SPECIAL REPAIR TO BLDG NO. TC-16 (OR MD ACCN) AND PROVN OF BADMINTON COURT AT HEMA LINE AND STREET LIGHTS AT VARIOUS LOCATION AT MCTE UNDER GE (MCTE) MHOW

Amount

Demolition of stone slabs and tiles of any description or thickness in floors/ walls laid bedded and pointed in any mortar, complete all as specified and directed.

Dismantling mild steel work of any description from any position and height, complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semi corrugated etc), sheets in roof covering from any position, complete all as specified and directed.

Dismantling/ wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/ slabs, complete all as specified and directed.

Taking down Cement Plaster of any description on Brick or Stone walls or Concrete Surfaces including Racking out Joints, hacking for Key, scrubbing down with Water, etc. complete removal of debris outside MoD land, complete all as specified and directed.

Demolition of brickwork built in cement mortar or cement lime mortar including all quoins arches pillars etc, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) n. exc 1.50 Sqm each, complete all as specified and directed.

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5sqm but n. exc 4 Sqm each, complete all as specified and directed.

M&L for Machine cut mirror polished kota stone slab flooring with rounded edge 18-20mm thick over cement screed bed (1:6) 15mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, complete all as specified and directed.

Cutting and mirror polishing of exixting kota stone flooring, complete all as specified and directed.

M&L for brick work with modular size kiln well burnt bricks sub-class 'B', straight or curved on plan not exc 6m mean radius, built in CM 1:6, complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long and joints shall be filled with the mixture of bitumen and sand in (1:3) by weight, complete all as specified and directed.

M&L for plain cement concrete 1:4:8, type D-2, using 40mm graded stone aggregate as in sub base of floors etc, complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelam PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing with prelam sheet, complete all as specified and directed.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing and as directed.

S&F Pressed steel door frame for single door, size 125 x 65 x 1mm with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfasts (size 25mm x 3mm) of length 30 cm) etc. including Cutting holes in brick walls built in cement mortor for inserting holdfasts and making good dismantled portion in cement mortor 1:3 or including cement concrete 1:2:4 Type B-1, depth of embedded portion of holdfasts exc. Half brick but not exc. One brick from the face of the jamb intl the wall complete all as specified and directed.

S&F Pressed steel door frame for single door, size 105 x 60 x 1mm with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfast (size 25mm x 3mm) of length 30 cm) etc. including Cutting holes in brick walls built in cement mortor for inserting holdfasts and making good dismantled portion in cement mortor 1:3 or including cement concrete 1:2:4 Type B-1, depth of embedded portion of holdfasts exc. Half brick but not exc. One brick from the face of the jamb intl the wall complete all as specified and directed.

S&F 35mm thick second class hard wood rail and style plain framed factory made panelled shutter (two panel) with lock rail and panel of 12mm BWP commerical ply. The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

S & F 35mm thick, second class hard wood, factory made, glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc divided into squares with rails and styles including cut and mitered beards for securing wire cloth etc. the size of members as specified in SSR-2009, Part I clause No 8.20 (a) complete all as specified and directed.

Preparation of new surface of wood and wood based materials of any description or girth not otherwise described and treated two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Providing and fixing pre painted steel sliding window Eco Series 3-Track, 2 glass panel and 1SS mesh panel sliding window including grill fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (Base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 GM/Sq.mtr) with total coated thickness of 0.58mm. Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. Section for external frame should be of 107 x 44mm, Section for shutter should be of 35 x 49mm. Section of mesh should be of 35 x 49mm.The windows should be paneled with 5mm thick plain float glass. Corner bracket for internal and external frame made of glass filled nylon. Gaskets are to be made of Ethyl Propylene Diamine Monomer (EPDM). The sections are to be cut to length, joined and assembled by means of corner bracket. The above frames should be fixed to the concrete/ masonry walls by means of self expanding screws, including supply and fixing of MS grill 10mm solid square bare @ 150mm centre to centre for horizontal direction and two 10mm solid square bar in vertical direction alongwith all round the frame using 30mm x 3mm MS flat with necessary welding and fixing anchorage and making good the adjacent sides of jambs of window i.e, plastering in CM 1:4, complete all as specified and directed.

