall survive and remain in force notwithstanding the termination or expiry of this Contract/Agreement.
29 Bribes and Gifts: Any bribe, commission, gift or advantage given, promised or offered by or on behalf of the contractor or his parties, agent or servant or any one on his or thier behalf to any officer, servant, representative or agent of HAL or person on his or their behalf in relation to the obtaing or to the execution of this or any other contract with HAL shall in addition to any criminal liability which the contractor may incur, subject the contractor to the cancellation of this and all other contracts with HAL and also to payment of any loss or damage resulting from any such cancellation Any question or dispute as to the commission of any offence under the present clause shall be settled by HAL in such manner and on such evidence or information as they may think fit and sufficient and their decision shall be final and conclusive.
29.1 “HAL has not appointed any agent in India or outside India for procurement of any items and deals directly with vendors. In case any individual or firm approaches you posing themselves as authorized agent of HAL, it is requested that you should not entertain such claim and in addition inform immediately to AGM(IMM)-HAL
30 Non Payment of agency comission
a) The seller confirms and declares to the buyer that the seller is the original manufacturer/licensor of the stores referred to in this contract and has not engaged any individual or firm whether Indian or foreign whatsoever, to intercede, facilitate or in any way to recommend to the HAL or any of its functionaries, whether officially or unofficially, the award of the contract to the seller nor has any amount been paid, promised or intended to be paid to any such individual or intended to be paid to any firm in respect of any such intercession, facilitation or recommendation. The seller agrees that if it is established at any time to the satisfaction of the Buyer that the present declaration is in any way incorrect or if at a later stage it is discovered by the Buyer that the seller has engaged any such individual/firm, and paid or intended to pay any amount, gift, reward, fees, commission or consideration to such person, party, firm or institution, whether before off after the signing of this contract, the seller will be liable to fund that amount to Buyer. The seller will also be debarred from entering into any supply contract with the HAL for a minimum period of 5 years. The Buyer will also have a right to consider cancellation of the contract either wholly or in part, without any entitlement or compensation to the seller who shall in such event be liable to refund all payments made by HAL in terms of the contract along with the interest at the rate of 2% per annum above LIBOR rate. The Buyer will also have the right to recover any such amount from any contracts concluded earlier with HAL or Government of India.
b) Please provide a confirmation letter on your company’s letterhead along with offer confirming that seller have not offered and will not offer any promise or give any material or other benefit or paid or payable any agency commission to any inter-mediators in order to obtain in exchange any advantage during the tendering or qualification process or during the execution of the contract.
31 Restrictions under Rule 144 (xi) of the General Financial Rules (GFRs), 2017: As per Dept. of Expenditure OM No.6/18/2019-PPD dated 23rd July, 2020, Bidder has to submit Undertaking along with Bid as per Format at Annexure-B & B1 attached with the tender.
32 Option Clause: The Buyer reserves the right to place orders for additional quantity up to a maximum of 10 to 15% of the originally contracted quantity at the same rate and terms of contract”. The buyer may operate the option clause within original Delivery Period Option clause after original Delivery Period may be exercised with the consent of supplier.
33 EXIT CLAUSE: Exit criteria: The contract/order may be terminated under the following circumstances: i. In the event of unsatisfactory performance by the Seller during the contract period, or any of the information provided by the Seller is found to be untrue, or Seller is found to have attempted to influence any person involved with the contract through unethical means, the contract shall be terminated with 06 month’s advance notice without any financial implication to Buyer. Notwithstanding the foregoing, in cases where it is found that a Seller is engaged in unethical practices, they shall be barred from participating in the future contracts for a period of 02 years. ii. If there is change in Buyer requirement, contract shall be terminated with 06 months advance notice. The liability of Buyer in this case will be agreed mutually. In the event of termination of contract by either party the Seller shall ensure the following: a) IPR’s are transferred to Buyer to enable Buyer to proceed on the work with other Seller. Seller also will render all assistance till the other Seller fully take over the balance work. b) Transfer title and deliver all or any part thereof of the supplies, materials, work-in-progress, finished Products, Tooling, drawings and data produced or acquired by Seller specifically for the Product being terminated. c) Supply of products and its components / spares at least for a period of 10 years from the date of such termination. iii. The Seller is declared bankrupt or becomes insolvent. iv. The delivery of material is delayed due to causes of Force Majeure by more than (06 months). v. Based on the decision of the Arbitration Tribunal.
34 Vendor’s credential: i) Details of Business Establishment- Certificate of incorporation, Memorandum of Association under companies Act 1956/Partnership Deed etc (As applicable). ii) In case of Proprietary Company/Public Partnership Company where firm registration is not mandatory, full address of office and proof thereof- certified from Notary. iii) Copy of PAN and GST registration required
35 Rates should be mentioned only in Price Bid Sheet. Prices if anywhere else in Technical Bid Sheet or in any other document if submitted then offer will be summarily rejected.
36 Technical Bid will be opened on the tender opening date. After technical evaluation, the Price bid of those bidders who are technically accepted will be opened.
37 Tender will be evaluated on Package Basis as per evaluation criteria defiend in Price Bid Sheet.
38 Non-conformities between Figures and Words: In case of non-conformities/errors are observed in responsive tenders between the quoted prices in figures and in words. This situation normally does not arise in case of e-Procurement. This should be taken care of in the manner indicated below: i) If, in the price structure quoted for the required goods, there is discrepancy between the unit price and total price (which is obtained by multiplying the unit price by the quantity), the unit price shall prevail and the total price corrected accordingly; ii) If there is an error in a total corresponding to the addition or subtraction of sub-totals, the sub-totals shall prevail and the total shall be corrected; and iii) If there is a discrepancy between words and figures, the amount in words shall prevail. Such a discrepancy in an offer should be conveyed to the bidder asking him to respond by a target date and if the bidder does not agree to HAL's observation, then the bid is liable to be rejected.
