Construction of Transit camp cum Field hostel at Firozabad S/s

Name of Package: Construction of Transit camp cum Field hostel at Firozabad S/s

Specification No.: 5002001514/OTHERS/DOM/K00 - NR3 RHQ -1

Estimate 16,633,498.00

: Schedules : General guidelines for filling up the Attachments

Specification No.: 5002001514/OTHERS/DOM/K00 - NR3 RHQ -1

Construction of Transit camp cum Field hostel at Firozabad S/s

1 Bidder may note that non-submission of Bid Form shall lead to outright rejection of their bid and no clarification shall be sought from them in this regard.

2 Fill up only green shaded cells in the relevent attachments.

3 Bid Form and Attachment-3, 4, 5, 5A, 6, 7, 8, 9, 10, 11 & 13 are enclosed here in this workbook.

4 Attachment-1 (Bid Security) : To be submitted as per proforma provided in the bidding document. Bid Security should remain valid for 250 days from the original date of Bid Opening of First Envelope.

5 Attachment-2 (Power of Attorney) : No specific format is provided by POWERGRID. Bidder may use their own format.

6 Integrity Pact : To be submitted in line with clause 6(j) of ITB, Volume-IA

7 Attachment: 12 (Declaration of Key Managerial Person and Power of Attorney holder) shall be submitted in the format provided separately in Volume-III of Bidding Documents. Bidders are required to sign and stamp the same and upload the scanned copy in line with provisions of bidding documents

8 Attachment: 14 (Format for Affidavit of Self certification regarding Minimum Local Content in line with PPP-MII order, 2017), if applicable, shall be submitted on a non-judicial stamp paper of Rs. 100/- in the format provided separately in Volume-III of the bidding documents.

9 Attachement: 15 (Certificate from statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of Local Content, in line with PPP-MII order, if applicable [to be submitted on the letter head of the issuer] in the format provided separately in Volume-III of the bidding documents. [NOT APPLICABLE]

10 Attachement: 16 (Compliance to the process related to the e-RA Terms & Conditions and the Business Rules governing the e-RA). [NOT APPLICABLE]

11 Attachement: 17 (Declaration regarding events encountered pursuant to ITB Clause 1.2)

12 Attachement: 18 (Certification by the Bidder per order no. F.No.6/18/2019-PPD dated 23/07/2020 issued by Public Procurement Division, Department of Expenditure, Ministry of Finance, Government of India (DoE Order) in line with ITB 2.1)

पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड

(भारत सरकार का उद्यम)

Power Grid Corporation of India Limited

(A Government of India Enterprises)

General Instruction to the Bidders for filling up this workbook of Bid Form and Attachments (1 to 17)

I While filling up the worksheets following may please be observed :

(i) Fill up only green shaded cells.

(ii) Certain data type entries have been restricted, such as Numeric values or limits of numeric values.

(iii) Select only the options provided in pull down menus.

(iv) Do not link any cell of this work book with any other work book.

(v) Do not use copy & paste or cut & paste options for filling up the data.

(vi) Do not fill the cell by dragging the other cell value in down or adjacent cell.

(vii) Do not reformat any of the cell of the work book.

II This Workbook consists of following worksheets :

Opening page of the workbook.

Names of Bidder :

● Select nos. of the JV Partners other than the Lead Partner from drop down menu.

● In case of JV partners more than 2, enter details of 3rd & more partners along with details of 2nd partner.

● Fill up names and address of the Sole Bidder. Do not leave this cell blank.

● Fill up date in dd-mmm-yyyy format from drop down menu.

● Click for Sch-1 given at the right top of the worksheet to go to Sch-1.

Sch-1 (Ex-works Prices) :

● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.

● Corresponding cell for mode of transaction shall be come enable only after filling up the unit rate, therefore first fill up the unit rate and then mode of transaction for the corresponding item.

● Select either Direct or Bought-out from the drop down menu. Do not leave the cell blank the same shall be deemed to be Bought-out if the cell is left blank.

● Total amount shall get calculated automatically.

● Type Test charges shall appear automatically after filling up Sch-7 appropriately.

Sch-2 (Freight & Insurance Charges) :

● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.

● Total amount shall get calculated automatically.

Sch-3 (Erection Charges) :

● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.

● Total amount shall get calculated automatically.

Sch-4 (Training Charges) :

● Not applicable, hence no cell is required to be filled up.

Sch-1A (Summary of Taxes and Duties applicable on the Item(s)/Materia(s)/Equipment(s)) :

● Fill up applicable rate of Excise Duty. The amount of Excise Duty on the items mentioned as Direct in the mode of transaction in Schedule-1 shall be calculated automatically at the rate mentioned by the bidder here.

● Segregate and fill up the amount on which Sales Tax shall be applicable out of Ex-works supply items mentioned as direct in the mode of transaction in Schedule-1. Applicable Excise Duty on this amount will be calculated automatically at the rate mentioned by the bidder. Further, fill up the rate of applicable Sales Tax. Amount of Sales Tax shall be automatically calculated on the amount mentioned by the bidder as subjected to Sales Tax plus applicable Excise Duty at the rate mentioned by the Bidder.

● Difference of total amount quoted by the bidder as Direct Transaction and the amount mentioned by him subjected to Sales Tax shall be considered as the amount on which VAT shall become applicable and the same shall be calculated & displayed automatically. Applicable Excise Duty on this amount at the rate mentioned by the bidder shall also be calculated & displayed automatically. Fill up the rate of applicable VAT. The amount of VAT shall be calculated automatically on the amount considered to be subjected to VAT plus applicable Excise Duty at the rate mentioned by the bidder here.

● Amount as per details filled up by the bidder in the work sheets Entry Tax, Octroi and other Taxes & Duties shall be displayed in this work sheet Sch-5 but will not be added to the grand total and shall be considered as applicable.

● Click at the links to go to the work sheets Entry Tax, Octroi and other Taxes & Duties one by one.

● Fill the description, amount and rate of applicable Entry Tax. Total of this worksheet shall be displayed in Sch -1A (Taxes & Duties)

● Click at the link to go back to Sch-1A.

● Fill the description, amount and rate of applicable Octroi. Total of this worksheet shall be displayed in Sch -1A (Taxes & Duties)

● Click at the link to go back to Sch-1A.

Other Taxes & Duties :

● Fill the description, amount and rate of applicable Other Taxes & Duties. Total of this worksheet shall be displayed in Sch -1A (Taxes & Duties)

● Click at the link to go back to Sch-1A.

● Summary of all the Schedules without considering discount (mentioned in the work sheet discount) shall be displayed automatically.

● No cell is required to be filled in by the bidder in this worksheet.

Sch-7 (Type Test Charges) :

● Fill up the rates & location where type tests are proposed.

● Total of this Sch-7 shall automatically appear in Sch-1.

Bid from 2nd Envelope :

● Fill up ref. no. as bidder's ref no. of this letter.

● This letter shall consider the net price as per Sch-2A.

● Fill up names & Designation of the representatives of bidder.

● Fill up additional information as required.

Happy Bidding !

Before filling up the Bid Form, the Bidder is required to fill up the details as under :

1 Enter Details of Amendments:

Amendments to Bidding Documents issued:

Specification No.: 5002001514/OTHERS/DOM/K00 - NR3 RHQ -1 Bid Proposal Form 1st Envelope

Bid Proposal Form (First Envelope)

Bid Proposal Reference:

Bidder's Address:

Contracts & Material Department

Power Grid Corporation of India Ltd

Northern Region Transmission System-3

3rd Floor, 12, Rana Pratap Marg the receipt of which is hereby acknowledged, we the undersigned, offer to execute the Works under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 6.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope (containing EMD and Techno-commercial part) and Second Envelope - Price Part (to be opened subsequently)

Lucknow - 226001 (Uttar Pradesh)

Name of Contract: Construction of Transit camp cum Field hostel at Firozabad S/s

Construction of Transit camp cum Field hostel at Firozabad S/s

1.0 Having examined the Bidding Documents, including Amendment Nos. dated 00/01/1900, the receipt of which is hereby acknowledged, we the undersigned, offer to execute the Works under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 6.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope (containing EMD and Techno-commercial part) and Second Envelope - Price Part (to be opened subsequently)

1.1 We, including any subcontractors or manufacturers for any part of the contract, do not have any conflict of interest in accordance with ITB clause 1.2.2 .