Providing and fixing fixed Eco Series louvers fabricated from Roll formed sections made of galvanized Steel colour coated/ powder coated (base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 grams/Sqm) including grills, with thickness of 0.58mm coated sections to be primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick, section for external frame 33 x 58mm, glass holding flanges made of polypropylene, sections are to be cut to length, mitre joined with corner bracket. The above frames should be fixed to the concrete/ masonry walls by means of self expanding screws incl window glass 4mm thick & making good the adjscent sides of jambs of ventilators by plastering in CM (1:4), complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on internal face of wall, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for Preparation of new surface of wall and applying two coats of oil bound distemper over a coat of chalk whiting primer, complete all as specified and directed.

M&L for complete removal of existing treatment of walls and applying two coats of distemper oil emulsion over a coat of primer over and including one coat of wall care putty after preparation of surface, complete all as specified & directed by Engr-in-Charge.

M&L for new plastered surfaces of wall, pillasters, cornices etc precoat treatment apply two coats of Anti fungal weather coat acrylic emulsion paint over a coat of primer (X2) over and including one coat of wall care acrylic putty, complete all as specified and directed. Note :- (a) Each stage i.e preparation of surfaces, application of primer, application of first coat. Application of second coat will be got passed from Engr-in-Charge (b) Written Warranty for four years or as per manufacturer's instructions, whichever is more is required to be furnished by contractor for this item.

Material and labour for complete removal of old decorated plastered surfaces of wall, pillasters, cornices etc by brooming down or steel wire brushing scrapping down and washing with water after completion of precoat treatment apply two coats of Anti fungal weather coat aacrylic emulsion paint over a coat of primer (X2) over and including one coat of wall care acrylic putty, complete all as specified and directed. Note :- (a) Each stage i.e preparation of surfaces,application of primer,application of first coat. Application of second coat will be got passed from Engr-in-Charge (b) Written Warranty for four years or as per manufacturer's instructions, whichever is more is required to be furnished by contractor for this item.

M&L for Preparation of old painted surface of Wood of any description and applying one coat of synthetic enamel paint over 10cm width or girth, complete all as specified and directed.

M&L for Preparation of old painted surface of Steel of any description and applying one coat of synthetic enamel paint over 10cm width or girth, complete all as specified and directed.

M&L for Non skid ceramic tiles coloured, 7 to 8mm thick (Square/ rectangular) area of each tile exceeding 0.11 Sqm but n. exc 0.36 Sqm, over & including 20mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles, complete all as specified and directed.

M&L for joint free coloured glazed ceramic tiles (colour as approved laid in pattern as approved by GE) size 300 x 450mm x 7mm thick on vertical surfaces such as dados and risers to step etc, set and jointed in neat cement slurry and pointed in coloured cement to match the tiles including 10mm thick rendering in CM 1:4.

M & L for Granite stone (of any type) slabs 20mm thick machine cut over and including Screed bed or bedding layer of mortar 10mm thick in cement mortar 1: 6 bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting, polishing, rounding to edge, complete all as specified and directed.

Taking up or down steel tubing and connections for bore of tube 15mm, complete all as specified and directed.

Taking up or down steel tubing and connections for bore of tube 20mm, complete all as specified and directed.

S&F of 20mm bore HDPE pipe of pressure 6 kgf/Sqcm, with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

S&F of 15mm bore HDPE pipe of pressure 6 kgf/Sqcm, with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortar in 1:4, cutting depth not exc 10 cm, complete all as specified and directed.

S&F in repair vitreous china squatting pan, white, Orissa pattern, size 580 x 440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron trap, connected to outgoing pipe and flush pipe, making good floor portion to match with the existing surface of floor, complete all as specified and directed.

S & F in repair PVC low level flushing cistern 10 ltrs capacity, white with all fitting and fixtures including brackets and 32mm bore PVC flush pipe, complete all as specified and directed.

S & F in repair bib tap cast copper alloy with chromium plated crutch or butterfly handle, screwed down, screwed for iron pipes 15mm bore, complete all as specified and directed.

S&F in repair vitreous china, white, wash hand basin, flat back size 550 x 400mm 'including MS brackets including waste coupling, including cutting for and pinning in, including waste pipe complete all as specified and directed.

S & F in repair Pillar tap 15mm bore, cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with long shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

S & F in repair stop valves 15mm bore, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed, complete all as specified and directed.

S & F in repairs Brass Chromium plated two way angle cock/ two way bib cock 15mm bore complete all as specified and directed.

S & F in repair Brass chromium plated shower rose 125mm size with swivel joints, complete all as specified and directed.

S & F in repair Wall mixture CP hot & cold, 15mm bore, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed.

S & F in repair Stainless Steel Wall Mount Soap Case, fixed to wall with screws and PVC/ wooden cleats, complete all as specified and directed.

