Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.2 LAccepted-AOC C O GIVEN GOD NONGTDAU ARBUTHNOT ROAD NONGRIMMAW LAITUMKHRAH SHILLONG PIN 793011 | SHILLONG | EAST KHASI HILLS | MEGHALAYA | 793011 | L1 | Accepted-AOC Awarded | |
| 2 | L2₹46.8 L+₹3.6 L (8.30%)Rejected-Finance 7TH MILE UPPER SHILLONG P O NONGLYER SHILLONG MEGHALAYA | EAST KHASI HILLS | MEGHALAYA | 793009 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹47.1 L+₹3.8 L (8.90%)Rejected-Finance MAWBLEI MADANRTING SHILLONG 793 021 MEGHALAYA | EAST KHASI HILLS | MEGHALAYA | 793021 | L3 | Rejected-Finance Being L3 |
Tender Value
₹43.5 L
EMD Value
₹87,000
Closing Date
9 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Priyanka Tak GE I AF Shillong
GE (I) (AF) Shillong Elephant Falls Camp PO Nonglyer Shillong-793009
PROVISION OF DRAIN, RETAINING WALL AND PLINTH PROTECTION IN SMQ AREA AT HQ EAC (U) AF UNDER GE (I) (AF) SHILLONG
2024_MES_644341_2
8081/23/E8
Open Tender
Civil Works
Item Rate
270 days
GE I AF SHILLONG
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Yes
GE I AF SHILLONG
₹87,000
Yes
31 Aug 2024
18 Jun 2024
16 Jul 2024
18 Jun 2024
9 Jul 2024
25 Jun 2024
Amount
Excavating over areas, not exceeding 1.5 m deep and getting out soft/ loose soil complete all as specified.
Material and labour for hardcore of broken boulders or stones of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified.
Material and labour for walling random rubble uncoursed well bonded, bedded and solidly hearted built in cement mortar 1:6 as in retaining walls, wing walls, abutment and the likes complete all as specified. Note: Precast PCC bond stone will be measured and paid seperarely against item here-in-after
Material and labour for providing, cement concrete 1:3:6 type C1 using 20 mm graded crushed stone aggregates as in , copings, kneelers, apex stone, bed plates complete all as specified.
Material and labour for hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level with broken boulders/ stones complete all as specified.
Material and labour for raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:4 complete all as specified.
Extra over stone walling, random rubble brought upto courses, for hammer dressing to face stones and dressing of face beds and joints, with maximum depressions on face from straight edge held against the dressed surface not exceeding 40 mm on lime or sand stone complete all as specified.
Material and labour for PCC 1:2:4 type B1, 20 mm graded crushed stone aggregates as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in roof kerbs or mud stops, rounded or chamfered on edges, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified
Supply and fix as in repairs 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified. Make: Jain Irrigation/ Kisan/ Supreme/ Prince/ Reliance/ Oriplast Note: Quoted rate is deemed to be included for necessary Bend, Junction, branch piece, reducer and any other fittings required for fixing.
Returning filling in soft/loose soil, including, spreading, levelling, watering and well ramming in layers not exc. 25 cm complete all as specified and directed. NOTE : The top of filled excavation shall be made proud by using the excavated soil to cater for subsequent settlement of soil.
Removing excavated materials (soils) not exc 50.00mtr and depositing where directed at a level not exc 1.50 mtr above the starting point in soil, complete all as specified and as directed.
Material and labour for PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregates for 100 mm bore concrete bed to drain pipes including forming cradles; in complete all as specified.
Material and labour for PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregates for 150 mm bore concrete bed to drain pipes including forming cradles; in complete all as specified.
Cutting into 150 mm dia existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregates smooth finished, and reforming benching as required complete all as specified. Note: Each pipe length shall be 10 feet.
Cutting into 100 mm dia existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregates smooth finished, and reforming benching as required complete all as specified. Note: Each pipe length shall be 10 feet.
Material and labour for 20 mm thick rendering in two layers (12 mm + 8 mm) in cement mortar 1:4 on brick wall or concrete surfaces, finished the surfaces even and smooth without using extra cement with using approved LWPC as per manufacturer instruction complete all as specified. Note: LWPC shall be measured and paid including this item
Material and labour for reinforced cement concrete 1:1.5:3 (nominal mix) type A1 using 20 mm graded crushed stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified. Note: Formwork and reinforcement shall be measured and paid separately.
Material and labour for pre-cast cement concrete block masonry with solid blocks 1:2:4 type B1 20 mm graded crushed stone aggregates, as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and setting in cement mortar 1:4, complete all as specified. Note: Formwork shall be paid including this item but reinforcement shall be measured and paid separately.
Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; exceeding 200 mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified.
Material and labour for Mild steel TMT bars of Fe 500D, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for chainlink fencing and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified.
Material and labour for Mild steel TMT bars of Fe 500D, 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for chainlink fencing and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified.
Material and labour 75 mm thick PCC type C2, 1:3:6 using 40 mm graded crushed stone aggregates as in hard standing/plinth protection including finishing the concrete surface even & smooth without using extra cement and laid in alternate bay and maintained 1:12 slope complete all as specified.
Supply and fix as in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified. Make: Jain Irrigation/ Kisan/ Supreme/ Prince/ Reliance/ Oriplast Note: Quoted rate is deemed to be included for necessary Bend, Junction, branch piece, reducer and any other fittings required for fixing.
Material and labour for 75 mm PVC (SWR) vent cowl complete all as specified. Make: Jain Irrigation/ Kisan/ Supreme/ Prince/ Reliance/ Oriplast
Material and labour for 75 mm PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement complete all as specified. Make: Jain Irrigation/ Kisan/ Supreme/ Prince/ Reliance/ Oriplast
Material and labour for preparation of new wall surfaces and applying two coats of cement base paint over one coat of external primer paint complete all as specifies and directed
Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Material and labour for PCC 1:2:4 type B2, 40 mm graded crushed stone aggregates as in surface channels and drain complete all as specified
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified.
All as per Item No 27, add or deduct for each 25 mm girth or part thereof over or under 30 cm complete all as specified
Material and labour for 10 mm thick rendering in cement mortar 1:6 on fair faces of brick wall or concrete surfaces, finished the surfaces even and smooth without using extra cement complete all as specified.
Supply and fix 300 mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified.
Material and labour for PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregates as in Foundation, filling and mass concrete complete all as specified.
M/S BISWA CONSTRUCTION
S.M ENGINEERING AND CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .