TTPS ES EM II Charges for replacement of damaged distribution box change over switch Three phase MCB distribution board by new one Erection of new cable tray with M S structural supports removing and relaying of power supply cables in the newly er

Charges for fabrication of M.S welding supply distribution box of 750 x 1100 x 350 mm size by 2 mm M.S sheet by cutting, welding, Grinding, bending and drilling. Making and fixing of supporting 3mm M.S. Flat inside the M.S. Box, Fixing of 3 Nos. 300 Amps Porcelain fuse units, 8 Nos. Porcelain Insulators and 4 Nos copper busbars (size: 500 x 25 x 6 mm) on the M.S. Flat with internal wiring work and Painting with two coats of smoke gray enamel paint and erection of the new M.S box. (Including cost of 2 mm M.S Sheet, 3 mm M.S. Flats, copper busbars, Insulators, paint, consumables such as cutting gas, welding rods and Hire charges for T&P). (300 Amps Porcelain fuse units will be supplied by TANGEDCO)

Charges for dismantling the electrical connection, dismantling the existing damaged change over switches. (Including cost of consumables and hire charges for T & P)

Charges for fixing of 100Amps three phase 500V, 4 pole change over switch on suitable angle iron frame work, grouting the angle on wall providing electrical connection in the change over switch. (Including cost of 100Amps three phase 500V, 4 pole change over switch, consumables and hire charges for T & P)

Charges for Lifting, Loading, Trasportation and Unloading of iron materials. (Including cost of consumables and hire charges for T & P). (Iron materials will be supplied by TANGEDCO).

Charges for fabrication and erection of structurals supports. (Including cost of Consumables like gases, welding electrodes and hire charges for welding machine and T & P etc)

Charges for painting of structural materials with one coat of Red oxide paint. (Including Cost of paint).

Charges for painting of structural materials with 2 coats of enamel paint. (Including Cost of paint).

Charges for erection of cable tray as per schedule of rates for One (1) shift for (300mm). (Including cost of consumables and hire charges for T & P). (Cable tray will be supplied by TANGEDCO).

Charges for erection of Industrial type, IP 54 Protection 8 ways Three Phase Distribution board with sheet steel enclosure with 1 No 63 Amps four pole MCB as incoming and 12 Nos. 32 Amps double pole MCB as outgoing on wall with earth connection. (Including cost of Industrial Type TPMCB DB with IP54 Protection 8 ways 3 phase DB, 1 No. 63 Amps four pole MCB, 12 Nos. 32 Amps two pole MCB, consumables and hire charges for T & P).

De-Termination charges for 3½ Core x 70 Sq.mm LTUG. Aluminium armoured cable. (Including cost of consumables and hire charges for T & P).

De-Termination charges for 3½ Core x 240 Sq.mm LTUG. Aluminium armoured cable. (Including cost of consumables and hire charges for T & P).

Charges for releasing of 3 Core x 2.5 Sq.mm LTUG. Copper armoured cable.

Charges for releasing of 3½ Core x 35 Sq.mm LTUG. Aluminium armoured cable.

Charges for releasing of 3½ Core x 50 Sq.mm LTUG. Aluminium armoured cable.

Charges for releasing of 3½ Core x 70 Sq.mm LTUG. Aluminium armoured cable.

Charges for releasing of 3½ Core x 240 Sq.mm LTUG. Aluminium armoured cable.

Charges for relaying of 3 Core x 2.5 Sq.mm LTUG. Copper armoured cable.

Charges for relaying of 3½ Core x 35 Sq.mm LTUG. Aluminium armoured cable.

Charges for relaying of 3½ Core x 50 Sq.mm LTUG. Aluminium armoured cable.

Charges for relaying of 3½ Core x 70 Sq.mm LTUG. Aluminium armoured cable.

Charges for relaying of 3½ Core x 240 Sq.mm LTUG. Aluminium armoured cable.

Glanding & Termination charges for 3½ Core x 70 Sq.mm LTUG. Aluminium armoured cable. (Including cost of Lugs and cable gland).

Glanding & Termination charges for 3½ Core x 240 Sq.mm LTUG. Aluminium armoured cable. (Including cost of Lugs and cable gland).

Providing PCC 1:2:4 using OP/PP Cement with 12 to 20 mm machine crushed HBG metal including cost of all material, Labour, lead, lift, curing, etc., complete.

Charges for earthing as per PWD standard with an earth electrode of 2 metre Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work. (Including cost of materials, consumables and hire charges for T & P).

S. MURUGAN CONTRACTOR