Our Bid, as said above have been submitted as per the followings: For Attachment-1, bidder has to fill the following data

EMD DETAIL FORM FALSE FALSE

2.0 Attachments to the Bid Form (First Envelope): Are you NSIC/MSME Registered: Yes No Select any one Option (Yes/No) We are NSIC/MSME registered under Public Procurement Policy for MSEs order 2012. We have enclosed a copy of NSIC Certificate reference no. dated DD-MM-YYYY and the issued certificate is valid upto and inclusive of DD-MM-YYYY. It is to confirm that the equipment(s)/item(s)/material(s) quoted in our bid is in the list of items indicated in NSIC certificate enclosed. We have submitted Bid Guarantee in the form of Bank Guarantee (Bank Guarantee No.-, dated DD-MM-YYYY issued from ) for a sum of Rupees /-, Valid for a period of 250 days from the original date of Bid Opening as per NIT i.e. upto and inclusive of DD-MM-YYYY. Select only one Option (Yes/No)

In line with the requirement of the Bidding Documents, we enclose herewith the following Documents / Attachments: Select the Form of EMD : Bank Guarantee Bank Guarantee No. Select any one Option (Yes/No)

2.1 Attachment-1: Bank Guarantee No. NSIC Certificate No.

Date of Issuance DD MM YYYY

Valid up to DD MM YYYY

Amount of EMD :

Name of Issuing Bank :

2.2 Attachment-2: Power of Attorney, duly notarized, indicating that the person(s) signing the bid has(ve) the authority to sign the bid and thus that the bid is binding upon the Bidder during full period of its validity, in accordance with ITB Clause 2

2.3 Attachment-3: The documentary evidence in terms of ITB Clause 6.3(c) for the qualification data has been furnished by us All the prices and the price components stated in our bid price are firm in accordance with provisions of the bidding documents. All the prices and other terms and conditions of this proposal are valid for a period of Six [06] calendar Months from the date of opening of the bid

2.4 Attachment-4: The variation and deviations from the requirements of the Conditions of Contract, Technical Specification and Drawings (excluding critical provisions as mentioned at clause 6.0 below) in your format enclosed with the Bidding Documents, including, inter alia, the cost of withdrawal of the variations and deviations indicated therein

2.5 Attachment-5: Information regarding ex-employees of Owner in our firm.

2.6 Attachment-5A: (Items, Components, Raw Material, Services proposed to be sourced from Micro and Small Enterprises): The details of the items, components, raw material, services which is proposed to bought/availed from Micro and Small Enterprises for the purpose of completion of works.

2.7 Attachment-6: Work Completion Schedule.

2.8 Attachment-7: Declaration Regarding Social Accountability

2.9 Attachment-8: Price Adjustment Data

2.10 Attachment-9 & 9-P: Integrity Pact

2.11 Attachment-10: Additional Information

2.12 Attachment-11: Declaration regarding Price Bid

2.13 Attachment-12: Declaration of Key Managerial Person and Power of Attorney holder

2.14 Attachment-13: (Information for E-payment, PF details and declaration regarding Micro/Small & Medium Enterprises)

2.15 Attachment-14 : Affidavit of Self certification regarding Minimum Local Content in line with PPP-MII order, 2017 and MoP order December 2018, if applicable.

2.16 Attachment-15: Certificate from statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of Local Content, in line with PPP-MII order, if applicable.

2.17 Attachment-16:Compliance to the process related to the e-RA Terms & Conditions and the Business Rules governing the e-RA

2.18 Attachment-17:Declaration regarding events encountered pursuant to ITB Clause 1.2

2.19 Attachment-18:Certification by the bidder as per DoE Order in line with ITB Clause 1.2.1

3.0 Second Envelope

In continuation of First Envelope of our Bid, we have submited the Second Envelope of the Bid, both of which shall be read together and in conjunction with each other, and shall be construed as an integral part of our Bid. Accordingly, Accordingly, we the undersigned, offer to execute the Works under the above-named package in full conformity with the said Bidding Documents for the sum specified in our Second Envelope Bid, in accordance with the terms & conditions of the Bidding Documents or such other sums as may be determined in accordance with the terms and conditions of the Bidding Documents. We hereby confirm that the total amout of our bid is in accordance with the prices quoted by us under different Heads, as detailed below:

i. Erection Charges excluding GST

4.0 Undertakings/Compliances

4.1 We are aware that, in line with Clause No. 17.1 (ITB), our Second Envelope (Price Bid) is liable to be rejected in case the same contains any deviation/omission from the contractual and commercial conditions and technical Specifications other than those identified in this First Envelope Bid

4.3 We declare that as specified in Clause 5.7, ITB, Vol.-IA of the Bidding Documents, prices quoted by us are fixed & firm and shall not be subject to any adjustment during performance of the contract

4.5 We declare that items left blank in the Schedules will be deemed to have been included in other items. The TOTAL for each Schedule and the TOTAL of Grand Summary shall be deemed to be the total price for executing the Works and sections thereof in complete accordance with the Contract, whether or not each individual item has been priced

4.6 We confirm that except as otherwise specifically provided our Bid Prices in Second Envelop (Price Bid) include all taxes, duties, levies and charges as may be assessed on us, our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Works, in and outside of India

4.7 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN in all the states where the project is located and the states from which we shall make our supply of goods.

4.8 100% of applicable Taxes and Duties i.e. GST which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents.

4.9 We further understand that notwithstanding 4.0 above, in case of award on us, you shall also bear and pay/reimburse to us, GST in respect of Supply of Services by us to you, by the Indian Laws.

5.0 Construction of Contract

5.1 We declare that we have studied clause GCC 12 relating to mode of contracting for Domestic Bidders and we are making this proposal with a stipulation that you shall award us the Contracts covering all goods and related services

6.0 We have read the provisions of following clauses and confirm that the specified stipulations of these clauses are acceptable to us: GCC Clause 8 & SCC Clause 13 (Taxes, duties and levies/Contract Price) GCC Clause 14 & SCC Clause 18 (Contract Performance Guarantee), GCC Clause 18 & SCC Clause 4 (Time the essence of Contract/Completion Schedule/Period), GCC Clause 26.5 (Patents & Royalties), GCC Clause 45 (Guarantee), GCC Clause 46 (Defect Liability Period), GCC Clause 64 & SCC Clause 15 (Payment on Account/Terms of payment), GCC Clause 66 & SCC Clause 14 (Contract Price adjustment / Price Variation/ adjustment), GCC Clause 69 (Arbitration & laws), GCC Clause 70 (Laws & jurisdiction of Contract)

7.0 We conform that we stand committed to comply with all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records

8.0 We undertake, if our bid is accepted, to commence the work immediately upon your Notification of Award to us, and to achieve the Completion of the Works within the time stated in the Bidding Documents

9.0 If our bid is accepted, we undertake to provide Performance Security in the form and amount, and within the time specified in the Bidding Documents

10.0 We agree to abide by this bid for a period of 180 (One Hundred Eighty) days from the date fixed for opening of First Envelope bids as stipulated in the Bidding Documents, and it shall remain binding upon us and may be accepted by you at any time before the expiration of that period.

11.0 Until a formal Contract is prepared and executed between us, this bid, together with your written acceptance thereof in the form of your Notification of Award shall constitute a binding contract between us.

12.0 We understand that you are not bound to accept the lowest or any bid you may receive.

13.0 Commissions or gratuities, if any, paid or to be paid by us to agents relating to this Bid, and to contract execution, if we are awarded the contract, are listed below:

YES Name & Address of agent Amount & Currency Purpose of Commission or Gratuity TRUE

14.0 We hereby declare that only the persons or firms interested in this proposal as principal or principals are named herein and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if we are awarded the contract, that this proposal is made without any connection with any other person, firm or party like-wise submitting a proposal and that this proposal is in all respects for and in good faith, without collusion or fraud.

Thanking you, we remain,

Yours faithfully,

For & On Behalf of

Date: DD MM YYYY Name:

Place: Designation:

Business Address: ……………………………………………………………………….

Name of Principal Officer:

Address of Principal Officer:

Note: (Written power of Attorney of Signatories of bid to commit the Bidder must be enclosed with the bid. Bidders may use their own proforma for furnishing the required information with the bid)

Specification No.: 5002001514/OTHERS/DOM/K00 - NR3 RHQ -1 Attachment-3

Construction of Transit camp cum Field hostel at Firozabad S/s

[DOCUMENTS IN SUPPORT OF MEETING THE SPECIFIED QUALIFYING REQUIREMENT]

Bidder's Address:

Contracts & Materials (NR-III RHQ)

Power Grid Corporation of India Ltd.,

3rd Floor, 12, Rana Pratap Marg

Lucknow - 226001 (Uttar Pradesh)

We submit the required documents/information as per clause ITB 6.3(c) as below:

S No. Particulars For Individual Firm

1 Name of the Firm 01 01 2000

2 Head Office/ Registered Office Address 02 02 2001

3 Telephone 03 03 2002

5 Contact Person 05 05 2004

6 Place of Incorporation/ Registration 06 06 2005

7 Year of Incorporation/ Registration 07 07 2006

8 Nationality of 08 08 2007

Owner (i) 09 09 2008

Owner (ii) 10 10 2009

Owner (iii) 11 11 2010

[Necessary documents to eatablish legal status of the bidder should be uploaded with the bid] 12 12 2011

A1. Average Annual Turnover 13 2012

Sr. No. Financial Year Turnover* (in Rs.Crore) Documents submitted in support of Turnover 14 2013

Average of Best 3 #NUM! 21 2020

* Note- Annual total income as incorporated in the profit & loss account except non-recurring income, i.e., sale of fixed assets.

Sr. No. Financial Year Networth (in Rs. Lakh)

A3. Liquid Assets/evidence of access to or availability of credit facilities

Sr. No. Description in Rs. Lakh Documents submitted in support of Liquid Assets/Access to or availability of credit facilities

1 Liquid Assets/Access to or availability of credit facilities

B. Work Experience Details as on originally scheduled date of Bid Opening i.e. on 30.12.2020 23

S. No. Description Work #1 Work #2 Work #3 24

a Name & details of the Work 25

b Ref. No. of Award Letter/Contract/WO 26

c Date of Award Letter/Contract/WO (in dd-mm-yyyy format) dd mm yyyy dd mm yyyy dd mm yyyy 27

d Name of the Client with Contact details 28

e Value of Work as per Award Letter/Contract/WO 29

f Value of Work as per Final Execution 30

g Scheduled Date of Completion as per the Contract (in dd-mm-yyyy format) dd mm yyyy dd mm yyyy dd mm yyyy 31

h Date of actual Completion (in dd-mm-yyyy format) dd mm yyyy dd mm yyyy dd mm yyyy

i Copy of Award Letter/Contract/WO enclosed: (YES/NO)

k Reference Details of Completion Certificate/Performance Certificate/Any Other document like Acceptance of Final Bill by client issued by the client

k1 Ref. No. of Completion/Performance Certificate

k2 Date of issue of Completion/Performance Certificate (in dd-mm-yyyy format) dd mm yyyy dd mm yyyy dd mm yyyy

k3 Name and Designation of person issuing Completion/Performance Certificate

k4 Name of Company/Client who have issued Completion/Performance Certificate

k5 Name of work as per Completion/Performance Certificate

k6 Date of actual Completion as per Completion/Performance Certificate (in dd-mm-yyyy format) dd mm yyyy dd mm yyyy dd mm yyyy

k7 Amount of final work as per Completion/Performance Certificate

k8 Copy of Completion/Performance Certificate attached/enclosed: (YES/NO)

k9 File name by which Completion/Performance Certificate is attached/uploaded YES

C. Status of Firm (Proprietary/ Partnership/ Pvt. Ltd. Company/Public Ltd. Company)

Status of Firm Document Submitted Yes

No Affidavit for Proprietorship

Partnership Deed

D Other Documents Certificate of Incorporation

i PAN Detail Copy of PAN Card Submitted (Y/N)

ii Copy of Partnership Deed/ affidavit for Proprietorship/ Company MoA and AoA or Certificate of Incorporation, as applicable submitted (Y/N)

Date: DD-MM-YYYY Name: 0 Pvt. Ltd. Company

Place: 0 Designation: 0 Public Ltd. Company

Specification No.: 5002001514/OTHERS/DOM/K00 - NR3 RHQ -1 Attachment-4

Construction of Transit camp cum Field hostel at Firozabad S/s

[ALTERNATIVE, DEVIATIONS AND EXCEPTIONS TO THE PROVISIONS]

Bidder's Address:

Contracts & Material Department, Northern Region-III

Power Grid Corporation of India Ltd

Northern Region-III Headquarters,

3rd Floor, 12, Rana Pratap Marg

Lucknow - 226001 (Uttar Pradesh)

Irrespective of whatever has been stated to the contrary anywhere else in our offer, only following are the deviations and variations from and exception to the specifications and tender documents for the above mentioned subject work. These deviations and variations are exhaustive. Except for these deviations the entire work shall be performed as per your specifications and other tender documents. Further, we agree that additional conditions, if any, found in our offer other than those stated below, save that pertaining to any rebates offered shall not be given effect to

Sl. No. Ref. of page, Clause & Name of Documents Description of Deviation Cost of withdrawal (Rs.)

Date: DD-MM-YYYY Name: 0

Place: 0 Designation: 0

Tender Enquiry No: 0 Attachment-4

[ALTERNATIVE, DEVIATIONS AND EXCEPTIONS TO THE PROVISIONS]

Sl. No. Ref. of page, Clause & Name of Documents Description of Deviation Cost of withdrawal (Rs.)

Date: DD-MM-YYYY Name: 0

Place: 0 Designation: 0

Tender Enquiry No: 0 Schedule-4

Construction of Transit camp cum Field hostel at Firozabad S/s

[Technical Deviations Schedule]

Bidder's Address:

The following are the Technical deviations and variations from and exceptions to the specifications and documents for the subject package. These deviations and variations are exhaustive. Except these deviations, the entire work shall be performed as per your specifications and document.

Sl. No. Vol./ Clause Ref/ Page No. As Specified in the specification Technical Deviation & Variations/Exceptions

Date: DD-MM-YYYY Name: 0

Place: 0 Designation: 0

Tender Enquiry No: 0 Schedule-4

[Technical Deviations Schedule]

Sl. No. Vol./ Clause Ref/ Page No. As Specified in the specification Technical Deviation & Variations/Exceptions

Date: DD-MM-YYYY Name: 0

Place: 0 Designation: 0

Tender Enquiry No: 0 Schedule-4A

Construction of Transit camp cum Field hostel at Firozabad S/s

[ Deviations on important/critical conditions along with their withdrawal price]

Bidder's Address:

The following are the deviations/variations/exceptions to the provisions of important conditions stipulated in Conditions of Contract, Vol-I. We undertake to execute the contract in line with the provisions of Bidding Documents in respect of above said clauses in case POWERGRID agree to pay- us the withdrawal price indicated below against each such deviations/ variations/ exceptions.

Sl. No. Vol./ Section Clause No./ Page No. Deviations/Variations/Exceptions Withdrawal Price (INR)

Date: DD-MM-YYYY Name: 0

Place: 0 Designation: 0

Tender Enquiry No: 0 Schedule-4A

[ Deviations on important/critical conditions along with their withdrawal price]

Sl. No. Vol./ Section Clause No./ Page No. Deviations/Variations/Exceptions Withdrawal Price

Date: DD-MM-YYYY Name: 0

Place: 0 Designation: 0

Specification No.: 5002001514/OTHERS/DOM/K00 - NR3 RHQ -1 Attachment-5

Construction of Transit camp cum Field hostel at Firozabad S/s

[ Information regarding Ex-employees of POWERGRID in our Firm]

Bidder's Address:

Contracts & Material Department, Northern Region-III

Power Grid Corporation of India Ltd

Northern Region-III Headquarters,

3rd Floor, 12, Rana Pratap Marg

Lucknow - 226001 (Uttar Pradesh)

We hereby furnish the details of ex-employees of POWERGRID who had retired/resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us.