39 HAL is registered on TReDS platform (Trade Receivables Discounting Systems) as being promoted by GoI directive. It is suggested that all the MSME vendors to take note of the same and consider for registerign on any TReDS platform and avail the platform services which is being made available as per the Government initiative.
40 Contact details for general correspondence except for submission of quotation: Ms.Nidhi Sahai ,Senior Manager (IMM) E-mail Id : [email protected] Fax No. 0522 2340347 Phone: 0091 522 231 4323, 0091 522 231 4000, Extn: 4323
41 Bidder's Company Name and Signatory
HINDUSTAN AERONAUTICS LIMITED
(A Govt. of India Enterprise Under Ministry of Defence)
Accessories Division, Ayodhya Road, Lucknow-226016, UP - INDIA
PRICE DETAIL TO BE MENTIONED IN THIS SHEET ONLY AND NOWHERE ELSE IN TENDER.
Note: Rates to be mentioned in Numeric Value and Taxes & Charges if any to be mentioned in Percentage
Temder/Enquiry No. : HAL/ADL/INDG/INST/ACTUATOR/BUSHBEARING/2 PRICE BID
Supplier /Company Name Supplier's Offer Ref & Date:
(A) (B) (C) (D) (E) (F) (G) (H) (I) (J) (K) (L) Internal Reference
Sl. No. Part No. Description and Detail Delivery Schedule Qty (Nos) Offered Qty (Nos) Unit Price without any GST orTaxes (INR) Total Price without any GST or Taxes (INR) Taxes (GST/ IGST etc) EXTRA in % Any other Charges(Fixed Cost etc.) Total Amount Including Taxes and all Remarks (Mention detail of any other charges/fixed cost etc if quoted) Total Amount Including Taxes and all
1 (a) BUSH BEARING (Refer Annexure A for Technical Specification Detail ) Part No. 1920055002(LD) BUSH BEARING (Prototype Qty for Design, Development, Qualification & Certification phase) Within 6 months from date of order for Design, Development, Qualification & Certification phase 100
1 (b) Part No. 1920050003(LD) BUSH BEARING DIA 3 (Prototype Qty for Design, Development, Qualification & Certification phase) 100
1 (c) Part No. 1920050007(LD) BUSH BEARING (Prototype Qty for Design, Development, Qualification & Certification phase) 100
1 (d) Anticipated requirement for Production phase (after successful Design, Development, Qualification & Certification) For Part No. 1920055002(LD) 132
1 (e) Anticipated requirement for Production phase (after successful Design, Development, Qualification & Certification) For Part No. 1920050003(LD) 146
1 (f) Anticipated requirement for Production phase (after successful Design, Development, Qualification & Certification) For Part No. 1920050007(LD) 210
TOTAL (AS PER L-1 EVALUATION CRITERIA)
i) Material Test report and Inspection test report to be included with each item with each supply
ii) 05 quantity of aech type pf part (Out of 100 quantity as in 1(a), 1(b) & 1(c) will be required first for qualification purpose, remaining qunatity will be required after sucessful qulaifiaction).
iii) Items are required for Development and Ordering to be processed(1(a), 1(b) & 1(c) without Anticipated requirement quantity(1(d),1(e),1(f) for Production Phase. After successful development of item after review Production Phase requirement processing will be done separately. Bidder must submit offer for Anticipated requirement also. Please confirm
iv) L-1 Evaluation Criteria on package basis Total Cost for Prototype Qty +Total Cost for tentative production phase units+ Taxes and any other chargesApplicable etc (i.e.Total Amount Including Taxes and all for a+b+c+d+e+f)
1. Supplier is requested to fill information in the required cells which are highlighted in COLOR
2. Kindly note that HAL does not entertain Fax/ Email quotations unless otherwise specifically requested by us in our RFQ.
3. For general correspondence other than submission of quotations on portal kindly make use of the (E-mailID): [email protected]
4. Evaluation will be on Package basis . Therefore vendor has to quote for all lines . Calculation for evaluation of cost will be considered in totality. 5. Lowest one (L-1) Bidder will be decided on Grand "Total cost of Protype unit, Total cost of unit for tentative production phase qty + Taxes & Duties applicable on (Development cost, prototype cost and cost of production phase qtys) and any other charges (fixed charges etc)" and it will be on package basis i.e. for all lines.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
AnnexureKTechnicalBid.xls
TENDER_DOCUMENT • 0.04 MB
ImportantInstructionWebTender.pdf
TENDER_DOCUMENT • 0.07 MB
InvitationToTender.pdf
TENDER_DOCUMENT • 0.64 MB
AnnexureATechnicalSpecification.pdf
TENDER_DOCUMENT • 0.61 MB
AnnexureBTechnicalComplianceMatrix.xls
TENDER_DOCUMENT • 0.04 MB
AnnexureCTermsCondition.xls
TENDER_DOCUMENT • 0.06 MB
AnnexureDPriceBid.xls
TENDER_DOCUMENT • 0.04 MB
AnnexureEPBG.pdf
TENDER_DOCUMENT • 0.61 MB
AnnexureFECSFORMAT.docx
TENDER_DOCUMENT • 0.01 MB
AnnexureHSelfCertification.pdf
TENDER_DOCUMENT • 0.19 MB
AnnexureIGFR144Declaration.pdf
TENDER_DOCUMENT • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .