Renovation of EI work of NDPS Court at Tamluk District Court, Purba Medinipur.

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed](Average run 8 mtr) [PWD/GS, Item No. 5), Page No. E. 15]

S&F 415 V, 16-32A per way, 4 way Horizontal TPN MCBDB with SS enclosure, double door with IP 42/43 protection concealed in wall after wall cutting and mending good the damages to original finish incl. interconnection with suitable size of Cu wire, neutral link and earthing attachment . (Make -legrand ) [PWD/GS Page No. D-10 Item No.: 4, D-6, Item No.: 7, D-5, It. No 6] Incoming - FP MCB Isolator 63A-1. Outgoing :10 A -32 A SPMCB-12 nos.

Supplying and fixing double-door(2+8 way) SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. Incoming - DPIsolator 32A -1, Outgoing 6 A -32 A SPMCB-8 nos (Make -Legrand ) [PWD/GS Page No.: D-9,6 Item No.: 13,7 ]

Supplying & Fixing MS fan clam of two piece type for RC ceiling asper approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWDSpecification Book – May 1991)

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. [PWD/GS Page: C-3 Item: 21/a]

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [PWD/GS Page: C-2 Item: 17]

Single fittings along with S/F of 1 no. 18-20 W LED lamp as per specification

Twin fittings along with S/F of 2 no. 18-20 W LED lamps as per specification

Dismaintaling the all old cables & all the old electrical line arrangement as per EIC.