SPECIAL REPAIRS TO KALINGA CONFERENCE HALL ADDITION ALTERATION TO EXISTING ENTRANCE GATES AND CHAINLINK FENCING AT VARIOUS LOCATIONS AT DSSC WELLINGTON

Amount

Dismantling wooden boarding of any size & any thickness fixed on wall on wooden battens with screws and considered under schedule of credit.

Demolition floor, hearth or wall tiling including cement mortar bedding including backing and cutting out broken tiles and rubbish off to out side MD land.

Demolition plain cement concrete of any description and in any position of floors and partinigs not otherwise specially provided for and removing debris to out side MD land.

Dismantling Stone slab and tiles laid bedded and pointed in any mortar of any description or thickness in floor, approns etc and considered under schedule of credit.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets and suspension grid and considered under schedule of credit complete all as specified and directed.

Taking door Chowkhats or frames with shutter (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and as directed

Removing the existing old push up/ tip up chairs seat/back including foam ,plywood, rexine etc all as specified and as directed

Demolition of Brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified

Forming jambs, etc. to openings (to fore going items) in cement mortar 1:4 including cutting toothing and properly bonding into old work also facing,jointing and pointing to match existing work complete

S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing all as specificed and as dirceted.

S&F 5 mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing all as specificed and as dirceted..

M & L for second class hardwood for Cornices/beading/nosing/moulding as used in pre-engineered wall/floor panelling etc of cross sectional area n.exc 25 Sq Cm as as specified and directed.

M&L for Plain fillets 2nd class hardwwod exc 6 sqcm but n.exc 25 sqcm. square, rectangular or triangular in section, clean sawn, secured with extansion fasteners in wall/floor @ 1.00mtr intgerval (plugging to wall).

M&L for 1213x193mmx8mm thick / or any size laminate wooden flooring having abrasion class AC4/ class 32 with interlocking system and corner and edges profiles over 1mm thick plastic sheet and 2mm thick form complete laid all as per manufacutures instructions and as directed by Engineer-in-charge. Make :Florz, Sapphire, Terazzo or equivalant

M&L in repair 12 mm thick prelaminated particle board , exterior grade, preliminated one side with decorative choice lamination and other side balancing white laminations, fixed to aluminium/ timber frame all as specified and directed.

M&L for Preparation of new/previously untreated wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint over a coat of red oxide zinc chrome primer.

M&L for applying one coat of Touch wood polish on wooden surfaces of any description width or girth including necessary preparation of surfaces including filling of holes / dents with filler material and applying one coat of filled area with touch wood polish all as specified and directed by Engr-in-Charge.

M&L for Granite stone slab flooring 18 to 20 mm thick any colour/shade (as approved by GE) machine cut and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing,as required over 15 mm thick rendering in CM 1:3 to be fixed as in door/window cladding/openings and flooring complete all as specified and as directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

M &L for modular false ceiling systems in Armstrong Scala having micro look teglar edges of 12mm thickness of size 600mmx600mm GRG ceiling tiles shall have a humidity resistence of RH 99 with NRC level of 0.70 and light reflactance up to 85% and fixed with suspension system (Grid) The size of the same is 15mm x 32mm, The galvanised iron sheet of thick 0.30mm used in the manufacturing of gird with zinc coated for preventing corrosiion. The main runners are hung from the soffit with help of GI wire hanger complete with installation all as manufacturers instruction and as directed. Make: Armstrong/Diamond/Saint gobin

M & L for UPVC windows with glazing, white colour provided all as per manufacturer's direction and following specifications all as directed. 1. The profile for construction of UPVC window frame shall be made of UPVC material confirming to IS 10151. 2. The frame shall be made of extruded UPVC section having overall dimension of 65 × 50 mm having wall thickness 2 mm ± 0.2 mm 3. Corners of wall frame shall be joined by MS galvanized brackets, joints mitred and plastic welded . 4. The hinge side vertical outer frame shall be reinforced with galvanized MS tube of wall thickness 1 mm ± 0.1 mm and the tie rod shall be provided at the bottom of the frame. 5. The profiles should be single chamber system which shall provide high insulation properties. 6. The window system should be glazed with 6 mm thick plane glass fixed in window frame as per manufacturer's instruction . Note: The entire fixing shall be done as per manufacturer's instructions and specification and as directed by Engg-in-Charge.