S & F in repair sheet glass shelf assembly of approved make, consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S & F in repair PVC body bathroom cabinet with mirror fancy type made out of 5.5mm thick mirror of size 350 x 450mm, complete all as specified and directed.

S & F in repair PVC connections, 450mm long with brass CP/ PTMT nuts suitable for connecting 15mm bore pipes, superior quality, complete all as specified and directed.

S&F in repair kitchen sink stainless steel with draining board made of 1mm thick sheet with plugs,washer and waste including sink coupling, including bedding in cement mortar or dwarf wall or cantiliver brackets and connectinng unions to pipe overall size 915 x 460mm, bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F in repair Stainless steel plate rack of size 750mm x 900mm x 250mm including fixed with rawl plug and screws on walls, complete all as specified and directed.

Dismantling water tanks and removing to store exc 250 & n. exc 1000 litres capacity, complete all as specified and directed.

S & F Rotational moulded polyethlene water storage tanks of capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I and as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt etc and hoisting if required and re-fixing in position exc 500 & n. exc 1000 litres capacity, complete all as specified and directed.

S&F in repair 20mm dia Ball valves, of PTMT high pressure, with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 15 to 25mm - 142 to 455 gms), complete all as specified and directed.

S&F in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwd both ends or iron pipe and fixed, complete all as specified and directed.

S & F in repair curtain rails 20mm dia, decorative type, anodised aluminium alloy powder coated with either side fixing brackets including J-hook and side holder bracket fancy type (Lattu), complete all as specified and directed.

S&F stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm fixed with wooden beeds, complete all as specified and directed.

S&F Butt hinges 100mm mild steel cold rolled, medium weight, complete all as specified and directed.

S&F 150mm long aluminium handles, cast type anodized, complete all as specified and as directed.

S&F 200mm long aluminium, anodized barrel tower bolts of extruded section, complete all as specified and directed.

S&F 300mm aluminium alloy, anodized, sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed.

S&F door spring with 300mm mild steel rat rail rod pattern of standard quality including roller and roller plate complete Helical spring), complete all as specified and directed.

S&F of Mild steel work as in band, strap, hold fast, cleat, hook, hinges, base tie for door frame, support or stay for rain water pipe etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

Cutting holes in stone/ brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1;2:4 type B1 exceeding half brick but not exceeding one brick, complete all as specified and directed.

S&F Mild Steel work with hollow MS tubular section square or rectangular section as rafter/ purlin including necessary welding bolting complete with using ERW or induction butt welded tubes confirming to relevant I.S. Fe 410 -W (Gde?E- 250 quality A, complete all as specified and directed

M&L for Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tesile strength of 550 Mpa as in roof covering to wall, fixed with self tapping screws, complete all as specified and directed.

M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, and eves board fixed with self tapping screws complete all as specified and as directed.

M&L for two coat of synthetic enamel paint over a coat of red oxide primer over newely untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described etc complete all as specified and directed.

Providing and fixing in true horizontal level 600mm x 600mm, false ceiling system (E Board) hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38mm, having 0.25mm gauge at every 1200mm centre to centre maximum and rotary stitched cross tee of size 24 x 38mm having 0.25mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25mm gauge at 1200mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The abovegrid is suspended at every 1200mm c/c in both directions using 2.0mm thick pre-straightened GI wire. laying ceiling tiles of approvde make and specification, of size 600mm x 60mm x 6mm, complete all as specified and directed.

S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to floor/ walls etc complete all as specified and directed.

S&F repair PVC (SWR) bends 110mm dia any radius with access door, complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) 110mm dia equal or unequal with access door, complete all as specified and directed.

S&F in repair PVC (SWR) vent cowl 110mm bore, complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls etc complete all as specified and directed.

S&F repair PVC (SWR) bends 75mm dia any radius with access door, complete all as specified and directed.

S&F in repair for PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc complete, complete all as specified and directed.

M&L for 75mm thick PCC, type D2 (1:4:8) using 40mm graded stone aggt in foundation, fillings and mass concrete, complete all as specified and directed.

S&F stainless steel shelf closing hinges 75mm size for PVC door shutters complete all as specified and directed

S&F 50 x 15mm size magnet door catcher for closing for PVC door shutter complete all as specifid and directed.

S&F 100mm long, mild steel matt/ glossy finish handle complete all as specfied and directed.