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID (DD-MM-YYYY) Date of joining and designation in our organisation

Date: DD-MM-YYYY Name: 0

Place: 0 Designation: 0

Specification No.: 5002001514/OTHERS/DOM/K00 - NR3 RHQ -1 Attachment-5A

Construction of Transit camp cum Field hostel at Firozabad S/s

[ Items, Components, Raw Material, Services Proposed to be sourced from Micro and Small Enterprises]

Bidder's Address:

Contracts & Material Department, Northern Region-III

Power Grid Corporation of India Ltd

Northern Region-III Headquarters,

3rd Floor, 12, Rana Pratap Marg

Lucknow - 226001 (Uttar Pradesh)

We hereby furnish the details of the items, components, raw material, services which we propose to buy/avail from Micro and Small Enterprises(MSEs) for the purposes of completion of works under the subject package:

Sl. No. Item Description Quantity proposed to be bought/ sub-contracted Name of Micro and Small Enterprises

Name & Address Category (Micro or Small)

The above is a list of items we propose to procure from MSEs. However, based on the situations during the executions of the contract, the above list may undergo changes. We hereby confirm that the details regarding actual procurement from MSEWs carried out by us, as per the format provided at ANNEXURES-(ANNEX)-VOL-I of the bidding document, shall be submitted along with the bills for payment against supplies made/works done during execution of contract.

Date: DD-MM-YYYY Name: 0

Place: 0 Designation: 0

Specification No.: 5002001514/OTHERS/DOM/K00 - NR3 RHQ -1 Attachment-5A

Construction of Transit camp cum Field hostel at Firozabad S/s

[ Items, Components, Raw Material, Services Proposed to be sourced from Micro and Small Enterprises]

Sl. No. Item Description Quantity proposed to be bought/ sub-contracted Name of Micro and Small Enterprises

Name & Address Category (Micro or Small)

Date: DD-MM-YYYY Name: 0

Place: 0 Designation: 0

Specification No.: 5002001514/OTHERS/DOM/K00 - NR3 RHQ -1 Attachment-6

Construction of Transit camp cum Field hostel at Firozabad S/s

[ Work Completion Schedule]

Bidder's Address:

Contracts & Material Department, Northern Region-III

Power Grid Corporation of India Ltd

Northern Region-III Headquarters,

3rd Floor, 12, Rana Pratap Marg

Lucknow - 226001 (Uttar Pradesh)

The Schedule for completion of various activities shall be as under:

Sl. No. Name of Activity Period from Date of LOA

Commencement Completion

Date: DD-MM-YYYY Name: 0

Place: 0 Designation: 0

Specification No.: 5002001514/OTHERS/DOM/K00 - NR3 RHQ -1 Attachment-7

Construction of Transit camp cum Field hostel at Firozabad S/s

[ Declaration regarding Social Accountability]

Bidder's Address:

Contracts & Material Department, Northern Region-III

Power Grid Corporation of India Ltd

Northern Region-III Headquarters,

3rd Floor, 12, Rana Pratap Marg

Lucknow - 226001 (Uttar Pradesh)

We conform that we stand committed to comply all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records.

Date: DD-MM-YYYY Name: 0

Place: 0 Designation: 0

Specification No.: 5002001514/OTHERS/DOM/K00 - NR3 RHQ -1 Attachment- 8

Construction of Transit camp cum Field hostel at Firozabad S/s

(Price Adjustment Data)

Bidder's Address:

Bidder’s name & Address: To

Name : Contracts & Materials Department

Power Grid Corporation of India Limited

Address : #REF! Northern Region Transmission System-III

#REF! 3rd Floor, 12, Rana Pratap Marg,

Lucknow-226001 (Uttar Pradesh)

We hereby furnish the relevant details pertaining to the price adjustment provisions for items as specified in your specifications and documents for the Construction of Transit camp cum Field hostel at Firozabad S/sThe necessary documentary evidence are enclosed :

Sl. No. Name of Materials/Labour Name of the published index Value of index (30 days prior to date of opening of bids)

1 Supply & Placement of Reinforcement Steel

A High Speed Diesel coefficient Wholesale Price Index Number for ‘High Speed Diesel’ (Individual commodity) (monthly) (Base: 2004-05=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).

L Labour coefficient Indian Labour Bureau, Shimla, Govt. of India (monthly) (Base: 2001 = 100) (www.labourbureau.nic.in)

B Ferrous Metals coefficient Wholesale Price Index Number for ‘Ferrous Metals’ (Group Item) (monthly) (Base: 2004-05=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).

2 For Concreting

A High Speed Diesel, coefficient a = Wholesale Price Index Number for High Speed Diesel’ (Individual commodity) (monthly) (Base: 2004-05=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).

L Labour, coefficient l = Indian Labour Bureau, Shimla, Govt. of India (monthly) (Base: 2001 = 100) (www.labourbureau.nic.in)

B Cement & Lime, coefficient b = Wholesale Price Index Number for ‘Cement & Lime’ (Group Item) (monthly) (Base: 2004-05=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).

C Structural Clay Products coefficient Wholesale Price Index Number for ‘Structural Clay Products’ (Group Item) (monthly) (Base: 2004-05=100) as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in).

The Bidders are required to indicate the value of indices for various components as of 30 days prior to the date of bid opening. In case bid opening date is extended after submission of bids because of any reason, indices as of 30 days prior to actual date of bid opening shall be considered for placement of award and for payment towards price adjustment.

Date : DD-MM-YYYY Printed Name : 0

Place : 0 Designation : 0

Specification No.: 5002001514/OTHERS/DOM/K00 - NR3 RHQ -1 Attachment-9

Construction of Transit camp cum Field hostel at Firozabad S/s

Bidder’s name & Address:

Address : #REF! #REF!

Contracts & Materials Department

Power Grid Corporation of India Limited

Northern Region Transmission System-III

3rd Floor, 12, Rana Pratap Marg,

Lucknow-226001 (Uttar Pradesh)

Format of Integrity Pact is enclosed in Volume-III of the bidding document

Date : DD-MM-YYYY Printed Name : 0

Place : 0 Designation : 0

Specification No.: 5002001514/OTHERS/DOM/K00 - NR3 RHQ -1 Attachment- 10

Construction of Transit camp cum Field hostel at Firozabad S/s

(Additional Information)

Bidder's Name & Address:

Address : #REF! #REF! #REF! #REF!

Contracts & Materials Department

Power Grid Corporation of India Limited

Northern Region Transmission System-III

3rd Floor, 12, Rana Pratap Marg,

Lucknow-226001 (Uttar Pradesh)

We have enclosed with our proposal the following additional information for the subject package:

1.0 Litigation History

The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years. A consistent history of awards involving litigation against the Bidder or any partner of JV may result in rejection of Bid. [Reference ITB clause 6.3 (k)]

1.1 Details of litigation history resulting from Contracts completed or under execution by the bidder over the last five years. A consistent history of awards invlolving litigation against the Bidder or any patner of JV may result in rejection of Bid. [(Refer ITB Clause 6.3 (k)]

Year Name of client, cause of litigation/arbitration and matter in dispute Details of Contract and date Award for or against the bidder Disputed amount

2 Details regarding previous transgressions of Integrity Pact

The bidder should provide detailed information on any transgression of Integrity Pact that occurred in the last 10 years with any other Public Sector Undertaking or Government department or any other Company, in any country.

Year Name of Client Details of Transgression of Integrity Pact by the bidder

3 Current Contract Commitments of works in progress

Bidders should provide information on their current commitments on all contracts that have been awarded, or for which a letter of intent or acceptance has been received, or for contracts approaching completion, but for which an unqualified, full completion certificate has yet to be issued.