M&L for providing UPVC Door with Shutters. The construction profile for UPVC Door shall be overall frame sectional size 60 x 58 mm with wall thickness 2.70 +/- 0.2 mm extruded sections. The corners shall be plastic welded. The hinge side vertical outer frame shall be reinforced with galvanised steel profile of wall thickness 1.2 mm +/- 0.2 mm. The door shall be fixed to walls using 8 mm dia 80 mm long MS screws minimum 3 Nos on each side. The glazing shall be fixed to door frame with UPVC standard beadings of sectional size 24.05 x 16 mm & 2 mm thick. The bottom portion of door shutter shall be provided with UPVC board 5 mm thick & 1 mtr in height and the balance shall be glazed excluding the shutter frame area. The shutter shall be fixed to frame using 3 nos of 3D hinges. The Door shutter shall be provided with 12 mm thick sheet glass & 5 mm UPVC board with EPDM rubber gasket, one motice lock with powder coated handles and two numbers powder coated MS tower bolts complete all as specified & as directed.

S&F for Push up heavy duty chair (SR 07, Slider, push back (22'') HSN/SAC Code 9403) fixed to floor with suitable adhesive and expansion bolt etc., all as specified and directed.(anchor fasteners shall be not less than 10 mm dia and length 120 mm.) Make : SRSeating or equivalant

Chairs description : Push back mechanism chair Arm rest to arm rest (ctc) 559mm (22") ABS molded housing for back covers. All sheet metal parts with powder coated. Arm rest in PPCP with cup holders. Seat numbering on inner both the side of the chair stands with silicon stickers. Row number for seat alont the aisles. Provision for lights on sides along with aisles with the row and the seat numbers display.Fabric: Colour approved by GE. 100% polyster with 4mm lamination.Frames : Thick high pressure & induction heated plywood for seat manufactured with hardwood veneers. 12mm thick high pressure & induction heated plywood for back manufactured with harrdwood veneers. Polyurethane foams: Thickness : a) Seat cushion tapered type front portion with a hump front - 115mm (+/- 5mm) Back - 90mm (+/-5mm) b) Back cushion bucket type Headrest - 110 mm (+/-5 mm) Centre- 75 mm (+/-5 mm) Bottom - 110 mm (+/-5 mm) Sides contours - 70 mm (+/-5 mm) Size : a) Seat cushion : 510 mm (+/- 5 mm) x 500 mm (+/-5mm) b) Backcushion : 740 mm (+/- 5 mm) x 500 mm (+/-5mm) Density: Density of cushions - 50 to 55 Kg/m3

Springs : For sliding mechansim torsion spring/spring steel IS :44541981 grade IIISheet- metal components: HRCQ/CRCA sheet metal IS : 2062-2011 & IS 4923 -1997 side stands Side stand 3mm (+/-0.2mm) thick size : 415mm (+/-5mm) x 345mm (+/-5mm) both side bottom profiledesign cut. 75mm x 52mm 14 g (+/0.2mm) 190 mm length tubular pipe for the leg wielded to the 3mm plate. Flat for base of the stands 280mm (+/- 2mm) length 50mm (+/-2mm) x 5mm (+/0.2mm) Push back frames : Frames are constructed by 40mm x 20mm CRCA pipe supported by Langles of 2mm thcikness of HRCA sheets and this mounted with injection molded palstic wheels of 2nos of dia 45mm and thickness of 45mm made of engineering plasitc (POM) materials. Push back mechanism: Slider U box formed out of 2 mm HRCA sheets of size 136mm x 306 mm free moment of seat with engineering plasitc rollers and proper injection molded PVC noise damping stoppers are provided at both end of slider U box. Impact area of PVC noise damping stoppers are provided at both end of slider U box. Impact area of PVC noise damping stoppers at back which sis suported by allen bolt of 6mm x 75mm the liing of bright metal 280mm x 25mm x 5mm. Connected to push bcak mechanism box of 180mm (+/-2mm) x 70 (+/-2mm) mm & height of the box 15mm (+/- 2mm), ear "L" bracket attached to the box 190mm(+/-2mm) x 135 mm (+/- 2mm) with two slot holes for fixing the back. Seat and back cushion housing : ABS molded vacuum forming out of 2mm sheet Instillation of the chairs: The chairs to be installed to the flooring provided to us ready to fix condtion with the chemical anchoring M 10 x 100mm.

M&L for Servicing of puch up chairs such as loose of nut, bolt,screws including missing nut,bolt to be fitted as required and making serviceable all as specified and directed by Engr-in-Charge.

Removing the existing old disturbed tip up chairs and taking out the damaged wooden runners and grouting with CONBEXTARA GP 2 or equivalent as approved by GE general purpose for free flow high strength non shrink cementeous grouting material using mechanical agitator all as per manufactures instruction including embedding 8 mm dia fastener purpose made anchor bolts and refixing the chairs in position all as specified and directed by Engr-in-Charge.

S & F in repairs / patch work rexine cloth not less than 1.70 mm thick (48" wide) with RM material cost not less than Rs. 250/- and colour matching with existing and pasting with approved adhesive and stitching as required in existing tip up chairs all as approved and as directed.

Supply and Fix the Conference table 12 seater of Model MINGLE of Make Godrej Interio of colour and layout or commercially equivalent in design and layout as approved by GE in writing all as specified and directed.

Boarding, supplied & Fixed 40 mm thick 2nd class hardwood with nails in any situation (except flooring and skirting) planed both sides with butt joints

S&F 19 mm thick prelaminated particle board, Exterior grade, prelaminated both sides with decorative choice lamination fixed with screws to timber frame work, including external teak wood lipping 6mm thick fixed with nails

Taking down cement or cement lime plaster of any description on brick or stone wall etc incl racking out joints, hacking for key scrubbing down with water etc and removing the rubbish outside MD land.

M &L for precast Cement Concrete block masonry (1:3:6) type C1 using 20mm graded stibe aggregate with solid block,exceeding 10 cm in width and setting in cement mortar 1: 6 all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work/Stone work in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for complete removal of existing treatment of wall and applying two coats of distemper oil emulsion over and including one coat of primer and one coat of wall care putty complete all as specified and as directed. Make : Asian/Berger/Nerolac.

M&L for preparing new surfaces of wall and applying two coats of distemper oil emulsion over and including one coat of primer and one coat of wall care putty complete all as specified and directed. Make : Asian/Berger/Nerolac.

M & L for applying one coat of distemper oil emulsion on old decorated surfaces of ceiling including preparation of surfaces by washing, rubbing down and stopping of distempered surfaces all as specified and directed. Make : Asian/Berger/Nerolac.

S & F in repair Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders framed balusters; walk ways railings ; framework of water tanks and similar work confirming to Fe- 290(Gde-E-165)

M&L For preparing new surface of steel and applying two coats of synthetic enamel paint over a coat of primer exc 10 cm width or girth complete all as specified and as directed.

Taking down wooden curtain rods brackets with doom suitable for single curtain rods all as dircted and specified

Refixing old wooden curtain rods brackets smooth finish with doom wooden curtain rods of 25 mm fixed in position with approapriate screws all as dircted and specified

M&L in repair 3 mm thick APP modified waterproofing membrane, weighing not less than 3.6 kg/sqm, reinforced with non woven polyester matt black finished weighing not less than 160g/sqm having softening point not less than 150 degree celcius longitudnal tensile strength not less than 300 N/5cm , 10 cm overlap and 15 cm for end laps , over a coat of bitumen primer @ of 0.20 kg/sqm and finising with bituminious aluminium paint applied @ 0.10 kg / sqm and finished all as as per manufacturers instructions and as directed. Note:-The work shall be carried out by authorised appicator of manufacturer.

M &L for 30 mm thick Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded aggregate) as in roof padding / leveling course kerbs, or chamfered on edges finished even and smooth with using extra cement and mixed with water proofing compound. Note : Liquid ( Water proofing compound shall be measured and paid seprataly )

M & L for 10mm thick Screed bed or bedding layer of cement mortar 1:3 for floor finishes and mixed with water proofing compoundcomplete all as specified and directed. Note : Liquid ( Water proofing compound shall be measured and paid seprataly )

Supply only liquid water proofing compound

Dismantling single layer mangalore pattern or similar tiles in roofing

M&L for Roof tiles, Mangalore pattern,interlocking at side joints, laid in cement mortar including cutting holes through tiling for pipes and making good as required at site all as specified and as directed.

Fixing only roof tiles mangalore pattern, interlocking at side joints, laid dry complete all as specified and directed.

M & L for Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6

M&L for Preparation of new/old untreated surfaces of magalore pattern tiles including brooming down or steel wire brushing cleaning with bio wash and applying one coat of roof tile guard exterior grade apex paint or eqiuralent as approved by GE all as specified and directed.

Dismantling post/struts (wood,steel or RCC) of any section embedded in concrete including taking out embedded portion and making good disturbed ground complete all as specified and as directed

Dismantling MS steel work of any descrption not other wise provided for complete all as specified and as directed

Dismantling fencing wire mesh of any type and thickness complete all as specified and as directed

Dismantling barbed wire of any type complete all as specified and as directed

Excavation in Post Holes ( or similar holes) each not exceeding 0.5 Cum and getting out in hard/dense soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed

M&L for providing PCC 1:3:6, type C2, using 40mm graded stone aggregate as in foundation filling and mass concrete including necessary form work complete all as specified and as directed

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends,each screwed and to be fitted with washer and the hexogonel or square nut dia 5 to 10 mm not exc 5cm long complete all as specified and as directed

Supply only chain link MS galvanised fencing any size or type and any thick complete all as specified and as directed

Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed

Supply only MS round bar 10 mm dia fixed indepently including hooking ends for chain link fencing conforming to Fe 290 Gde E-165 complete all as specified and as directed

S&F in 2 strand steel barbed wire 2.24 mm dia barbs at 75 mm spacing and fixing to MS round bar nibs to RCC/Steel posts with new GI wire ( Note :- Each line of wire to be measured) complete all as specified and as directed)

S&F mild steel for Framed work as in doors or gates of square/rectangular tubular pipe or angle iron or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and pintel hinges or steel hanging door fittings, inclusive of steel sheeting or other covering, running rails and guides, CI ornaments fitting; also fastening and fixing complete and similar work confirming to Fe-290 Gde E- 165 complete all as specified and as directed. Note :- All CI oranamental fittings will be measured by weight and paid in this items, no extra amount will be paid of any item. Gate will be made as per sample as in Glencoe or as directed by Engr-in-Charge.

M&L applying two coats of synthetic enamel paint over a coat of red oxide primer including preperation of new steel surfaces, n exc 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and as directed

M&L Reinforced cement concrete type B1, 1:2:4 (20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and as directed.

M&L Reinforced cement concrete type B1, 1:2:4 (20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed

Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished flat surfaces. complete all as specified and as directed

M&L Mild steel bars TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

All as per item No 68 above but 8 mm dia & over upto and including 10mm dia in stirups, spacers and binders complete all as specified and as directed

S&F Polycorbonate any colour (as approved) plane solid sheeting 4mm thick with side lap fixed with coach screw and washer in door, wall, gate, roof etc complete all as specified and as directed

M&L for Granite of 18-20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl 15mm thick screed bed in CM 1:4 including polishing, rounding /notching of ends and making hole for inserting of pipe complete all as specified and directed

M&L for 40mm Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed

M&L for Machine pressed pre polished rubber moulded, lacquer, finish precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade concrete with grey cement and no pigment laids over including 50mm thick M sand compacted layer over compacted earth complete all as specified and as directed.

M&L for providing 100 mm thick PCC 1:4:8, type D2, using 40mm graded stone aggregate as a sub base complete all as specified and as directed

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out hard/dense soil complete all as specified and as directed

Excavation in trenches n.exc 1.50 m wide and n.exc 1.50m in depth in foundation in hard/dense soil and getting out. complete all as specified and as directed

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm. complete all as specified and as directed

Removing excavated material not exc. 50m, depositing where directed at a level n.exc 1.50 m above the starting point in soils. complete all as specified and as directed

Demolition of brick work/PCC block masonry/stone masonry etc built in cement mortar, incl all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc complete all as specified and as directed

M&L pre-cast cement concrete block in cement concrete masonry 1:3:6 type B-1 (using 20 mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and as directed

Peparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint white or tinted, complete all as specified and directed

Taking down old, unsv aluminium/copper point wiring (light, fan, socket or power) complete, incl fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-Charge. Note:Old existing light fittings of any size/type taken down/dismantled to be deposited to MES E/M Storeyard and cost of transportation of the same from site of work to MES E/M Storeyard is deemed to be included in the unit quoted rates.

Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-Charge.

Disconnecting/dismantling of old existing un serviceable DB's any type/way 240/415 Volts with their old/un serviceable burnt MCCB/MCB's etc. complete all as specified and directed by Engr-in-Charge. NOTE for Item Nos 83 to 85 : Cost of making good the disturbed surfaces is deemed to be included in the unit quote rates.

M & L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed for One Light/fan/Call Bell etc. point controlled by one switch 5/6 Amps. : Make of cable : Havells/Polycab/Finolex.Make of conduit-Precision/Modi/finolex

Description all as per Item No.84 above, but One switch socket outlet point 5/6 Amps on independent board.

Description all as per Item No.84 above, but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete. NOTE for Item Nos 84 to 86 : 1) Modular metal flush boxes shall be measured & paid separately 2) Cutting chases & making good the disturbed surfaces is deemed to be included in the unit quoted rates.

M & L for concealed sub-main wiring alongwith earth wire of size (2 x 2.50) sq. mm + (1 x 2.50) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex, Make of conduit-Precision/Modi/finolex.

M & L for concealed sub-main wiring alongwith earth wire of size (2 x 4.00) sq. mm + (1 x 4.00) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex, Make of conduit-Precision/Modi/finolex NOTE for Item No. 87 and 88 : 1) Two runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. 2) Modular metal flush boxes (if req) shall be measured & paid separately.

M & L for Surface 3-Phase sub-main wiring alongwith earth wire of size (4 x 6.00) sq. mm + (1 x 6.00) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex, Make of conduit-Precision/Modi/finolex NOTE : 1) Four runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. 2) Modular metal flush boxes (if req) shall be measured & paid separately.

S & F Modular switch, one way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXXW061, Model - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S & F Modular switch, one way, 16 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXXW161, Model - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S & F Modular shuttered socket outlet 3 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKSWW063, Model - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S & F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKCWW163, Model - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 1/2 modules all as directed. Cat No : ACTXMIIX01/02, Model - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 3 modules all as directed. Cat No : ACTXMIIX03, Model - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

Supply & Fixing modular PVC Surface box suitable for fixing switches/sockets of 6 modules all as directed. Cat No : ACNXMIZX06 Model - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 6 modules all as directed. Cat No : ACTXMIIX06, Model - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 8 modules all as directed. Cat No : ACTXMIIX08, Model - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

Supply & Fixing modular cover plate suitable for fixing switches/sockets of 1/2 modules all as directed. Cat No : ACVPPCWV01/02, Model - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

Supply & Fixing modular cover plate suitable for fixing switches/sockets of 3 modules all as directed. Cat No : ACVPPCWV03, Model - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor

Supply & Fixing modular cover plate suitable for fixing switches/sockets of 6 modules all as directed. Cat No : ACVPPCWV06, Model - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor

Supply & Fixing modular cover plate suitable for fixing switches/sockets of 8 modules all as directed. Cat No : ACVPPCWV08, Model - Verona of CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor NOTE for Item Nos 90 to 102 : The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & socket

S&F, IP >= 20, Class I, recess mounting LED square shape slim ceiling light fitting 42 W or next higher rating, CRI >= 80, CT >= 5700 K, suitable for 600 x 600 mm (approx dimensions) suitable for modular Grid/Armstrong ceilings, integrated type, with high efficiency electronic driver, surge suppressor of 2 KV or more & high brightness LEDs, luminaire efficacy > 95 lumens/Watt, power factor >= 0.90, operating range – 140 to 270 V, 50 Hz with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size complete all as specified and directed. MAKE:- Cat No : PLUTONEO2X2PLR42WLED857S of make Havells or techno-commercially equiv In Jaguar/Philips

S&F decorative wall mounting fixture luminaire with PC diffuser suitable for lamps with B22 with all accessories internally prewired and including necessary wiring/cabeling alterations of auto make the fitment completely capable for use as Engagement light & connecting up complete all as specified and as directed. Make: Havells, Cat No:LHFOAJE2TZ1I060, Model - Florentine or techno-commercially equivalent in Philips/Jaguar

Supply and fixing in repairs LED Rojo lamps of rating 7W, red lamp with B-22 base cap all as directed by the Engr-in- Charge Make : Havells,Cat No.-LHLDBWEB4P8R007(RED LAMP) or techno-commercially equivalent in Philips/Jaguar

Supply and fixing in repairs LED Rojo lamps of rating 7W, green with B-22 base cap all as directed by the Engr-in- Charge Make : Havells,Cat No.-LHLDBWEB4O8R007(GREEN LAMP) or techno-commercially equivalent in Philips/Jaguar

S & F ceiling/wall/panel mounted LED TRACKLIGHT (WHITE COLOUR) 12 W or next higher rating suitable for Track Channel 1/2 Mtrs span, CRI > 80, CT=6500 K ,twin/three core twisted flexible copper conductor cable of suitable size in flexible conduit all as specified and as directed. Make: Cat No LSPT12 of Luker or techno-commercially equivalent in Philips/Havells Note: Track channel of1/2 Mtrs shall be measured & paid separately under relevant items.

S & F ceiling/wall/panel mounted LED TRACK CHANNEL (WHITE COLOUR) 1 Mtrs length suitable for mounting of 03 Nos Tracklights 12 W, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible conductor cable of suitable size complete all as specified and as directed. Make : Luker, Cat No : LTM1 or techno-commercially equivalent in Philips/Havells. Note: Track Lights 12 W shall be measured & paid separately under relevant items.Imp Note for Item Nos 103 to 108 : 1) Design/Drawing/Technical catalogue/ specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge/GE for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned before placing order to the Manufacturer/Supplier. 2) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates.

S & F MCB SPN DB, 12 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed by Engr-in-Charge.Make: L&T, Cat No: DBSPN012DD or techno-commercially equiv in Legrand/Siemens

S&F MCB, SPN, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA all as specified and dircted by Engr-in-Charge. Make-L&T, Cat No-BB20320C or techno-commercially equivalent in LEGRAND/SIEMENS.

S&F MCB, SP, C-Series 240 Volts of capacity 40 Amps with breaking capacity 10 KA. Make-L&T, Cat No-BB10400C or techno-commercially equivalent in LEGRAND/SIEMENS.

S&F MCB, SP, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA. Make-L&T, Cat No-BB10320C or techno-commercially equivalent in LEGRAND/SIEMENS.

S & F MCB, DB, TPN, 06 ways, DOUBLE DOOR, IP-43, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete including blanking plates as required and fixed flush to wall/other surface complete all as specified and as directed. Make : L & T, Cat No : DBTPN006DD or techno-commercially equivalent in Siemens/Legrand.

S&F 6 Way,IP43,IK-09 Metal Double Door,MCCB vertical DB fitted with Busbar and blanking plates, Neutral link with 4 pole MCCB as Incomer and SP/TP MCBs as ougoings, blanking plates , flushing to wall/fixing inside enclosure and making good the disturbed surfaces with all other accessories including necessary connection complete all as specified and directed by Engr-in-Charge.Make: L&T, Cat No: DBTPL004DD or techno-commercially equiv in Legrand/ABB. Note:- (i) The cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates.

S&F in repairs MCCB, 4 pole,100A rating (Ics = 100% Icu),415Volts,25 KA Breaking capacity,with adjustable thermal and fixed magnetic setting and making cut in existing panel for fixing of MCCB complete all as directed by the Engr-in-Charge.Make: L&T, or techno-commercially equiv in ABB/Siemens. Note for Item No 109 to 115:- The Make/Model of MCCB/MCBs shall be same as that of MCCB/MCB DBs

S & F MCB, TP, 10KA, 415V, "C" curve, 63 A, ISI marked complete all as specified and as directed. Make : L & T, Cat No : BB30630C or techno-commercially equivalent in Siemens/Legrand.

S & F MCB, TPN, 10KA, 415V, "C" curve, 63 A, ISI marked complete all as specified and as directed. Make : L & T, Cat No : BB40630C or techno-commercially equivalent in Siemens/Legrand.

M&L for concealing of rigid non-metallic PVC conduits of external dia 25 mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends for fixing complete all as specified and directed.Make:Precision/Finolex/Modi. Note: the chases cutting to wall/Surface and making good the disturbed surfaces is deemed to be included in quoted rate .