S&F in repair mild steel framed work such as framed and hung as gates ornamental and intricate design, including pintle hinges, stops,hand-made sliding bolts, etc grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framed work and similar works conforming to Fe-290 Gd E-165, complete all as specified and directed.

Excavation over areas, not. exc 1.5 m deep and getting out in any type of soil complete all as specified and directed by Engr-in-charge.

M&L for moorum/ red bajri filling in floors or pavings, laid in layers n. exc 15cm thick, spread, levelled and rammed including watering, complete all as specified and directed.

M&L for PCC 1:4:8, type D2 (using 40mm graded crushed stone aggregate) as in foundation filling, mass concrete and base foundation of the pole, complete all as specified and directed.

M&L for 75mm thick PCC 1:2:4, type B-1 using 20mm graded stone aggt in floors and finishing the surface even and fair without using extra cement and finishing the exposed edge fair and rounding or chamfering where required, complete all as specified and as directed.

S&F rolled mild steel joist, channel, angle, or tee section fixed independently without connecting plates etc (cut to ordinary length i.e within 20mm of the length indicated) of grade Fe 410-W (Gde E-250) quality-A, complete all as specified and directed.

M&L for Preparation of new concrete surface of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer, complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on concrete surface of any description not exc 10cm width or girth, when unconnected with other painting or when painted in different tint, complete all as specified and directed.

S&F glass dividing strips of 3mm thick and 38mm wide and inserted in position conform to design, complete all as specified and directed.

M&L for preparation of new steel surface of any description, over 10cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete with fittings such as switches, sockets, ceiling rose, light fittings etc, and making good the disturbed surface of walls and floors etc, complete all as specified and directed.

Taking down carefully copper/ aluminium sub-main wiring any type and making good the disturbed surface of walls and floors etc, complete all as specified and as directed.

Taking down carefully MCB DBs/ sheet metal earth plug socket any size and any type including MCBs any type and making good the disturbed surface of walls and floors etc complete all as specified and directed.

Taking down existing celing fan/ Exhaust fan and refixing the same replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc and writting the MES Number with synthetic enamel paint complete all as specified and directed.

Taking down existing geyser any size in position and re-fixing the same after B/R work including painting of the same with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter, with and including providing three core flexible copper cable for connection from ceiling rose/ connector complete all as specified and directed by Engr-in-Charge.

Taking down existing single phase electric energy meter of any capacity after disconnecting all necessary electrical connections and re-fixing the same inside the panel complete all as specified and directed.

M & L for Point wiring with 1.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete, including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dolly including modular flush box with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches and blank plates of suitable size all fittings and accessories and making good disturbed surface of walls and floors etc. complete all as specified and directed for the following:- Note:- Make of modular GI box should be same with switch/ socket.

One light/ fan/ bell point controlled by one switch.

One 5 Amps socket out let point controlled by one switch on same board with other switches.

One 5 Amps socket out let point on independent board controlled by one switch.

All as per Srl item No.93.00 here in before but using PVC insulated unsheathed 2.5 Sqmm cross sectional area cable for phase/ neutral & for earth 2.5 Sqmm green PVC insulated cable for 15 Amps socket point on independent board controlled by one switch complete all as specified and directed.

S & F for Modular Switch, single pole, one way, and 5/6 Amp single module complete all as specified and directed.

S & F for Modular Switch, single pole, one way, and 15/16 Amp single module complete all as specified and directed.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module complete all as specified and directed.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module complete all as specified and directed.

S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and directed.

S & F for lamp holder, PVC/ Polycarbonate type with back plate suitabl for batten/ slanting fittings complete all as specified and directed.

S & F for for Bell push modular 6 Amps single module, complete all as specified and directed.

S&F Bell, ding dong type, AC 230 Volts, single pole, complete all as specified and directed.

S&F LED bulb of 7 watt, Of base B-22, suitable for fixing in lamp holder, complete all as specified and directed.

S&F in repair Inverter LED batten 20 watt with squre profile and polycarbonate channel. Lithium lon battery with bcharging time 8 hourse 10 hourse and back up time upto 3 hours. with extruded environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories, complete all as specified and directed.

S&F in repair LED tube light fittings 1 x 9/10 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square boxes, complete all as specified and directed.

S&F in repair Surface/ Recessed mounted LED panel 18 w, slim, compact Square LED panel of 18 W plastic body with premium diffuser to ensure glare free & even distribution of light, complete all as specified and directed.

S&F in repair LED Bulk Head luminaire 13.5 W, pressure die cast housing with IP65 protection complete with electric connection & all necessary fixing arrangement, complete all as specified and directed.

Supply & fixing metallic exhaust fan AC single phase 230/ 240 V of size 300mm sweep with louver including cutting the existing wall for making a hole of appropriate size for fixing the exhaust fan and making good the disturbed surface complete duly connection with copper wire etc complete including taking down of old exhaust fan and deposit to E/M Store in safe custody, complete all as specified and directed.

Supply and fixing ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor. with all connected accessories and electrical connections from ceiling rose to fan teriminal including writting the MES Number with synthetic enamel paint including taking down of old ceiling fan and deposit to E/M Store in safe custody, complete all as specified and directed.

S & F in repair for Energy saving new generation environmental friendly long life versatile LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including necessary mounting arrangements and provision of 2.5 Sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting and necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed.

M&L for Sub main wiring in repairs with two runs of single core PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25mm dia including one run of PVC insulated unsheathed 4.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall complete all as specified and directed. Note:- Two runs of 6 Sqmm cable, one run of 6.00 Sqmm cable and one run of PVC conduit will be measured as one unit.

M&L for Sub main wiring in repairs with two runs of single core FR PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25mm dia including one run of PVC insulated unsheathed 2.5 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall complete all as specified and directed. Note:- Two runs of 4.00 Sqmm cable, one run of 2.50 Sqmm cable and one run of PVC conduit will be measured as one unit.

S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall, complete all as specified and directed.

S & F in repair MCB SPN 6 to 32 Amps 10 KA, 'C' series including connection with suitable size aluminium/ copper lugs, complete all as specified and directed.

S&F in repair MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' series including connection with suitable size aluminium/ copper lugs, complete all as specified and directed.

Sppply & Laying XLPE insulated, armoured, electric cable of size 16 Sqmm 4 core with aluminium conductor, 1100 volts grade, laid in trenches, fixed on poles/ walls or passing through pipes including provision of necessary lugs and glands & making necessary connection including taking down old unservicable cable of any core complete all as specified and directed.

Supply and fixing GI pipe light grade 50mm dia in short lengths, to walls/ poles/ pillars including cutting, chasing and fixing one end on walls/ pillars/ in ground for garden light fittings/ gate light etc, complete all as specified and directed.

Excavation in trenches, in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc and getting out in any type of soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M & L for clean and dry sand (un-washed) in trenches incl spreading and levelling for cushioning of UG cable complete all as specified and directed. Note:- Punned thickness of sand shall be measured.

M & L for brick size sub class ‘B’ (modular size), laid flat, dry, laid in trenches along the length of cable transvarsally with width equal to length of brick for protection of cable, complete all as specified and directed.

Supply & fixing plastic body exhaust fan, AC single phase 230/ 240 V of size 200mm sweep with louver, white in colour including cutting of wall and duly connection with copper wire from ceiling rose etc including taking down of old exhaust fan and deposit to E/M Store in safe custody, complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate 600 x 600 x 6mm thick buried directly in ground (Earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanised Iron Wire of size 4 Sqmm as earthing lead by means of bolts, nuts, cheek nut and washers of galvanised iron or steel besides at all joints as shown in Electrical Plate No-3 of SSR Part-I and including excavation and earth work GI pipe 20mm dia light grade protection pipe and including chorcoal filling common salt, PCC 1:3:6 type CI using 20mm graded stone aggregate chamber and MS angle iron frame 40 x 40 x 6mm and RCC cover 40mm thick (1:2:4) type B-1 using 20mm dia graded stone aggregate reinforced with 6mm dia round bars @ 75mm c/c both ways with MS handle 12mm dia, CI funnel and wire mesh 20mm dia GI pipe medium grade for watering and connected to earth Test point Including testing including taking down old earthing, complete all as specified and directed.

Supply, installation, commissioning and testing indoor type LT wall mounting Panel board of minimum size 0.95m (hight) x 0.90 m (breath) x 0.30 m (depth) factory made CPRI approved panel weather, dust & vermin proof indoore, double door, front openable, incuding four compartment for fixing of 04 No's single phase meter and MCB and providing glass view for reading of meter and providing rubber/ PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/ sleeves with maintained the colour code and copper strip/ wire busbar of suitable size to MCCB input and MCCB/ MCB out put of suitable length for connection of cable from main busbar, made out of 2mm thick mild steel CRCA sheet with suitable size angle iron supporting frame incuding applying two coats of powder coated paint over a coat of red oxide zinc chrome primer 415/440 volts grade including complete internal wiring with 4 Sqmm copper wire and connections of all outgoing/ directed existing cable of any size and removing of old unsv panel complete all as directed by Engineer-in-Charge and provision of the following:- BUSBAR - (a) Copper strip busbar of size 25 x 5mm wrapped with PVC sleeves with maintained the colore code and provision of making holes with copper nuts, bolts & washer for cable connection including hydrograpic insulatore with nuts & bolts at both ends - 05 Nos.

