SPECIAL REPAIRS TO CONVENTIONAL ELECTRIC METERS INTO POST PAID ELECTRIC AUTO METERING IN CIV MD ACCN, SINGLE/ MARRIED JCOs / OR ACCN, SQ AND OFFRS BUNGALOW INCLUDING CONNECTED WORKS AT DSSC WELLINGTON

Amount

Taking down energy meter fixed in panels of any capacity after carefully disconnecting electrical connections all as specified and as directed by Engr-in-Charge. Note:- Quoted rate shall deemed to be inclusive of following parameters:- (a) Meter reading record shall be submitted before and after replacement duly signed by the contractor rep and MES rep. (b) Old meters should be handed over to MES store. (c) Any rejoining of wires /cables shall be done using suitable ferrule /cable connectors after removal of meter. (d) The cost of making good disturbed surfaces & matching to the existing surface is deemed to be included in the unit quoted rates.

Supply, install, testing & commissioning of Microprocessor based single phase tamper proof electronic static energy meter in panels, surface mount type and of rating 230 Volts, 50 HZ, of range 10-60 Amps, confirming to IS 13779 with LED display and parameters like Voltage, Current, Frequency, Power, Powerfactor, KWh/KVA/KVAh, default /in built dual source, inbuilt LoRa Communication suitable for outdoor LoRa data accumulator and also compatible to GPRS communication for online energy monitoring / billing system, with disconnection /reconnection through remote software / data export to ERP complete all as specified and as directed by Engr-in-Charge. Make : Elmeasure, Cat No : PE5121 or techno commercially equivalent in L&T /Secure Meters/Jaipuria Meters/Havells.

Note: (a) Quoted rate is deemed to be inclusive of linking each meter with the existing software (Nodal Charges) Elnet V5 at power house /BSO Office and External Antenna required for communication with outdoor LoRa Accumulator. (b) Arial distance between the quarters and the building at which the server is installed, is within 3 KM. (c) The meter warranty should be 2 years, service warranty should be 5 years with life time service support. (d) The software should be capable of sending automatically email & sms of billing information to the users /occupants. (e) The complete work of installation, testing, commissioning & software enabling for bill generation as per the requirement of GE /Engr-in-Charge is to be got executed by the OEM or his authorized channel partner only. (f) Any items missed out in the specifications but technically required for the satisfactory performance of the meter is deemed to be included in the unit quoted rates.

Supply, install, testing & commissioning of microprocessor based three phase tamper proof electronic static energy meter in panels ,surface mount type and of rating 230 Volts, 50 Hz, of range 10-60 Amps, confirming to IS 13779 with LED display and parameters like Voltage, Current, Frequency, Power, Powerfactor, KWh/KVA/KVAh, default /in built dual source, inbuilt LoRa communication suitable for outdoor LoRa data accumulator and also compatible to GPRS communication for online energy monitoring / billing system, with disconnection /reconnection through remote software / data export to ERP complete all as specified and as directed by Engr-in-Charge. Make : Elmeasure, Cat No: PE5120 or techno commercially equivalent in L&T /Secure Meters/Jaipuria Meters/Havells.

Note: (a) Quoted rate is deemed to be inclusive of linking each meter with the existing software (Nodal Charges) Elnet V5 at Power House and External Antenna required for communication with outdoor LoRa Accumulator. (b) Arial distance between the quarters and the building at which the server is installed, is within 3 KM. (c) The meter warranty should be 2 years, service warranty should be 5 years with life time service support. (d) The software should be capable of sending automatically email & sms of billing information to the users /occupants. (e) The complete work of installation, testing,commissioning & software enabling for bill generation as per the requirement of GE/Engr-in-Charge is to be got executed by the OEM or his authorized channel partner only. (f) Any items missed out in the specifications but technically required for the satisfactory performance of the meter is deemed to be included in the unit quoted rates.

Supply, install, commissioning & testing of Outdoor LoRa accumulator for long range communication suitable for communicating with postpaid meter with LoRa communication protocol and the data transfer to the existing Elmeasure Elnet V5 Software complete all as specified and as directed by Engr-in-Charge. Make : EL Measure or techno commercially equivalent in L&T /Secure Meters/Jaipuria Meters/Havells. Note: (a)The cost of pole /fixing /mounting arrangement on which the accumulator to be installed and SMPS power supply is deemed to be included in the unit quoted rates. (b)The complete work of installation, testing, commissioning & software linking should be as per the requirement of GE/Engr-in-Charge to be got executed by the OEM or his authorized channel partner only. (c) The accumulator should communicate to the existing Elnet V5 software installed at BSO Office at Gorkha Hill. (d) Any item missed in the specification but technically required for satisfactory working of the device is deemed to be included in the unit quoted rates.