Details of Contract Value of outstanding work (Rs.) Estimated completion date

Date: DD-MM-YYYY Printed Name : 0

Place:. 0 Designation : 0

Specification No.: 5002001514/OTHERS/DOM/K00 - NR3 RHQ -1 0 Attachment- 10

Construction of Transit camp cum Field hostel at Firozabad S/s

(Additional Information)

Bidder's Name & Address:

Contracts & Materials Department

Power Grid Corporation of India Limited

Northern Region Transmission System-III

3rd Floor, 12, Rana Pratap Marg,

Lucknow-226001 (Uttar Pradesh)

We have enclosed with our proposal the following additional information for the subject package:

S. No. Brief description of Information Ref. and Page No.

Note: The Bidder should accordingly upload the scanned copies of the relevant documents (Refer Clause 6.3 of ITB, Volume - IA of bidding documents).

Date: DD-MM-YYYY Printed Name : 0

Place:. 0 Designation : 0

Specification No.: 5002001514/OTHERS/DOM/K00 - NR3 RHQ -1 Attachment-11

Construction of Transit camp cum Field hostel at Firozabad S/s

[ Declaration Regarding Price Bid]

Bidder's Address:

Contracts & Material Department, Northern Region-III

Power Grid Corporation of India Ltd

Northern Region-III Headquarters,

3rd Floor, 12, Rana Pratap Marg

Lucknow - 226001 (Uttar Pradesh)

Further, we hereby confirm that except as mentioned in the Attachment-2 (Alternative, Deviations and Exceptions to the Provisions) hereof and/or the Covering Letter, forming part of Envelope-II of our bid

(i) there are no discrepancies/inconsistencies and deviations/omissions/ reservations to the Bidding Documents, in the Envelope-III bid

We also confirm that in case any discrepancies/inconsistencies and deviations/ omissions/reservations, as referred to in para (i) and (ii) above, is observed in the Second Envelope, the same shall be deemed as withdrawn/rectified without any financial implication, whatsoever to POWERGRID. However, in case of any arithmetical errors, the same shall be governed as per the provisions of ITB Sub-clause 17

Date: DD-MM-YYYY Name: 0

Place: 0 Designation: 0

Specification No.: 5002001514/OTHERS/DOM/K00 - NR3 RHQ -1 ATTACHMENT-13

Construction of Transit camp cum Field hostel at Firozabad S/s

(Information for E-payment, PF details and declaration regarding Micro/Small & Medium Enterprises)

Bidder’s Name and Address (Sole Bidder) : To:

Contracts & Materials Deptt

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 3rd Floor

12 Rana Pratap Marg

Lucknow-226001 (UP)

I We are furnishing the following details of Statutory Registration Numbers and details of Bank for electronic payment.

1. Name of the Supplier/ Contractor in whose favour payment is to be made 0

2. Address with PIN Code and State

Registered Office:

Correspondence Address:

3. (a) Status – Company/others

[Declaration of Micro/ Small/ Medium Enterprise under Micro/ Small & Medium Enterprises Development Act 2006, if applicable]

3. (b) Are you a MSE owned by SC/ST* entrepreneurs in line with Public Procurement Policy for Micro & Small Enterprises (MSEs) order 2012 including subsequent Amendment/notification/order (Indicate Yes/No) Yes (Documentary Evidence attached)

Note: Documentary Evidence is to be attached. Please refer remarks at the end of Attachment. No

3. (c ) If 3(b) is 'Yes', please mention whether you are (Proprietary MSE/Private Limited Company) owned by SC/ST Entrepreneurs

3. (d) Are you a MSE owned by Women in line with Public Procurement Policy for Micro & Small Enterprises (MSEs) order 2012, Public Procurement Policy for Micro & Small Enterprises (MSEs) Amendment order 2018 including subsequent Amendment/notification/order (Indicate Yes/No)

Note: Documentary Evidence is to be attached.

4. Permanent Account (PAN) No.

5. GSTIN Numbers

6. GSTIN in the States/UT from where the Supply of Goods takes place

Name of States/UT GSTIN No.

GSTIN in the States/UT from where the Supply of Services takes place (States where the site under the subject package is situated)

Name of States/UT GSTIN No.

9. PF Registration No. of the Company

10. PF Regional Office covered (with Address)

11. Name of Contact Person

12. Telephone No(s)

13. Bank Details for Electronic Payment

Name of the Bank:

Address of Branch:

Type of Account:

Type of Account: Current Account

14. 9 digit MICR code printed at bottom in middle, next to cheque no.

15. IFSC (for RTGS)/NEFT Code (to be obtained from the Bank) Sample Cancelled Cheque to be enclosed

We hereby declare that the above information are true and correct and we agree that the payment on account of this Contract, in the event of award, be made in the above account maintained in the above mentioned Bank.

* The definition of MSEs owned by SC/ST is as given under:

a. In case of proprietary MSE, proprietor(s) shall be SC/ST.

b. In case of partnership MSE, the SC/ST partners shall be holding atleast 51% shares in the unit.

c. In case of Private Limited companies, atleast 51% share shall be held by SC/ST promoters.

Documentary evidence: Please provide scanned copy(ies) of the SC/ST certificates issued by District Authority as applicable for SC/ST MSE category as per (a), (b) or (c ) above.

Date : DD-MM-YYYY Printed Name : 0

Place : 0 Designation : 0

DSR 2018 Item No Item Description Unit Qty

PART - A - SCHEDULE ITEMS:

1.AA 1.1.2 Carriage of material By Mechanical Transport including loading ,unloading and stacking upto 1 kmEarth Cu.m. 100.000

1.AB 2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.All kinds of soil Cu.m. 600.000

1.AC 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. Cu.m. 5.000

1.AD 2.10.1.1 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :Pipes, cables etc, not exceeding 80 mm dia. mtrs 10.000

1.AE 2.10.1.2 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. mtrs 10.000

1.AF 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cu.m. 495.000

1.AG 2.26.1 Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or stacked materials.All kinds of Soil Cu.m. 150.000

1.AH 2.27 Supplying and filling in plinth with Jamuna sand under floors including watering, ramming consolidating and dressing complete. Cu.m. 30.000

1.AJ 2.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50m outside the periphery of the area cleared. sqm 500.000

1.AK 2.34.1 Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos - Lindane emulsifiable concentrate of 20% Litres 160.000

1.AL 2.35.3.1 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration sqm 270.000

1.AM 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) cum 2.000

1.AN 4.2.3 Providing and laying cement concrete in retaining walls, return walls,walls (any thickness) including attached pilasters, columns, piers,abutments, pillars, posts, struts, buttresses, string or lacing courses,parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor etc., up to floor five level, excluding the cost of centering,shuttering and finishing:1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) Cu.m. 3.000

1.AP 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 cement:4 coarse sand:8 graded stone aggregate:40mm nominal size) Cu.m. 102.000

1.AQ 4.11 Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size). sqm 35.000

1.AR 4.12 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. per 50kg cement 10.000

1.AS 4.17 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. sqm 65.000

1.AT 5.33.1 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering,shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.All works upto plinth level Cu.m. 105.000

1.AU 5.33.2 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering,shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.All works above plinth level upto floor V level Cu.m. 140.000

1.AV 5.9.1 Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete Sq.m. 125.000

1.AW 5.9.3 Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform Sq.m. 575.000

1.AX 5.9.5 Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers & cantilevers Sq.m. 440.000

1.AY 5.9.6 Centering and shuttering including strutting, propping etc. and removal of form for Columns, pillars, piers abutments posts & struts Sq.m. 500.000

1.AZ 5.9.7 Centering and shuttering including strutting, propping etc. and removal of form for Stairs ,excluding landings, except spiral staircases. Sq.m. 60.000

1.BA 5.9.14 Centering and shuttering including strutting, propping etc. and removal of form for :Extra for shuttering in circular work (20% of respective centering and shuttering items) Sq.m. 20.000

1.BB 5.9.15 Centering and shuttering including strutting, propping etc. and removal of form for Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like Sq.m. 30.000

1.BC 5.9.19 Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, chajjas, corbels etc. including edges. Sq.m. 10.000

