33/11 S/S Railway ABT Meter

Amount

Part - A Supply of Materials (Provided by Contractor)

33 KV PT ALP Structure

33 KV CT ALP Structure

conduit pipe

Top channel with clamp

M.S. Angle Iron 65x65x6mm bracing with clamps.

Aluminium Paint.

Bolts, Nuts & Washers.

Red Oxide Paint.

Stay Rod 20x1800mm

Stay clamp with nut & bolt

Stay wire 7/8 SWG

PG clamp for Dog

Armoured copper control cable 2 x 2.5 mm2

Armoured copper control cable 4 x 2.5 mm2

3X300 mm² XLPE C/J Kit Outdoor 33 KV

Part - B (Work) Shifting, Loading Carriage & Unloading of following materials from store centre Gorakhpur to work site

33 KV PT (0.2 acc.class)

33 KV C. T (0.2 acc.class)

S.T. Pole 9 M long.

ACSR Dog Conductor

33 KV VCB 800A, 750MVA

33 KV C.T 400/200/1A

Structure for C.T.

Structure for VCB

33 KV Line Isolator

Structure for LSI

33 KV Lightening Arrestor

33 KV Lightening Arrestor Structure

3x300 mm² XLPE Cable 33 KV

Erection of Double pole structure on 11 mtr ST Pole for 33 KV Line, including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. bracing angle iron with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing etc. complete work) .

Laying of 33 KV 3x300 mm² ‘XLPE’ cable(D/C) by digging pit & making trench in Proper size (1.2M depth x1.2M wide) below ground level by fixing bricks(4½˝) on both side of trench wall and 9˝ brick work at the centre of the trench along the cable. Fixing brick slab on top after filling sand around both the cable including cost of bricks and sand/ as per site requirement HDD mathod can be used.

Jointing charge of 33 KV ‘XLPE’ C/J Kit 3x300 mm² Outdoor

Laying of 33 KV ‘XLPE’ cable in air after providing 6” dia.M.S. pipe 3m long Complete work.

Special Pipe earthing for 33 KV Jointing Kit. (provided by contractor)

Special grouting and earthing for ALP structure.

Charges for making Plinth and foundation of VCB, CT and PT structure with earthing complete.

Painting of Structure complete

Installation of VCB, CT and PT, wiring and earthing complete work

Erection, grouting and earthing of LA & LSI structure.

Installation of LSI and LA and earthing complete work

laying control cable through conduit pipe by digging trench in switchyard including cost of sand and 1st class bricks with covering and making connection complete and including cost of laying. (conduit pipe provided by contractor)

Jumpering of all related connection of with ACSR Dog coductor

Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

M/s Electro Shine India

M/s S.B.S. Traders