Supply and fixing LED street light fittings lumanaries 90 watt LED with lens, pressure die cast epoxy powder coated aluminium housing with efficient designed heat shrink with heat resistant toughned glass with frame fixed with SS Screws suitable for fixing in existing poles, with protection IP-66, power factor not less than 0.95, surge 5KV, total harmonic distortion THD is < 10% lumen not less than 100 lumen/ watts complete all as specified and directed.

Excavation over areas, exc 1.5 m deep and getting out in any type of soil, complete all as specified and directed.

S&F GI tubing, light grade, 50mm bore pipe laid in trenches/ duct or in road crossing or fixed to wall/ poles for protection of cable, complete all as specified and directed.

S&F GI tubing, light grade, 40mm bore pipe laid in trenches/ duct or in road crossing or fixed to wall/ poles for protection of cable, complete all as specified and directed.

Supply & Laying XLPE insulated, armoured, electric cable of size 16 Sqmm 4 core with aluminium conductor, 1100 volts grade, laid in trenches, fixed on poles/ walls or passing through pipes including provision of necessary lugs and glands & making necessary connection complete all as specified and directed.

Supply and fixing sheet moulding compound (SMC) junction box, suitable for terminating 2 Nos 4 x 10/16 Sqmm UG cable, including of one in Nos MCB SP 10A, 240 volts, AC, 50 Hz, including cable glandes-2 Nos, 4 Nos of Aluminium bus bar with 3 Nos holes for cable connection, two way connector 1 No, complete all as specified and directed.

Cutting the existing bituminuos road for passing of UG Cable in road crossing and making good the disturbed surface of road to its original specification complete all as specified and directed.

S&F of Automatic Street Light control switch for single phase load of 5 KW, using Infrared Sensor based NATURE SWITCH for automatic switching of street light. Nature Switch operation should be based on Natural Light Lux level. Required illuminance level for switching ON is ≤ 30 Lux and for switching OFF ≥ 10 Lux. The sensor should also have part night operation facility of min. 4 hrs to max. 12 hrs. The Sensor along with 03 Nos contactors each of 20 to 25 Amps capacity, Incoming MCBs and Outgoing MCBs of 20-25 Amps (03 Nos) and auto/manual operation (Senser by Pass), size of circuit wiring should be multistranded FRLSH min size of 10 Sqmm should be enclosed in a pole/ wall mounted enclosure made of rust proof, Electric shock Proof, Termite proof and FRLSH grade SMC Junction box conforming to IP54, complete all as specified and directed.

M&L for wiring with 1.5 Sqmm 2 runs of single core multistrand PVC insulated, unsheathed cable with 1 x 1.5 Sqmm earth wire conforming to IS - 694, 1100 volts with copper conductor drawn in and including 20mm dia or higher, non metalic PVC grey conduit with all accessories such as Tees, Elbows, Junction box, Reducers etc as required and connecting to existing main switch board/ distribution board to fittings and testing on completion, complete all as specified and as directed. Note:- 2 runs of 1.5 Sqmm with 1x1.5 sqmm earth wire cable and conduit will be measured as one unit i.e. 1 RM.

M&L for steel tubular swaged poles complete with MS base plate, finial taper plug, bolts, nuts & screws type 410, SP-31 (9 mtrs long) swan neck type, erected to truely vertical position, painting externaly embedded portion in PCC with black bitumenous paint and externally exposed to view portion with aluminium paint in two coats, making five alternate strips 30cm wide with black and yellow paint in two coats, marking MES number with black paint complete all as specified and directed. (Note : Excavation and PCC will be measured and paid separately under respective items).

M&L for PCC 1:3:6, type C2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass conrete for poles, stays etc all as directed and as specified.

M & L for PCC 1:2:4 type B1 using (20mm graded crushed stone aggregate) as in coping of poles including necessary form work and finishing exposed surfaces complete all as specified and directed.

M/S UnitedConstruction (BID ID -3424420)

AGARWAL BUILDERS (BID ID -3425002)

r.s.jain & sons (BID ID -3425724)