1.BD 5.9.17 Centering and shuttering including strutting, propping etc. and removal of form for Cornices & mouldings Sq.m. 15.000

1.BE M 5.22.6 &5.22A.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and above plinth Thermo-Mechanically Treated bars. kilogram 19000.000

1.BF 5.30 Add - Deduct for plaster drip course-groove in plastered surface or moulding to RCC projections. Mtr. 40.000

1.BG 6.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 15.000

1.BH 6.4.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 80.000

1.BJ (ITEM MAY BE READ AS 6.13.2 IN SRM PORTAL RFX) 6.13.2 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) Sq.m. 500.000

1.BK 6.15 Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry. Sq.m. 380.000

1.BL 7.38.1.1 Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand),including pointing in white cement with an admixture of pigment to match the stone shade.8mm thick (mirror polished and machine cut edge) Granite stone of any colour and shade Sq.m. 20.000

1.BM 8.2.2.1 Providing and fixing 16mm -18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc.Granite of any colour and shade, complete at all levelsArea of slab upto 0.50 Sq. m. Sq.m. 22.000

1.BN 8.2.2.2 Providing and fixing 16mm- 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc.Granite of any colour and shade Area of slab over 0.50 Sq. m. Sq.m. 30.000

1.BP 8.4 Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. metre 30.000

1.BQ 8.5 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. each 12.000

1.BR 9.1.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Second class teak wood Cu.m. 1.000

1.BS 9.96.1 Providing and fixing aluminium sliding door bolts ISI marked anodised ,anodic coating not less than grade AC 10 as per IS-1868, transparent or dyed to required colour or shade with nuts and screws etc. complete:300 x 16 mm Each 30.000

1.BT 9.96.2 Providing and fixing aluminium sliding door bolts ISI marked anodised ,anodic coating not less than grade AC 10 as per IS-1868, transparent or dyed to required colour or shade with nuts and screws etc. complete:250 x 16 mm Each 12.000

1.BU 9.97.1 Providing and fixing aluminium tower bolts ISI marked anodised ,anodic coating not less than grade AC 10 as per IS-1868, transparent or dyed to required colour or shade with necessary screws etc. complete:300 X 10 mm Each 10.000

1.BV 9.97.2 Providing and fixing aluminium tower bolts ISI marked anodised ,anodic coating not less than grade AC 10 as per IS-1868, transparent or dyed to required colour or shade with necessary screws etc. complete:250 X 10 mm Each 12.000

1.BW 9.97.4 Providing and fixing aluminium tower bolts ISI marked anodised ,anodic coating not less than grade AC 10 as per IS-1868, transparent or dyed to required colour or shade with necessary screws etc. complete:150 X 10 mm Each 12.000

1.BX 9.100.1 Providing and fixing aluminium handles ISI marked anodised anodic coating not less than grade AC 10 as per IS-1868, transparent or dyed to required colour or shade with necessary screws etc. complete.125 mm- for Doors Each 12.000

1.BY 9.100.2 Providing and fixing aluminium handles ISI marked anodised anodic coating not less than grade AC 10 as per IS-1868, transparent or dyed to required colour or shade with necessary screws etc. complete.100 mm-for Cup boards Each 55.000

1.BZ 9.101.2 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.Twin rubber stopper Each 25.000

1.CA 9.113 Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge. Each 25.000

1.CB 9.120.1 Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture.M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat30 mm thick plain PVC door shutters and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. Sqm 15.000

1.CC 9.131.1 Providing and fixing factory made shutters of Pre-laminated particle board flat pressed three layer or graded wood particle board with one side decorative finish and other side balancing lamination conforming to IS:12823 Grade l Type ll, of approved design, and edges sealed with water resistant paint and lipped with aluminium 'U' type edge beading allround the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws, including fixing of aluminium hinges 100x63x4 mm etc. complete as per architectural drawing and direction of Engineer-in-25 mm thick Charge (Cost of 'U' beading and hinges will be paid for separately). Sq.m. 50.000

1.CD 9.132 Providing and fixing aluminum U beading of required size to Pre-laminated/flush door shutter, including fixing etc. complete as per direction of Engineer-in-charge. Kg 30.000

1.CE 10.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angles 40x40x6 mm for diagonal braces Sq.m. 2.000

1.CF 10.18 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 12mm dia M.S. bar bent to shape as per standard drawing. Each 40.000

1.CG 10.25.2 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bars, ladders, railings, brackets, gates and similar works. Kgs. 3200.000

1.CH 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge,(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Kgs. 100.000

1.CJ 11.23.5 Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :Udaipur green marble sqm 130.000

1.CK 11.24 Extra for pre finished nosing to treads of steps of marble stone. metre 48.000

1.CL 11.56.1 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. Sq.m. 30.000

1.CM 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete Sq.m. 200.000

1.CN 11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4Coarse sand) including pointing the joints with white cement and matching pigment etc., complete Sq.m. 60.000

1.CP 11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm Sq.m. 360.000

1.CQ 11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make in all colours & shade in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm Sq.m. 70.000

1.CR 12.21.1 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :In 75x75 mm deep chase metre 90.000

1.CS 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. each 7.000

1.CT M12.41.2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes including coupler conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes: 110mm diameter metre 40.00

1.CU 12.42.5.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Bend 87.5,110 mm bend Shoe ,Plain, Each 7.000

1.CV 12.42.6.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Shoe 110 mm Each 7.000

1.CW 12.43.2 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm Each 70.000

1.CX 12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diametre and weighing not less than 440 grams. Each 7.000

1.CY 12.52.2 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Sq.m. 20.000

1.CZ 13.4.2 12 mm cement plaster of mix1:6 (1 cement - 6 coarse sand) Sq.m. 1300.000

1.DA 13.5.1 15 mm cement plaster on rough side of single or half brick wall of mix:1:4 (1 cement: 4 coarse sand) Sq.m. 600.000

1.DB 13.7.2 12 mm cement plaster finished with a floating coat of neat cement of mix1:4 (1 cement: 4 fine sand) Sq.m. 450.000

1.DC 13.16.1 6mm cement plaster to ceiling of mix1:3 (1 Cement:3 Fine sand) Sq.m. 475.000

1.DD 13.42.1 Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.Two or more coats on new work Sq.m. 1700.000

1.DE 13.43.1 Applying one coat of cement primer of approved brand and manufacture on wall surfcaeWater thinnable cement primer. Sq.m. 1700.000

1.DF 13.47.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Sq.m. 600.000

1.DG 13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. Sq.m. 100.000

1.DH 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Sq.m. 2600.000

1.DJ 16.1 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. Sq.m. 550.000

1.DK 16.3.1 Supplying and stacking at site.90 mm to 45 mm size stone aggregate Cum 66.000

1.DL 16.3.2 Supplying and stacking at site.63 mm to 45 mm size stone aggregate Cum 66.000

1.DM 16.3.3 Supplying and stacking at site.53 mm to 22.4 mm size stone aggregate Cum 66.000

1.DN 16.3.6 Supplying and stacking at site.Stone screening 13.2 mm nominal size (Type A Cum 33.000

1.DP 16.4 Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . Cum 165.000

1.DQ 16.45 Providing and fixing in position pre-moulded joint filler in expansion joints. per cm depth per cm width per m length 1350.000

1.DR 16.46.1 Providing and laying in position bitumen hot sealing compound for expansion joints etc. per cm depth per cm width per m length 270.000

1.DS 16.68 Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. Sq.m. 350.000

1.DT 16.69 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). Cum 12.000

1.DU M16.75(16.75-5.37.1+5.1.2+16.43B) Providing and laying C.C. pavement of mix1:1.5:3 concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge.(The pannel steel (channel) shuttering is inclusive not to be paid sepreately) Cum 55.000

1.DV 17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lidW.C. pan with ISI marked white solid plastic seat and lid Each 3.000

1.DW 17.7.3 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps Each 3.000

1.DX 17.10.2.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board610x510 mm bowl depth 200 mm Each 1.000

1.DY 17.60.1.3 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 100 mm outlet 100 mm inlet and 100 mm outlet,Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 Each 15.000

1.DZ 17.60.2.3 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 100 mm outlet 100 mm inlet and 75 mm outletHubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 Each 20.000