Supply, install, testing and commissioning of Elnet 5, a web based software version for 500 nodes with antivirus /firewall protection, remote monitoring of energy meters including network server, software with billing, E-mail /SMS option activation and establishment of communication with existing Elnet software at BSO office at Gorkha Hill area complete all as specified and directed by Engr-in-Charge. Make: Elmeasure or techno commercially equivalent in L&T /Secure Meters/Jaipuria Meters/Havells. Note: (i) The software should be able to send all the data to the main server placed at BSO Office at GH area. (ii) The software should be capable of sending bulk SMS & e-mails to the individual consumers with the help of dedicated Network Server.

Note for Item Nos 2 to 5:- Design/Drawing/BOM/Technical specifications of the Meter/ outdoor data accumulator/ software is to be obtained from OEM /Auth Supplier & the same is to be got approved from the Engr-in-Charge before placing final order to the OEM/Auth Supplier wherever equivalency of the specified Cat Part No /Make reference is concerned.

S & F desktop computer with the following specifications complete all as specified and directed by Engr-in-Charge :- Software Parameters:- (a)4GB RAM, DDR3 SDRAM with Genuine Windows 10 Operating system or higher version (b) Intel Processer with 7th Gen core i5 processor with min speed of 2.3GHz (c) Hardware storage of min 1TB Hardware Parameters:- (a) Screen size of min 23 inches of black in color with full HD display (1920 x 1080), LED antiglare backlit display (b) Minimum of 3 USB ports. (c) With optical drive of tray load DVD Drive. (d) With one Qwerty keyboard & wireless mouse. Make : Dell, Model No : Inspiron 3464 or techno-commercially equivalent in HP/Apple.

S & F UPS with following specifications complete all as specified and directed by Engr-in-Charge:- (a) Capacity of 600VA with Output voltage 230V AC +10 % of frequency 50HZ + 1%. (b) Battery of 12 Volts, 7 AH- 1 No with min 30 mins backup with full battery condition. (c) Output waveform of Pseudo Sine. (d) Off mode battery charging with high voltage protection (e) Battey warranty of atleast 2 years Make : V- Guard, Model No : Slender Plus 600, or techno-commercially equivalent in Luminous /Microtek

Supply, install, commissioning & testing of line interactive external battery UPS 1000 VA alongwith suitable UPS trolley and with the following technical specifications : Input Voltage-220V AC/230V AC Voltage Range-140 to 300V AC Frequency Range-50Hz

Output AC Voltage Regulation (Battery Mode)-220/230/VAC+10% Frequency RAnge (Battery Mode)-50Hz+ 1Hz Transfer Time-Typical 4-8ms Waveform (Battery Mode)-Simulated Sine Wave External Battery Battery -12V DC, 150AH-01 No, suitable for giving a backup of minimum 6 hours. Floating Charge-13.7V DC+ 2% Voltage Max Charge Current-Default 10A (5A/10A/15A/20A Adjustable with jumper settings) Indicators AC Mode - Green Lighting Battery Mode - Yellow Lighting Fault - Red Lighting Alarms Low Battery - Sounding every second Overload-Sounding every 0.5 second Battery Replacement Alarm-Sounding every 2 seconds Fault-Continuously Sounding Protection Full Protection-Overload, Discharge and overcharge Protection Make : Microtek, Model : UPS DESIRE PRO+1000 or techno-commercially equivalent in LUMINOUS /SUKAM. Note :Design /Drawing/BOM/Technical specifications of theUPS is to be obtained from OEM/Auth Supplier & the same is to be got approved from the Engr-in-Charge before placing final order wherever equivalency of the specified Cat Part/Model ref is concerned.

S & F laserjet printer with single function black & white with USB connection with printing speed of min 18 pages per minute with resolution 600 x 600 x 2DPI complete all as specified and directed by Engr-in-Charge. Make : HP, Model No: P1108 or techno-commercially equivalent in Canon /Epson.

Note for Item Nos 6 to 9:- (i) Design /Drawing /BOM of Items /Equipments is to be obtained from the manufacturer /auth supplier & the same is to be got approved from Engr-in-Charge prior to placing final order to the manufacturer /supplier. (ii) The complete work of installation, testing, commissioning & software enabling for bill generation as per the requirement of GE /Engr-in-Charge is to be got executed by the OEM or his authorized channel partner only.

S & F rigid non-metallic PVC conduit 25mm dia exclusive of boxes (junction /terminal) but inclusive of all tees, bends, elbows, reducers, bellmouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc., complete all as specified and as directed.

S & F rigid non-metallic PVC junction boxes of 1 to 4 way of size 25mm dia complete all as specified and as directed.

Supply & lay in PVC Conduit FRLSH PVC insulated copper conductor cable of size 6 Sqmm (Unsheathed) of black colour, 1100 Volts conforming to IS: 694 complete all as specified and as directed. Make: Havells, Cat No : WHFFFN…F16X0 or techno-commercially equivalent in Polycab/Finolex Note: Conduit shall be measured and paid separately.

Supply & lay in PVC Conduit FRLSH PVC insulated copper conductor cable of size 2.5 Sqmm (Unsheathed) of black colour, 1100 Volts conforming to IS: 694 complete all as specified and as directed. Make: Havells, Cat No : WHFFFN…F12X5 or techno-commercially equivalent in Polycab/Finolex Note: Conduit shall be measured and paid separately.

M & L for sub main wiring with four single core, multi stranded, FRLS, PVC insulated, 1100 Volts grade, ISI marked, cable with multi stranded copper conductor cable of size 6 Sq mm in and drawing through PVC casing caping medium grade including continuous FRLS PVC insulated copper conductor two run of single core earth continuity conductor of size 6 Sqmm connected to common earth complete all as specified and directed by Engr-in-Charge. Make:Havells/Finolex/Polycab. Note: (i) 6 runs of 6 Sqmm cable and one run of medium grade PVC casing caping shall be measured as one unit length (ii) The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth (iii) Cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates.

M & L for sub main wiring with two single core, FRLS, multi stranded, PVC insulated, 1100 Volts grade, ISI marked, copper conductor cable of size 6 Sq mm in and drawing through PVC casing caping medium grade including continuous FRLS PVC insulated copper conductor one run of single core earth continuity conductor of size 6 Sqmm connected to common earth complete all as specified and directed by Engr-in-Charge. Make:Havells/Finolex/Polycab. Note: (i) 3 runs of 6 Sqmm cable and one run of medium grade PVC casing caping shall be measured as one unit length (ii) The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth (iii) Cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates.

M & L for hot pressed moulded meter box of thickness 16 SWG and minimum Size 250 (H) x 250(W) x 155(D) mm with viewing glass and earth bolt suitable for mounting one number single phase energy meter with provision for fixing the energy meters including proper stickering of user Bungalows/Qtr Numbers below the meter with and including wiring & accessories including taking down of old meter panels complete all as directed and as specified by Engr-in-Charge. Make : Sintex, Cat No : GSMB-2525 or techno-commercially equivalent in Hensel/Rittal.

M & L for hot pressed moulded meter box of thickness 16 SWG and minimum Size 400 (H) x 300(W) x 190(D) mm with viewing glass and earth bolt suitable for mounting two numbers single phase energy meter with provision for fixing the energy meters including proper stickering of user Bungalows/Qtr Numbers below the meter with and including wiring & accessories including taking down of old meter panels complete all as directed and as specified by Engr-in-Charge. Make : Sintex, Cat No: GSMB-4030 or techno-commercially equivalent in Hensel/Rittal.

M & L for hot pressed moulded meter box of thickness 16 SWG and minimum Size 450 (H) x 375(W) x 200(D) mm with viewing glass and earth bolt suitable for mounting one number three phase energy meter with provision for fixing the energy meters including proper stickering of user Bungalows/Qtr Numbers below the meter with and including wiring & accessories including taking down of old meter panels complete all as directed and as specified by Engr-in-Charge. Make : Sintex, Cat No: GSMB-4537 or techno-commercially equivalent in Hensel/Rittal.

M & L for hot pressed moulded meter box of thickness 16 SWG and minimum Size 530 (H) x 450(W) x 75(D) mm with viewing glass and earth bolt suitable for mounting four numbers single phase energy meter with provision for fixing the energy meters including proper stickering of user Bungalows/Qtr Numbers below the meter with and including wiring & accessories including taking down of old meter panels complete all as directed and as specified by Engr-in-Charge. Make : Sintex, Cat No: GSMB-5345 or techno-commercially equivalent in Hensel/Rittal.

M & L for hot pressed moulded meter box of thickness 16 SWG and minimum Size 570 (H) x 280(W) x 220(D) mm with viewing glass and earth bolt suitable for mounting three numbers single phase energy meter with provision for fixing the energy meters including proper stickering of user Bungalows/Qtr Numbers below the meter with and including wiring & accessories including taking down of old meter panels complete all as directed and as specified by Engr-in-Charge. Make : Sintex, Cat No: GSMB-5728 or techno-commercially equivalent in Hensel/Rittal.

M & L for hot pressed moulded meter box of thickness 16 SWG and minimum Size 650 (H) x 450(W) x 150(D) mm with viewing glass and earth bolt suitable for mounting four numbers single phase energy meter with provision for fixing the energy meters including proper stickering of user Bungalows/Qtr Numbers below the meter with and including wiring & accessories including taking down of old meter panels complete all as directed and as specified by Engr-in-Charge. Make : Sintex, Cat No: GSMB-6545 or techno-commercially equivalent in Hensel/Rittal.

M & L for hot pressed moulded meter box of thickness 16 SWG and minimum Size 700 (H) x 480(W) x 210(D) mm with viewing glass and earth bolt suitable for mounting six numbers single phase energy meter with provision for fixing the energy meters including proper stickering of user Bungalows/Qtr Numbers below the meter with and including wiring & accessories including taking down of old meter panels complete all as directed and as specified by Engr-in-Charge. Make : Sintex, Cat No: GSMB-7450 or techno-commercially equivalent in Hensel/Rittal.

M.V.K.ENTERPRISES

ANKIT SHIP REPAIRERS AND SUPPLIERS