S&F TP (3-Way) enclosure, IP-30 for independent mounting of MCB change-over switch (3M) fixed flush to wall/other surface complete all as specified and as directed. Cat No DBENC003SD of make L&T or techno-commercially equivalent of LEGRAND/SIEMENS

S&F MCB Double Pole, two way with centre-off changeover switch suitable for 240 V AC of rating 40 A complete. Cat No AUC00204000 of make L&T or techno-commercially equivalent of LEGRAND/SIEMENS

S & F IP-68,IK-07, LED Underwater Fountain Light, 24 V DC, 9 W or next higher rating, CT=3000 K (Warm White), integrated type, surge suppressor/ protection & high brightness LEDs, high quality 304 stainless steel material housing and including 1.5 mtr UL Certified cable with suitable fixing arrangement complete all as specified and as directed. Make : Jaquar or techno-commercially equivalent in other make

S & F IP 68, 24 VDC, Outdoor mounted, LED DRIVER, suitable for Underwater Fountain Light, 24 V DC, 9W integrated type with all accessories internally prewired, connecting up with fixing arrangments complete all as specified and as directed. Make :Jaquar, or techno-commercially equivalent NOTE : LED Driver shall be made water-proof by enclosing the same inside water-proof (IP-68) enclosure as per actual/ground. In case of any technical issues, Contrs are requested to visit proposed site of work. Any issues/doubts raised after acceptance of Tender/Contract, shall not be agreed for & the decision of the Engr-In-Charge & GE shall be final & binding.

Supply, install, commissioning & testing of Single Phase, IGBT Technology based Online UPS system of capacity 3 KVA, indoor compact type complete with battery system & battery enclosure suitable for minimum 03 hours back-up & comprising of the following features all as specified & as directed : (a) Output Power Factor @ 0.9. (b) Inbuilt charger of 9.5 Amps. (c) Inbuilt Over Voltage Cut-Off Device with Surge Protection. (d) Micro Controller based. (e) Smart LCD display for real-time information. (f) EMI/RFI Noise Filter. (g) Hot Stand-by & static by-pass feature. (h) Advanced PFC Technology/Battery Management. (j) Configurable Output Voltage Settings. (k) Over temperature indication & protection. (l) Generator compatible. Brief technical specifications of the IGBT Technology based Online UPS system shall be as follows : MODEL : (a) Type & Capacity - Single Phase, 3 KVA/2700 W. INPUT : (b) Input voltage range - 110 VAC + 5% ~ 300 VAC + 5%. (c) Frequency range - 40 to 70 Hz. (d) Phase - Single Phase with Ground.

OUTPUT : (e) Output voltage - 200/208/220/230/240 VAC. (f) Freq range Battery mode - 50 Hz + 0.25 Hz. (g) Power factor/Crest factor - 0.9/3:1. (h) Overload capability - 110 % for 10 Min, 130 % for 60 Sec. (j) THD - <2% for Linear load & 4% for Non-linear load. TRANSFER TIME : (k) AC to Battery mode - 0 ms. (l) Inverter to by-pass mode - < 4 ms (Typical 2.5 ms). (m) Waveform - Pure Sinewave. (n) Efficiency - 85% ~ 92%. BATTERY & CHARGER : (o) Battery type/No/Make - 12 V, 100 AH/06 Nos SMF type for minimum 3 Hours Back-up . (p) Charging current - 1.5 A ~ 9.5 A. BATTERY ENCLOSURE : Battery enclosure shall be MS Powder Coated. ENVIRONMENT : (q) Operating temp range - 0 to 40 Deg Cent. (r) Humidity range - 20 to 95% (Non-Condensing). (s) Noise level range - Less than 50 dBA @ 1 Mtr. (t) LCD indications. Model : NM72MX2KK11/IB MODEL (MAX+ Series) of make MICROTEK or techno-commercially equivalent of EMERSON/APC.

S&F MCB, TPN, C-Series 240 Volts of capacity 63 Amps with breaking capacity 10 KA all as specified and dircted by Engr-in-Charge. Make : L&T/SIEMENS/LEGRAND.

P K ENTERPRISES

KRA Engineering and Construction