1.EA 18.7.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.25 mm nominal outer dia Pipes Mtrs. 100.000

1.EB 18.8.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc 20 mm nominal outer dia Pipes Mtrs. 75.000

1.EC 18.10.5 Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc.40 mm dia nominal bore Mtrs. 20.000

1.ED 18.12.8 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.80 mm dia nominal bore Mtrs. 100.000

1.EE 18.17.1 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore Each 15.000

1.EF 18.17.3 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40mm nominal bore Each 2.000

1.EG 18.17.5 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :65mm nominal bore Each 2.000

1.EH 18.18.2 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm diameter nominal bore Each 2.000

1.EJ 18.19.3.1 Providing and fixing gun metal non- return valve of approved quality (screwed end) :Horizontal 40 mm nominal bore Each 2.000

1.EK 18.31.1.2 Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :18.31.1.2 Class II Each 1.000

1.EL 18.36.1 Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants,with C.I. surface box 350x350 mm top and 165 mm deep ( inside)with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick,With common burnt clay .P.S.(non modular) bricks of class designation 7.5 Each 2.000

1.EM 18.38.5 Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :40 mm diameter pipe mtr 20.000

1.EN 18.40.8 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :80 mm diameter pipe mtr 200.000

1.EP 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank per litre 7500.000

1.EQ 18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore each 12.000

1.ER 19.6.4 Providing and laying non-pressure NP2 class (light duty) R.C.C.pipes with collars jointed with stiff mixture of cement mortar in theproportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :300 mm dia. R.C.C. pipe metre 518.55 mtr 20.000

1.ES 19.7.7.1 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cementInside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions,total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 10.000

1.ET 19.7.2.1 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cementInside size 120cmx90 cm and 90cm deep including C.I. coverWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 5.000

1.EU 21.1.1.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) kg 400.000

1.EV 21.1.2.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 300.000

1.EW 21.3.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness sqm 50.000

1.EX 21.4.2 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing With brass cover plate minimum 1.25 mm thickness and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. each 5.000

1.EY 21.8.1 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.Upto 5mm depth and 5 mm width metre 100.000

1.EZ 21.16.2 Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-inchargePowder coated minimum thickness 50 micron aluminium nos 30.000

1.FA 22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a)First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b)Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. Sq.m. 45.000

1.FB 22.7.1 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:(a)Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment.(b)Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.(c)After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.(d)Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep.(d)The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge :With average thickness of 120mm and minimum thickness at khurra as 65 mm. sqm 300.000

NON SCHEDULE (B)

2.AA NS1 Providing and laying PWC-U SWR Type B pipes confirming to IS13592 including jointing of pipes & fittings with one step cement solvent including trenching refilling & testing of joints complete as per direction of engineer in charge (External work) 150MM DIA mtr 100.000

2.AB NS2 Providing and laying PWC-U SWR Type B pipes confirming to IS13592 including jointing of pipes & fittings with one step cement solvent including trenching refilling & testing of joints complete as per direction of engineer in charge (External work) 100MM DIA mtr 100.000

2.AC NS3 Supplying and fixing 560 mm dia cover with frame (Medium duty) nos 2.000

2.AD NS4 Udaipur green marble 18 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. sqm 2.000

2.AE NS5 Providing and fixing soil, waste and vent pipes :100MM dia PVCSWR PIPE as per IS13592 TYPE B mtr 100.000

2.AF NS6 Providing and fixing soil, waste and vent pipes :75MM dia PVCSWR PIPE as per IS13592 TYPE B mtr 100.000

2.AG NS7 Providing and fixing bend of required degree with access door, complete.100mmPVC-USWR as per IS 14735 Each 10.000

2.AH NS8 Providing and fixing bend of required degree with access door, complete.75mmPVC-USWR IS 14735 Each 10.000

2.AJ NS9 Providing and fixing plain bend of required degree/heel rest bend 100mm PVC-USWR IS 14735 Each 10.000

2.AK NS10 Providing and fixing plain bend of required degree/heel rest bend 75mm PVC-USWR IS 14735 Each 20.000

2.AL NS11 Providing & fixing single equal plain junction of required degree with access door, 100 x 100 x 100 mmPVC-USWR IS 14735 Each 20.000

2.AM NS12 Providing & fixing single equal plain junction of required degree with access door, 75mm x 75mm x 75 mmPVC-USWR IS 14735 Each 10.000

2.AN NS13 Providing and fixing terminal guard 100mmPVC-USWR IS 14735 Each 2.000

2.AP NS14 Providing and fixing collars PVC-USWR IS 14735,100mm Each 40.000

2.AQ NS15 Providing and fixing collars PVC-USWR IS 14735,75mm Each 50.000

2.AR NS16 Providing and fixing PVC CLIPS for SWR PIPES 100MM Each 60.000

2.AS NS17 Providing and fixing PVC CLIPS for SWR PIPES 75MM Each 40.000

2.AT NS18 Providing and fixing cup board shutters 19 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS:12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge Sq.m. 50.000

2.AU NS19 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, including testing of joints complete as per direction of Engineer in Charge.62.50 mm nominal inner dia Pipes Mtrs. 100.000

2.AV NS20 Providing and fixing snow white water closet (European type W.C. pan) with seat cover ,trap,with twin flush flushing cistern, , with all fittings and fixtures complete including cutting and making good the walls and floors wherever required CERA MODEL CAMPBELL including all fittings Each 9.000

2.AW NS21 Providing and fixing white vitreous china flat back half stall urinal with all accesories automatic flushing cistern CERA MODEL NO B2050104 nos 3.000

2.AX NS22 Providing and fixing counter top wash basin CERA Model No CALBURT Model no S2020137 and basin mixer CERA MODEL NO F2002461 including all fitting cutting and making good the walls wherever require Each 10.000

2.AY NS23 Providing and fixing towel ring CERA MODEL NO F5007105 Each 13.000

2.AZ NS24 Providing and fixing wall mixer with bend pipe for over head shower CERA MODEL NO F2002401 Each 9.000

2.BA NS25 Providing and fixing over head shower CERA MODEL NO F7020102 Each 9.000

2.BB NS26 Providing and fixing bottle trap of cera make MODEL F8060403 Each 13.000

2.BC NS27 Providing and fixing short body bib cock of CERA MAKE MODEL NO F2002103 Each 13.000

2.BD NS28 Providing and fixing angle valve CERA model no F2002201 Each 10.000

2.BE NS29 Providing and fixing GRC JALLI SQM 40.000

2.BF NS30 Providing and fixing MIRROR OF CERA MODEL NO B3510113 Each 12.000

2.BG NS31 Providing and fixing CORNER SHELVES CERA MODEL NO F5005103 Each 12.000

2.BH NS32 Providing and fixing TOWEL RACK CERA MODEL NO F5003101 Each 9.000

2.BJ NS33 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round PVC-U SWR pipes including bed concrete as per standard design:100 mm diam. PVC-U SWR pipe Meter 100.000

2.BK NS34 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round PVC-U SWR pipes including bed concrete as per standard design:150 mm diam.PVC-U SWR pipe Meter 200.000

2.BL NS35 Providing and fixing .PVC -U SWR gully trap complete with PVC -USWR JALLI with brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:125mm*110mm size P type trap With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 15.000

3.AA 1.10.3 Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq mm FR LS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable G.I. box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C Point 220.000

3.AB 1.11 Wiring for twin control light point with 1.5 sq mm FR LS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with 2-way modular switch, modular plate, suitable G.I. box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable etc. as required. Point 70.000

3.AC 1.14.1 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 x 1.5 sq.mm. + 1 x 1.5 sq. mm earth wire Meter 850.000

3.AD 1.14.3 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Meter 600.000

3.AE 1.14.4 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 x 6 sq.mm. + 1 x 6 sq. mm earth wire Metre 550.000

3.AF 1.18.2 Supplying and drawing following pair, 0.5 sq. mm FR PVC insulated copper conductor, unarmoured telephone cables in existing surface / recessed steel / PVC conduit as required

2 Pair Metre 170.000

3.AG 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid core copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed steel / PVC conduit as required. Metre 250.000

1.21 S/F PVC conduit: Supplying and fixing of following sizes of PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recess conduit as required.

3.AH 20mm Metre 1000.000

3.AJ 25 mm Metre 400.000

1.24 Supplying and fixing following modular switch / socket on the existing modular plate& switch box including connections but excluding modular plate etc. as required.

3.AK 1.24.1 5/6A switch Each 20.000

3.AL 1.24.4 3 pin 5/6 socket outlet Each 70.000

3.AM 1.24.6 Telephone socket outlet Each 10.000

3.AN 1.24.7 TV antena socket outlet Each 12.000

1.27 S/F modular boxes, base & cover plate: Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess as required.

3.AP 1.27.1 1 or 2 Module ( 75 mm x 75 mm) Each 30.000

3.AQ 1.27.2 3 Module ( 100 mm x 75 mm) Each 40.000

3.AR 1.27.3 4 Module ( 125 mm x 75 mm) Each 2.000

3.AS 1.27.4 6 Module ( 200 mm x 75 mm) Each 35.000

3.AT 1.27.5 8 Module ( 125 mm x 125 mm) Each 25.000

3.AU 1.26 S/F modular type blanking plate: Supplying and fixing blanking plate on the existing modular plate & switch box excluding modular plate as required. Each 20.000

3.AV 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection, painting etc. as required.( For light plugs to be used in non residential buildings.) Each 40.000

3.AW 1.32 S/F power plug point modular type accessories: Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc. as required. Each 60.000

3.AX 2.18 S/F 20A SPN MCB industrial socket outlet:Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 amps 'C' series, SP, MCB, in sheet steel inclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. Each 135.000

3.AY 1.33 S/F ceiling rose: Supplying and fixing 3 pin, 5 amp. Ceiling rose on the existing junction box / wooden block including connection etc. as required. Each 60.000

3.AZ 1.25 Supplying and fixing two module stepped type eletronic fan regulator on existing modular plate switch box including connection but excluding modular plate as required. Each 35.000

3.BA 1.38 Providing and fixing call Bell /buzer for single phase 230 volts complete as required. Each 10.000

2.4 Supplying and fixing following way,horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (HAvells/L&T/Schneider/Equivalent makes)

3.BB 2.4.1 4 way (4 + 12), Double door, horizontal TPN DB. Each 12.000

3.BC 2.10.1 S/F 'C' series, SP MCB: Supplying and fixing 5 amps to 32 amps rating, 240 volts, 'C' series, miniature circuit breaker, suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required (HAvells/L&T/Schneider/Equivalent makes)

Single pole Each 135.000

3.BD M2.13.1 Supply and fixing following rating, four pole, 415V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required – 32A Each 12.000

3.BE 5.9 Supply and laying 25x5 copper strip at 0.50m below ground as strip earth electrode, including connection, / terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of GI nuts and bolts and spring washer spaced at 50mm) Meter 50.000

3.BF 5.19 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing alongwith existing surface /recessed conduit/ submain wiring/ cable as required Mtr 200.000

3.BG 5.4 Earthing with G.I earth plate 600 mm X 600mmX6mm thick including accessories and providing mansonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc . With charcorl /cock and salt as required. . Each 2.000

3.BH 5.10 Supplying and fixing25x5mmG.I. strip in 40mm dia G.i. pipe from earth electrod all complete as per specification and direction of E/I. Meter 30.000

4.AA NS-1 Supply, Installation and testing complete of Philips make LED Recessed Panel Ceiling Light of panel cut size 595X595mm SQUARE model RC370BLED30S-6500G4LED60W60 or equivalent models of POWERGRID approved makes Each 10.000

4.AB NS-2 Supply, installation, testing and commissioning of LED tubelight 20W (Philips Astra Line 20-Watt LED Battern (Cool Day Light or equivalent)) complete with all accessories as required - of POWERGRID approved makes Each 60.000

4.AC NS-3 Supply, installation, testing and commissioning of LED tubelight 5W (Philips Astra Line 5-Watt LED Battern (Cool Day Light) or equivalent) complete with all accessories as required - of POWERGRID approved makes Each 15.000

4.AD NS-4 Supply, installation, testing and commissioning of bulk head fitting Complete with all accessories 10 Watt LED lamp as required ; make as per TS Each 10.000

4.AE NS-5 Supply, installation, testing and commissioning of wall mounted 12W LED Bulb (Philips Stellar Bright 12 Watt LED Bulb, Base B22 (Cool Day Light) or equivalent) POWERGRID approved makes with all accessories Each 100.000

4.AF NS-6 Supplying fitting and fixing 250 mm dia exhaut fan with plastic body and blade, self closing louvers in the fan, to provide off mode protection against birds etc. inclusive of all taxes royalty etc. all complete as per specification and direction of E/I. (WITH CEILING ROSE) Each 25.000

4.AG NS-7 Supplying fitting and fixing 1400 mm sweep ceilling fan high quality & high speed, heavy duty ,(approved make) inclusive of all taxes royalty etc. all complete as per specification and direction of E/I. Crompton/CGL/BAjaj/Havells/Usha/Philips makes Each 35.000

4.AH NS-8 Supplying fitting and fixing 1200 mm sweep ceilling fan high quality & high speed, heavy duty ,(approved make) inclusive of all taxes royalty etc. all complete as per specification and direction of E/I. Crompton/CGL/BAjaj/Havells/Usha/Philips makes Each 10.000

4.AJ NS-9 2mm CRCA Indoor Distribution board alongwith 1 No.100A MCCB for Incoming and 4 Nos. 32A MCCBFP for outgoing consisting of suitable rating of Alu Busbar EAch 4.000

4.AK NS-10 2mm CRCA Indoor Panel alongwith 1 No. 250A MCCB 4P 36kA with Extended Handle & Spreader for Incoming and 3 Nos. 125A MCCB 4P 36kA with Extended Handle,Spreader forr outgoing consisting of suitable rating of Alu Busbar. This also includes supply and installation of 3-phase energy meter EAch 1.000

4.AL NS-11 Supplying, installation, testing and commissioning of following sizes and core PVC /XLPE insulated PVC sheathed ,heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts (Powergrid Approved make cables) 300sq. mm , 3.5 core Meter 100.000

4.AM NS-12 Supplying, installation, testing and commissioning of following sizes and core PVC /XLPE insulated PVC sheathed ,heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts (Powergrid Approved make cables) 70sq. mm , 3.5 core Meter 100.000

4.AN NS-13 Supplying, installation, testing and commissioning of following sizes and core PVC /XLPE insulated PVC sheathed ,heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts(Powergrid Approved make cables) 4Cx16 Sq-mm Meter 500.000

5.AA NS-14 Supply installation, testing and commissioning of street light fixture type Sl-L1 as per TS (45W) (Phillips, Bajaj, Havells, Insta, equivalent) (With all required accessories for fixing and earthing) Each 10.000

5.AB NS-15 Supply installation, testing and commissioning of Lighting Fixture: Type SL-D1 as per TS (30W) Post Top Lighting Fixture (With all required accessories for fixing, termination and earthing) as per TS (Phillips, Bajaj, Havells, Insta, equivalent) Each 5.000

5.AC NS-16 Supply installation, testing and commissioning of Supply installation, testing and commissioning of GI Pole 6 Mtr (With all required accessories for Termination, fixing and earthing) as per TS (SL-L1) Each 10.000

5.AD NS-17 Supply installation, testing and commissioning of Supply of D1 Pole 4 Mtr (With all required accessories for fixing and earthing) as per TS Each 5.000

5.AE NS-18 Supply Installation testing and commissioning of Sub Lighting Panel Incomers: 4 pole 32A TPN MCB suitable for 415V AC supply Outgoings: 8 nos. terminal blocks suitable for cable upto 16 sq. mm cable. Mounting: Suitable for Outdoor applications with Loop in and Loop out facility. Each 2.000

5.AF NS-19 Supply, installation, testing and commissioning of 1.1kV 2C x 6 Sq-mm PVC cable Mtrs 500.000